I am doing work on serial port. I want to send/receive data to/from Microcontrolar through serial port. But I don't know how to initialize, receive and send data to Serial port. i am new in fedora so i hav'nt any deep concept of fedora.can anyone send me C code , which communicate through serial port in fedora (or atleast help me). I am using Fedora 11.
View 6 RepliesI am not a profession programmer. I have to write a C code which send some command to attach display using C program. Can any one please help me in this regard.
View 3 Replies View RelatedI am using read() in c++ to get data from a serial port. However, if no data is available on the serial port the function blocks until dta arrives.Example code:
//------------------------------------------------------------
char m_readBuffer[255] = {0};
char* p_curChar = m_readBuffer;
[code]...
I want to send something through the serial port, for example
[code]...
the point here is send some numbers to a couple of 7 seg displays, so I will wire a RS232 chip on a protoboard, the logic after the RS232 is not an issue, but how can I assure the data is being sent right from my linux box to the RS232 chip, the one on the protoboard? Do I have to write a C program to read the strings and then send them to the serial port?For example if I wanted to send this to the displays:
[code]...
So I guess the simplest way is (Supposing I can deal with the stream so it is filtered and only display the number array) $ ifstat > /dev/ttyS0 But, how do I know if the RS232 will take them as the right characters?
I dont know if this is the right forum, But I try to find a solution, I want to intercept data from/to serial port without disrupting the software that manages the serial port, (I would like to save the data to a file or sent into a socket) I searched somes modules and programs (linspy, ttysniff, interceptty, maxty ...), A bit complicated (There are some diff. between kernel 2.4 and 2.6), So I'd like to change the serial port driver to intercept the "read" and "write " and do what I want with the data, I'd like to know what do you think about
View 3 Replies View RelatedI have got a problem while reading from the serial port. I'm working on iMX-31 board and Eclipse IDE. Whenever I'm trying to read any data through the serial port, it's displaying I/O Possible and the application is being terminated. After reading I'm trying to write this data on a file. Here are the excerpts from the code:
# int main()
{
if (openport()<0)
[code]...
I have connected a device to my linux system with a serial cable (rs232). The settings are: port /dev/ttyS0, baud rate=38400, data bits=8, stop bits=1, no parity, no hardware or software handshaking. I wrote a linux program that sends 1 byte to the device, but the device doesn't receive it. I know the serial ports are working because when I use the CuteCOM application to send data, the device DOES receive it, so obviously it is a problem with my code..
Code:
#include <stdio.h>
#include <stdlib.h>
#include <math.h>
[code].....
i want to try with a small application in linu in that i want to read some data from controller using serial port and i wanna transfor that data to another meachin in the network for this i want serial port interfacing programming as well as socket programming.
View 1 Replies View RelatedI am writing a C program which reads data over serial port. While reading data, if I send my data(which is a 13 byte structure) periodic with a period of 1 second for 10 times I read it without problem and I read the data 10 times as I sent and as I expectBut if I send data continuousuly(without any time interval between each sending) 10 times I can only read 1 of them(I can only read it once).
View 11 Replies View RelatedI am implementing a simple serial protocol where my ARM9 board, running Linux is communicating to a slave peripheral board. The Master sends a 12 byte data stream and the peripheral board returns status in a 23 byte response. The serial port is opened in raw mode. It works perfectly on 44 reads; however, on the 45 read the data returned from the read() is incorrect. I've framed what's being sent on an oscope and it is correct.The coincidence is that 23 x 44 = 1012. It's as though the receive buffer is 1K and when I go past the boundary I get bad data. The read following the bad one is good again.I've tried flushing the buffer before reading but get the same result.Here's the port initialization code:
Code:
int initport(int fd)
{
[code]...
trying read serial COM port and want to write that received data to file, now its writing only one sentence, but i want to write full file which coming on serial port, as i'm sending file from hyper terminal and reading on linux pc, If i put while loop its not writing anything,without while loop its writing only one line and if send big file then application terminates and then writes to file.But i need do write any size which coming on serial port.Finally i want write full file which is coming on hyper terminal, after writing the file it has wait for next data. This is my code,
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]...
I wrote a serial port communication program to access a equipment.
int main(void)
{
int fd = 0;
int nread = 0,i = 0,nwrite = 0, tmpread = 0, m = 0, n = 0 ;
[code]....
I have an application where I am sending data via serial port from PC1 (Java App) and reading that data in PC2 (C++ App). The problem that I am facing is that my PC2 (C++ App) is not able to read complete data sent by PC1 i.e. from my PC1 I am sending 190 bytes but PC2 is able to read close to 140 bytes though I am trying to read in a loop.Below is code snippet of my C++ AppOpen the connection to serial port
Code:
serialfd = open( serialPortName.c_str(), O_RDWR | O_NOCTTY | O_NDELAY);
if (serialfd == -1)
[code]...
I have a Linux based board which has one serial port (so, stdin == stdout == stderr == /dev/ttyS0). I want to send Firmware over a serial port using Y-Modem protocol. But, when I poll on given fd (after sending ASCII 'C') its got time out. I am using HyperTerminal which is connected to my board's serial port. So, neither the HyperTerminal (only when it has launched dialogue box to send firmware to the board using Y-Modem) able to read data send by the board nor board able to read data send by the HyperTerminal. But when I type on HyperTeminal then the board got the key-strokes (thats why I can atleast browse through the GUI).
The same serial port is being used to render (VT100 based) GUI. I have managed to disable printk(s) after user-mode is up & running.
I have a Dell laptop with a bcm4312 wireless card. Every once in a while though, the laptop is unable to send or receive any data for 30 seconds. The connection is not dropped, and nothing shows up in any system logs. Both the wl and b43 drivers have this problem, but it works fine under vista.
View 1 Replies View RelatedI am trying to send text data from one PC to other using Serial cable. One of the PC is running linux and I am sending data from it using write(2) system call. The log size is approx 65K bytes but the write(2) system call returns some 4K bytes (i.e. this much amount of data is getting transferred). I tried breaking the data in chunks of 4K but write(2) returns -1.My question is that "Is there any buffer limit for writing data on serial port? or can I send data of any size?. Also do I need to continously read data from other PC as I write 4K chunk of data"Do I need to do any special configuration in termios structure for sending (huge) data?
View 4 Replies View RelatedHow can I send and receive packets using libpcap, reply as early as possible.
View 1 Replies View RelatedI'm trying implement a small server for a university work, my server is creating, binding and listening but it don't accept any connection, these are the files I'm using in server:
Code:
// Definition of the Socket class
#ifndef SOCKET_H
#define SOCKET_H
#include <sys/types.h>
code....
I've made a client just for test it, but no ones run well, the server is always returning -1 when accept is called!!
What should I do to send and receive messages in this server??
We are trying to create a message forwarder program that receive a message on Port A and pass it on t Port B. Also receive a message from Port C and Pass it on to Port D as follows.
[Code]...
I have found many examples out on the www for creating udp servers with sockets. The problem I am running into is after I receive the packet from a host I need to be able to send a custom made packet(I'm using RawIP / NetPacket to make my packet) back to this host. The only way to do this is seemingly through the send() function. This function however doesn't appear to allow me to specify which host to send my packet to.
View 2 Replies View RelatedA bit clumsy subject, but I would like to make a script, which is able to send and receive email messages from CLI. The script should work like this:
1. read user input from stdin(for example a mail address)
2. send mail over SMTP(SSL, port 465) to a mail server
3. mail server sends an automatic response, script should just display this response email sent from mail server over IMAP(port 993)
At the moment I have a fallowing configuration in my Thunderbird:
Code:
IMAP mail.domain.com SSL 993
SMTP mail.domain.com SSL 465
Is it possible with 'mail' utility? Do I need to configure some sort of MTA at first(I use SUSE and I have Sendmail installed by default)? What are the steps, to get this script working?
can we use inb() and outb() functions for serial port programming ??
View 5 Replies View RelatedI'm using C serial in a program to open and use a serial port but the port won't open for one reason or another. The program successfully runs on a different computer and when using RealTerm: Serial Capture Program, I can connect through the serial port with the same settings as I'm attempting through my c code. Anyone have any idea why it might be failing? I know this is still pretty vague, so let me know if there's other things I can tell you that might help to finding a solution
View 3 Replies View RelatedI am trying to send data through a USB port to a printer which can recieve text file. Now to send the data to the printer I am doing echo "Hello World" > /dev/usb/lp0
but the data doesnt seem to be sent to the printer because I have an analyzer to monitor the data sent to the printer. Is there anything else which I need to do
I am trying to write some code that interfaces with an AVR over a serial port. Basically I send a command then read the output which is 6 bytes. I need to receive all 6 bytes before the program continues. Is there a way to do this? If I use read() it returns -1 unless I add a delay before reading the port. Is there a way to get it to read the 6 bytes as soon as they arrive?In python you simply say how many bytes you want and the max time you are willing to wait which seems a whole lot easier than read
View 1 Replies View RelatedI have an application written in C (by somebody else) monitoring a device connected to a serial port. I'm using an old laptop w. tinycore linux for an os. The app works well enough, and the communication speed is relatively slow, 9600bps, unidirectional, comes in packets of 18 bytes. The app is just picking apart the packets and displaying the contents on a formatted screen (ncurses), updating about once every 1/2 second. The trouble is, the app is polling the serial port and using *all* of the cpu bandwidth. The cpu fan runs full bore all the time.
Other activities are sluggish when the monitoring program is running. I'd like to modify the app to be a little more intelligent, use a receive buffer and interrupts to trigger processing each packet and, most importantly, not poll in a tight loop waiting for data. I'm not sure where to start, but I'm convinced this isn't that complicated of a change. Is there a good resource that would explain the basics of reading data from serial port software buffers, triggering on interrupts and suspending or sleeping when no interrupt is pending?
I'm attempting to write an application that needs to read and reply to messages that will appear via 3 different methods:
1) Standard serial communications
2) TCPIP over serial via PPP
3) TCPIP over Ethernet
The problem is that I'd like for the application to be able to receive packets from any and all of the three interfaces simultaneously. I shouldnt have much trouble with performing #1 and #3 at the same time, as I think I can just get a file descriptor from termios and another for a socket and then use select to wait for data. But #2 is problematic.
First I dont know how to set up a socket that uses PPP as the data link layer. And secondly, (here's the big one) this PPP data is coming over the same port that the serial data is. There's no chance for data collision, and I am guaranteed not to receive another packet until I respond to the last one (in the same protocol at that) but incoming packets may or may not be PPP/TCP/IP framed.
My app will act like the PPP client, so I was just thinking "somehow" that I could run a standard termios application on the serial port which would begin to interpret the packet. If its PPP framed then it would have to get passed to a PPP client, which would be listening to my application rather than a physical port. And I have no idea how to do that. Is there an API available that will help me with the PPP packets?
How hard would it be to write a device driver that simulates a serial port. The device can listen on a real serial port, interpret its contents to an extent, and then distribute the incoming data to multiple "virtual" serial ports, which the main application can then listen to for incoming traffic.
I'm trying to open ttySx from an interrupt.the kernel crashes. is it possible to open/write to serial port from interrupts ? I think it crushes because when I try to open the device there is a mutex lock which cause the kernel to crash , am I right
View 2 Replies View RelatedI had a web server running from a Windows 7 computer and recently moved everything to an Ubuntu server. All is set up and running smoothly. I do have one page that actually interfaces with the serial port. The only thing I do with it is to set the DTR pin to "true" which applies +12v to the pin. This activates a relay. It is very basic and simple. After moving everything to Linux, this page will no longer work. I knew this would happen. I know the page had code in it to call out "Com1" which would change to "ttyS0". It also had "set_serDTR(True);" in the code. I can't figure out how to get PHP to control the DTR pin on a Linux serial port.
View 10 Replies View RelatedI want to write data to serial port ( ttyS ) from inside the kernel.
View 5 Replies View Related