OpenSUSE Network :: Disable Ping On The Firewall?
May 27, 2010I did a shields up test and it told me that 1056 ports were stealth but that my pc responded to ping and was visible on the net. How do i fix this?
View 4 Replies
ADVERTISEMENT
OpenSUSE Network :: Disable Ping On 11.4?
May 21, 2011Basically i want the opensuse firewall to stop responding to pings-how do i do this?
View 2 Replies View RelatedOpenSUSE Network :: When Disable Firewall / Delayed Messages Can Again Be Sent
Sep 14, 2011I have been running Senmail on SuSE 11.1 for the last few years with no problems.Since installing SuSE 11.3 a few months ago I have been having problems getting Sendmail to send to some (only a few) servers.If I disable the firewall # SuSEFirewall2 stop.I can send successfully using # sendmail -v -q, or # sendmail -v -qIxxxxx.When I re-enable the firewall I will start to get the timeouts/temporarily unavailable messages again (but as mentioned above, only for some servers) even though I can successfully telnet these servers when the firewall is on. When I disable the firewall the delayed messages can again be sent.Has anybody any ideas what I need to change (presumably in the Firewall) to get things working correctly? 'SMTP with sendmail' is already selected under 'Services to Allow' under YaST Firewall->Allowed Services..
View 4 Replies View RelatedOpenSUSE Network :: Nmblookup Resolves But Cannot Ping Netbios Names Or Ping FQDN
Feb 23, 2011This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies View RelatedOpenSUSE Network :: Firewall Logs Are In /var/log/{firewall,warn,messages} - Clutter?
Mar 25, 2011I suspect this is an initial configuration bug. All firewall logs seem to be going to all
three files. That causes a lot of clutter in the log files, and makes it difficult to see whether there are any serious problems being logged.
OpenSUSE Network :: Can't Ssh Remote Hosts / Can't Ping Any Machines Outside Local Area Network?
Aug 29, 2010I just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
View 4 Replies View RelatedOpenSUSE Network :: Unable To Ping The Default Gateway When Using Custom Settings - Unreachable Network
Jul 17, 2011I installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies View RelatedOpenSUSE Network :: Weired Ping Problems In Working Network?
Feb 13, 2011I'm new to SuSe and lateley I was trying to establish a Network, when some weired problems occured. I was able to establish the network and i have connection to the internet. The suse-machine is rechable by ping from all the other computers in the network. If I'm tryiing to ping the other computers from the suse-machine, nothing happens. The router responds without packet loss, but every other ping occurs in:
From 192.168.2.6: icmp_seq=2 Destination Host Unreachable
From 192.168.2.6: icmp_seq=3 Destination Host Unreachable
From 192.168.2.6: icmp_seq=4 Destination Host Unreachable
From 192.168.2.6: icmp_seq=5 Destination Host Unreachable
I've been searching for some ideas to solve this problem but couldn't find any.
OpenSUSE Network :: Increase Network Security> Personal Firewall?
Apr 7, 2011I want some advice for making my system more secure. I want deactivate any network connection that is unnecessary. Only my browser and the update ability of zypper should have access to the internet. On windows there are personal firewalls.
How can I block internetaccess for all other programmes on openSUSE?
OpenSUSE Network :: Samba And Firewall / Samba Is Not Working When Firewall Is On?
Jul 26, 2010Samba is working correctly if Susefirewall2 is off. I have added Samba client and Samba Services for extern access but samba is not working when firewall is now on. Which services should I also add ?
View 1 Replies View RelatedOpenSUSE Network :: How To Allow A User To Do Ping
Jan 11, 2010how can I allow a non-root user to do ping?
View 6 Replies View RelatedOpenSUSE Network :: How To Ping Between Guest Oss
Mar 14, 2010i am doing a project in which i have to use xen to create virtualised environment.I have already done this.
now i am using the following setup
host os :- opensuse 11.1with ip 192.168.9.19 and with aliasing ip 192.16.9.14
guest os1:- opensuse 11.1 with ip 192.168.9.107
guest os2:- opensuse 11.1 with ip 192.16.9.13
[code]....
OpenSUSE Network :: IP Range In Firewall?
Mar 29, 2010I am trying to add a custom allow rule in the firewall for a range of IPs from 74.201.102.0 - 74.201.103.255, what exactly am I supposed to enter in the source box? I believe I have to add two separate rules for 102 and 103, and I put /24 at the end of both, is this correct to get the whole range of IPs?
View 3 Replies View RelatedOpenSUSE Network :: 11.4, CUPS, And The Firewall?
May 25, 20111. Under openSUSE 11.2, I allowed printer sharing through CUPS by setting the Firewall to Allow Services of CUPS in the External Zone section. I don't see the CUPS option in the Allow Services of the Firewall under 11.4, any zone. Is my system missing something?2. If I turn off the Firewall, the client computer can see the printers, even get the broadcasted names. If I put port 631 in TCP of the Advanced setting of the External Zone, the client computer can see the printer too, but I know I read somewhere that putting 631 in the External Zone is basically allowing printer requests from the entire internet.
View 2 Replies View RelatedOpenSUSE Network :: 11.2 Acting As Router Firewall
Mar 29, 2010switched recently to 11.2 and it works fine for me as workstation I want to set up a router separating a part of the network and also acting as a firewall/proxy... Configured 2 Ethernet Interfaces, checked Ip forwarding in Yast but it does not forward the packets from the "internal" to the "external" network. Hovewer after I set up my router as default for machines on internal network I can ping the external interface but no adress on external network (particularly the one of the default router) !!! From the router I can reach both networks and the net via default gateway on external. Tried to:
a) switch firewall completely off
b) iptables -P FORWARD ACCEPT
c) masquarading internal adresses to the external network
my interfaces configuration looks like:
eth0 Link encap:Ethernet HWaddr 00:13:D4:E3:A2:7B
inet addr:192.168.1.34 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:d4ff:fee3:a27b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code].....
OpenSUSE Network :: 11.2 Users - Check Your Firewall
May 19, 2010We have reason to ask this of you following some strange firewall behaviour - But don't panic If you use openSUSE 11.2 and you think: Your Firewall should be running You are not sure but think it should be check and report back here.
This is how to check:
Go to Yast > Security and Users > Firewall
OpenSUSE Network :: Allow Openvpn Service In Firewall?
Jul 13, 2010I can't get my openvpn work if the firewall is on , and I also don't see any option to allow openvpn service in firewall allow service.
View 1 Replies View RelatedOpenSUSE Network :: Firewall Setup For OpenMPI - Can't Get To Run
Jul 24, 2010I'm trying to get OpenMPI (a parallel programming library) working on my home system. I have just two machines on it now, t61 and quad, connected through a router. (Which is also connected to cable modem for internet.) I can ssh between the machnes, mount directories with NFS, etc. However, I just can't get the OpenMPI to run. The OpenMPI message board suggested that the most probable cause is that the firewall is blocking TCP. I don't know how to tell if that's the problem, and can't find any manual for the SuSE firewall, while the various Wikis &c that pop up in a search don't provide any information that addresses my problem.
View 9 Replies View RelatedOpenSUSE Network :: Blocking SMTP On Firewall?
Aug 19, 2010Ok here's my setup :
SuSE 10.0 X86 32 acting as my internet gateway and firewall.
eth0 is my internal interface network 192.168.0.0/24 IP 192.168.0.254 dsl0 is my internet connection and is a single ip PtP connection to my ISP.
My internal network is masquaraded onto the external network.
I run an smtp server on my gateway box that I need to be accessable to both the internal and external networks.
However I want to prevent machines on the internal network from establishing connections to external smtp servers, but still alow them to connect to the smtp server on the gateway to send email.
NOTE I do not want to force attempts to connect to [URL] 25 to be re-directed to my internal server I just want to drop or reject the connection.
The firewall up until now has just been configured through YaST, but am not afraid to edit script files if needed
The reason for doing this it to prevent spambots from being able to send through my isp, I keep my own machines clean but sometimes get asked to disinfect machines for other people (family members etc), where I need to connect to the outside world to get updates/virus defs etc, but don't want them spamming from my network.
OpenSUSE Network :: Firewall Rules For Specific OS?
Aug 26, 2010can I deny the access to my server for a specific OS? I have one PC which I want to give it acces from winxp, but if it's boot into ubuntu I want to deny all access to my server, same IP, same ethernet card
View 8 Replies View RelatedOpenSUSE Network :: Suse Firewall Blocking Vnc Over Ssh?
Sep 8, 2010I've setup vnc over ssh tunnelling however the Suse firewall seems to be blocking it. On the local host I have this in ~/.ssh/config:LocalForward localhost:5900 remotehost.com:5900 The problem is that this only works when I either disable the firewall or add an exception for VNC. Both of these actions defeat the whole purpose of ssh tunnelling since they leave my VNC port open to the outside world (very insecure).
View 2 Replies View RelatedOpenSUSE Network :: Accessing A Machine Behind A Firewall?
Oct 22, 2010I'm in the situation where I'm trying to create 2 private networks using ESX server, all behind a NAT router (static ips are used). I used an openSuse11 vm as a router and was able to configure it so that a machine on one private network was able to access the public network. The problem I have now it that I need to be able to access a machine on the private network from the public network using a different set of IP's.
So if a machine in the private network has an IP of 10.1.0.222 I should be able to ping it using 10.99.0.222 or some other IP. I have never done this before and after reading up on iptables and linux routing I feel more confused than before. Is it possible to add IPs to eth0 (public) and have them mapped to machines on a private network eth1 or eth
OpenSUSE Network :: How To Configure YaST Firewall
Mar 5, 2011I'm looking forward to the release of openSUSE 11.4, which I'm looking to install as an Internet facing gateway on a mini-ITX machine with 2 Ethernet cards. As such I've been reading up on the YaST Firewall trying to find out to configure it, and there's one thing I'd like to be able to do: 'stealth' all the firewall ports.
In other words, if someone were to hypothetically do a port scan of my external IP address, I would rather they not know whether any of the ports on my gateway are open or closed, so instead of replying with the status of those ports the packets get dropped. I've been able to do this with a product called Astaro Security Gateway, which I currently have installed on a second hand Dell Optiplex machine, but I am now looking into the possibility of installing this as a virtual machine inside an openSUSE 11.4 host (extra level of security) and would like the same functionality for the host OS.
OpenSUSE Network :: How To Block An Outgoing Firewall
Mar 11, 2011How I can refuse an outgoing connection on opensuse firewall by default outbound policy is permissive, and the p2p I explicitly deny an outgoing, according to protocol, remote port and local port.
But I can add rules as how to run opensuse firewall rules are permissive only for inbound traffic and so I can not specifically deny an outgoing connection.
Before using fwbuilder is very powerful and configurable but now I'm with suse for convenience but want to know if you can do what I want, if not I will have to use fwbuilder.
OpenSUSE Network :: 11.4 New Install, How To Operate Firewall?
May 25, 2011I have done a new install of 11.4 and as with previous versions, I have to go to YAST2 and disable the firewall before I have internet and local network access. Finally I must find out how to do this correctly.
How to I change the default firewall to allow me internet and local network access without disabling it completely? Also I am unclear about the function of Novel Network Armor? What does this do?
Fedora Networking :: Can't Ping External IPs (no Firewall, Web Works)?
Jun 17, 2009Since I installed FC11 I can't get vpnc to work (I always getno response from target").Also I can't ping any external IP even with the firewall disabled.What I see strange is that I had the same configuration in FC10 and the router configuration seems okay to me:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0
[code]...
OpenSUSE Network :: Ping Between Two Guest Os On Two Different Subnet Masks
Mar 15, 2010Step 1 : In Hyper-v Machine i have created two Virtual Ports.
Step 2 : Now for these two diff ports two ip address with different subnet mask(e.g 192.168.9.19 and 192.16.9.20)have been assigned(and have checked using ifconfig).
Step 3 : In Host machine i have added one subnetmask for one machine next one for another machine,however i m not able to ping both the ports from either of the machines having static ip 192.168.9.13 or having ip 192.16.9.107.
Step 4 : If i add same subnet mask for both machine it is pinging properly between 2 machines.
OpenSUSE Network :: Host Names Cannot Be Resolved Except For Ping
May 5, 2010I'm running openSUSE 11.2 (Linux piura 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux) and have a network problem. At work, ethernet works fine. When I plug it into my DSL router at home (which works with other computers), I encounter the following behavior: ping can resolve host names, however, traceroute and Firefox and Thunderbird cannot.
It happens for both wired and wireless connections.
OpenSUSE Network :: Unable To Ping Up And Working Computer On LAN
May 11, 2011unreachable computer's ifconfig reports xxx.xxx.xxx.37 but when I ping that address from another computer it says "Destination Host Unreachable" (all the other computers on the LAN can ping each other except this one particular computer)I can ping other computers from the unreachable computer just fine...
View 9 Replies View RelatedOpenSUSE Network :: 2nd IP Adresse On Eth0 But Different Firewall Zone?
Jan 30, 2010I tryed to setup a second IP address with yast on a openSUSE 11.2 on eth0 as eth0:2nd but with a different firewall zone. But SUSE firewall just see eth0.
I want to define with services are available on with IP address. Also with custom rules I can't specify a destination IP.
So now can I do this with yast? Or have I todo this manually without SUSE firewall?