Ubuntu Networking :: Use The Firestarter Firewall?
Sep 26, 2010i connect to internet with the connection (with Name: DSL Connection 1) that made by myself. now i wanna use the firestarter but i have a problem.
View 5 Replies
ADVERTISEMENT
Networking :: Firestarter Firewall And Connection Sharing?
Jul 22, 2010I am trying to set up a computer to act as a firewall/gateway on my network, and am using the Firestarter program to do this. Everything appears to be set up correctly, and I followed the instructions on their website completely, and I get an error message when I try to start the firewall. It says that eth0 (my internal NIC) isn't ready, and to make sure it's active.
View 3 Replies View RelatedFedora Networking :: Send Data/ping Pc4 From Pc1 Via Pc2 And Pc3 Using Firewall Firestarter?
Aug 23, 2010I am a bit new to fedora I have the following scenario in testbed of mobile ad hoc network
pc1 pc2 pc3 pc4
192.168.1.1 192.168.1.2 192.168.1.3 192.168.1.4
Now I have the source as pc1 and pc4 is destination and I want to send data/ping pc4 from pc1 via pc2 and pc3 using firewall firestarter,
Ubuntu :: Firestarter Firewall Is Blocking Mozilla
Oct 6, 2010I updated my system with system updates and when i restarted.I couldn't access the internet from my desktop. i got on laptop internet worked just fine..i disabled firestarter and mozilla connected to the internet just fine. I turned firestarter on. and i couldn't reach anything.. What do I have to do to get firestarter to allow me to connect to the internet via firefox
View 3 Replies View RelatedDebian Configuration :: How To Configure Firestarter Firewall
Dec 16, 2010how to configure my firestarter firewall. I have a website which requires the port 1935 to be open. I figured out how to open the port using firestarter. Is there anyway to make the port open only to this website, and not to every other website for security reasons of course.
View 4 Replies View RelatedSecurity :: Firestarter Firewall Presentation Handout?
Feb 3, 2011I gave a presentation on the Firestarter Firewall interface at my local LUG meeting tonight (another member followed with a presentation on iptables).You can download a copy of the handout from this link.
View 3 Replies View RelatedSoftware :: Firestarter Good Basic Firewall?
May 2, 2011I was just wondering if anyone uses 'Firestarter' firewall, and what you think of it?
View 13 Replies View RelatedSoftware :: Run Firestarter Firewall But Keep Getting The Message ETH0 Is Not Ready?
Jul 26, 2011I am trying to run Firestarter firewall but keep getting the message ETH0 is not ready. This problem has been highlighted by others but is there a simple way of sorting this out, answers in other forums are wide and varied. but it's not clear if they have been successful.
View 7 Replies View RelatedFedora Security :: Firestarter Firewall Manager Keeps Crashing After About 5 Minutes. Restarts, Runs For A While, Then Crashes?
Apr 12, 2009Have homebrewed machine, was running Fedora 8. Installed Fedora 10.Firestarter firewall manager keeps crashing after about 5 minutes. Restarts, runs for a while, then crashes.Thought it might be an IPTABLES turf war with the native Fedora 10 gui firewall manager, so disabled that at System > Admin > Firewall. Also disabled SElinux. Still have problems.Firestarter firewall seems to work OK, just the gui Firestarter monitor/manager.If anyone has ideas as to cause, I'll take a clue.I could use Firestarter to generate the IPTABLES by ..manually editing the /etc/firestarter/inbound|outbound/allow-.. files and then../etc/init.d/firestarter restartBut I find the events log useful to look at. Anyone know where the events log file is kept in the file system?
View 4 Replies View RelatedDebian Configuration :: Installed Firestarter Firewall On Debian Squeeze?
Apr 5, 2011I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedNetworking :: Setup Firewall / Sys1 Is Not Connected To Firewall For Testing Purpose?
May 18, 2010I am learning to setup firewall in my home for that i have selected four system(sys1,sys2....sys4) for testing .I have configured sys2 to act as a firewall with two NIC. sys3 and sys4 are inside the firewall . sys1 is not connected to firewall for testing purpose.
the IP assignments are follows :
sys1 : ( fedora, not connected to firewall i am thinking, But i am not sure )
IP : 192.168.2.1 ,
gateway : blank
dns1 : blank
dns2 : blank
sys2 firewall ,IPTABLES )
code....
what happened is that sys1(not connected to firewall) can ssh to sys4(connected,inside firewall),since the rules are written not to ssh form sys1 to sys4..
then I came to know whatever the request I give, It directly goes as sys1 --> sys4. Not as sys1-----> sys2(firewall)---> sys4 .and the firewall is not filtering and processing anything for both inbound and outbound (i think it's my mistake some where). the requests are directly going inside without firewall.
Ubuntu :: Firestarter Removal - Error "zooming Up The Screen Containing Firestarter In It"
Feb 5, 2010I installed firestarter and then at a later date uninstalled/purged it, both actions via synaptic. I have a very verbose boot, I like to see what's going on, and noticed after the uninstall/purge that I was getting an error zooming up the screen containing firestarter in it. After many restarts I found that a file was left in /etc/network/if-up.d/50firestarter and this file was simply a script trying to restart firestarter. At this point I've commented out the calling line and followed the commented line with exit 0. This removes the error but there's still a link calling the file so, is this a bug or am I missing something? It appears the uninstall/purge wasn't entirely complete.
View 1 Replies View RelatedUbuntu Networking :: Firestarter Blocks 192.168.1.1 And 100?
Jul 23, 2010I have wireless connection between my router and PC. It is the only computer connected. Sometimes Firestarter blocks ports 1900 and 6771 from 192.168.1.100 IP address and sometimes port 68 from 192.168.1.1 IP. I'm a bit confused because 192.168.1.100 is the IP addres i use to open ports in router and 192.168.1.1 is used to access the router settings..
View 7 Replies View RelatedUbuntu Networking :: How To Allow DAAP In Firestarter?
Oct 22, 2010I allowed ports 3689 and 5353 for incoming and outgoing traffic in firestarter but my other machines wont detect a DAAP share. They do see them when I turn off firestarter. I'm even more confused when I see that I have a local connection using port 56690 when I turn off firestarter and monitor the log. It seems that DAAP is using 56690 but when I allow it for incoming/outgoing it still doesnt pick up my DAAP shares.
Is there a way I could fix this? I mean, I could run without a firewall but...idk if thats such a good idea :/
Ubuntu Networking :: Wlan Not Ready With Firestarter
Nov 8, 2010All I want to do is share my internet connection that comes through the eth0 cable to my wlan0 wiki card. Firestarter seems the convenient tool for doing this. BUT it keeps telling me wlan0 not ready. The card is connected correctly and network-manager does see incoming signals.
View 1 Replies View RelatedUbuntu Networking :: XRDP Being Blocked By Firestarter?
Dec 8, 2010I recently installed the XRDP server on my desktop edition of Ubuntu v10.04 following the simple instructions available here. I did this on two computers. One computer has Firestarter installed while the other does not.
When I use Windows to connect to the Ubuntu box without Firestarter, everything works just fine. However, when I try to connect to the one running Firestarter, I get a pop up showing an error message (see the attached file).
I checked the incoming rules in Firestarter and I don't see a way to add RDP sessions to the list of exceptions. I also tried adding my IP address in the host section but this too didn't help the situation.
Ubuntu Networking :: Internet Connection Sharing Via Firestarter?
Feb 5, 2010At my home I am using firestarter to connect my XBOX 360 to the internet and it works perfectly, never crashes etc and I get a moderate NAT which I've never experienced any problems in having.
I have my devices set up like this
eth0 - ifconfig eth0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255
XBOX - 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.255 gateway 192.168.2.1
This configuration works perfectly on my router at my house which has the IP of 192.168.0.1
However at my friends house he has a router with the IP adress of 192.168.2.10 or 192.168.2.7*, I don't remember exactly but I'll find out tonight. I have tried changing my IP settings on my xbox and eth0 to no avail. I noticed instantly that the XBOX IP is the same as my friends router. what the new settings would be, or simply changing the router's IP.
However there is also an issue with the DNS servers. I can't find them anywhere on the router or on the router box itself. I heard that I could point it towards my default gateway however.
Ubuntu Networking :: Multiple Port Forwarding Firestarter?
Apr 21, 2010I have a system running 9.10 configured with Firestarter acting as a router. We have multiple Xbox 360's on the network. Unless some ports are forwarded, the Xbox has a NAT type of "Moderate". I have been able to set an Xbox with a Static IP and forward the necessary ports for that IP, which allows the Xbox's NAT to become "Open." My question is, how do I do this for multiple Xboxs? If the follow the same procedure for additional Xboxes, only one Xbox at a time can have an "Open" NAT type, and the rest would be "Moderate". The ports the Xbox uses cannot be changed via the Xbox.
View 3 Replies View RelatedNetworking :: Firestarter Is Blocking So Many Connection Attempts\ Analyse?
Mar 2, 2010Since yesterday Firestarter has been prompting me that it is blocking external connection attempts as shown in the picture below:I'm not even going to bother covering the IP addresses because I personally don't see why I should care but as you can see, there has been loads of them attempting to connect to ports 3674 - 3675. I ran nmap 127.0.0.1 and it came back as 631 being the only one open. So then I thought maybe lsof -i would mention much more but all it shown was:
@boris:~$ cat meh
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
cupsd 1644 root 5u IPv6 14329 0t0 TCP localhost:ipp (LISTEN)
[code]...
Fedora Networking :: Firestarter Blocks Adhoc Wireless Printer
Aug 20, 2009I have the following machine :
laptop : Dell Inspiron E1505
Wireless : Intel Pro Wireless 3945 (ipw3945-1.2.2 + ipw3945d-1.7.22 + ipw3945-ucode-1.14.2 / eth1)
Printer : HP C4580 Photosmart wireless (hplip-3.9.8)
Ethernet : Broadcom Corporation BCM4401-B0100Base-TX (b44.ko / eth0)
External Modem : Siemens CL-110 ADSL
OS : Fedora 6+11 (currently on fc6)
The external modem is connected via the laptop ethernet and provides the internet connection.
The printer is connected via wireless adhoc to the laptop's IPW3945 wireless card. I use firestarter as firewall. When firestarter is disabled everything works fine. If enabled it blocks my printer. I have tried to open every possible port via firestarter (according to several other threads) with no luck. My printer is set (under system-config-printer) as :
Code:
hp:/net/Photosmart_C4500_series?ip=192.168.2.5
$ netstat -rn .....
OpenSUSE Network :: Firewall Logs Are In /var/log/{firewall,warn,messages} - Clutter?
Mar 25, 2011I suspect this is an initial configuration bug. All firewall logs seem to be going to all
three files. That causes a lot of clutter in the log files, and makes it difficult to see whether there are any serious problems being logged.
Software :: Build Firewall On Debian With 'Firewall Builder?
May 27, 2011I'm trying to build firewall on Debian with 'Firewall Builder'. But it won't let me compile and run unless one interface is set as management. There are two interfaces on my computer: 'eth0' and 'lo'
I don't want to be able to configure firewall remotely, so could I use 'lo' as 'management interface'?
Ubuntu Networking :: Can't Get Trough Firewall/VPN
Nov 21, 2010On the office we have a Firewall/VPN infrastructure. Everybody connects to internet trough an Access Point (Lynksys RWT120N), which, in turn, connects to a WatchWard/Firebox red box. I suppose this is the equipment that does the VPN stuff. Finally, the red box connects to a DSL modem from our ISP.The problem is: Everybody on the office can connect to the AP and surf the internet without any issues, excepting me when I connect with ubuntu 10.10. I have windows on the same machine and I can access the internet without problems.
What I have seen so far is that Network Manager associates with the AP, gets what I would consider all the expected information from DHCP, but internet connectivity is none.For "expected information from DHCP" i mean: IP address, gateway, and DNS.I can ping my assigned IP address, the gateway and even other machines in the same network. I cannot ping the DNS or other external IP addresses.
Security :: Use Iptables As Firewall Instead Of Juniper Firewall?
May 9, 2011Can we use iptables as firewall instead of Juniper firewall
View 2 Replies View RelatedUbuntu Networking :: Setup A Router With Firewall?
Feb 9, 2010I want to setup a router with firewall on ubuntu box that will connect windows pcs one serving as outside source and one serving as inside target.
View 2 Replies View RelatedUbuntu Networking :: Packets DROPPED By Firewall?
Mar 13, 2010I am using ubuntu 9.10. Configuring my firewall using guarddog. I have setup a rule to allow traffic OUT on port 7078 UDP, and just because i'm having problems i added an IN rule.
# Create the filter chains
# Create chain to filter traffic going from 'Internet' to 'Local'
ipchains -N f0to1
[code]....
Ubuntu Networking :: Setting Up And Old Machine As A Firewall?
Oct 12, 2010I have installed Ubuntu 10.04 Server on an older desktop with the intent of making it into a firewall box. What I would like to do is hook one nic into the modem, and the other nic into my router. I'm not sure if I want to setup the 2 nics as bridged.
View 1 Replies View RelatedUbuntu Networking :: Building A Firewall And Switch?
Apr 6, 2011I am wanting to build myself a Linux based firewall and network switch but I am not entirely sure where to start. I would like to point out that I am aware that it would be easier and quicker to just buy a switch and use that, but this is an intellectual exercise.
What I want to do is have a NIC which has the internet coming in. The traffic is then passed through the firewall program (I think IP tables is what I should be using?).
Now my main issue is that I will have quite a few Network Interfaces to manage. The machine could easily assign IPs by DHCP and act as the DNS server but what would I need to use to share the internet connection to all the NICs? There will be at least 4 interfaces, but possibly up to 12.
Ubuntu Networking :: Looking For A Good Firewall Application?
Apr 23, 2011im looking for a good firewall application.
View 2 Replies View RelatedNetworking :: Allow Only Sub Domain In Firewall?
Jun 13, 2011I have got a centos 5.5 box with 2 interface (WAN & LAN) and trying to configure firewall so that LAN user can browse [URL]...
View 6 Replies View Related
