Fedora Networking :: Can't Ping External IPs (no Firewall, Web Works)?
Jun 17, 2009
Since I installed FC11 I can't get vpnc to work (I always getno response from target").Also I can't ping any external IP even with the firewall disabled.What I see strange is that I had the same configuration in FC10 and the router configuration seems okay to me:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0
[code]...
View 3 Replies
ADVERTISEMENT
Aug 23, 2010
I am a bit new to fedora I have the following scenario in testbed of mobile ad hoc network
pc1 pc2 pc3 pc4
192.168.1.1 192.168.1.2 192.168.1.3 192.168.1.4
Now I have the source as pc1 and pc4 is destination and I want to send data/ping pc4 from pc1 via pc2 and pc3 using firewall firestarter,
View 1 Replies
View Related
Jun 3, 2011
I'm working on setting up access for our developer via Telnet, we are on a local network behind a physical firewall. I set up the standard Telnet service for Fedora15 and from localhost I can login via any user and root.... However I cannot login from another terminal on the LAN, even though I can ping and FTP to the fedora15 box. I added the firewall rules for telnet, that did not work, so I disabled the firewall, still cannot get a connection via port 25. I feel either port 25 is closed in another manor or the telnet is restricted to the localhost.
Also I cannot login to root to configure the Firewall Desktop GUI, only standard users, is this an issue? I also cannot login to the console as root even though I use the correct password.I can only su to root and sometimes it is a PITA. There must be some settings to clear these issues up...
View 2 Replies
View Related
Aug 17, 2010
I can ping a host on my LAN successfully, but I cannot ping [URL]... for example. I have disabled the firewall and set http_proxy and can browse the internet with "Use system proxy settings" checked in Firefox. I am unable to update with yum either, but I am not sure if this is a side effect or not. I have run a trace on my ip address as I am browsing the internet and I can see the sites I am visiting on our web appliance. However, if I try to ping or update no requests are hitting the proxy so I don't think that is the issue.
View 6 Replies
View Related
Jun 8, 2011
I'm running Telnet Server, VFTP, and VNC on a Fedora 14 box. The box's internal IP is 192.168.1.222 This machine is configured to live in the DMZ, The firewall is up on both the router and this box. I can remote in from home using our external IP. I can FTP. I can Telnet. All using our external IP. When i'm in the office, i can remote in using our external IP. I can FTP. I can Telnet. Again, all with the external IP. If i attempt to telnet 192.168.1.222 i get a connection refused. i can ping the 192.168 address
nmap tells me that all 1000 ports on 192.168.1.222 are closed
nmap tells me that my expected ports are open on the external IP.
.... This is a relatively new conundrum as it "used to work", and only appears not to since our last reboot (power outage). I know i have to be missing something simple here, but i differ to the experts.
View 5 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
Feb 6, 2010
My problem is the following:I can only connect to the internet and download through the FTP, but not through HTTP.I am in a hospital at this moment and have a netbook (Lemote Yeelong). Also there is a computer here with internet access.I would like to access the internet by using the cable from the computer.I configured my netbook just like the local computer (same host name, same MAC address, DHCP), just to be sure.I can ping google.com and I also can download from ftp.debian.org though ftp.However, when I try to connect to google.com through epiphany, it just loads and loads without success
View 4 Replies
View Related
May 20, 2011
When I ping a destination IP address, it responds. However, when I try to telnet or ftp or sftp to the same IP address, it does not connect.
I do not know the physical location of the machine.
View 11 Replies
View Related
Aug 2, 2010
I'm trying to install Mandriva Spring 2010 for a friend on his laptop after MS Windows crashed. The installation appeared to work, but I've got an odd networking problem - firefox is unable to load URLs. Every URL I try returns a server not found error.
When I drop into bash I'm able to do the following
Code:
ping 66.102.9.103
ping google.com
However when I try
Code:
wget http://google.com
I just get a message that tells me that wget is "unable to resolve host address google.com'". This is odd - ping is able to resolve google.com, but wget isn't. I assume that firefox and Konqueror both have the same problem. Could it be cause I've specified the http protocol?
View 11 Replies
View Related
Dec 3, 2010
My Windows machine can ping Ubuntu by name, but Ubuntu can only ping the Windows machine by using it's IP address. This was working fine in both directions until I purged Samba. After purging Samba, I couldn't ping in either direction unless I used the IP address. I did some reading and found that Samba provides NetBIOS functionality that allows the machines to resolve host names without a DNS. Since I'm not running a local DNS, I decided to reinstall Samba. Unfortunately, I've not been able to restore it to full working condition. I don't want to use hosts files as all the IP addresses are assigned automatically by DHCP. I want to be able to access the Windows machine by name.
View 9 Replies
View Related
Sep 18, 2010
I am trying to turn an old desktop that has slackware 12.2 installed on it into a dhcp server that performs nat on a certain range of the subnet... the server's hostname is nutshell. Once I have it set up, I am testing it with a slackware64-13.1 laptop whose hostname is firebolt. Nutshell has a static ip. Before messing with the DHCP side of things, I thought I would start with getting NAT working. The steps I have taken are as follows:
I modified the /etc/rc.d/rc.inet1.conf script so that the interfaces would be setup on boot. Eth0 has ISP's static ip assigned to it, and I assigned 172.0.0.1 to eth1. I opened the box as wide as possible, so that former firewalls and security settings would not interfere. The contents of /etc/hosts.allow is All:All, and /etc/hosts.deny is an empty file. The firewall is set to allow everything, i.e., iptables -L has "ACCEPT" as default policy on all chains. Next I used iptables to start nat with the command:
[code]...
I can ping external ips from firebolt, so the NAT appears to be working properly. I fire up x-windows and surf a little. While I am surfing it freezes. Checking the pings again, suddenly firebolt cannot ping isp's dns anymore. Checking on nutshell, it can no longer ping external ips either. However, after running /etc/rc.d/rc.inet1 restart on nutshell, all is well, and it is pinging out again. I go back to firebolt and resume my surfing.
View 4 Replies
View Related
Sep 3, 2010
I can't ping by netbios name or fully qualified domain name, BUT nmblookup works just fine. I know it's a dns problem(s) I just don't know what or how to fix it. I'm very new to all of this(networking, domain administration, posting on forums etc) so I hope this is the right way to ask for help here. I've searched around the forums and the internet for a bit but I haven't found a solution to my problem yet.
here is some background on how the network is setup2 different domains sharing the same dhcp scope.
DC for DomainA is running windows 2003 std
DC for DomainB is running windows 2008 sbs
DC-A has ip of 192.168.1.249
DC-B has ip of 192.168.1.3
router is sonicwall (192.168.1.1)
DC-A is hosting both DHCP and DNS
there are 25 computers in DomainB and 1 computer (not in domain) with ubuntu 10.04 and Free Open Ghost running on it (dhcp off) all 25 computers can ping the fog server by name (and eachother) all 25 computers pxeboot to fog just fine
[Code]...
View 1 Replies
View Related
Dec 4, 2010
I've encountered a problem after doing a fresh install with xubuntu 10.10 (2.6.35-23-generic).some sites are blocked like [url]....if I do dig [url]....- I receive the A, CNAME records and the IP address and everything.when ping[url].... - I receive 'unknown host'.when ping <theipaddress> - I receive responses
View 2 Replies
View Related
Feb 3, 2010
i have a hp 6500 e709a printer. have configured for network printing and would like to use the scan facility.i have tried to scan from the printer but it does not find the computer. the hp documents mention advanced firewall information on incoming udp ports and tcp ports etci believe it is with my machine as my son has a windows box with the hp software and i have managed to scan from that machine.
View 4 Replies
View Related
Feb 5, 2010
I posted this already in the absolute beginner section, but no answer was found, so I thought I might try this place..Long story as short as possible:
- I installed Ubuntu 9.10 for a friend who was fed up with WinXP crashing all the time
- After the install, networks was broken. I could ping sites outside the LAN, could connect to the router via firefox, but NO application could access the web. - The router works just fine, I tried with my own notebook.
- Disabling ipv6 in grub (edit /etc/default/grub and 'sudo update-grub') seemed to solve the problem.
- Then update the standard packages + install restricted extras and boom, Network gone: No ping to sites outside the LAN, no nothing. Still can connect fine to the router and even the remote desktop connection works, connecting over the internet. But that's it.
I have tried setting the mpu to a value recommended by my isp, I have set static ip and dns, I really don't now what to try any more.
View 6 Replies
View Related
Jun 15, 2010
I had configured Squid in RHEL 5 and facing an issue with pinging. Not able to ping any website,hostname is resolving to ip address but not able to ping
[code]...
View 8 Replies
View Related
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
May 27, 2010
This is a RHEL 5.4 install. I did a fairly routine install setting up a static IP address of 10.5.96.10, a subnet mask of 255.255.254.0, and a gateway of 10.5.96.1 with the standard DNS setup for this network. These are all standard network setting for this network and otherwise work fine on other systems. The IP, gateway, and subnetmask all appear correctly on all relevant configuration files. This server can not ping any other system on the network and can not ping its default gateway. No other systems can ping this one either. Also this system can not ping "localhost" or its own hostname. The hosts file contains the line:
[code]...
I can ping 127.0.0.1 and 10.5.96.10 and it works fine. Also the firewall is disabled. I know I probably can't get a straight forward fix with the information I have on hand right now, I'm more of a Debian guy, so there might be some Red Hat intricacies I'm not familiar with. I think I had a CentOS install some months back that had this issue and I don't remember how I fixed it, or if I even did. I might have just replaced it with Debian. That's unfortunately not an option this time around since it's not my box.
View 4 Replies
View Related
Sep 29, 2010
I need to set up my centOS computer as a firewall in my home network. Ive got 2 interfaces, eth0 and eth1. I want to allow and forward all traffic on eth0 and block all traffic on eth1 except ssh, ping(icmp) and DNS. How do I do this? Ive tried some editing in /etc/sysconfig/iptables but no luck.
View 1 Replies
View Related
Oct 15, 2009
As the title suggest, I have downlaoded the latest copy of Ubuntu Server from the ubuntu website.Everything installed fine. DHCP configured ok as far as I can tell. I can ping other machines on my network (which are running Windows) and they can ping the Ubuntu machine and conenct to Apache which is running on it.If I try to ping google.com or any other domain, it gives the correct IP address but gives no response to any pings, dont telnet on port 80 (or any toher potr for that matter) on any machine on the internet. I checked the settings using ifconfig to see what DHCP had assigned, and they matched the windows machines configuration (other than the IP address obvisouly). I tried assigning a static IP, even reserving a particular IP for my NIC.
Whatever I do, i cant connect to any machine outside the network via IP or domain.I have searched everywhere and tried everything i can find on the net but still to no avail.The Windows machines are part of a domain called alcom-uk.local and run off of a Windows Small Business 2003 Server. Not sure if i need to manually setup Ubuntu to connect using a domain or anything.
View 14 Replies
View Related
Mar 18, 2010
I have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies
View Related
May 21, 2009
I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
View 8 Replies
View Related
May 27, 2010
I did a shields up test and it told me that 1056 ports were stealth but that my pc responded to ping and was visible on the net. How do i fix this?
View 4 Replies
View Related
Feb 2, 2010
using redhat on server machine and open suse on client machine.i have installed nfs server and and it is running properly but when i want to mount shares from my client machine it gives the following.
error. "mount.nfs: mount to NFS server '10.3.31.146:/share' failed: System Error: No route to host" both systems ping each other and firewall is also disabled. another problem is when i remotely access from my server machine to client machine it gives the following error ssh:connect to host 10.3.31.147 port 22:connection refused what can be the problem?
View 2 Replies
View Related
Jan 19, 2010
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
View 2 Replies
View Related
May 18, 2010
I am learning to setup firewall in my home for that i have selected four system(sys1,sys2....sys4) for testing .I have configured sys2 to act as a firewall with two NIC. sys3 and sys4 are inside the firewall . sys1 is not connected to firewall for testing purpose.
the IP assignments are follows :
sys1 : ( fedora, not connected to firewall i am thinking, But i am not sure )
IP : 192.168.2.1 ,
gateway : blank
dns1 : blank
dns2 : blank
sys2 firewall ,IPTABLES )
code....
what happened is that sys1(not connected to firewall) can ssh to sys4(connected,inside firewall),since the rules are written not to ssh form sys1 to sys4..
then I came to know whatever the request I give, It directly goes as sys1 --> sys4. Not as sys1-----> sys2(firewall)---> sys4 .and the firewall is not filtering and processing anything for both inbound and outbound (i think it's my mistake some where). the requests are directly going inside without firewall.
View 3 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Jul 24, 2010
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
View 7 Replies
View Related
Feb 1, 2011
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
View 10 Replies
View Related
Apr 29, 2010
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies
View Related
