I am the new user to ns-2. I would like to know is it possible to send the keys or some value as the packet data (content of the packet) in ns-2 (for wireless environment).
View 1 RepliesMy linux machine is connected to the outside internet, and I have a minecraft server running on an internal machine (192.168.1.201). Right now, I am forwarding port 80 on the linux machine to 192.168.1.30, which is working.
iptables -t nat -I PREROUTING -i eth0 -d 192.168.1.30 -j DNAT --to-destination 192.168.1.201
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED,RELATED -j DNAT --to 192.168.1.201
______________________________
I want to filter out the GET/POST requests and forward them to port 8080. I can't seem to get that working.
I've tried this:
iptables -A INPUT -d 192.168.1.30 -p tcp --dport 80 -m string --algo bm --string 'GET' -j REDIRECT --to-ports 8080
How can i send udp packet to the DNS using netcat in opensuse.
View 7 Replies View RelatedI need to know how a data packet is transmitted from the sender to the receiver passing through the five Internet layers. Specially what device (hardware) the data packets have to pass through at each layer before reaching the destination in a LAN.
View 2 Replies View RelatedI got a problem with my CentOS server. Somebody told me OpenVPN Requires different changes inside my firewall settings. That could be the problem why openvpn wont load..I receive this error on my CentOS panel when im trying to connect into the centos openvpn (with my winxp pc):
Thu Sep 17 20:31:36 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
Thu Sep 17 20:31:38 2009 Authenticate/Decrypt packet error: packet HMAC authentication failed
Thu Sep 17 20:31:38 2009 TLS Error: incoming packet authentication failed from 84.xx.62.122:2622
[code]....
Does ubuntu have anything similar to window's program Cain & Abel for wireless packet capture?
View 1 Replies View RelatedJust want to know if my connection will be good for voip like skype...
View 1 Replies View RelatedI have ubuntu lucid running on Dell 230 PC, linksys WPN600 N wireless PCI network card connecting to a Cisco E3000 dual channel router.
Kernel: 2.6.32-33-generic
Installed Ralink driver v2.4.0.0
iwconfig shows that the bit rate is 130Mb/s and link quality is 98/100. I'm using the wcid network manager instead of defaul gnome one. I'm getting lots of packet loss and performance is very bad. The connection is practically unusable. I've tried installing the compat wireless backport package but that did not work at all.
I am running Slackware 13.0 on a old dell dimension 4500. The install went fine. sound worked, graphics where good. Everything was going perfect. until i worked on wireless.i have a realtek rtl8185 wireless chipset card. I got the wireless. Linux wireless driver. It worked on both Mint 5.0 and backtrack 4.0.so I untar the file. cd to the dir and type make then make install and reboot. like I have always done.
I was having to fight with wpa_gui and finally got it working but then it would go in and out on the connect and disconnect feature. so I tried using iwconfig. did not get muc luck with that either so i installed wicd and finally got a ip address after fighting with it would give me in a ping like 75% packet loss. so I read a lot of post and try to find stuff before I post. and while reading I learned that you guys normally ask for info on the hardware and software so here you go. but I will say first that I read about adjusting the mtu to fix packet loss, I showed some of the changes I made in it around the pings I know it is a mess I am sorry I tried to make it readable. if you need more information let me know. I cant get online using a web browser or if I can only for one or two pages. any help would be great. thank you.
Code:
bash-3.1# ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
[Code]...
As i am posting in this forum you might already have guessed that I am a total linux noob, but I am a pretty faster learner. I know a few basic things but I feel like I am stuck with my problem.I want to send the Magic packet (wake on LAN) from my linux machine to another, but I am unsure how to approach this. I have google�ed my ass off but I am none the wiser. I found a few forums posts and programs that can do the trick and guides in how to use the programs but I have no idea how to install them.You have to know that my linux machine is a NAS server and has therefore only Konsole access (no GUI). As I said before I am pretty much a noob
View 16 Replies View RelatedCan someone help me with this problem,trying to send a packet,using tcp/ip,the packet should look like this:
Code:
field 1: SOCKS protocol version, 1 byte (0x05 for this version)
field 2: status, 1 byte:
0x00 = request granted
0x01 = general failure
0x02 = connection not allowed by ruleset
0x03 = network unreachable
0x04 = host unreachable
0x05 = connection refused by destination host
0x06 = TTL expired
0x07 = command not supported / protocol error
0x08 = address type not supported
field 3: reserved, must be 0x00
field 4: address type, 1 byte:
0x01 = IPv4 address
0x03 = Domain name
0x04 = IPv6 address
field 5: destination address of
4 bytes for IPv4 address
1 byte of name length followed by the name for Domain name
16 bytes for IPv6 address
field 6: network byte order port number, 2 bytes
and this is my code:
Code:
int domainLen = strlen(domain);
char reply[domainLen + 7];
reply[0] = 5; // version
reply[1] = 0; // succed
reply[2] = 0; // reserved
reply[3] = 3; // its a domain
reply[4] = domainLen;; // lenght of domain
for(int j = 0; j < domainLen; ++j)
{
reply[j + 5] = domain[j];
}
reply[5 + domainLen] = 80; // port
reply[20] = '�';
Send(reply, sizeof(reply));
domain is "www.google.com". Am I doing it right ? I dont know much about bits.
I'm writing to you because I encountered the following problem. My program displayes all network interfaces that are available in the system, but I would like to adda functionality in which a user can enter a destination address IP (ex. the IP address of the Google search engine) and will get information which network interface will be used to send it. As I know it is associated with reading information from routing table in the system. Maybe you know the API (functions/methods) which I could use to do it in RedHat ? I program in C/C++, but if you know how to do it in other programming languages (Java, Perl, Python) I will be grateful for any information.
View 4 Replies View RelatedI am trying to generate a UDP syslog packet from my C application. But I am facing a problem with a Cisco Router ACE that does not like the Source Port being '0' and thus drops the packet.How can I specify the Source Port in the UDP header to '514' as stated in RFC3164 (Section 2: Transport Layer Protocol)? "It is RECOMMENDED that the source port also be 514 to indicate that the message is from the syslog process of the sender"
View 1 Replies View RelatedI am facing problem(system gets crash) while I try to send IPv6 packet by using my kernel module. I have given the code and makefile for my module. I will appreciate if any one shares any tester module for sending IPv6 packets.The kernel version that I am using is 2.6.9 and it supports for IPv6.
file name: rtp_pkt_tx.c
#include "linux/kernel.h"
#include "linux/module.h"
#include "linux/skbuff.h"
#include "linux/init.h"
[Code]...
I have found many examples out on the www for creating udp servers with sockets. The problem I am running into is after I receive the packet from a host I need to be able to send a custom made packet(I'm using RawIP / NetPacket to make my packet) back to this host. The only way to do this is seemingly through the send() function. This function however doesn't appear to allow me to specify which host to send my packet to.
View 2 Replies View RelatedCurrently i am working with linux code. I need help in printing data in ip packet. In my program i am defined the headers and defined ip packets. But I am having problems with printing data in the ip. I am thinking that for loop has to be used, but what parameters to use
View 2 Replies View RelatedOn Linux, is root privilege required to send a wake-on-lan magic packet? If it depends on how you send the magic packet, please let me know under what situation root is required.
View 1 Replies View RelatedI am recently trying to get a steady wireless connection running. I am currently using the default settings/driver Fedora 13 is stocked with. As my internet browsing is somewhat up and down in load times, I decided to check in a video game which is generally a good test for me. haha I am harshly spiking and cannot find the source of my problem so my guess is a driver issue.
lspci | grep Network:
Code:
Code:
It is is seemingly right, my Windows 7 harddrive works just fine, this is just one last of the few issues I'm having from fully formatting my winblows HD to use as Linux storage.
I cannot find any native AR5008 Linux Drivers for my card and it has been a frustrating day. I guess I'm not cut to be a network analyst just yet.
System specs:
ASUS P5Q SE/R
Intel Core 2 Quad Q9550
4GB DDR2 667
Gigabyte GTX465 1G
TP LINK TL-WN851N Wireless card
I am trying to get an arp packet from my wireless wifi router (access point), to which I am not connected. I simply tried ping 192.168.0.1, but the answer was connect: network is unreachable. What can I do about that?
View 1 Replies View RelatedI have the latest version of aircrack, and the latest compat-wireless package installed. When I try to inject I get this:
linux08:/usr/local/sbin # ./aireplay-ng -9 wlan0
16:46:33 Trying broadcast probe requests...
16:46:35 No Answer...
16:46:35 Found 0 APs
I know for a fact that there are 2 AP's. This worked perfectly with my old laptop with a D-link PCMCIA card.
[Code]...
I am in a hub(with switches and rooters) and i want to spy what packets everyone receives! if can i do this and if i can which tools i can use?
View 6 Replies View RelatedI am trying to simply address translate TCP packets from one destination IP to another destination IP (DNAT?) without getting the initial SYN packet. Is this possible? I do not think it is with DNAT since the conntrack needs SYN first.
I have given the command:
The problem is that the first packet that matches this rule will be the SYN-ACK and I suspect it is simply DROPPED.
I am sparing you the gory details of why I would do such a silly thing, but simply put; I need to intercept client-to-server packets through a tunnel, but allow server-to-client packets to follow through the regular network.
I have been working on this for many days w/o success and my learning curve is still steep. I can provide more details as needed.
My question is about the raw MX reply package structure. I've read the RFC and all relevant pages I could find, but I couldn't figure this one out. Say we do a google.com MX query.
The first answer (just the rdata part) will be: google.com.s9b2.psmtb.com But in the raw package, instead of the .com, you have c0 13. Then for the second answer, google.com.s9b1.psmtb.com, the raw package has, instead of psmtb.com, just c0 3a. So is the part after c0 a pointer towards another part of the message? Or what does it stand for exactly? I am puzzled by it, and don't know exactly where to ask... some of the networking people here might have a good idea.
From all the stuff that can enter an interface, how does it know when an IP packet has been *formed*? What if it's just random garbage entering there for whatever reason? Also, can Linux do other protocols besides TCP/IP? This would be the problem, as I said above.
View 2 Replies View RelatedIn application udp port listening with 3330 i am sending udp request from port 0.0.0.0:3330 to 0.0.0.0:3330 that is same port in the same machine....application works fine udp sending and receiving also fine.....for clarification ....is there any conflicts in the communication ?
View 2 Replies View RelatedI am just starting my adventure into Ubuntu. After installing and configuring Shrew Soft in Ubuntu 10.04 64Bit, I am having some serious packet loss issues. The LAN is wireless, however the only packet loss I experience is over the tunnels. I have tried different algorithms, and it seems as I fiddle with the MTU client side, it clears a bit, but the best I have managed is 23% loss average.
View 2 Replies View RelatedI wrote a program for transmitting an UDP Packet. It is properly received in Fedora core 2 machine while its not received properly in Fedora 12. I tried using Wireshack packet capture software which shows the protocol as DIS. Is there any service or setting i need to do for identifying the packet as UDP.
View 2 Replies View Relatedhow to identify the icmp packets & marking. this below icmp packets marking is not working.
iptables -t mangle -A PREROUTING -p icmp -j MARK --set-mark 0x5
iptables -t mangle -A PREROUTING -p icmp -j RETURN
with the help of port no or any other how can i identify the icmp packet ?... This below two is working fine
iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 0x2
iptables -t mangle -A PREROUTING -p tcp -j RETURN
iptables -t mangle -A PREROUTING -p udp -j MARK --set-mark 0x3
iptables -t mangle -A PREROUTING -p udp -j RETURN
I am simulating a TCP/FTP to TCP/FTP network and trying to monitor the packet loss.
I am able to monitor and graph data regarding the TCPSinks' bytes received, but I can't monitor packet loss.
Why is it that the TCPSink Agent has a variable for bytes (bytes_) but not one for monitoring packet loss?
Do I have to monitor the packet loss from the queue? If so, how do I write code for this?
Below is part of the code for monitoring bytes received from sinks if anyone was interested.
I have 2 Ubuntu boxes sitting in the same subnet; server 1 [130.15.6.68] and server 2 [130.15.6.69] What I am trying to achieve here is the following: server 1 act as a gateway or proxy to server 2, meaning that server 1 is exposed to the Internet and all traffic to server 2 should go though it (i hope!).
server 2 act as application server and I don't want a direct access to it from the internet. I want all the inbound traffic comes through server 1. for testing purposes, i will limit the traffic to simple http or port 80
in server 1, i have done the following settings: iptables -t nat -A PREROUTING -p tcp -i eth0 -d 130.15.6.68 --dport 80 -j DNAT --to 130.15.6.69:80 iptables -A FORWARD -p tcp -i eth0 -d 130.15.6.69 --dport 80 -j ACCEPT In server 1, I've edited the value of net.ipv4.ip_forward to equal 1 (uncomment that line in /etc/sysctl.conf) Currently, both server 1 and server 2 has its own apache2 servers with different index.html files. the problem is, when i browse to server 1, I am still seeing its index page rather than being forwarded to the index page of server 2. how can i achieve the traffic forwarding from server 1 to server 2 when my browser pointing to server 1?