I have a MTS MBlaze USB dongle, with which I can connect to the internet. The question is, how do I set up a ssh connection accessible over the internet so that any one can connect to my PC through that (using valid username/password provided by me of course) ? If not possible, what do I need to make this possible ?
View 3 RepliesI have installed the 3 packages required for MTS Mblaze 3G Modem to get connected to the internet.
Quote:
1. usb_modeswitch
2. usb_modeswitch-data
3. wvdial
Here is the "/etc/wvdial.conf" file that gets generated when I do the "wvdialconf"
Code:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Stupid Mode = yes
[code]...
But now when I open Mozilla or Google Chrome Internet Browsers, I am not able to connect. Moreover, I also tried to ping to [URL] but it is not pinging.Is it related to some Network Manager settings. As when I look at the Network Connection Icon, it shows CROSS i.e. not connected to any network...
Earlier today I decided I wanted to switch back over to ubuntu, my internet was working fine, but as soon as i reformatted to Linux my modem stopped showing any lights under ADSL - TX and RX. and I can't connect to my wireless connection anymore. What should I doooooooo
View 1 Replies View Relatednewly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies View RelatedI recently installed linux Fedora 14.... how do i have internet connection via my mobile modem...? i conect via usb
View 2 Replies View Relatedi'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have installed Fedora 14 on my laptop And trying to use MTS MBlaze Mobile BroadBand Connection And its a USB MODEM in order to use usb modem I am using use 3 packages ie
1. usb_modeswitch
2. usb_modeswitch_data
3. wvdial
Its connecting when i Dial using wvdial as below
root@Athreyasa Athreyasa]# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
[code]....
After connecting i am getting ip as 180.215.44.134 gateway as 10.212.64.1 but if i try to browse the Internet using firefox it says no server found error.I tried to ping [URL] and its not pinging after connecting. nslookup also fails against [URL]however if i ping any of the ip that i am getting while connecting it is pinging Also disabled the firewall and selinux is set to disable just in case to check something else is blocking but no luck
I need access to Internet through modem connection.
I have 2 questions :
1.Can I do it by using normal telephone line ?
What are the credentials to authenticate (mean : user nad passwd) ?
2. How to configure modem connection in my ubuntu linux ?
I am using Fedora 13. and had bought MTS Mblaze Mobile Broadband device. One installer comes with this device for Fedora, I have installed it.There were some issues while starting this application on fedora. But after seeing some threads for SELinux, it had been solved.Now, when I run this software, a window appears. If i clicked connect, it does show connecting and once connected automatically firefox opens.
But i am not able to access internet. After some time software shows device is in sleep mode due to inactivity. Network connectivity icon on launch panel on fedora shows network is connected.I had similar problem with Mandriva 10..
I recently installed Open SUSE 11.2. It's a pretty cool OS. Anyway,sadly enough, I cannot access my internet connection via my USB internet modem. Worst of all, Open SUSE cannot detect the USB modem device. I am currently new to Linux and I may be overlooking something. I also clearly figured that Linux online is better than Linux offline from what I read from blogs and numerous posts. So in essence, I cannot fully appreciate the true power of Open SUSE 11.2 offline. Would there be a way to install my USB modem device?
View 1 Replies View RelatedTrying to move from Windows to OpenSUSE. I have installed OpenSUSE 11.2, and am having a hard time trying to connect to the internet using my nokia E65. I have tried to configure the modem thru YaST and it keeps showing that my nokia E65 modem is not configured, but adds another modem every time I configure using the edit button i.e. modem0, modem1 etc.
When i finish the configuration I get pop ups on the bottom right conner:
Notification from network management
WLAN interface attached
Network interface attached
But nothing happens afterwards. When I connect the phone it shows that it is recognized as a modem (probably). but when I click on the icon so it connects to my service provider "econet" it just says activating with a red x in the conner, and still nothing happens!
The following are the screenshots (still not sure how to attach files on this forum), may someone assist, with that too.
I really want to move from Windows but this is what's stopping me. the sooner I connect to the Internet through my phone, the sooner I leave Windows, since it's the only way I can connect to the internet.
I have tried wvdial, and I got the following:
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedAre there detailed instructions for Suse 11.2, anywhere, on installing a hardware dial-up modem and configuring it to get an Internet connection?
View 2 Replies View RelatedI have an adsl modem acting as a bridge to my router my setup was working well for more than year now , but then the internet went slow . I set the modem back to PPPoE the problem was with the DNS server of the ISP so using ifup i set the dns t 8.8.8.8 (google) the connection is back , but when i set the modem back as a bridge slow internet does the router know that my dns is 8.8.8.8 or i should set the dns on the router ? I can't see an option to set the dns on the router ( i just enter my username and password from the isp to use PPPoE mode ) by the way i called the isp support they kept telling me to restart , i told them i did but i never restarted my pc . I'm sure if i tell them i'm running linux they will blame the os !
View 2 Replies View RelatedConnection is possible only after few reboot. Preferences I tried all.
View 9 Replies View RelatedI have a usb modem which I plug into my ubuntu 10.10 system for a dial-up service. The modem is recognised by wvdial and dials properly, but the connection is not established.I get "Unable to run /usr/sbin/pppd" (although pppd is certainly in /usr/sbin), followed by "Check permissions of specify a 'PPPD Path' option in wvdial.conf", and finally "Connected, but carrier lost", then it gives up.
View 5 Replies View Relatedthe bsnl modem cannot access the ubuntu 9.10
View 2 Replies View RelatedI have a usb modem : huawei e220.I am using ubuntu 9.10. I can't access the internet using it. I made a connection form the mobile broadband tab but every time it disconnects .Ubuntu identifies the modem but every time i try to make a connection it fails.
View 5 Replies View Relatedhow to connect my modem to the Internet, the help file on my Ubuntu 9.10 does not match the features available. I am using a modem from Starcomms (a local CDMA services provider in Nigeria) made by Epi Valley.
View 4 Replies View Relatedi wanna to connect to internet with USB DSL modem .
View 1 Replies View RelatedI am new in Ubuntu Linux. I am using Acer Aspire 4740. And I have purchased HSDPA Mobidata as internet modem. But I cannot connect it. How can I connect it and use internet using this modem?
View 2 Replies View RelatedIts a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
Generally I don't like just asking stuff but just can't crack this one. I got a debian machine. My internet connection is on a 3g usb modem. It connects perfectly. Then I downloaded DHCP 3 and then configured it so I got 172.16.0.0 network address with gateway on 172.16.0.1 (set by DHCP) 172.16.0.1 is also the eth0 address and is assigned as fixed by DHCP. With the modem not connected the other PC connects no prob, gets the default gateway and get assigned an ip by DHCP and there is a proper connection with APACHE serving pages. So it is all grand. Where my prob comes in is that I am not able to get traffic from the modem through to the other PC, and at times the modem would not be used as default connection with eth0 up. Restarting the modem fix this but then also drop the assigned gateway address.They are connected directly via crossover cable. The modem is setup as ppp0 according to ifconfig and then ethernet as eth0 and I tried some masquerading allowing all traffic through but does not seem to do the trick.
View 1 Replies View RelatedRecently i got bb internet connection, how to configure my linux pc to internet using DSL modem i.e in bridge mode.
View 4 Replies View RelatedMy router malfunctioned after a weird lightning strikes scenario so i tried connecting directly to the modem, i cant connect on my ubuntu desktop so itried connecting using my laptop with windows 7 and gets connected
View 1 Replies View RelatedI currently using Ubuntu 10.04 LTS
View 2 Replies View RelatedHow do I get my Bigpond internet (ZTE MF636 BP) USB modem to work with Ubuntu 10.4 LTS ?
View 1 Replies View Relatedi have E220 usb modem which i managed to crack and make it work on the Airtel network here in india.The problem is i cant seem to make it work in ubuntu, the way it connects is as below :
i boot in windows and connect to internet Then reboot in ubuntu and then it works fine.and i have to do this everytime. appears like the device gets initiated by booting in windows.
last 6 months i was trying to connect internet on Ubuntu 10.04 yet i don't know how to connect internet i used mobile samsung s3310 with aircel
in windows its required hardware supporting software ,i dont know whether it's required for Ubuntu.
i followed instruction on ubuntu forum that is in
network manger->new connection->mobile broadband connection-> modem type (in that box is not enabled so i cant select my device)
->provider country(india) ->choose provider(Aircel)->billing plan(aircel prepaid ->APN is aircelgprs and dialup number is *99***1#)
->finally i did everything and applied but the network manger not showing any mobile broadband connection i am tired
I have a sprint usb 3g modem that plugs in via usb. I want to be able to share that Internet though an Ethernet port so I can connect another PC or my playstation so I can steam movies or just use the INTERNET on another puter. Iv tried lots of stuff I found on Internet like firestarter for one but it doesn't want to set up right.
View 4 Replies View Related