I installed Fedora 13 just a few days ago, and it was all working well, until i tried to boot into my windows system. The windows boot loader said that it couldn't load a system file, and suggested i repair the windows system. it did not work, and i dont want to completely reinstall windows because i have some very important VB6 source code, that i do not want to lose. (For all you VB haters, i only use it bcus its really easy to learn. Don't bring the subject up, because i dont want this thread deleted because some jerk decides to start a flame war about it.) I worked really hard on the project, and i dont want to delete it. Fedora still works fine, but come up with this error message when i attempt to mount the NTFS filesystem:
[root@DaGeek247 ~]# mount /dev/sda1
Failed to read last sector (160071596): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
I am new to Linux platform and have installed RHEL 6 on my computer. I have gone through different posts on websites regarding how to mount windows drive on to the Linux file system.Here are few results of my trial where results are slightly overwhelming for a guy like me:
1. Mounting NTFS file system using mount commandAs a su-) " $mount -t ntfs /dev/sda1 /media/MyFilesystem"
Output: error: unrecognised file system ntfs
2. I followed step by step instructions of installing Fuse and ntfs-3g_ntfsprogs but had no luck:
while using this command for the installation of for FUSE-0.9(which I guess prepares files for installation) I am getting this error : " Command use: ./configure --exec-prefix=/; make;make install"
Error: "Checking Kernel source directory.../usr.src/kernels/2.6.32-71.e16.x86_64...Checking Kernel source version.......Not found " Configure error: cannot determine the version of the Linux kernel source.Please configure the kernel before running this script.
Woooh , as u can see my Linux version is mentioned in that message so can anyone lemme know whether this issue is because of the incompatibility of Fuse with my version of Linux or am I suppose to make some changes in the command itself.
I had a Linux server with Wheezy, I have 2 internal drive, one for linux OS, the other our Video On Demand drive that must be accessible to Windows and online. (That's why I chose NTFS, with our large video files, FAT will not work, and EXT isn't compatible with windows sharing, and I haven't gotten FTP to work right .
So I upgraded to Jessie today, and everything went smoothly until I tried to access my NTFS drive. (Named WowzaStorage)
I used FSTAB to auto-mount the drive (/dev/sdb1) to /media/ntfs/ on boot. All of this worked swimmingly on Wheezy, but since the update, something got mucked up and I cannot figure it out.
When accessing the mounted NTFS folder in /media/ (if it even shows up) gives me a 'Cannot be found' 'Input/Output error'
When in gParted to examine the drive, I can select it and view all the correct info, but I keep getting "error informing the kernel about modifications to partition /dev/sdb1/ --invalid argument"
Now first I thought maybe the NTFS driver was faulty and I removed 'ntfs-3g' and reinstalled it.
Now when I am in Terminal, after i umount and mount sdb1, I can CD to the drive but not the folders on it... Also using the File Browser, I get errors, and missing folders.
I get "Unhandled error message: Error when getting information for file '/media/ntfs': Input/output error"
I do really like Ubuntu. Still working on getting my way around and finding things but overall I think its great!But I have a problem. I used my friends removable drive to watch a movie on my laptop, and when he put it back in his it doesn't work.He uses Windows 7. He has alot of stuff on his drive that we would rather not reformat, so Im here asking you fantastic people for help.So he had it formatted to NTFS and now its RAW..I have no idea how. It won't work on either my desktop (XP) or his laptop (7) but it works fine on my UBUNTU
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage *Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
so I just installed Ubuntu 10.10 a couple of days ago and used my whole hard drive.Thing is, I decided that although I loved Ubuntu, I stll want to have dual-boot for some cases.. But now that the disks filesystem is not NTFS, Windows cannot regognise the disk as installable and cannot convert the filesystem. Gosh, Windows is a piece of junk, but I still need them for some occasions.
I have an one terabyte HDD as NTFS File system, my life on it .. now not shown
Code: alz3abi@Hz:~$ lsusb Bus 002 Device 004: ID 1d57:000d Bus 002 Device 003: ID 1058:1100 Western Digital Technologies, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 04f2:b1d6 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I would like to format a pen drive to NTFS, so that a windows machine can use it, but Im unsure of the filesystem option's in Cfdisk. These are the options:
07 HPFS/NTFS 86 NTFS volume set 87 NTFS volume set
I think 07 is probably the right option, but as always when I dont know something, I like to get some advice from LQ members.
I use a mounted NTFS filesystem as my main data storage drive. I then symlink all my Windows folders (Documents, Pictures, etc.) into my Ubuntu home folder. Works great, because it means I can share files between Windows and Ubuntu hassle-free. However, any file created on or saved to the NTFS partition automatically has its owner set as "root". Is it possible to set the default owner to me (aaron)? Or does it have to be root on NTFS?
I dont know anything about linux and just been assigned to amount a drive to it. here's what i did so far: Version of Linux using Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root]# mount -t auto /dev/sdb1 /tmp/archive mount: unknown filesystem type 'ntfs'
when checking the /proc/filesystems, i noticed that 'ntfs' is not listed there, several forum suggested i try running 'modprobe ntfs'. If that is not found, you'll need a kernel with ntfs support. i'm so lost, where to i get the modprobe ntfs
I had windows with ntfs I installed ubuntu. All ok. Gurb with 2 os, can ran windows and ubuntu and can mount ntfs partition in ubuntu I installed debian with lvm over ubuntu partition. I can't mount ntfs partition now, and windows doesn't appears in gurb
I can't active vg because haven't name, but is not lvm, is only ntfs partition Maybe ubuntu puts in lvm and grub? Any idea? If I change with fdisk to ntfs i lose all the information in the partition?
I have download file from this site and have done these steps [URL]. tar -xvf ntfsprogs-2.0.0.tar.gz chown root.root -R ntfsprogs-2.0.0 cd ntfsprogs-2.0.0 ./configure make && make install
Still I have failed to mount ntfs partition with this command.. mount -t ntfs /dev/hda1 /mnt or ntfs-3g /dev/hda1 /mnt
The error is ................. mount: unknown filesystem type 'ntfs' I am using RHEL5.4 and kernel is 2.6.18-164.el5
my external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
Original disk: XP NTFS primary Linux / ext4 logical Linux /home ext4 logical Win 7 NTFS logical NTFS data logical swap space NTFS recovery partition
I tried to install linux, as there was a problem with XP overwriting grub, I chose write grub to /dev/sda8 (which is where the linux install was appearing earlier).
I guess this borked the filesystem somehow. Now the NTFS data partition and the swap space are appearing as one free space. Well actually before that some linux live CDs (including gparted were seeing the entire drive as unpartitioned). I had to go into XP and delete the /ext4 partitions.
Is there any way for me to recover the NTFS data partition ?
I just updated my kernel to 2.6.34.7-56.fc13.x86_64 last night and now I have no system sounds. Audacious plays my mp3's just fine, just as all my multimedia works in my web browser, vlc, etc... The only thing being affected is system sounds. I tried playing a sample with aplay and I got loud, crackling nonsense and this output code...
I just upgraded from Fedora 14 to 15. First thing that I want to say is, "Wow, this looks great." It's such an innovative, slick, modern interface. I'm very impressed. The Gnome developers did a very good job on Gnome 3 and Fedora folks did a great job with the integration into the latest Fedora distribution. I did run into a problem, though. I'm still a little bit green in the Linux world, so please bear with me. When I upgraded with preupgrade, yum came back with repository errors. I think that the problem stems from the fact that I installed firefox4 in Fedora 14 according to the instructions on the fedoraproject.org wiki [URL]. Now I have two copies of Firefox 4 installed (after the upgrade) and I'm unable to remove the extra one (yum remove firefox4 gives bupkis ). What's worse, yum doesn't work for anything else, either . I tried a "yum clean all" but that didn't fix it. I think that I need to remove the firefox4 instance of Firefox, and then remove the repository from my repo list (I think), but I'm not sure how to do that.
I have Fedora 12 x86_64 running the nvidia drivers from rpmfusion. I set them up using the howto's from rpmfusion and the good people here. I also run KDE as my desktop and try to keep gnome stuff to a minimum. Everything has been running fine, including the opening splash graphics.
I run updates today, and installed the update for KDE 4.3.4. The next time I booted, the startup animation ran, but hung once it finished. I know the system didn't totally crash because I was able to give it a three-finger salute and it rebooted. The next boot I set my startup parameters to disable the plymouth splash screen, and everything started up fine.
I updated sendmail during a routine set of updates. I found it replaced my old sendmail with sendmail+tcpwrappers. I had to create an entry in hosts.allow as my hosts.deny was set to deny all. Never had to do this before, but I had not updated sendmail in a while. Just a heads up in case anyone else is about to perform updates.
I ran a yum update a couple days ago, and it completed without error. Today I tried logging into Wordpress, and was unable to do so. I get a 403 error. Further investigation shows that I can no longer run any php scripts for Wordpress or Gallery. A look through yum log shows the following packages were installed:
Dec 13 11:22:52 Updated: mysql-libs.i386 5.0.88-1.fc10 Dec 13 11:23:57 Updated: qt-mysql.i386 1:4.5.3-9.fc10 Dec 13 11:37:40 Updated: mysql.i386 5.0.88-1.fc10 Dec 13 11:37:47 Updated: mysql-server.i386 5.0.88-1.fc10
There were no updates to apache, php, or SElinux, so I am at a loss to explain why apache is no longer able to run php scripts.
It's been months since I've used a Linux based OS. I'm a long time Fedora user so I'm not new to how Linux works. However, I was shocked to see that xorg.conf, as well as ctrl+alt_bs and ctrl+alt+f1-7 are no longer keybinds.
I installed the proprietary nvidia driver from the nonfree repos. This is where I messed up: I should have checked to note that my mothers GF6 onboard video controller isn't supported. Now, I boot into a black screen with a flashing prompt in the upper left hand corner. Normally, I would jump to the console using ctrl+alt+F1 to fix the problem manually. But, since It wont let me, I'm left in the dark.
I*had an update today and, since, Flash full screen is jerky and the sound comes as through a PVC*pipe.nybody has this problem?How do I find the updates that arrived today?*Is it possible to revert to a precedent version?
I just ran yum update, which installed about 47 packages. When I try to restart, the Linux boot loader is not being read. Apparently, the old Windows 7 boot loader that came installed on this machine is still somewhat intact on the hard drive, because when it boots, it tries to start Windows. I put in a Red Hat 5 rescue disk...but the rescue disk can't find a Linux file system on my hard drive.
Fedora 13 Dell Latitude E6500 Also...the disk is encrypted. (Not the swap or /boot)
After I install Pidgin my YUM function junst stop to work... I'm now trying to install "QEMU" and when trying to install it thru YUM I got that message below:
[root@Guga-NB Guga]# yum install qemu Loaded plugins: langpacks, presto, refresh-packagekit Adding en_US to language list http://rpm.pidgin.im/fedora/14/x86_6...ta/repomd.xml: [Errno 14] HTTP Error 404 : http://rpm.pidgin.im/fedora/14/x86_6...ata/repomd.xml Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: pidgin. Please verify its path and try again [root@Guga-NB Guga]#
I ran the automatic update today and it requested a restart afterwards. After the restart, I don't have any icons on my desktop, can't open windows other than the terminal. If I try to run software from the terminal, I get the following error.
/lib/libgcc_s.so.1: version 'GCC_4.2.0' not found (required by /usr/lib/libstdc++.so.6) /lib/libgcc_s.so.1: version 'GCC_3.3' not found (required by /usr/lib/libstdc++.so.6)
I have seen "just removed the library with an issue" or recreate the links or try to reinstall. I am running fedora 12.
Wednesday I went to work, docked and fired up my older Dell C840 laptop (running Fedora 12). It had a long list of updates that it downloaded and installed (it had been off for about a week). When the updates were finished, I noticed that my laptop had locked up. After waiting a while, I ended up doing a cold reboot. After that, I get the Fedora symbol that fills up, and then the screen goes black with a single cursor. You can type in anything and it is reflected- even control and ALT codes. If you hit CTL- ALT-F2, it goes into a terminal mode. You can do almost anything that you'd normally do in terminal mode. The video driver is the original off the install disk, and it's never been changed- it works fine right out of the box.
If I try to start up X-Windows, I get a segmentation fault error. I've tried deleting and then re-installing some of the packages that were updated (trying this via yum), no difference. I don't know what else to do. I need to get this laptop going before next week- it's my work computer and I do use it a lot. Is there any way to get in touch with the people who wrote the updates, and file a bug report? I'm using my main (home) system right now, that for a couple of reasons needs to stay on windoze XP for a few more weeks. I've been around computers for years, but not Linux.
