I do really like Ubuntu. Still working on getting my way around and finding things but overall I think its great!But I have a problem. I used my friends removable drive to watch a movie on my laptop, and when he put it back in his it doesn't work.He uses Windows 7. He has alot of stuff on his drive that we would rather not reformat, so Im here asking you fantastic people for help.So he had it formatted to NTFS and now its RAW..I have no idea how. It won't work on either my desktop (XP) or his laptop (7) but it works fine on my UBUNTU
I use a mounted NTFS filesystem as my main data storage drive. I then symlink all my Windows folders (Documents, Pictures, etc.) into my Ubuntu home folder. Works great, because it means I can share files between Windows and Ubuntu hassle-free. However, any file created on or saved to the NTFS partition automatically has its owner set as "root". Is it possible to set the default owner to me (aaron)? Or does it have to be root on NTFS?
so I just installed Ubuntu 10.10 a couple of days ago and used my whole hard drive.Thing is, I decided that although I loved Ubuntu, I stll want to have dual-boot for some cases.. But now that the disks filesystem is not NTFS, Windows cannot regognise the disk as installable and cannot convert the filesystem. Gosh, Windows is a piece of junk, but I still need them for some occasions.
I have an one terabyte HDD as NTFS File system, my life on it .. now not shown
Code: alz3abi@Hz:~$ lsusb Bus 002 Device 004: ID 1d57:000d Bus 002 Device 003: ID 1058:1100 Western Digital Technologies, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 04f2:b1d6 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I installed Fedora 13 just a few days ago, and it was all working well, until i tried to boot into my windows system. The windows boot loader said that it couldn't load a system file, and suggested i repair the windows system. it did not work, and i dont want to completely reinstall windows because i have some very important VB6 source code, that i do not want to lose. (For all you VB haters, i only use it bcus its really easy to learn. Don't bring the subject up, because i dont want this thread deleted because some jerk decides to start a flame war about it.) I worked really hard on the project, and i dont want to delete it. Fedora still works fine, but come up with this error message when i attempt to mount the NTFS filesystem:
[root@DaGeek247 ~]# mount /dev/sda1 Failed to read last sector (160071596): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,
I am new to Linux platform and have installed RHEL 6 on my computer. I have gone through different posts on websites regarding how to mount windows drive on to the Linux file system.Here are few results of my trial where results are slightly overwhelming for a guy like me:
1. Mounting NTFS file system using mount commandAs a su-) " $mount -t ntfs /dev/sda1 /media/MyFilesystem"
Output: error: unrecognised file system ntfs
2. I followed step by step instructions of installing Fuse and ntfs-3g_ntfsprogs but had no luck:
while using this command for the installation of for FUSE-0.9(which I guess prepares files for installation) I am getting this error : " Command use: ./configure --exec-prefix=/; make;make install"
Error: "Checking Kernel source directory.../usr.src/kernels/2.6.32-71.e16.x86_64...Checking Kernel source version.......Not found " Configure error: cannot determine the version of the Linux kernel source.Please configure the kernel before running this script.
Woooh , as u can see my Linux version is mentioned in that message so can anyone lemme know whether this issue is because of the incompatibility of Fuse with my version of Linux or am I suppose to make some changes in the command itself.
I would like to format a pen drive to NTFS, so that a windows machine can use it, but Im unsure of the filesystem option's in Cfdisk. These are the options:
07 HPFS/NTFS 86 NTFS volume set 87 NTFS volume set
I think 07 is probably the right option, but as always when I dont know something, I like to get some advice from LQ members.
I dont know anything about linux and just been assigned to amount a drive to it. here's what i did so far: Version of Linux using Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root]# mount -t auto /dev/sdb1 /tmp/archive mount: unknown filesystem type 'ntfs'
when checking the /proc/filesystems, i noticed that 'ntfs' is not listed there, several forum suggested i try running 'modprobe ntfs'. If that is not found, you'll need a kernel with ntfs support. i'm so lost, where to i get the modprobe ntfs
I had windows with ntfs I installed ubuntu. All ok. Gurb with 2 os, can ran windows and ubuntu and can mount ntfs partition in ubuntu I installed debian with lvm over ubuntu partition. I can't mount ntfs partition now, and windows doesn't appears in gurb
I can't active vg because haven't name, but is not lvm, is only ntfs partition Maybe ubuntu puts in lvm and grub? Any idea? If I change with fdisk to ntfs i lose all the information in the partition?
I have download file from this site and have done these steps [URL]. tar -xvf ntfsprogs-2.0.0.tar.gz chown root.root -R ntfsprogs-2.0.0 cd ntfsprogs-2.0.0 ./configure make && make install
Still I have failed to mount ntfs partition with this command.. mount -t ntfs /dev/hda1 /mnt or ntfs-3g /dev/hda1 /mnt
The error is ................. mount: unknown filesystem type 'ntfs' I am using RHEL5.4 and kernel is 2.6.18-164.el5
my external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
Original disk: XP NTFS primary Linux / ext4 logical Linux /home ext4 logical Win 7 NTFS logical NTFS data logical swap space NTFS recovery partition
I tried to install linux, as there was a problem with XP overwriting grub, I chose write grub to /dev/sda8 (which is where the linux install was appearing earlier).
I guess this borked the filesystem somehow. Now the NTFS data partition and the swap space are appearing as one free space. Well actually before that some linux live CDs (including gparted were seeing the entire drive as unpartitioned). I had to go into XP and delete the /ext4 partitions.
Is there any way for me to recover the NTFS data partition ?
120 GB HDD. All ext4. Wanted to partition it into 60 gig ntfs, and 60 gig ext4 for dual install. Booted up the LiveCD. Clicked on the partition to modify. Selected /windows as mount point. Change took place. Now, my disk shows up as 57 GB FAT (almost all of which is free) and 60 GB of unallocated space. Any way to recover it? I'm sue the data is in the 60 GB of unallocated space. While I have a back up of some of the data, I'm going to be losing quite a bit if I can't recover this...
How can I change NTFS partition size from Linux (not installing any software under Windows)? Is there any software, which can help me on this? It's desirable that this was some Gnome package.
When I try to rename a file in a mounted NTFS file system by only changing the letter case, I receive an error message saying that it is not possible because the file already exists. This must be because ntfs is not case sensitive as regards determining a file name. However, it can use and remember whatever case you want to use. So I can change the letter case in the file's name in two steps: saving the file with a different name first and then renaming it again with the original name and the letter cases I want to use.
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage *Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
I am a linux semi-noob who just got the idea that it would be fun to play with Arch Linux.I was dual-booting Windows and OpenSuSE, and I installed Arch by shrinking the Windows partition and putting a new logical partition in between the windows partition and the swap partition I already have.Unfortunately, opensuse still thinks that its root filesystem is on /dev/sda7 so it fails to boot b/c it is looking at an ntfs filesystem that I used for document sharing.If someone has a solution, that will save me from having to reinstall opensuse.
how to change the file type of /opt to vfat from ext 4. during installing fedora 15 (64 bit) on dell inspiron 1545, i choose file type of /opt as ext4 but now i have realised that it should be vfat. ans second problem during the installation the option of repository appeared and i choose "customize later ", and now i have to add some lib in "software tab", how can i achieve that?
Im usning ubuntu server 10.04 (Command-line)My second harddrive is FAT32 but i would like to change it to HTFS so i can store large files (larger than 2GB)
I am about to do a clean install of Ubuntu 10.04 and I want to have my /home on a separate ntfs partition so that it can be accessed by windows 7. I know that i can move it after the install but i wold rather not go through all the problems of moving it.
process of migrating my server to Ubuntu Server 11.04 after my Server 2003 installation suffered a HDD failure. All my data is on an NTFS drive (not ideal but not much I can do about that). I can currently only read the disk as a user. root has ownership of everything on the disk. Whenever I try and change ownership of a file it doesn't bring up any errors but when running ls -l it shows that nothing has actually changed.
I have an NTFS partition that I use to swap file back and forth between Vista and F13. I store school files in there, like documents and text files. When I use Nautilus to access the partition, I am always asked for my root password. This is a little annoying. Is there anyway I can keep this from happening?
I have my Windows partition set up to auto mount with fstab. I can access it fine in the command line and launchers that I created with out the root password. I suppose I could do the same for this partition, but I would like to access it directly with Nautilus if it is possible.
any way to change file permissions of NTFS drives? All my C programming files resides in a NTFS drive and I need to set execute permision on them in order to run. I tired chmod -Rv 777 /media/Programming. and also tired chmod 775 *.* after entering the folder in which all my files resides. but both these commands doesn't seem to have any effect on the files. I know NTFS doesn't use Unix file system and chmod command goes in vain.
I finally replaced my Windows with Linux.. However, I need to run applications and modify files that are on NTFS mounts. I am unable to change ownership, permissions, and groups on these files so I may modify them without having to copy. I have several times attempted to chmod, chgrp, chown, etc.. while logged-in as root user; however it is to no avail. The owner and permissions are still geared towards root. can I change ownership and permissions on NTFS files so I can modify them without having to convert/copy them over to ext4 or different file system?- Matbtw: I am using OpenSuse 11.4 and running Windows apps with VirtualBox (with Vista installation image). I still have Win7 on my computer (non-emulated) and I would like to keep some files on those NTFS partitions so when I occasionally need to boot into Win7 I can modify those files because Windows blows and doesn't support Linux.
