I dont know anything about linux and just been assigned to amount a drive to it. here's what i did so far: Version of Linux using Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root]# mount -t auto /dev/sdb1 /tmp/archive mount: unknown filesystem type 'ntfs'
when checking the /proc/filesystems, i noticed that 'ntfs' is not listed there, several forum suggested i try running 'modprobe ntfs'. If that is not found, you'll need a kernel with ntfs support. i'm so lost, where to i get the modprobe ntfs
my external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
I had windows with ntfs I installed ubuntu. All ok. Gurb with 2 os, can ran windows and ubuntu and can mount ntfs partition in ubuntu I installed debian with lvm over ubuntu partition. I can't mount ntfs partition now, and windows doesn't appears in gurb
Can mount.ntfs and mount.ntfs-3g reside simultaneously?
Whilst accessing an external NTFS drive mount.ntfs takes up a lot of CPU. I am not sure if its mounting the drive using mount.ntfs or mount.ntfs-3g? How do I find out and if they coexist how do I make the default mount drive ntfs-3g?
(Using ubuntu 9.04) I really don't want to trash my system! I have an external usb hard drive I want to automount on bootup / startup. Not 100% sure of the best / safest way: here is some info on my drives
ONCE MOUNTED THROUGH FILE MANAGER AND RUNNING DF AGAIN HERE IS THE DRIVE
Here is my fstab file
So the drive is a NTFS drive and it's /dev/sdb1 and label is /media/Mybook
Storage information: 1st primary:SG 160G ATA 100 1st secondary:WD 160 ATA 133 SATA:WD 1000 2nd primary:DVD 2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup: 1.Partition list:/boot,/,/home,swap 2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying. I solved the problem by the following way. 1.Boot with windows xp's install CD and use fixmbr on (hd0). 2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1) After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0). 3.Reboot and Press F8 for a boot menu then I can select which disk to boot. windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
I am wondering if anyone knows how to enable NTFS compression using Paragon NTFS 8.1 Enterprise?
The Professional version comes with a utility mkntfs which allows you to set compression as default for all files, but the Enterprise version is apparently meant to be 'fully featured' and support compression, so how do I enable compression on a drive/folder/file?
I am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get
Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?
I recently installed Fedora 13 (the KDE spin). It detects correctly my other NTFS partitions and will mount them perfectly if I click on it using Dolphin.
I would like to mount one of them automatically after booting (or logging in, doesn't matter). My first idea - and supported by a coulple of Google searches and previous threads - was to put them on on /etc/fstab.
But to my complete surprise they aren't there. Where does Dolphin (or KDE) keeps information about partitions? How to set them to automount? Also, fstab refers to my linux partitions as UUIDs not the device names - how does this work?
What should I do to set a NTFS partition to automount on Fedora 13?
I have created a desktop shortcut to the folder on NTFS volume. But it doesn't work unless the volume was mounted by clicking the icon in Places->Volume_Name. One possible solution is to mount NTFS volume at boot time but that requires editing of fstab (directly or indirectly). Is there a way to mount the NTFS volume on demand when shortcut is clicked? Maybe some sort script which would emulate clicking Places->Volume_Name first and the open the shortcut?
I have build the fuse and ntfs-3g module. Via console I can mount ntfs volumes via mount -t ntfs-3g.But under gnome I get only the messagage that the system don't support ntfs. What must I change, that the gnome volume manger (I think) use ntfs-3g to mount the volumes.
Original disk: XP NTFS primary Linux / ext4 logical Linux /home ext4 logical Win 7 NTFS logical NTFS data logical swap space NTFS recovery partition
I tried to install linux, as there was a problem with XP overwriting grub, I chose write grub to /dev/sda8 (which is where the linux install was appearing earlier).
I guess this borked the filesystem somehow. Now the NTFS data partition and the swap space are appearing as one free space. Well actually before that some linux live CDs (including gparted were seeing the entire drive as unpartitioned). I had to go into XP and delete the /ext4 partitions.
Is there any way for me to recover the NTFS data partition ?
# external hard drive UUID=4DDD273633F3859D /home/ross/external ntfs-3g auto,exec,user,uid=1000,gid=100,dmask=027,fmask=137,utf8 0 0
When I plug in the drive with this UUID, I get the following error:
Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Is there any way that I can mount this drive (which must be ntfs-formatted) without root permissions? I have googled this error and it seems that many other people are having this same problem, but I can't find a real solution. Most people suggest just reformatting the drive.
I have an external 300GB (Toshiba) disk which I encrypted (using cryptsetup luksFormat) and then installed an NTFS filesystem on (need to be able to use it in both Linux and Windows - using FreeOTFE). The disk mounts fine in windows and on my Fedora 10 system it automounts.
I can manually mount it on the RHEL5.3 system, and gnome-mount gets as far as recognising that it is encrypted and asking for the key, but it doesn't then mount it - I then have to manually mount the /dev/mapper/luks... device.
Does anyone know how to do this - if it works in Fedora 10 it ought to be possible to get it to work in EL5.3 I'd have thought.
ntfs-3g /dev/sdb1 /media/sdd7 ntfs_mst_post_read_fixup: magic: 0x00000000 size: 1024 usa_ofs: 0 usa_count: 65535: Invalid argument Record 6 has no FILE magic (0x0) Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdb1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.
I am facing an issue in linux El4,I want to mount NTFS USB Hardisk to linux, I tried to mount but i got fs related error, after I have installed ntfs-3g, then i tried to mount through this command (mount -t ntfs-3g /dev/sdb1 /mnt/usb) but now i getting Fuse error, is there any possibilty to mount NTFS disk to linux EL4 without install Fuse.
Automount of external NTFS USB drive fails when using the Device Notifier. The automount facility failed after the last kernel update. A bug report was kindly filed by @saverios. The details are in the quote at the end of this notice. Pending resolution of the bug, we recommend that you install the following workaround: Open the file /etc/filesystems and add an entry for "ntfs" so the file looks similar to this (see last entry):
I tried to mount a drive via ntfs-config and the following error occured:
Mounting /media/mOVIES failed because of the following error:
Failed to read last sector (146876415): Invalid argument HINTS: Either the volume is a RAID/LDM but it wasn't setup yet, or it was not setup correctly (e.g. by not using mdadm --build ...), or a wrong device is tried to be mounted, or the partition table is corrupt (partition is smaller than NTFS),