Red Hat / Fedora :: Mounting Of NTFS Filesystem On RHEL6?

Jul 7, 2011

I am new to Linux platform and have installed RHEL 6 on my computer. I have gone through different posts on websites regarding how to mount windows drive on to the Linux file system.Here are few results of my trial where results are slightly overwhelming for a guy like me:

1. Mounting NTFS file system using mount commandAs a su-)
" $mount -t ntfs /dev/sda1 /media/MyFilesystem"

Output: error: unrecognised file system ntfs

2. I followed step by step instructions of installing Fuse and ntfs-3g_ntfsprogs but had no luck:

while using this command for the installation of for FUSE-0.9(which I guess prepares files for installation) I am getting this error :
" Command use: ./configure --exec-prefix=/; make;make install"

Error: "Checking Kernel source directory.../usr.src/kernels/2.6.32-71.e16.x86_64...Checking Kernel source version.......Not found "
Configure error: cannot determine the version of the Linux kernel source.Please configure the kernel before running this script.

Woooh , as u can see my Linux version is mentioned in that message so can anyone lemme know whether this issue is because of the incompatibility of Fuse with my version of Linux or am I suppose to make some changes in the command itself.

View 7 Replies


ADVERTISEMENT

Software :: Mount Ntfs In Rhel6.0 Beta1?

Sep 8, 2010

how to mount ntfs of win xp in rhel6.0 beta1

View 3 Replies View Related

Red Hat / Fedora :: Mounting DVD-RW As A RW Filesystem?

Mar 1, 2010

Is it possiable to mount a DVD-RW disk as a RW filesystem so I can do things like ...

mkdir /dev/dvd/mydir
cp ~/.profile /dev/dvd
ls -la /dev/dvd

I would like to use it, even create a partition on it using cfdisk or somthing. Can I do that ? If so, what is the mount command or tools I need ?

View 2 Replies View Related

Fedora :: NTFS Filesystem Is Broke?

Aug 7, 2010

I installed Fedora 13 just a few days ago, and it was all working well, until i tried to boot into my windows system. The windows boot loader said that it couldn't load a system file, and suggested i repair the windows system. it did not work, and i dont want to completely reinstall windows because i have some very important VB6 source code, that i do not want to lose. (For all you VB haters, i only use it bcus its really easy to learn. Don't bring the subject up, because i dont want this thread deleted because some jerk decides to start a flame war about it.) I worked really hard on the project, and i dont want to delete it. Fedora still works fine, but come up with this error message when i attempt to mount the NTFS filesystem:

[root@DaGeek247 ~]# mount /dev/sda1
Failed to read last sector (160071596): Invalid argument
HINTS: Either the volume is a RAID/LDM but it wasn't setup yet,

[code]....

View 14 Replies View Related

General :: Mount - Use The Advanced NTFS-FS Package To Automount A NTFS Filesystem ?

Mar 6, 2010

I want to enable Advanced NTFS-3G support (permissions and users) automatically from the fstab entry.

View 1 Replies View Related

Fedora :: Mounting A Weird Filesystem?

Nov 23, 2009

Following a slight dose of vandalism, I have invested in a security camera system.It is basically a hard drive in a box which connects to a couple of cameras.There is also a USB lead to connect it to a PC, and some software that enables Windows to look at the recordings (I can't get it to work on WINE).I was hoping to simply bypass that, and just look at the drive directly, but it seems from here that the disk "doesn't contain a valid partition table".Obviously, the box thinks it has a valid partition table, else it would not work.I was quite surprised: I had assumed the box would have some kind of cut down Linux based system, but if that were the case, you would expect it to use a recognisable filesystem.

View 6 Replies View Related

Fedora :: Mounting NTFS Partitions In F11?

Sep 3, 2009

I've got a Desktop System that Automounted Two NTFS partitions in F10 so I could declare them SAMBA Shares and have my other XP and Vista Machine Access them whether my dual boot machine ran XP or F10. Now I've switched to F11 and cannot get the NTFS Partitions to Automount at boot. If I browse with COMPUTER and let the system mount the NTFS partitions once it is running the mount command returns the following output:

[code]....

I believe I need to modify /etc/fstab but cannot get the syntax correct to save my life.

View 1 Replies View Related

OpenSUSE Hardware :: Failure Mounting External NTFS Drive And Internal NTFS Partition / Fix This?

Jul 18, 2010

Just installed 11.3 on my computer, however when I connect an external NTFS harddisk I receive an error message. When I open dolphin to connect to an internal NTFS partition I receive the message:

org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org. freedesktop.hal.storage.mount-fixed auth_admin_keep_always <--

Anyone having an idea how I can fix this?

View 9 Replies View Related

Fedora :: Automatic Mounting Of NTFS Partitions?

Oct 29, 2009

I need to my NTFS partitions mount automatically "at first" after login without any further intervention of user.

View 11 Replies View Related

General :: Mounting NTFS With Ntfs-3g And Fuse As A User?

Jan 8, 2011

On a clean install of Arch linux I edited fstab to be like so :

Code:

/dev/disk/by-id/usb-Hitachi_HTS543232L9A300_9002555dd84a21024b000000-0:0-part1 /media/EXT ntfs-3g user,rw,uid=mas,gid=users,noauto 0 0

I tried ntfs and ntfs-3g but the result is the same I can mount root but I would like to be able to mount as a user. When I try to mount as a user I get

Code:

Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Before installing ntfs-3g I was able to mount as a user but there was no rw permission. Any way to mount an ntfs partition as a user without suid as the message said?

View 11 Replies View Related

General :: Mounting Windows NTFS Partitions On Fedora?

Sep 27, 2009

I know nothing about linux. But my friend says linux is good. So, I kept a copy of fedora core 10 i386. My fiend has a lot of movies about 100 in his ipod. So, I took it. It contains lot of viruses and I opened the ipod in windows but my windows has malfunctioned due to the virus. So, I have installed the fedora core 10 i386. I have some important information in the windows ntfs partitions. How do i mount those ntfs partitions.

View 8 Replies View Related

Fedora :: Mounting Local Filesystems: Mount: Unknown Filesystem Type 'LVM2_member'

Mar 28, 2011

I just updated Fedora 14 with the updates it downloaded and I am now stuck with the error.

View 10 Replies View Related

Server :: XFS Filesystem Not Mounting

Sep 13, 2010

I have an XFS filesystem (not my root filesystem) that is not mounting.

We had a power failure over the weekend. All but one of our XFS mounts is comming up. Its a large mount (2TB) and I am not seeing errors per se...

But after attempting to mount it, it has been 4 hours and all we see in either dmesg output or in the messages file from the kernel is:

Our mount process is dead and I don't see any disk i/o going on. Am I missing something here on this?

I rebooted the box once earlier and was able mount read-only with norecovery...

I tried xfs_check and it also produced a dead "xfs_df -i -p xfs_check -c check /dev/sdd1"

View 5 Replies View Related

Ubuntu :: Change Filesystem From RAW To NTFS?

Jun 26, 2011

I do really like Ubuntu. Still working on getting my way around and finding things but overall I think its great!But I have a problem. I used my friends removable drive to watch a movie on my laptop, and when he put it back in his it doesn't work.He uses Windows 7. He has alot of stuff on his drive that we would rather not reformat, so Im here asking you fantastic people for help.So he had it formatted to NTFS and now its RAW..I have no idea how. It won't work on either my desktop (XP) or his laptop (7) but it works fine on my UBUNTU

View 5 Replies View Related

Red Hat / Fedora :: Filesystem Check After Power Outage - WARNING: "Running E2fsck On A Mounted Filesystem May Cause SEVERE Filesystem Damage"

May 18, 2011

I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:

*/dev/sda1 contains file system w/errors, check forced it then goes on to say..

*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message

*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)

Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.

Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?

View 2 Replies View Related

Ubuntu Installation :: Recover NTFS Filesystem?

Oct 17, 2010

so I just installed Ubuntu 10.10 a couple of days ago and used my whole hard drive.Thing is, I decided that although I loved Ubuntu, I stll want to have dual-boot for some cases.. But now that the disks filesystem is not NTFS, Windows cannot regognise the disk as installable and cannot convert the filesystem. Gosh, Windows is a piece of junk, but I still need them for some occasions.

View 1 Replies View Related

Ubuntu :: External HDD Not Loading (NTFS Filesystem)

Nov 23, 2010

I have an one terabyte HDD as NTFS File system, my life on it .. now not shown

Code:
alz3abi@Hz:~$ lsusb
Bus 002 Device 004: ID 1d57:000d
Bus 002 Device 003: ID 1058:1100 Western Digital Technologies, Inc.
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b1d6 Chicony Electronics Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

View 5 Replies View Related

General :: Cfdisk And NTFS Filesystem Options?

Apr 10, 2011

I would like to format a pen drive to NTFS, so that a windows machine can use it, but Im unsure of the filesystem option's in Cfdisk. These are the options:

07 HPFS/NTFS
86 NTFS volume set
87 NTFS volume set

I think 07 is probably the right option, but as always when I dont know something, I like to get some advice from LQ members.

View 4 Replies View Related

Ubuntu :: 9.10 - Admin Password On Mounting Filesystem

Apr 16, 2010

I am using Ubuntu 9.10 (along with Win xp). I have to authenticate everytime I mount filesystem (My d: , e: drives in windows). Or to connect to the internet (I use mobile broadband) I have to authenticate, also if I have to install something from synaptics I have to authenticate. I know this is good for security but I am the only person using my computer , so is there any way out of this authentication business.

View 6 Replies View Related

Ubuntu :: Asking For Permission When Mounting NTFS In 11.04?

Jun 28, 2011

I have both windows and ubuntu 11.04. In ubuntu I can mount then edit NTFS drive without being asked for permission. It's not safe that way because anyone using my computer can edit my windows files. How do I make it ask for password when mounting NTFS?

View 2 Replies View Related

General :: Mounting NTFS Partition On Red Hat?

Sep 29, 2010

How to mount ntfs partitions into red hat linux. I'm trying to mount but not mounted that

View 8 Replies View Related

General :: Ntfs Partitions Not Mounting?

Mar 7, 2011

until recently, they did fstab mount quite happily, but now, they don't

the error I get is:

Code:
Mountall mount /media/win7 [1089] terminated with status 21
My fstab has not changed but here it is:
Code:
/dev/fd0 /media/floppy0 vfat noauto 0 0
UUID=da252821-a30d-415b-84cb-adca92be5b72 / ext4 defaults 0 1

[Code]....

Oh if I make the windows drive the first avail, then it boots just fine.

View 7 Replies View Related

Ubuntu :: Change Owner From Root On NTFS Filesystem?

Feb 4, 2011

I use a mounted NTFS filesystem as my main data storage drive. I then symlink all my Windows folders (Documents, Pictures, etc.) into my Ubuntu home folder. Works great, because it means I can share files between Windows and Ubuntu hassle-free. However, any file created on or saved to the NTFS partition automatically has its owner set as "root". Is it possible to set the default owner to me (aaron)? Or does it have to be root on NTFS?

View 3 Replies View Related

General :: Mount: Unknown Filesystem Type 'ntfs'

Jul 7, 2010

I dont know anything about linux and just been assigned to amount a drive to it. here's what i did so far: Version of Linux using Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root]# mount -t auto /dev/sdb1 /tmp/archive mount: unknown filesystem type 'ntfs'

when checking the /proc/filesystems, i noticed that 'ntfs' is not listed there, several forum suggested i try running 'modprobe ntfs'. If that is not found, you'll need a kernel with ntfs support. i'm so lost, where to i get the modprobe ntfs

View 2 Replies View Related

Ubuntu :: Mounting External Encrypted HDD With Ext3 Filesystem

Jan 20, 2010

I have a external HDD with eSATA and USB connectors available. I want to use this HDD to store my backups. The HDD should be encrypted (my main system is as well).

So here is what I did so far:
1) I used the following code to create the encrypted LUKS partition with EXT3 Filesystem:
Code:
cryptsetup -c aes-xts-plain -s 512 luksFormat /dev/sdb1
cryptsetup luksOpen /dev/sdb1 luks
mkfs.ext3 /dev/mapper/luks
The system always hang when I executed the "mkfs.ext3..." command, so I switched the HDD from eSATA to USB and then it worked fine.

2) When I switched on the ext. HDD the first time, the drive was recognized automatically and Nautilus asked for the password. I typed it in as checked the checkbox to remember the password in the future. For the backup I use a nice script that I found in another forum, where I can define a mountpoint and then the script will check for previous backups and only make a incremental backup based of the latest version. The script also mounts the drive automatically. In order to always have the same mountpoint, I want to make an entry in the /etc/fstab using the UUID of the ext. HDD.

Whatever I tried, it doesn't work. What am I doing wrong? Here is my current /etc/fstab
Code:
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/mapper/ubuntu-root during installation
UUID=2ea47421-73ce-4c66-9606-8a1db81ae640 / ext3 relatime,errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=dbdeb793-1d4e-43ea-8986-7b37fdbc9674 /boot ext3 relatime 0 2
# /home was on /dev/mapper/ubuntu-home during installation
UUID=42702091-83e6-43eb-aad1-108f43eedf9d /home ext3 relatime 0 2
# swap was on /dev/mapper/ubuntu-swap during installation
UUID=e225bcf9-908b-4226-a963-6b02ee658df1 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# Eintrag wegen iPhone
none /proc/bus/usb usbfs devgid=125,devmode=666,nodev,nosuid,noexec 0 0
# external HDD
UUID=913977f7-8fa6-416f-af79-b5f913b68f53 /media/backup-hdd ext3 noauto,users 0 0
I made the "none /proc/bus/usb..." entry because it was recommended to ensure correct behaviour of the iPhone. Not sure if I need it though.

I created the mountpoint with this command:
Code:
sudo mkdir /media/backup-hdd
Now it seems the mountpoints owner is not root - strange right?
Code:
2 4 drwxr-xr-x 3 michael michael 4096 2010-01-15 02:45 backup-hdd
How should I mount this drive correctly? It will be automounted as every USB device, but that should not be the case. I want the script to mount and unmount the drive.

View 2 Replies View Related

Debian Installation :: NTFS Mounting Failed

Nov 23, 2014

I am trying to install Debian in an old laptop. Of course, in this laptop there is windows installed and I want to respect it. My plan is to install Debian in a spare drive.Before installing Debian, I want to check what is inside each drive. In order to do that, I am trying to use the Debian installer CD. Then start an admin shell, mount the drives in read-only mode, and check their contents.

But when I run the command:
# mount -r -t ntfs /dev/sda3 /mnt/windows

I get the following response:
mount: mounting /dev/sda3 on /mnt/windows/ failed: No such device

View 2 Replies View Related

Ubuntu Installation :: Mounting NTFS Partition In 9.10 ?

Mar 5, 2010

I am trying to mount 3 NTFS partitions, but they aren't showing up in the /dev directory. If I fdisk the drive, the partition shows up, but nothing in /dev...

Here is the output of fdisk -l as well as the results of my attempt to mount the partition.

View 6 Replies View Related

Ubuntu :: Error When Mounting NTFS Drive

Aug 28, 2010

Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdc1 is already mounted on / mount failed. Not sure what happened but it worked fine till last reboot. It's a 250g NTFS drive named MEDIA device /dev/sda1. why it won't mount now.

View 4 Replies View Related

Ubuntu :: NTFS Drive Not Mounting Upon Reboot

Oct 17, 2010

I used Wubi to install Ubuntu 10.10 onto my laptop alongside Windows 7. I need to access my windows harddrive, however, so I used NTFS Configuration Tool to mount the drive. However, whenever I reboot, it fails to mount and I actually have to go back into NTFS Config Tool, delete the old mount, and remount it. This is tedious. My /etc/fbstab file looks as follows:

[code]...

View 2 Replies View Related

Ubuntu :: Mounting An NTFS Partition As Read-Only

Feb 11, 2011

I have successfully mounted the NTFS partition containing win7 via Ubuntu.

I followed these 3 steps:

Code:

Now I have unmounted the partition and want to remount it again except this time so that it is mounted as Read-Only.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved