I updated sendmail during a routine set of updates. I found it replaced my old sendmail with sendmail+tcpwrappers. I had to create an entry in hosts.allow as my hosts.deny was set to deny all. Never had to do this before, but I had not updated sendmail in a while. Just a heads up in case anyone else is about to perform updates.
View 1 Repliesi have two Pc in my home , in my first pc i installed Fedora 8 and it has a ip adderss 192.168.10.1 and DNS Name client.redhat.com And in my second system i installed Rehat Enterprise Linux 5 it has a ip address 192.168.10.2 and DNS name server.redhat.com , and this is also my DNS server(192.168.10.2), and i also want to configure sendmail server on my second system and also tell me what is necessary entry should i make into my DNS forward lookup file for running sendmail server, i read lots of post
View 12 Replies View RelatedI'm running a fresh F12 server configuration install from DVD, and I'm having some issues with getting sendmail to actually function when called from a php script..
I'm using a mail() function in php run by apache. The httpd error log reports.
Httpd Error_Log
Code:
Code:
I am having problem with my Sendmail Server configuration. I had configured my send mail macros and make it. but i m having problem with "dnl"..i dont know what to put in this line.my ISP's name or localhost..? I am trying to create sendmail server with my dynamic IP address. i Just want basic configuration to use sendmail.
View 2 Replies View RelatedWTF am I doing wrong with sendmail? I am trying to reverse alias a user as follows:
USER1 USER@MYDOMAIN.COM
USER1@hshlnb.hsh.com USER@MYDOMAIN.COM
That is how I have the entry in the genericstableWhen he sends mail, it comes from USER1@MYDOMAIN.COM, so I have the domain rewrite correct. The forward mapping in virtusertable works fine as well - he gets all mail redirected to the user1 account as specified.My sendmail.mc file has this:
divert(-1)dnl
include(`/usr/share/sendmail-cf/m4/cf.m4')dnl
VERSIONID(`setup for linux')dnl
[code]....
I have fedora running as our email server at work using sendmail. It used to have spamassassin and MailScanner installed, but one of those died over the weekend and killed the mail server. We do not need either of these as we are using a web based spam filter now (postini), so I tried removing these. I have discovered that the mail is in the mqueue waiting for delivery to the users mailboxes. I have tried using "sendmail -q -v":
Code:
Running /var/spool/mqueue/n51Jx6Gg023820 (sequence 1 of 1174)
<abaughman@grandproductsinc.com>... Connecting to local...
<abaughman@grandproductsinc.com>... Deferred: local mailer (/usr/bin/procmail) exited with EX_TEMPFAIL
Running /var/spool/mqueue/n51JsuRe023619 (sequence 2 of 1174)
<ksullivan@grandproductsinc.com>... Connecting to local...
<ksullivan@grandproductsinc.com>... Deferred: local mailer (/usr/bin/procmail) exited with EX_TEMPFAIL .....
I do not have a procmail config file: /etc/procmailrc. I am not sure why, or what it should be, perhaps that is the problem. I guess I don't exactly know how this server runs all that well. I was able to get it up and running but never understood it enough to now find what is not working correctly.
Regarding few things I am facing problem :
1. How to send one copy of that outgoing mail generated from the source. It should cc to another mail id in server's backend while mail sending.
2. I don't have any domain - internally or externally. Only have static ip, accessible from outside. Can I configure sendmail to send-receive through that ip.
3. How to transfer all mails and addressbook from exchange server to linux sendmail server.
I'm running FC10, with the sendmail that was part of it in Feb 09. Anyway, Up till now I've been using the user client to do spam filtering, But I'd like to start catching the spam at the sendmail level. What are my options today? I tried searching the forums and found a bunch of threads from 2001-2006, but I figured many of the ideas are now longer vaild.
View 2 Replies View RelatedI have a rather interesting issue. I have set up a home network and a fedora 14 box as a server. I am running the version of Sendmail that came with fedora 14. I wrote a PHP script that changes http access passwords(to give authorized access to the outside by multiple users) once a week and emails the users their new passwords. It also finds out my WAN IP (because it is dynamic, and I am using a Linksys router with NAT), and E-Mails users when this has changed along with the new access password. I have Sendmail set up so that it should log on to my websites mail server (smtp.example.net) and send the email through it.
The problem I am having is that I have set up my home server with an internal domain like exampledomain.home, but the wan IP reverse lookup returns xx.xxx.xxx.xxx.static.xxx.xx.charter.com, so that when my sendmail server connects to my smtp server for my website it gives "EHLO server.exampledomain.home" then my smtp server rejects it because the connecting IP (WAN IP) resolves toxxx.xxx.xxx.xxx.static.opls.la.charter.com gives a host not found error. Or it gives the error because server.exampledomain.home is obviously not a valid host name on the internet. I was hoping someone out there had some insight on how I could get around this without editing or adding any DNS entries to my websites domain. I would also like to avoid getting a static IP for my house as it is more expensive. I thought about making a dynamic DNS entry with dyndns.com and then making Sendmail use that host name. I dont know how to trick sendmail like that though.Here is a copy of my sendmail.mc (scrubbed of course).
divert(-1)dnl
dnl #
dnl # This is the sendmail macro config file for m4. If you make changes to
[code].....
Just upgraded to F15 and I cannot seem to get the sendmail service starting at boot time.It starts and works just fine by hand after boot, so there's nothing wrong with the sendmail
configuration itself."runlevel" shows a current run level of 5 and "chkconfig" shows sendmail on for run level 5.All the other mail service (mailman, clamd, etc.) start fine.Doing "service sendmail start" after boot gets everything up and running just fine, but itsure would be nice to have it run at boot like it used to
I am trying to setup sendmail on a fc10 box with dovecot running imap. I have everything configured and running on the server. For example, when I run "echo 'test' | mail -s test user@mydomain.com" or even to someuser@gmail.com, the mail goes through just fine. I can then reply from both of those accounts back to the server, no problem.
Relaying denied Cannot send mail. The SMTP server does not recognize any of the authentication methods supported by Entourage. Try changing the SMTP authentication options in Account settings or contact your network administrator.
I found 2 previous posts, one from 2005 and one from 2006. The 2005 post was not very helpful and the 2006 threads are not exactly what I was expecting. So I wanted to ask the question to be sure. I have already stood up the new fedora 12 server. The old server is also fedora 12. I need to migrate local users and sendmail mailboxes. In the past couple of years the environment was small enough to create a copy of the users and then have the users mail themselves, but I want to start migrating users/mailboxes properly.
On a unix level I am a jr admin, but I have extensive senior level experience as a windows engineer and network engineer. I do feel comfortable with using the unix command line, but usually operate the unix systems thru webmin because I am not familular with more complex commands. Ideally a software solution to migrate users and/or mailboxes from one server to another is what I am looking for, but in leiu of a software solution I still need to migrate user accounts and their mailboxes. LDAP is not in place, but if the process becomes easier with LDAP I am willing to do what is needed to set up LDAP. (I have no previous experience setting up LDAP)
I do not want to change my mail server from sendmail to different software. At least right now. Both systems are up and running. They can connect to each other via public ipv4 address' only. The new server has already been installed and configured with all the software to match the old server. How do I migrate users and sendmail mailboxes from one fedora 12 server to another fedora 12 server?
I've been using cyrus and sendmail together for a very very long time now. Just recently I upgraded to fedora 13 and now my virtual users can not send email from the /etc/sasldb2 passwords. I get in the /var/log/messages sendmail[31427]: unable to open Berkeley db /etc/sasldb2: Unknown error: Its weird that they can still log in and get email from imapd.conf
sasl_pwcheck_method:auxprop saslauthd
sasl_auxprop_plugin: sasldb
sasl_mech_list: LOGIN PLAIN CRAM-MD5 DIGEST-MD5
[code].....
I even tried re-creating sasldb2 and sasldblistusers2 shows my two users 'one' that is also a local user account and the saslauthd authenticates when sending emails, but the virtual user 'two' can't send just only can log in to receive. /etc/sysconfig/saslauthd is set up as mech=pam. but I don't see how that would be relevant to this issue.
I've setup a network within my lab and only gave access to local machines (Redhat 5,and a windows server 2000) ,First i have succeded to enable iptables,logwatch,nfs,logwatch,portmap,tcpwrapper.
this is my hosts.allow file: code...
Now i want to use ssh from a remote machine, i have disabled iptables,nfs,logwatch,portmap
what should i do to be able to access my network from my laptop which is not connected to my network?
I could not find any where the documentation the only best which I got was [URL]
My question is the following blog says to remove an IP from /etc/hosts.deny which denyhost has blocked
[URL] you need to have a directory /usr/share/denyhosts/data I do not find any such directory
Also when I tried to check tcp wrapper configuration as given here
[URL]
tcpdchk -v Cannot find your inetd.conf or tlid.conf file. Please specify its location.
what does the above output mean? How do I make sure denyhosts is doing its job?
I've been using Ubuntu 10.10 (Maverick) for some time now as the OS for a home Nasbox, along with webmin. Its been great, and I've been able to SSH into the box without any issues in the past.Last night, I ran apt-get update and apt-get upgrade to bring my system more current.
Now, I can't seem to log into SSH any longer, and get a "Connection failed, Windows error 10061" error.I'm going to upgrade the OS to 11 as well in hopes things fix themselves.
I'm new to send mail. I have a server with a public address and domain name. But I only want to implement a small sendmail network on our 20-user LAN. Can I turn my public server into a sendmail server? Are there any simple step-by-step instructions for this?
View 1 Replies View RelatedI currently have Zarafa and I am going to install MythWeb for MythTV.To solve the permission problem for installing amportal (FreePBX), I have to change Apache's user and group to Asterisk instead of this, which I've commented out:User ${APACHE_RUN_USER}Group ${APACHE_RUN_GROUP}Once FreePBX is installed completely, I checked to make sure FreePBX is working and it worked. I used the latest version of Asterisk from the SVN trunk, so I used ./install_amp --my-svn-is-correct.However, I want to use Zarafa AND FreePBX, I just don't like having to change the Apache User and Group to asterisk.Here is a couple of examples of instructions when installing FreePBX:Is there a workaround? I really want to change it back to what it was before while FreePBX can still access their own directories.
I did not know if this question has been asked, but I thought I'd ask here. I've added "zarafa" and "mythweb" to the tags list my thread.Update: I changed my apache configuration file back to www-data for User and Group and I do have /var/lib/asterisk/agi-bin and /var/www/asterisk (where FreePBX PHP pages are installed in /var/www/asterisk) owned by asterisk:asterisk. But I get this:
Code:
Retrieve conf failed to copy file(s) from a module's agi-bin dir: copy(/var/lib/asterisk/agi-bin/directory): failed to open stream: Permission denied
[co0de]...
I want config ubuntu to send mail with sendmail. Any manual for cinfig sendmail in Ubuntu.
View 4 Replies View RelatedThe sendmail was setup in default condition. While testing some php application using @mail function, it uses the sender name as "www-data@xxx.com". How to replace the "www-data"?
View 2 Replies View RelatedI recently inherited an Ubuntu server where the previous admin had installed sendmail and FCheck IDS.The issue I am encountering is that sendmail appears to be rewriting both /etc/mail/m4/dialup.m4 and /etc/mail/sendmail.cf constantly (at least once per hour).dailup.m4 never seems to change (other then the creation date), while sendmail.cf has the line describing who and when it was built changed.So far I have had no luck tracking down why sendmail would be rewriting these files.
View 2 Replies View RelatedWhen I use sendmail (or, most commonly, a PHP or Perl script uses it) to send to any other domain except my own, it works great. When I use it to send to my own domain, however, it's trying to deliver it to localhost. Problem is, all our mail is handled by an Exchange server on a different machine, so I really don't want If I run sendmail manually for a test message to myself, here's how it comes up after the message is closed out:
Code:
echo "Subject: test" | /usr/sbin/sendmail -v me@domain.com
354 Enter mail, end with "." on a line by itself
>>> .
050 <me@domain.com>... Connecting to local...
[code]...
The message then gets dropped into my box at /var/mail/xxxx, but that's really not helpful to me -- I need to to connect to that other machine to deliver the mail there. This machine isn't used as a mail server at all. Also, if it's trying to send to a username that doesn't have an account on this server (we have many), it just fails entirely with "user unknown" (that makes sense, as there are only a couple of user accounts on the web server). how to get sendmail to connect to our mail server instead of "local"?
I wrote/cobbled-together this nifty sendmail script to read some logs and take some disk stats. basically i'm reporting on rsnapshot. When I run it as
Code:
sudo /etc/rsnapshot/mailSta.sh
Everything works wonderful and the emails arrive as expected and fires off an email to two accounts at a remote server
I currently have sendmail installed. It starts as a daemon but I want to avoid doing that. I want to start it manually.Also am a dynamic host.so every time i start my computer my ip changes. I use ddclient to update my records at dyndns.com.but how to configure sendmail in the case of dynamic hosts since it looks at the file /etc/hosts which contains information about the static hosts.
View 2 Replies View RelatedI have sendmail running (quite well) on my ubuntu box. It worksfine with Thunderbird locally. It runs fine with a few other MUAson (allowed) remote machines. It has one small problem I have notbeen able to clear up: it will not send mail that is initiated bythe 'mail' program locally. It gives me a "[127.0.0.1 connectionrefused] error in the logs. The /etc/hosts file is fine (as faras I know). The sendmail.cf file has been rebuilt from sendmeil.mc.'hostname' and 'dnsdomainname' return proper values. Okay, I'mstumped and looking for another set of eyes on the problem.
View 2 Replies View Relatedhow I could save all of the mail sendmail processes to a named pipe?
View 5 Replies View RelatedI have an ubuntu server virtual machine with a webhost. I am trying to configure the firewall. I am having a problem with sendmail and the required firewall configuraiton If I type the command:
iptables -F
Then sendmail works perfectly. I can see the emails sent in my googlemail inbox. I then configure my firewall as follows:
iptables -F
iptables -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -p tcp --dport 2252 -j ACCEPT
iptables -A INPUT -p tcp --dport 80 -j ACCEPT
[Code]....
(I have moved SSH to a diffrent port) Once this is setup sendmail no longer works. I had assumed that sendmail will establish a tcp connection and the first rule will allow all established connections to pass. why this iptables/netfilter config stops sendmail from working.
I am trying to send an email by sendmail (ubuntu) to external servers, but unable to send. following is what i am trying to do and what i got the response:
sendmail -v xxx@hotmail/gmail.com < mail.test
where mail.test contains
[COLOR="rgb(105, 105, 105)"]
From: bla@bla.com
[code]....
I am using webmin for my daily tasks. I have fedora 13, whenever I click on ''Sendmail M4 Configuration'' or Outgoing Addresses (generics)'' I get the following error message
Quote:
The Sendmail M4 configuration base directory /usr/share/sendmail-cf was not found on your system, or is not the correct directory. Maybe it has not been installed (common for packaged installs of Sendmail), or the module config is incorrect. I read documentation at sendmail.org, it seems that structure of directories for send mail has been changed in version sendmail-8.1.4 shipped with FC13. In webmin config module we have
Quote:
Sendmail M4 base directory = /usr/share/sendmail-cf
which is not there. I did a locate / sendmail-cf on the command line, it finds nothing
I have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....