General :: Failed To Mount NTFS In RHEL5 - Unknown Filesystem
Apr 6, 2010
I have download file from this site and have done these steps [URL].
tar -xvf ntfsprogs-2.0.0.tar.gz
chown root.root -R ntfsprogs-2.0.0
cd ntfsprogs-2.0.0
./configure
make && make install
Still I have failed to mount ntfs partition with this command..
mount -t ntfs /dev/hda1 /mnt
or
ntfs-3g /dev/hda1 /mnt
The error is .................
mount: unknown filesystem type 'ntfs'
I am using RHEL5.4 and kernel is 2.6.18-164.el5
View 3 Replies
ADVERTISEMENT
Jul 7, 2010
I dont know anything about linux and just been assigned to amount a drive to it. here's what i did so far: Version of Linux using Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root]# mount -t auto /dev/sdb1 /tmp/archive mount: unknown filesystem type 'ntfs'
when checking the /proc/filesystems, i noticed that 'ntfs' is not listed there, several forum suggested i try running 'modprobe ntfs'. If that is not found, you'll need a kernel with ntfs support. i'm so lost, where to i get the modprobe ntfs
View 2 Replies
View Related
Apr 27, 2011
I had windows with ntfs I installed ubuntu. All ok. Gurb with 2 os, can ran windows and ubuntu and can mount ntfs partition in ubuntu I installed debian with lvm over ubuntu partition. I can't mount ntfs partition now, and windows doesn't appears in gurb
# mount /dev/sda1 /mnt/windows/
mount: unknown filesystem type 'LVM2_member'
# pvs --all
PV VG Fmt Attr PSize PFree
/dev/dm-1 -- 0 0
/dev/dm-2 -- 0 0
/dev/root -- 0 0
[Code]....
I can't active vg because haven't name, but is not lvm, is only ntfs partition Maybe ubuntu puts in lvm and grub? Any idea? If I change with fdisk to ntfs i lose all the information in the partition?
[Code]...
View 4 Replies
View Related
Mar 6, 2010
I want to enable Advanced NTFS-3G support (permissions and users) automatically from the fstab entry.
View 1 Replies
View Related
Dec 20, 2010
What is the procedure for mounting NTFS drive in RHEL5.
View 1 Replies
View Related
Apr 3, 2010
I have Redhat Enterprise linux 5 and Windows 7 installed in my PC. I want to mount NTFS partition from linux.
View 3 Replies
View Related
Mar 27, 2010
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
View 6 Replies
View Related
Mar 12, 2010
I installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
View 1 Replies
View Related
Apr 10, 2011
my external HDD of 750GB bring me an error during mounting!it asks me to get to windows and reboot twice or cmd chkdsk/f of which when i do it only option comes is to format it, i do not wanna format it coz it's with a lot of ma useful data!am using debian just asking if its possible to retrieve ma data from it using commands persay and what are those
View 2 Replies
View Related
Dec 24, 2010
Kubuntu 10.10 nicely mounts vfat external media as UTF-8, see for example my disk-on-key:
Code:
/dev/sdd1 on /media/DOTANCOHEN type vfat (rw,nosuid,nodev,uhelper=udisks,uid=1002,gid=1002,shortname=mixed,dmask=0077,utf8=1,showexec)
However, NTFS external media is not UTF-8, and it is giving this user a hassle as her native language cannot be represented in ASCII: Code:
[Code]....
View 2 Replies
View Related
Aug 26, 2011
I recently upgrade my armel NAS from etch to squeeze. During the partitioning step of the installation I intentionally left unmounted the data partition (900GB formatted XFS) but after the installation I'm not able to mount it.
I edited the fstab file adding the last line
And tried a mount but I get the message
So i noticed throught lsmod that I don't have the module for xfs
Tried installing xfsprogs but it didn't helped. So I searched for xfs-modules but seems it doesn't exists for armel architecture. Am I right? What does it means? That XFS is not supported in armel Squeeze? Assumed I can't transfer/backup 900GB of partition, is there a way to convert it on-the-fly to a supported filesystem format?
View 8 Replies
View Related
Feb 5, 2010
i am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'
View 8 Replies
View Related
Mar 28, 2011
I just updated Fedora 14 with the updates it downloaded and I am now stuck with the error.
View 10 Replies
View Related
Feb 21, 2010
Formated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:
>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore
Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.
View 6 Replies
View Related
Nov 29, 2010
I'm running Ubuntu 9.10 on a dell desktop from idk when, its fairly old but regardless it was all running fine until about a week ago I got the infamous:
Mount of filesystem failed. A maintenance shell will now be started. Control-D will terminate this shell and start a new one. admin@ or whatever it is you get the point.
I've been trying all the possible solutions I could find and nothing seems to work. I just want to be able to use this computer. I don't care if I lose files, or have to re-install Ubuntu or any of that, if I can just get the thing running again. I've tried re-installing, and booting from the disc etc. none of which have worked. Basically, I just want to erase Ubuntu and re-install it.
View 3 Replies
View Related
Feb 15, 2010
I have a dual booting newly installed 64 bit Ubuntu 9.10 on my machine. It was all fine until today. Now when I boot into Ubuntu, I see the error Failed to mount root filesystem. I cant remember any significant changes during the last session. One thing I remember is I upgraded the system using the update manager which asked me to choose an option for grub boot loader. I opted for its upgradation. After the upgrade, I was able to work with Ubuntu for a few more sessions. Windows XP works very fine.I checked other threads which suggested running fsck, but it did not help. fsck does not report any errors.
View 1 Replies
View Related
Feb 16, 2010
Mount of file system failed.this is the message i get wen try to boot into ubuntu 9.10 i dont knw how to rectify it
View 2 Replies
View Related
Mar 24, 2010
I have a 64 bit Karmic system with two drives. One is mounted as / and the other is mounted as /home. I just put the video card from my system into my son's system and got a new video card. (Don't see how it's related but still...)Now I am getting the following message when I turn on the system. code...
View 1 Replies
View Related
Jul 31, 2010
Running F12 on my compaq evo N410c. Did a system restart 4rm gnome logged in as root & now grub cant mount my root filesystem, it boots vista though. How do i rectify dis.
View 2 Replies
View Related
Apr 19, 2011
I was using 9.04 for a while because it was working for me, I decided to upgrade yesterday using the Upgrade button on synaptic to 9.10. Now when I boot I get an error message:
Code:
chroot: cannot execute /etc/apparmor/initramfs: No such file or directory
Mount of filesystem failed.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and re-try
I want to try to fix the problem so I do not have to do fresh installation.
View 5 Replies
View Related
Apr 30, 2010
After upgrading and restarting my laptop, The purple splash screen hangs, and the terminal gives this message.
Code:
Also the boot menu does not show (I cannot open the recovery mode)
View 2 Replies
View Related
Oct 3, 2010
Crashed System left at root @ maintenance shell. Below is the sequence after boot, with Exact Errors. How to Salvage important files from my crashed laptop hardware.
A) Via a Transfer to a USB stick in Terminal, would be ok
B) Via SSH through the router from the good laptop that is Preferably using Nautilus / GUI, Terminal also ok (less confident of my skill here)
C) Directly Fixing Laptop and being ably to use Nautilus / GUI to Copy Files to USB stick, localy
The result of some effort:
A) the USB stick is good but Can't get in to it from the crashed laptop
B) SSH: No luck I get: "Cannot display location "sftp://192.168.1.101/"" from the good Machine
C) at a lose here...
The Crashed Laptop is:
Ubuntu: 9.10
Linux: 2.6.31-22-generic
Gnome: 2.28.1
CPU: Intel Atom N280 @ 2GHz
NO: CD / DVD Drive
(USB Boot maybe possible? Have not made a Bootable Ubuntu USB Yet)
BOOT:
GNU GRUB Version 1.97~
Ubuntu, Linux 2.6.31-22-generic
etc / (& recovery mode)
Mini Ubuntu logo or splash screen
File-system checks are in progress sticks every time at 4%
init: mountall main process (418) terminated with status 3
#(it seem to count up every time I re try to boot ? (init: mountall main process (423)(429)(etc)
Mount of filesystem Failed.
A maintenance shell will now be started.
CONTROL-D will terminate this shell and re-try
root@Bi-Ji-Ben:~#
I can navigate around but cant get the GUI up
root@Bi-Ji-Ben:~# nautilus
could not Parse arguments: Cannot open display:
A good USB stick reads & writes in another laptop running Ubuntu 9.10. When I connect the USB to the Crashed Machine it starts with:
"assuming drive cashe: write through", and hangs on this tell I press: "Ctrl+C"
In the crashed machine I can't seem to get into the USB anywhere that I think it should show up and trying to "mkdri" got me:
"Read only file system".
View 2 Replies
View Related
Jan 12, 2010
My Fedora 12 System was failed when booting.The message like that : mount: wrong fs type, bad option, bad superblock on /dev/mapper/my_vol missing codepage or helper program, or other error. In some case, useful info is found in syslog - try dmesg | tail or so Can't mount at root filesystem. [drm: drm_mode_rmfb ] *ERROR* tried to remove a fb that we didn't own. Boot has failed, sleep forever. I guess something wrong with my hard disk, so the bootloader can't recognize the filesystem type.
View 2 Replies
View Related
Dec 11, 2010
When I try to mount a linux file system that was encrypted using cryptsetup I get the following error:
debian:/# mount /dev/sdb3
Command sukey slot 0
mount: u moet een bestandssysteemsoort aangeven
mount failed with run_sync status 32
Command failed: Device busy
mount.crypto_LUKS(crypto-dmc.c:168): Could not unload dm-crypt device "/dev/mapper/_dev_sdb3", cryptsetup returned HXproc status 240
"mount: u moet een bestandssysteemsoort aangeven" is dutch for
"you must specify filesystem type"
View 10 Replies
View Related
Jun 17, 2011
I had a LiveUSB of CentOS 5.5, so I decided the install it.With no installer,I just copied the files to my hard drive.his was in a multi boot with Windows 7, Ubuntu 9.10, and FreeDOS.I updated GRUB2 and it detected CentOS. I loaded my entry and it failed to mount the root filesystem.I took the initrd0 file from the LiveUSB syslinux folder and added that ramdisk to the entry. Now it finds the root filesystem (/dev/sda9 as Ext3).But it fails shortly after loading /sbin/init. It talks about an init error where it says "File not found!!!".The previous lines involved umounting old filesystems, like /dev.
View 4 Replies
View Related
May 23, 2010
A friend of mine upgraded his pc to ubuntu 10.04. Sadly enough we ran into issues with his graphics card, which apparently doesnt work well with lucid. We decided to downgrade to 9.10. I did this by installing over the old partition and chose to import the settings from the old account.The problems started when the pc booted for the first time:The list of kernels in grub2 was the one from 10.04.Somehow grub2 from the old installation seems to be still around and messes everything up. Any ideas how I could fix this?
View 6 Replies
View Related
Sep 9, 2010
I upgraded 9.10 to 10.04 via the web. The program announced it would take several hours, and when I came back to check, computer was off (kids?). Anyway, machine boots and 10.04 starts, but then blinks a few times and goes to a prompt. What should I tell it?
I have a 10.04 disc too, but it won't run from that either (Cannot mount dev/loop0 on filesystem.squashfs failed). Same message when I tried to start a nearby Windows machine with it. Disc "verified" when I made it. What's with that?
View 2 Replies
View Related
Nov 21, 2010
I decided to try to do the 3 distro upgrade stretch from 8.04 to 10.04 this weekend and now I am hung on 9.04 to 9.10.. The upgrade went swimmingly, but I hit a wall upon boot. When I try to load kernel 2.6.31-22 I am greeted with the following error:
Code:
[ 20.879845] ACPI: I/O resource vt596_smbus [0x400-0$407] conflicts with ACPI region SMOV [0x400-0x406]
Mount of root filesystem failed.
A maintenance shell will now be started ... After doing some digging I found this thread which appears to be similar in the inability to mount the filesystem. However, it does not mention the ACPI error. I tried everything in that thread; verifying device ID's, editing fstab options; running a filesystem check, and flipping the UTC option in the rcS file but nothing worked. The OP of that thread eventually did a fresh install of Karmic; but I would rather not have to go that far.
View 3 Replies
View Related
Jan 9, 2010
I've downloaded Fedora 12 and decided to try and install it on my old laptop which is currently running Ubuntu 9.10 with no problems.
When I boot from the live cd, it starts to load with the 3 bars on the bottom, one on top of the other, one is white, one is dark blue, the other is in between those colours in the spectrum somewhere....
Anyway, the load bars complete and "Fedora 12" turns white, then the following output populates:
mount: unknown filesystem type 'DM_Snapshot_Cow' (<----- repeated a bunch of times) can't mount root filesystem Boot has failed, sleeping forever.
View 9 Replies
View Related
May 13, 2010
I`m unable to mount my second hard drive I use to store my music and pics and wonder if it is to do with the error "failed to initialise HAL!" which I get every time I start Debian Lenny (AMD64 architecture). I have had this since doing an install (fresh) a few hours ago.
The drive is an ntfs one but when I click its icon in the computer section it says it cannot mount it and gparted says it cannot read the file system.If so how would I get the error box to stop appearing and how do I mount the ntfs drive?
View 2 Replies
View Related
