I just upgraded from Fedora 14 to 15. First thing that I want to say is, "Wow, this looks great." It's such an innovative, slick, modern interface. I'm very impressed. The Gnome developers did a very good job on Gnome 3 and Fedora folks did a great job with the integration into the latest Fedora distribution. I did run into a problem, though. I'm still a little bit green in the Linux world, so please bear with me. When I upgraded with preupgrade, yum came back with repository errors. I think that the problem stems from the fact that I installed firefox4 in Fedora 14 according to the instructions on the fedoraproject.org wiki [URL]. Now I have two copies of Firefox 4 installed (after the upgrade) and I'm unable to remove the extra one (yum remove firefox4 gives bupkis ). What's worse, yum doesn't work for anything else, either . I tried a "yum clean all" but that didn't fix it. I think that I need to remove the firefox4 instance of Firefox, and then remove the repository from my repo list (I think), but I'm not sure how to do that.
I*had an update today and, since, Flash full screen is jerky and the sound comes as through a PVC*pipe.nybody has this problem?How do I find the updates that arrived today?*Is it possible to revert to a precedent version?
Getting sound to work in Linux has been nearly impossible since I upgraded from Ubuntu Jaunty to Karmic. I finally had it working for about 6 months in Fedora 12, then I upgraded to 14. </rant> When I install pulse, I can hear the login sound on KDE, and the KDE error sounds, and that's it. I can't even hear sounds from the test button in the Phonon settings.With ALSA alone,I get absolutely nothing. I've already been through this which was minimal help.
I just updated my kernel to 2.6.34.7-56.fc13.x86_64 last night and now I have no system sounds. Audacious plays my mp3's just fine, just as all my multimedia works in my web browser, vlc, etc... The only thing being affected is system sounds. I tried playing a sample with aplay and I got loud, crackling nonsense and this output code...
I have upgraded from 10.10 to 11.04. I have been using wmii as window manager under ubuntu for years. After the upgrade it's entirely broken.
The metakey is not working anymore, I cannot do anything. The key itself works fine in other environments so is's no hardware issue. After several attempts I completely uninstalled wmii, removed all relevant folders in home and /etc/X11 and reinstalled wmii from the ubuntu repositories.
This fresh install does not work. It starts a strange looking wmii without any key responding to my actions. I copied my old wmiirc to ~/.wmii. When i log in I see my individualized wmii but the metakey is not working and i cannot do anything, like opening a shell.
Edit: A change to "MODKEY=ALT" in wmiirc does not change anything.
I just upgraded to 11.04 with a fresh install on a Dell Inspiron E1405. Got everything else working, but can't get my BBTether to work again.
Message says it usually means the BB is not responding. But it is also happening with Virgin Mobil Broadband stick. Both are USB connections. USB flash drive seems to work.
BBTether OUTPUT Will run bbtether with args: ['verizon'] Starting Modem thread -------------------------------- BBTether 0.3m Thibaut Colar - 2009
Servlet were working. The next to last yum upgrade broke servlet. I now get a error 404 Object not found!
The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
I have not been able to find any docs on how /usr/share/java/tomcat5-jsp-2.0-api.jar or /usr/share/java/tomcat5-servlet-2.4-api.jar are connected to apache httpd.
use to be mod_jserv then a tomcat.conf but can't find on centos distro.
After yesterday's apt-get dist-upgrade, I lost my higher screen resolutions. Only had 800x600 and 640x480. After trying to re-install the Nvidia drivers several different ways without success, I ended up purging xorg and xserver and then starting from scratch, re-installing the drivers. In doing so, I either found the problem, or created another, ha.I think part of the problem was that I mixed Nvidia proprietary and debian installations and the update broke the drivers.I am now unable to install xorg or xserver because I can not remove/purge libgl1-nvidia-alternatives.
I upgraded to 9.1 and now my web browsers are not working properly--FireFox would not connect to certain sites, others worked fine. I installed Chrome and it worked for a short period--now none of my browsers work at all and package install manager does not work. Overall performance is much slower than before upgrade--boot time is about 4 times slower. I'd like to fix this build because I had it tweaked just the way I liked it before the upgrade--it was working great and now I'm sorry I upgraded there any hope or should I just start with a fresh install of 9.1 or even the previous version
Just upgraded to Karmic using the update manger. After the update, sound is no longer working. When I go to system>preferences>sounds and go to the Hardware tab it says there are no devices to configure.
So after my Natty upgrade, mpd stopped working. All I can see in the logs are the following lines:
No protocol specifiedxcb_connection_has_error() returned true The Pulse Audio wiki suggests that this might be an access rights problem: [URL]...hts_are_broken I tried that, but with no success.
Anyone else had this problem? And any ideas about how I can diagnose and fix this?
I'm running Ultimate Edition 2.4 on an Acer Aspire 3500 lappy, yesterday I allowed my system to upgrade the kernel (from 9.10 kernel 2.6.31-17 to 2.6.31-18 generic) as per usual but when it rebooted I had no WiFi. The network manager didn't even have a wireless section, only wired, and I couldn't setup a wireless network either. If I reboot into the earlier 2.6.31-17 kernel everything is OK. Another problem is that even tho I have no screensaver enabled and no power saving options enabled, (ie screen never disabled) after a short time of no use the screen goes blank. If within a few minutes I touch the pad or hit a key the screen returns but if it's been an hour or so nothing I do will wake it up,even tho there is still disk activity etc, and the only way to recover is with a hard reset, hold power key to reboot.
Yesterday, I ran a security update that upgraded my Squeeze kernel from 2.6.32-48squeeze8 to 2.6.32-48squeeze9.
Ever since then, my suspend to ram (STR) function is broken.
The machine will suspend normally, but will not resume. When I try to awaken the machine, I can hear the fan in the tower start up (the subject machine is a desktop computer, please see below for specifics), but the machine seems to be otherwise dead (e.g. the monitor stays blank, pressing the "caps lock" key on my keyboard does not activate said keyboard's "caps lock" led, Ctrl-Alt-F[x] has no effect, etc). My only recourse at that point is a hardware reset (ouch!).
I tried running Code: Select allpm-suspend from a terminal, with no joy. Same result running Code: Select allecho -n "mem" > /sys/power/state from a terminal.
I checked the /var/log/pm-suspend.log file and noticed that each Code: Select all...performing suspend line used to (before said kernel upgrade) be directly followed by a Code: Select all...Awake. line, but, now, all said Code: Select all...performing suspend lines are followed by an Code: Select allInitial commandline parameters... line.
Before this, STR has worked well ever since I first loaded Squeeze on this machine back in 2012.
Code: Select allSqueeze 6.0.10; 2.6.32-5-amd64
Intel i7-980 Gulftown CPU Asus P6X58D Premium Motherboard EVGA GeForce GTS-450 Graphics Card G.SKILL Ripjaw DDR3-1600, PC3-12800, 1.5v RAM (6x4GB sticks, 24GB total) Crucial RealSSD C300 128GB SSD Western Digital Caviar Black 1TB HDD Corsair HX850 PSU
I'm running debian testing on my laptop. This morning when I ran apt-get update && apt-get dist-upgrade, I was greeted by the following errors:
Code: Select all
Calculating upgrade... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information to resolve the situation:
The following packages have unmet dependencies:
libcurl3-gnutls : Depends: librtmp1 (>= 2.4+20131018.git79459a2-3~) but it is not going to be installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages.
A quick search found out that package librtmp1(2:2.4~20150315.gita107cef9b-dmo1) is already installed.
I do have some packages set on hold, however I don't think that's the problem:
Code: Select all$ dpkg --get-selections | grep hold hostapd hold libgcrypt11:amd64 hold linux-image-amd64 hold
My sources.list on which I haven't touched for a very long time:
Code: Select alldeb http://mirrors.163.com/debian/ testing main non-free contrib deb-src http://mirrors.163.com/debian/ testing main non-free contrib
deb http://mirrors.163.com/debian-security/ testing/updates main contrib non-free deb-src http://mirrors.163.com/debian-security/ testing/updates main contrib non-free
deb http://mirrors.163.com/debian/ testing-updates main contrib non-free deb-src http://mirrors.163.com/debian/ testing-updates main contrib non-free
I upgraded from Wheezy to Jessie yesterday and no longer have sound. I don't think anything is muted. I checked alsamixer and everything is on. MOC, VLC, speaker-test and aplay are all giving me errors. MOC refuses to load.
Code: Select allccc@de:~$ speaker-test
speaker-test 1.0.28
Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Playback open error: -2,No such file or directory Code: Select allaplay /usr/share/sounds/alsa/Front_Center.wav ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave aplay: main:722: audio open error: No such file or directory
Code: Select allccc@de:~$ mocp Running the server... Trying JACK... Trying ALSA... ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave Trying OSS...
Upgrading from 9.04 -> 9.10 broke my ability to scan using iscan.
Scanner:Epson NX100 (all in one connected via usb) Arch:386 iscan:2.23.0-3.ltdl7 (latest .deb from avasys) xsane:0.996-2ubuntu1.1 xsane-common:0.996-2ubuntu1.1 sane:1.0.14-7 libsane:1.0.20-4ubuntu3
[Code]...
If I attempt to run as with escalated privileges, I don't get the error pop up window, but the window goes dark as if it stops responding and then it just closes with no stdout except ,"WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect"
I just did the latest upgrade in 9.10 via the update manager and it required a reboot. When I rebooted Ubuntu failed to load. In recovery mode it fails saying that it can't find my root device and has some suggestions about what might be wrong. I looked at the file it listed in /proc/something and the devices available by uuid in /dev/ and what's listed in /proc/something isn't in dev. I haven't made any changes yet for fear of causing worse damage. The shell it bumps to is ASH and it doesn't look to have much editor support to make changes to the proc file(ECHO > ?). Is there a safer way to get my system back online?
I'm running 9.10 AMD64 on a Dell Inspiron laptop with a dual boot to Windows 7 (For browser testing web apps/sites)
Since my distribution upgrade to 10.04 my VirtualBox guest of XP SP3 will not boot, it bluescreens and reboots. I can boot the guest in last known good config and in safe mode but I have no CDROM. I attempted a tools install over the lan but that resulted in the same blue screen. Tried installing the virtualbox-3.2 beta package and guest tools and had the same results..
I had a working workstation with Karmic. Then I decided to upgrade to Lucid. Bad move, it turns out.First the upgrade crashed. Just stopped doing something for hours on end, and I eventually had to reboot. After that, I had to apply lots of apt-get and dpkg love to get the machine to book. Now, I *think* I have a Lucid system, at last. Only that it doesn't work where the Karmic system used to...Our setup uses kerberos and autofs. To begin with, the upgrade lost my /etc/krb5.keytab (making it impossible to log in), but that can be easily replaced.Now, I can log in, but my home directory doesn't get mounted. In /var/log/auth.log, I get this:
Code: Jun 23 11:13:58 pc13477 gdm-session-worker[1801]: pam_krb5(gdm:auth): pam_sm_authenticate: entry (0x0) Jun 23 11:13:58 pc13477 gdm-session-worker[1801]: pam_krb5(gdm:auth): (user hans) attempting authentication
So after I upgraded to 10.10 some of my compiz plugins stopped working. Atlantis and anaglyph give me an error like this when I enable them in CCSM (I ran compiz from a terminal to see the output):
I ran a system upgrade today and it froze at "unpacking replacement libpango1-common". It just wouldn't go on. The upgrade kept on showing "unpacking replacement ..", the process used zero CPU time, so I killed it, removed the lock and after Synaptic asked me to, I ran sudo dpkg --configure -a. Now I can't install anything. Everytime I try to, I get an error telling me I should run "sudo apt-get -f install", however, whenever I do that, another endless installation of libpango1.0-common starts. I tried various things like installing that package manually, removing it and so on, but nothing helped. Any advice on how to get my package installation system working again is warmly welcome.
After a recent upgrade I'm now completely unable to log in to my computer. GDM autologin lets me start my computer and enter gnome as before, but su and sudo wont let me access my root account. If I start in single-user mode and try to change my root password with the command passwd I drop back to the shell after entering my current password, no error messages. Same with su and sudo, just drop back to the terminal without error messages. I am running ubuntu jaunty, any idea what's happened?
I had a Linux server with Wheezy, I have 2 internal drive, one for linux OS, the other our Video On Demand drive that must be accessible to Windows and online. (That's why I chose NTFS, with our large video files, FAT will not work, and EXT isn't compatible with windows sharing, and I haven't gotten FTP to work right .
So I upgraded to Jessie today, and everything went smoothly until I tried to access my NTFS drive. (Named WowzaStorage)
I used FSTAB to auto-mount the drive (/dev/sdb1) to /media/ntfs/ on boot. All of this worked swimmingly on Wheezy, but since the update, something got mucked up and I cannot figure it out.
When accessing the mounted NTFS folder in /media/ (if it even shows up) gives me a 'Cannot be found' 'Input/Output error'
When in gParted to examine the drive, I can select it and view all the correct info, but I keep getting "error informing the kernel about modifications to partition /dev/sdb1/ --invalid argument"
Now first I thought maybe the NTFS driver was faulty and I removed 'ntfs-3g' and reinstalled it.
Now when I am in Terminal, after i umount and mount sdb1, I can CD to the drive but not the folders on it... Also using the File Browser, I get errors, and missing folders.
I get "Unhandled error message: Error when getting information for file '/media/ntfs': Input/output error"
Upon upgrading from Karmic to Lucid, Everything comes up, seemingly fine. Once logged in to the OS, my three monitors show the desktop wallpaper as well as all the icons on the desktop. A few programs that I have set to autostart do so.
However for some reason, I can only access one of the three monitors. (And not the one with the gnome-panel.) As soon as I drag my mouse from my third monitor onto the one next to it, I loose complete control of it, and it starts dancing all over the place. If I try to drag a window from one screen to the next (using Alt-Left CLick + drag and not moving the mouse onto the other monitor), the the app goes from one side of the working monitor to the other side (like it's wrapping around). Though I can see it on the other monitor for a little bit until I get it far enough for it to wrap.
I had the Adobe flash plugin working under 09.10 in Firefox; now after the upgrade to 10.04, it doesn't work.When I go to a web page with flash video, I get the message "Some plugins are not installed" and video will not display. I click on the button to install the plugins and select Adobe Flash. I get the message "Package is already installed." I go back to the web page and the same thing happens again.In Ubuntu Software Center I see that package restricted-extras is installed.
I tried going through Tools / Add-ons in Firefox, but the list of add-ons wouldn't load at all that way.I also tried going to Adobe's web site, but for versions of Ubuntu 09 and later it offers an "APT" file instead of a .deb. Firefox asks what application to use to open an "APT" file and I don't know what to tell it... I'd be fine downloading a .deb or using apt-get or Ubuntu Software Center though.
I beleive I had version 9.x installed. I upgraded once and everything was fine. I went the upgrade manager again and it found some more upgrades. The upgrade messed with grub. It then told me there were no new upgrades. Then I rebooted and it says
Try (hd0,0): NTFS5
Then the screen clears and there is some text I can't read and then it says command not found. Then it reboots.
Is there a way to fix this? If not is there a way to recover the files from the disk image file.
i wanted to upgrade my ubuntu system to meerkat beta via update manager like i upgraded it the last 5+ times.
a bug showed up that i can recall from updating files previously: some software installtions via update manager triggered the programm nicotine+ (i think is was something like man-lib or man-db that, when called by the installtion programm, would trigger nicotine too). since i can close that nicotine+-window and the installation process isnt bothered any further i didnt mind.
now with this upgrade, i had to close nicotine+ around 5 times since it got triggered together with some of the files that got updated/installed in this upgrade.
and then what happened: GError something about an "unrecognized image file", it concerned a py file that was named "nicotine"...
so i waited for 10 mins and figured out that the update process had stopped. i couldnt resist and logged out, wanting to delete nicotine from my system and to reinitialize the upgrade. well, nothing works since then, grub only lets me choose different kernels which didnt help much as there was no way to startx.
my question is:
how can i reset this upgrade mess or bring this pending upgrade to an end? can i do an upgrade via network, based on the emergency shell that comes up in some kernel-recoverymodes? or should i burn a livecd, boot it and then do what? repair? try another upgrade? delete nicotine?
having 'consumed' ubuntu for years now i still wouldnt know what else to do then posting here.
I upgraded my ubuntu installation from 10.04 to 10.10, now surround sound (5.1) does not work in xbmc, or in another player such as vlc. Only the front two speakers work. I noticed pulseaudio and alsa are installed. I thought i removed pulseaudio once before but cant really remember. In the sound configuration preferences thing (prefs >> sound), i have hdmi output selected (hdmi goes from the HTPC to the amplifier). It only plays audio in 2.0 instead of 5.1. I tried selecting the analog 5.1 sound option, but none of the test sounds work. However i noticed vlc still played movies with audio, but only stero no 5.1.
Previous to the upgrade, i had 5.1 working fine in xbmc, never bothered to check vlc since it was all good. Also, when i go into alsamixer, it does not show any rear speakers, it just shows a front speaker and a bunch of other stuff, like headphones. I'm not sure what other output you guys need, but let me know and i'll get it. Here is the alsa-info.sh output for my HTPC: [Code]..... Another note, after i reinstalled pulseaudio the first time, vlc fails to display a 5.1 movie and still plays tero output.
I have 4 drives in my system. Two are SATA and configured in a RAID 1. This is my main drive for the system. The other two drives are IDE drives used to bulk temp storage. Before the upgrade my RAID drives were:
/dev/sda /dev/sdb
I'm not sure what the IDE drives were. Now after the upgrade the IDE drives are:
/dev/sda /dev/sdb
and the RAID SATA drives are:
/dev/sdc /dev/sdd
Needless to say on reboot the raid blow up and the system would not boot. I was able to get it working for now by removing the IDE drives. My current mdadm.conf file is as follows:
Now I assume that I could change the devices to the new devices names. However I was hoping for a better way to do this. The IDE drives are only semi permanent. Is there a way to configure mdadm with partition labels like you can in fstab?
