Ubuntu Installation :: 10.04 Server Will Not Boot - Fatal Error
Oct 5, 2010
This box is running 10.04 server, it's been running perfectly for almost 6 weeks. It's only function in life is running MailArchiva which is an ediscovery package, runs very well. Anyhow, yesterday the boss tells me he wants to do something else so the last thing I did was an apt-get update and an apt-get upgrade, no errors were observed, I seem to remember like 8 updates were available, this is what I've normally done in the past to keep it current. The last thing I did after that was shutdown -r now.
This morning I can't get into the box, I reconnected a monitor to it and this is the error I'm getting when it stops after about 9 lines into the boot process;
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.32-24-server/kernel/drivers/crypto/padlock-sha.ko): No such device.
This is a mystery to me, the system is not encrypted. The only stuff that is belongs to MailArchiva. Anyhow someone evidently made off with my install cd so I am downloading another to see if I can repair this but I have no idea what broke.
View 4 Replies
ADVERTISEMENT
Jun 30, 2010
I have server 10.04 running, and I modified my fstab file to automatically mount an NTFS partition on startup, but after a reboot, I see that I clearly did something wrong, as now it will not boot. The output is:
[Code]....
init: ureadahead-other main process (923) terminated with status 4 If this is an error with my changes to the fstab file, is there any way I can access is to change it? No matter what i do I can't get it to boot.
View 1 Replies
View Related
Apr 26, 2011
after I installed graphical ATI drivers for my Ubuntu distribution version 10.10 running on a Acer laptop, it told me to restart and since then I cannot boot GNOME. Whenever I start the laptop, I just get a command prompt with username and password. I can browse through my files using changedir and other commands. After logging in I typed 'startx' and it gave me alot of errors:
Quote:
Fatal server error: AddScreen/ScreenInit failed for driver 0
(WW) fglrx: No matching Device section for instance (BusID PCI : 0@0 : 20 : 4) found
(EE) fglrx: No matching Device section for instance (BusID PCI : 0@0 : 20 : 4) found
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
[code]....
So I really regret downloading these drivers, is there any way to roll back to the old Ubuntu supported video drivers?
View 5 Replies
View Related
Jan 1, 2011
I have this old box that I used at school that I wanted to re-purpose and use. So i decided to that I wanted to run xp, ubuntu studio and slackware so I can learn about linux and do some other things with xp. I think I got through the installatiosa all fine and dandy, and I installed grub for my boot loader, I can boot into studio and xp, but I cant get into slackware. the grub boot menu is sorta funky too, it shows a generic and recovery mode for studio which is fine, and then another option for xp, some memory test boot option, but then for slackware it shows "Slackware Linux (Slackware 13.1.0) (on /dev/sda4) four times in a row. If I select any of them they all end up with some error; the third SW [slackware] option down the list of the repeated 4 allows me to sign into root, but when I type "startx" i get :
(EE) intel(0): No kernel modesetting driver detected
(EE) Screen(s) found, but none have a usable configuration
Fatal server error: no screens found
but thats with a lot of other text above that. if you need any more details, please dont hesitate to request for them. I'm going to take some time and cool down. I'm trying to get these three OSes running from one HD. I've partitioned the 80 gig drive as follows
Primary 40 G NTSF for XP
Primary 2G Linux Swap
Primary 16G Slackware
Primary 18 U Studio
Primary
View 21 Replies
View Related
Jun 10, 2011
I have been following this tutorial [URL]. When I get to the end of the installation and try to install GRUB to the /boot partition I have set up it throws a fatal error at me. No explanation other than it can't write to the specified location. I double checked all the partition settings which were the same as the tutorial then skipped the GRUB installation and finished. The only thing I can think of that might be wrong is that the 250MB partition size specified for /boot in the tutorial is too small.
View 2 Replies
View Related
Jun 13, 2009
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
View 7 Replies
View Related
Nov 15, 2010
I have got xorg and gnome-core installed. When I put in command startx I get the following message: X: warning; process set to priority -1 instead of requested priority 0 Fatal server error:Server is already active for display 0 If this server is no longer running,remove /tmp/.X0-lock and start again. when I try to sudo Xorg -configure it shows me same message server is ..... lspci shows me the following information 04:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)So what I am doing wrong and how do I get this videocard working with Xorg.
View 7 Replies
View Related
Jun 29, 2011
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
View 2 Replies
View Related
Apr 14, 2011
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
View 9 Replies
View Related
Nov 27, 2010
I have VIA/S3G unichrome IGP video card of 32MB after installing fedora i am getting very worst resolution of 600x400which is completely irritating so please provide me a way out from this problem to use fedorathe solutions i followed and failed are given below
1. Some one told me to change the xorg.conf file but i failed because there is no such file in the given location
2. Some one told me to create it using system-config-display but for fedora 14 there is no package for that
3. some one told me again of using the command Xorg -configure but it said as followed [root@localhost tmp]# Xorg -configure
Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again.
[code]....
View 2 Replies
View Related
Nov 19, 2010
that's my first linux server. on my root is CentOS already installed. when i connect via "Remote Desktop Viewer" i log in with my accout.
then i see the textmode and type in "startx" and "init 5" but nothing happens but i can see this:
[root@server004 ~]# startx
xauth: creating new authority file /root/.serverauth.2896
Fatal server error: Server is already active for display 0
If this server is no longer running, remove /tmp/.X0-lock and start again.
Xlib: connection to ":0.0" refused by server
Xlib: Invalid MIT-MAGIC-COOKIE-1 key
giving up.
[code]....
View 1 Replies
View Related
Mar 3, 2010
I am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:
[Code]...
...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.
View 1 Replies
View Related
Mar 22, 2011
Ubuntu 10.10 Whenever I try to boot up now I get a command line environment instead of the normal gnome desktop. The first error message that comes up is: "Screens found,but none have a usable configuration" further down: "Fatal server error: no screens found" Any way I can re-configure so it detects my monitor?
View 9 Replies
View Related
May 31, 2011
I'm using with success NX server and client on Ubuntu 11.04 on both side. Yesterday the server crashed and now the client can't connect to it. The client works well because if I try to connect to an other server it works well and if I try to connect to this server with an other user it works well. So I think that there is a problem with my user. I have tried to solve the problem as explained in the details of the error. Unfortunately there is no file /var/log/messages so I can't search the code of the exception.
Code:
NX> 203 NXSSH running with pid: 3877
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.1.0.60 on port: 22
NX> 202 Authenticating user: nx
[Code]...
View 1 Replies
View Related
Jan 9, 2010
I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.
Resolved the issue of the display, now on to the grub menu.
View 3 Replies
View Related
Feb 11, 2010
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies
View Related
May 7, 2010
I had created a database in mysql called guestbook and created tables also in mysql and also granted remote connections privileges from below command
mysql> grant all privileges on *.* to root@192.168.1.222 identified by "rrcrrc";
i had accessed from my pc(192.168.1.222) and used phprunner to create php web pages and copied the phprunner output folder to use with apache. when i accessed from my pc the below error is coming
Fatal error: Call to undefined function: mysql_connect() in /home/administrator/useridall/include/dbconnection.php on line 9
i can't understand what is going on so i put this question in the forum, below is i am giving the dbconnection.php details.
dbconection.php
<?php
function db_connect()
{
[code]....
View 3 Replies
View Related
Apr 23, 2010
My issue began with my resolution changing to 800x600 in Karmic Koala and then my inability to change it back to anything else. In my haste to fix it before going to work this morning I loaded a new xorg.conf without backing up the old xorg.conf with data not relevant for my monitor and now I'm in limbo. The good news, I hope, is that I also run 8.04 on the same computer so I do have access to what I hope is proper xorg.conf / I've modified the existing xorg.conf file and I'm still getting the "low graphics mode" message (EE) problem parsing the config file and (EE) Error parsing the config file. Fatal Server Error: no screens found.
View 9 Replies
View Related
Jul 9, 2010
I installed fedora 10 on my laptop. But I am getting this error when it is booting up:
Code:
Release Date : 5 November 2008
X Protocol Version 11 , Revision 0
[code]....
View 5 Replies
View Related
Apr 4, 2009
there are several posts related to my problem but not quite what I want. I don't need any effects to be running nor do I need perfect resolution. I have a PCI-E card Nvidia 8600 gts and I need to run redhat 7.1 for reasons that are not debatable. I also have an onboard ati radeon X 1250 but currently I am running the PCI-E.The installation was successful and ran in GUI, however after installation and reboot, the screen keeps flickering trying to load the desktop.I just need to get the GUI running the same way the installer was able to run in GUI, I tried editing the XF86Config file to change the driver to either vesa or vga but still didn't work. Probing for devices is not an option since the card is not listed and the maximum video ram goes up to 64MB in xconfigurator. It probes my card as a VGA generic with 1 MB ram. I know there is a way to have the desktop load just the same as the installer's gui settings but that's where I need help.
this is after changing all the 'driver' values to vesa. I don't understand why it can't find the screen even though I used the horizontal and vert. sync values for my monitor. Any instructions or advice on how to just get the desktop loaded would be great, I know this is a very old OS but regardless I need for it to work.
View 10 Replies
View Related
Mar 28, 2010
Quote:dpkg: unrecoverable fatal error, aborting: failed in buffer_read(fd): files list for package `sysvinit-utils': Input/output errorE: Sub-process /usr/bin/dpkg returned an error code (2)This is the error i get when i try to update my system, fresh install of ubuntu 9.10
View 2 Replies
View Related
Apr 24, 2010
I am having trouble installing the 10.04 RC On my desktop the installer just crashes with a fatal error, before you get to the first screen of the installation process, where you choose to run as live cd or install. On my Laptop i am trying to Install alongside my current 9.10 installation and i keep getting the errors illustrated in the screenies. It is all probably down to my stupidity, but if it is not then this is very worrying 1less than a week before release.
View 8 Replies
View Related
Oct 27, 2010
I have just upgraded from 11.1 to 11.4. When I boot up, I get a command line, but when I do 'startx', I get 'Fatal server error: no screens found'. I have been looking for a solution and tried 'Xorg -configure' but this gives:
Code:
Failed to load /usr/lib/xorg/modules/drivers/vboxvideo_drv.so: undefined symbol: resVgaShared
[code]....
View 6 Replies
View Related
Sep 22, 2010
I have 3 accounts setup on this machine. One is root, one is my own, and one is for my kids. My account and root work fine, but today when I tried to log my kids on, startx fails (it also fails from runlevel4). I have tried creating new accounts and they fail as well. I'm not sure when the issue started, but it's been less than a week I believe. The consistent error which I receive is
Quote:
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config. Fatal server error: Failed to activate core devices.
View 3 Replies
View Related
Apr 3, 2010
I'm trying to run backtrack from a usb drive on my netbook. Upon loading it, i get "Fatal server error: no screens found".
View 1 Replies
View Related
Jun 24, 2011
I just installed Red Hat Linux Professional 8.0 in my VMWare, but I do not know how to start X Windows. I have tried to type "startx" on "RUN", but I get error message: Fatal Server error Server already active for display 0. If this server is no longer running, remove tmp/.X0-lock and start again.
View 1 Replies
View Related
Nov 13, 2010
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
View 5 Replies
View Related
Dec 8, 2010
I had an earlier thread with wrong title and wasn't sure of the problem at the time. Now I have some details after checking all the threads about catalyst so posting a new thread. The problem: In korganizer (or To-Do list in kontact), whenever double-clicking or right-click->Edit.. a To-Do item in the summary list window, it crashes Xorg.
[Code]...
Fatal server error: Caught signal 11 (Segmentation fault). Server aborting I think it has something to do with the amd/ati catalyst driver and korganizer. My video card is XFX Radeon HD5670. I have Fedora 14 x86_64 latest update with xorg 1.9.1-3. I tried catalyst 10.9, 10.10, 10.11, and kernel 2.6.35.6-45.fc14.x86_64, 2.6.35.6-48.fc14.x86_64, 2.6.35.9-64.fc14.x86_64. Same problem.
If I use vesa driver, or from another PC with proprietary nvidia driver, no problem. Open source radeon driver works ok but sometimes the display turns off and I can't get back the display. And I need 3D. I scoured through the forum and followed the instructions exactly:
[code]...
View 1 Replies
View Related
Jun 28, 2009
Sometimes during bootup I get the following error:Starting Dovecot Imap: Fatal: listen(995) failed: Address already in useI tried to figure out what I could with the command lsof -i :995 and this was my output:COMMAND PID USER FD TYPE DEVICE SIZE NODE NAMErpc.mount 2936 root 7u IPv4 9201 TCP *:pop3s (LISTEN)When the system boots without the dovecot error the output of losof -i :995 is as follows:
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
dovecot 3079 root 8u IPv6 9419 TCP *:pop3s (LISTEN)
pop3-logi 3157 dovecot 1u IPv6 9419 TCP *:pop3s (LISTEN)
[code]....
View 2 Replies
View Related
Sep 9, 2010
I was just mucking about in xfce, trying out new window buttons in conjunction with the black theme - dusk?? - when POW! - X shut down. Rebooting didn't restore things. Error is along these lines:
xfce4-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0. xfwm4: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.0.
[Code]....
Is there a config file I can edit to get away from the window button setting it dislikes, or is reinstalling xfce the only option?
View 2 Replies
View Related
