Fedora Installation :: Kde 35 Seconds Lag On Preupgraded F12
Nov 21, 2009
I 've just upgraded from f11 to f12 via preupgrade everything went fine, i corrected the rpms in package-cleanup --orphans and i have nothing in --problems and --dupes
The problem is with kde, i get a ~35 sec lag (screen completely frozen, mouse moving but ineffective, keyboard shortcut like ctrl-c, ctrl-alt-backspace and ctrl-alt-fn executed only after the lag) when: starting kde (read below) closing kde (35 secs between the kde close sound and the beginning of any real shutdown) starting programs like: krunner, lancelot, konsole, gnome-terminal, kickoff it does not happen when running most programs, like opera, firefox, gedit, even xterm it does not happen in a gnome-session
Running krunner gives a dbus error message:
So i thought maybe it was a dbus timeout so i tried setting a lower timeout in session.conf and system.conf, but it doesnt change anything xcept kde startup: with the lower timeouts, the kde load screen takes less time, i see the desktop but then it hangs for 35 secs before loading programs and plasmoids with the standard dbus config, the kde load screen takes 35 secs more but then the desktop loads right.
I have Dell Vostro laptop with Core2 processor 1.8 GHz, 2 GB RAM. I want to install Fedora. I tried to install it with Fedora_14_ 32 bit and Fedora_14_ 64 bit. After booting by DVD or USB, I get initial blue screen in which I select Install and it starts for few seconds and freezes there, it does not move ahead. I got Fedora 32 bit DVD from Fedora so it should have come with checksum checked. So IMO DVD is ok, it is something else with regard to hardware detection, stopping installation to go ahead. I tried 3 times, but do not go ahead.
i could manage to install fedora 12 on my laptop (asus f6a) using the iommu=off option, but when i try to boot it i just reboot without even seeing the fedora logo, i just see the the prompt for 5 seconds and then it reboots.
I have Fedora 12(Constantine) i686 installed on my PC as my O.S. i got a porblem that when i was trying to install the a bundle(NetBeans IDE 6.8 with JDK 6 update 20) after sometime my PC restarted itself due to electricity problem. When it was started i saw the icon of NetBeans IDE 6.8, then I tried to open it, but all in vain. A screen opens for a few seconds and then it disappears. I think it is the problem of improper installation. And now I m totally unable to uninstall that bundle.
i have created a shortcut for konsole on desktop, if i click on icon all desktop is freezing for 10-15 seconds before konsole is launched. if i have the same aplication overlapped in taskbar and i click once same thing is happening, desktop is freezing before select menu is appear.
Im trying to install Fedora 10 on to my HP Pavilion a340a (full product specifications: [url] ), i boot from the cd and it says "Automatic boot in 10 seconds..." etc, i get past that screen and am then at a screen with 2 shades of blue and a white bar moving at the bottem of the screen towards the words "Fedora 10", on the next screen, the log on screen, all the text is jumbled up and distorted, and everything appears frozen, except that i can move the mouse. I am not sure what the problem is but i know its not the cd because after having problems with hp pc i decided to try it on my Acer Extensa 2300 laptop (1.5ghz, 1.2gb ram, 40gb hdd, 32mb intel integrated graphics) and that installed fine, without a problem. This has led me to beleive that Fedora may not be liking the intel graphics on my HP Pavilion, and i dont know why. i really want to use Fedora 10 on my desktop. I should mention that i want to dual boot Windows XP and Fedora 10 on Pavilion, windows is already installed.
I was trying to recall a terminal command and accidentally hit enter to a previously issued "shred." /dev/sdc was now attached to a drive I DID NOT want shredded, and I quickly realized the error and pulled the power to the machine. Unfortunately, shred issued long enough (~1.5 seconds) before I had the machine powered off. I KNOW the data on my 2TB drive is still there. All that was corrupted was a very tiny piece of the drive. I had 2 partitions in the following order: 750gb and ~1Tb. My question is, will standard disk recovery options like testdisk be able to recover the majority of my data?
I have managed to install Ubuntu 9.10 on my pc I have Vista installed on one hard drive and ubuntu on another. When I boot up on Ubuntu, the desktop comes up, then after about 30 seconds the pc freezes.
[I'm not sure if this is the right forum. This is the closest I've found]. I've installed Ubuntu 10.04 LTS (dual boot with Windows XP SP3). After Ubuntu starts, it takes about 10 seconds, and the computer halts. No screen/mouse/keyboard activity. If I start Ubuntu under Recovery Mode, with failsafeX, it doesn't happen.
In the Windows all is fine. What did I wrong? [My CPU is: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz, if it matters...]
I've just installed new Debian 8 from live CD, lxed. The problem is urgent, I cannot do anything on my laptop, the computer keeps on suspending/hibernating every 30 seconds or so.
I have just upgraded to the latest testing packages with aptitude and now when I log in I get 2 error messages. One is "Your session only lasted less than 10 seconds. If you have not logged out yourself, this could mean that there is some installation problem or that you may be out of diskspace. Try logging in with one of the failsafe sessions to see if you can fix this problem." and then if I click on view details I get "/etc/gdm/Xsession: Beginning session setup..." As long if I don't click OK the system (LXDE) is completely usable and the only thing that doesn't seem to be working properly is wifi - I think I was using network manager which doesn't seem to be loading. The other error message is: "GTK+ icon theme is not properly set This usually means you don't have an XSETTINGS manager running. Desktop environment like GNOME or XFCE automatically execute their XSETTING managers like gnome-settings-daemon or xfce-mcs-manager.
If you don't use these desktop environments, you have two choices:
1. run an XSETTINGS manager, or
2. simply specify an icon theme in ~/.gtkrc-2.0.
For example to use the Tango icon theme add a line: gtk-icon-theme-name="Tango" in your ~/.gtkrc-2.0. (create it if no such file)
NOTICE: The icon theme you choose should be compatible with GNOME, or the file icons cannot be displayed correctly. Due to the differences in icon naming of GNOME and KDE, KDE themes cannot be used. Currently there is no standard for this, but it will be solved by freedesktop.org in the future." clicking OK brings up icons etc. and desktop background. I am using an SSD and when I set up the laptop I think that I made /tmp a folder on a ram disk (and maybe a few other temporary files as well). Could this have anything to do with these error messages? (one also pops up about battery empty when the battery is still @ 100% but that is less irritating)
Problem: Ubuntu freezes up 30 seconds or so after a successful login.
Background:I am running a Compaq Presario SR5030NX. It has had issues for a while with running Ubuntu properly. My computer suffers from this bug. I have managed to get the LiveCD running by adding the following to my boot parameters:
Code: vga=792 i915.modeset=0 When I was running the LiveCD I found that it would freeze after about 30 seconds. I solved this problem by again changing the boot options. This time I:Press F6 Check noapic, nolapic, and pci=noacpi
I then proceeded to install Ubuntu.
My problem arose when Ubuntu did not modify grub.cfg to match the setting I needed in order to boot. I managed to modify in some of the settings correctly, I believe at least, but not all of them.
In its current state Ubuntu is able to boot, but freezes 30 seconds or so after a successful login. If I do not graphically login, I do still have access to VTY1-6. The machine does not freeze until a successful graphical login has been made.
Below is the relevant section of my grub.cfg:
Code: menuentry "Ubuntu, Linux 2.6.31-14-generic" { recordfail=1 if [ -n ${have_grubenv} ]; then save_env recordfail; fi set quiet=1 insmod ext2 set root=(hd0,2) code....
On another note: The liveCD I have been running for 6 months is BackTrack 3 Final. Which does not have this issue at all. I would wager a guess that BackTrack 4 does though as it is based off Ubuntu instead of Slax.
I know this isnt normal for everyone but im getting a 29 to 30 second bootup on 10.04 from grub to login screen.. i installed boot up manager and disabled some of the things listed on a few recommendation pages on google where would i begin to figure this out? before i upgraded i was booting up at like 10 seconds tops..
I am installing Ubuntu for the first time as a result of my Programming teacher starting me on a webserver project that will not work on windows. I dug up an older Dell, about 5 years old, and I keep getting install errors Just under halfway through. The OS will completely freeze for a few minutes then say 'errno 5'.
I'm having a buggy problem with rythmbox under F14. Sometimes when I start playing a audio cd or mp3 file Rythmbox will play about 2 seconds of the file then pause playback. When this happens it wont let me restart playback. I have to shutdown Rythmbox and restart it and try again.
I have all the latest updates, running on a Dell Latitude D510 laptop.
I've been using Thunderbird 3.0.x for some time and found in it a good replacement of TheBat. However, few days ago, ubuntu being ubuntu crashed and since then, Thunderbird freezes after 10 seconds every time I try to start it, sending CPU usage through the roof. I have 8 imap accounts in it and my profile folder is ~2.8gb I tried purging the installation. I tried fsck on all partitions. Windows Thunderbird using the same profile folder works just fine.
Yesterday I upgraded to ubuntu 11.4 and since then firefox (4) doesn't get beyond starting and showing for maybe three seconds. Then it crashes and Mozilla Crash Reporter tells me mozilla are sorry
The system runs just fine then all of a sudden it "freezes". For example an input box doesn't respond nor can I scroll down the page. But when the system comes out of the freeze 5-15 seconds later, it suddenly does all the input that was used during the freeze. The scroll and letters suddenly show up. I don't loose mouse control and I can do some other system functions but not all of them.
Here are some various system info's [osprey@host ~]$ uname -a Linux host.tranquilpenguin.com 2.6.27.25-170.2.72.fc10.i686 #1 SMP Sun Jun 21 19:03:24 EDT 2009 i686 athlon i386 GNU/Linux [osprey@host ~]$ firefox -v Mozilla Firefox 3.0.11, Copyright (c) 1998 - 2009 mozilla.org [osprey@host ~]$ df .....
I have been enjoying Fedora 11 for sometime, and decided to try Fedora 12. All in all it is working, but the boot sequence seemed much slower. I decided to use bootchart to examine the boot process on my old F11 and new F12 installations. The result show F11 booting in ~34 seconds, and F12 booting in ~57 seconds. Interestingly, the first 30 seconds show that only kthreadd, khelper, and ata/0 are running. CPU and disk utilization are both zero during this 30 seconds span, then all of a sudden everything starts loading, CPU and Disk utilization spike up, and ~23 seconds later I get to the login screen. I sent an email to Harald Hoyer about this, and to my surprise he was kind enough to respond. He suggested I check the BIOS to make sure I had disabled the floppy drive, which I did. The problem persists, so I was wondering if anyone here was having a similar issue and if so how they have dealt with it. I have blacklisted the floppy module (just to make sure)
I used LILI to create a live USB key - I believe I used the 686MB version. Everything worked fine. I wanted to try the full DVD install, so I did the same with that image.
Now, it doesn't matter if I load it in virtualbox or if I boot up my comp with the USB stick, I get to the Linux boot menu, choose "Persistent Mode", and then below it shows "Automatic boot in 10 Seconds..."
Once it counts down to 0 it just resets to 10, and keeps on counting!
Some days ago I switched from Ubuntu to Fedora and it is just great, Gnome 3 looks awesome. I waited for the installation of Fedora until I got my new OCZ Vertex 2 SSD and the first benchmarks were astonishing. The SSD has an average Read/Write speed of ca. 270Mb/s. Well, now I installed Fedora 15 and I was expecting a boot time of less than 20 seconds, but in fact it takes 30 seconds. By way of comparison, Ubuntu takes on my old HDD about 27 seconds, so a bit less than it takes on the SSD.
Then I tested some software, I started Eclipse and compared the start time on Ubuntu (HDD) and on Fedora (SDD). Starting Eclipse from the HDD took about 6 seconds while starting from the SSD took about 7 seconds. The differences in the results are not big, but taking into account that the SSD is at least twice as fast as the HDD the results are really strange. Now I would like to ask you how I may increase the performance of Fedora on my SSD?
Some notes about my hardware: Intel Core2Duo 3GHz 4GB Ram Sata2 On this screenshots you can see both drives in comparison, the ssd is much faster.
I just installed Fedora 12 on my pc and a few seconds after i boot the system, it crashes. Everything stops working.The keybord and the screen don't respond. I can move only my mouse
I'm out in a village and we get more powercuts than I like, and recovering the journal on my server is getting rather irritating. I'm looking into getting a cheap UPS, the powercuts will last usually a maximum of 30 seconds, so I only need a few minutes.
I've been looking at:Plexus V 500VA UPS Plexus V 1200VA UPS APC SUA750I Smart-UPS 750VA
I know near to nothing about these things, my question is will those work with a machine with a 700W PSU? How do you know? The 500VA doesn't really mean much to me. Ideally I'd like to get my desktop on there too, but that's more for convenience than anything.
Will any of these do the job? Any Linux compatibility issues I should plan for? Any recommendations from personal experience is greatly welcome Edit: I will be happy with a UPS that can inform Linux power is down, and get the server to cleanly shutdown straight away, I'm more interested in a clean shutdown than maintaining power to use the machines during the outage. Edit 2: Can UPS devices be piggybacked to one another to provide extra uptime? i.e. Could I run 2 of the 30's so when the first runs down, the 2nd carries on?
Have NO video camera. Trying to receive SKYPE video using Fedora 11 & SKYPE Beta Version 2.1.0.81 [latest version].When I receive a video call the image appears and then freezes and dumps the call after about six seconds.I have tried the 'env LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so /usr/bin/skype' launch, but it makes no difference in the bug.I have NOT heard that a camera is required to receive video.Is there a fix for this?nal information: Here is the error message I get when the call dumps and crashes SKYPE.
[thsk@galley ~]$ env LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so /usr/bin/skype shm_open() failed: No such file or directory Assertion 'b' failed at pulsecore/memblock.c:439, function pa_memblock_acquire(). Aborting.
I am using Opera 10.60 browser for the past one month. Generally it use to take about 20 seconds to startup but since yesterday its taking more than 40. I don't know about the exact duration but certainly its taking a lot of time now.
I'm having a few problems with flash objects in Firefox. When I load a page with flash - ..... for example - the flash object is just a grey box and firefox hangs for 30 seconds or so. When firefox finally responds again all that's left of the flash object is a black box. Does anybody know what the problem is? And even better - what I can do to fix it!
For background info - flash was working fine in F12 before I updated to F13. Used the install DVD for F13 to perform the update. I'm running F13 64bit with KDE, Firefox is showing Shockwave Flash in the addons list. Originally installed the flash plugin using the instructions from mjm wired:
Code: [mirandam@charon Download]$ sudo yum install nspluginwrapper.{i686,x86_64} alsa-plugins-pulseaudio.i686 [mirandam@charon Download]$ sudo yum install flash-plugin I've tried removing those packages and reinstalling but no luck.
Is there a way for the time at the top of the screen to display seconds as well as the date ?
My clock seems to be about :40 seconds off... before i upgraded from f-13 i had my time controlled by ntp(how to verify ntp is enabled) ? even with network time = yes, it seems to lag a little.
I figured out the network time. it is under a whole separate menu for some reason.
Is there a way to get weather/ temperature like in classic gnome ?
Rite now my clock reads: tue 3:50 pm...Is there a way i can make it read: tue, aug 20, 2011 3:50:45 pm
