I am installing Ubuntu for the first time as a result of my Programming teacher starting me on a webserver project that will not work on windows. I dug up an older Dell, about 5 years old, and I keep getting install errors Just under halfway through. The OS will completely freeze for a few minutes then say 'errno 5'.
View 7 RepliesI have managed to install Ubuntu 9.10 on my pc I have Vista installed on one hard drive and ubuntu on another. When I boot up on Ubuntu, the desktop comes up, then after about 30 seconds the pc freezes.
View 2 Replies View RelatedProblem: Ubuntu freezes up 30 seconds or so after a successful login.
Background:I am running a Compaq Presario SR5030NX. It has had issues for a while with running Ubuntu properly. My computer suffers from this bug. I have managed to get the LiveCD running by adding the following to my boot parameters:
Code:
vga=792 i915.modeset=0
When I was running the LiveCD I found that it would freeze after about 30 seconds. I solved this problem by again changing the boot options. This time I:Press F6
Check noapic, nolapic, and pci=noacpi
I then proceeded to install Ubuntu.
My problem arose when Ubuntu did not modify grub.cfg to match the setting I needed in order to boot. I managed to modify in some of the settings correctly, I believe at least, but not all of them.
In its current state Ubuntu is able to boot, but freezes 30 seconds or so after a successful login. If I do not graphically login, I do still have access to VTY1-6. The machine does not freeze until a successful graphical login has been made.
Below is the relevant section of my grub.cfg:
Code:
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,2)
code....
On another note:
The liveCD I have been running for 6 months is BackTrack 3 Final. Which does not have this issue at all. I would wager a guess that BackTrack 4 does though as it is based off Ubuntu instead of Slax.
I've been using Thunderbird 3.0.x for some time and found in it a good replacement of TheBat. However, few days ago, ubuntu being ubuntu crashed and since then, Thunderbird freezes after 10 seconds every time I try to start it, sending CPU usage through the roof. I have 8 imap accounts in it and my profile folder is ~2.8gb I tried purging the installation. I tried fsck on all partitions. Windows Thunderbird using the same profile folder works just fine.
View 6 Replies View RelatedI have Dell Vostro laptop with Core2 processor 1.8 GHz, 2 GB RAM. I want to install Fedora. I tried to install it with Fedora_14_ 32 bit and Fedora_14_ 64 bit. After booting by DVD or USB, I get initial blue screen in which I select Install and it starts for few seconds and freezes there, it does not move ahead. I got Fedora 32 bit DVD from Fedora so it should have come with checksum checked. So IMO DVD is ok, it is something else with regard to hardware detection, stopping installation to go ahead. I tried 3 times, but do not go ahead.
View 4 Replies View RelatedI decided to install ubuntu again and downloaded 10.04. I had some issues installing with the desktop version, but everything installed fine with the alternate version.Now if I want to log in (on the KDE login-screen) the KDE-loading-symbols show up just as they are supposed to do, the desktop shows up (I can see "Desktop Folder and uBlog) and suddenly the mouse/system freezes. Neither Ctrl-Alt-Del isn't working nor Ctrl-Alt-F2 gives any response, all I can do is to reset my computer.
When I use Gnome as a desktop enviroment the computer totally freezes at the login-screen, without giving me any chance of logging in. Things I already tried: noapic, nomodeset, noacpi settings when booting, I successfully installed the latest ATI-Driver for my 3870, I disabled compiz.The kdm log says that there's some problem with an i-bus-daemon. Disabling/restarting the daemon has no effect on the behavior of my installation.
I recently installed Ubuntu on my spare comp.
It freezes after about 10 seconds after logging in. I don't know why this happens.
It's a Dell Dimensions 4100. Installation went fine. I did everything, didn't skip any checks. It finished normally.
And now my hopes of another working computer have gone down the drains.
I just installed OpenSUSE 11.4 - fresh install (no upgrade). However with 11.4 there is a very annoying bug (actually, two of them, but I'll post the other one to a different thread): every few seconds (10 or 15) the system 'freezes' for a split second. anything that is going on (visible) freezes for half a second or so. If you're in the process of moving the mouse, the pointer will stop dead in its tracks for that half second, and then when it resumes (a half-second later) it picks up from where "it would have been" had there not been a freeze (it will jump from one position on the screen to the next, as per the actual movement of the mouse. If I have a window (a terminal window for example) that is scrolling output, the scrolling will stop for the same half-second. I did a quick monitor with 'top' refreshing every tenth of a second, and when this freezing occurs is *seems* to coincide with spikes in the kernel thread 'kworker'. I have a hunch that this *may* be due to new built-in NVIDIA drivers that are in 11.4 that I wasn't using in 11.2 (where I compiled the driver from scratch) as I have seen a few posts about issues with this and the 'nouveau' driver - this is just a hunch. Not that dmesg also reports this log quite frequently:
[code]...
This is a FAST system (3 GHz and four cores) that is otherwise running IDLE, other than logging into KDE. So it's not a case of high CPU usage or I/O usage. The video card is: VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2). I have installed a basic KDE 64-bit distribution, using NO proprietary repositories - it's essentially and "out-of-the-box" install.
I am on ubuntu 11.04 and have had it since 10.10. For some reason when I am working on something whether it be on internet or listening to music after about 45 minutes of working ubuntu completely freezes and I cant do anything. Can someone please help me I really love ubuntu I just dont no any code so I tried researching the subject but dont understand the lingo and code.
View 4 Replies View RelatedMy problem is this: the video that I receive during a video call will freeze after about 30 to 60 seconds. Before that, it works fine. And the outgoing video (that which I send to the contact on the other end of the call) is fine throughout.
If my contact resets their video by turning it off and then on again during the call, it will usually work again for a few seconds. Then, as always, it freezes.
So, I am clearly receiving the signal. But maybe I am overloading something? Is this a graphics card problem?
SPECS:
* Mobile Intel 915GM Express card
* IBM Lenovo X41 laptop
* Intel Centrino processor
* Ubuntu 9.10 (Karmic)
* Skype 2.1.0.47(Beta)
Firefox grays out and doesn't unfreeze until the entire upload is complete.I can't do anything else on the internet while this is happening.This didn't bother me until now, because I need to upload some pretty high quality pictures to Flickr, and it takes about fifteen or twenty minutes to do so.I'd like if the pictures could simply upload in the background while I do other stuff, instead of completely freezing my internet usage in the process.I don't have a problem downloading files quietly in the background not even large files so why can't I upload files without freezing everything up? Is this normal, or is there a fix for this?
View 5 Replies View RelatedI have installed ubuntu server 10.04 LTS on my NAS (Thecus N5200 Pro). It runs in much points better than the original firmware (I can do a lot of things more). But I have also 2 problems remaining with configuring my NAS
1. Ubuntu freezes completely when I copy big files over smb. I first thougth it is an overheating problem, but it don't seems so.
2. My raid (raidd 5) resyncs very often. The problem is that the NAS isn't on 24/7. It is only on when I need it.
Very annoying problem, just build a new PC, new 500GB HDD and:
AMD Processeur Phenom II X4 955 Black Edition 3.2 GHz - 125W
GSkill RipJawsX 4Go DDR3 C9 1600Mhz
Carte m�re socket AM3 - Chipset AMD 880G & SB710
Installed ubuntu 11.04, and now extremely randomely, it freezes completely, cannot get to a console, ie CTRL+ALT+F1, ALT+F2, the mouse do not even move. I have to turn it off and restart. It may not happen for a whole day as it can happen 2 or three times in a row. From what I have gathered, it only happens when I use the PC as I can't remember coming to the PC and finding it frozen. From searching the forum, some people seems to have problem because of the 4 cores of the phenom, but it was very vague.
How can I know better what is happening and how to fix it. I have so little time, I really would love to avoid re-isntalling the whole thing again, as it is properly setup at last.
The system runs just fine then all of a sudden it "freezes". For example an input box doesn't respond nor can I scroll down the page. But when the system comes out of the freeze 5-15 seconds later, it suddenly does all the input that was used during the freeze. The scroll and letters suddenly show up. I don't loose mouse control and I can do some other system functions but not all of them.
Here are some various system info's
[osprey@host ~]$ uname -a
Linux host.tranquilpenguin.com 2.6.27.25-170.2.72.fc10.i686 #1 SMP Sun Jun 21 19:03:24 EDT 2009 i686 athlon i386 GNU/Linux
[osprey@host ~]$ firefox -v
Mozilla Firefox 3.0.11, Copyright (c) 1998 - 2009 mozilla.org
[osprey@host ~]$ df .....
Every time I launch Firefox and go visiting some websites, I notice it freezes for about 10 seconds. Not always in the same websites, but it always happens sometime in the first 2 or 3 minutes of running. I can see the hard disk led is ON all the time the browser is hung.
My operating system is Linux and I don't currently have any extension/plugin installed here.
I have no form completion, no history and have no more than 20-30 bookmarks.
Has somebody noticed something similar, or know how can I debug this to find out what Firefox is doing or trying to do?
Well i've been having a problem that my computer randomly completely freezes. A while ago, it happened again, but i wasnt able to log back in anymore, getting this screen when gdm tries to load URL...
View 5 Replies View RelatedI have a very fresh and basic install of the weekly jessie build (this week). I've installed nvidia drivers, some non-free plugins, virtualbox, basic system tools, etc. The issue is while playing in audacious, the song will freeze for about 5 seconds. It's always around 5 seconds. Sometimes it's once or twice per song, sometimes I'll play 10 songs without it happening. BTW, all music is on a separate hard drive on an NTFS partition.
In audacious, I'm using the Winamp skin. I noticed when trying to play for the first time, it wouldn't play unless I changed the setting in audacious to use ALSA. That was the only way I could go to Settings and select my SPDIF digital output. But then doing that, other sounds no longer worked (in iceweasel). So I downloaded pavu, was able to select my onboard digital stereo output, set audacious back to pulse audio, and everything now works. Only issue is audacious is freezing every now and then... Is there a driver or module that I need to check for? Is there a way to get everything to use ALSA?
I once tried AV Linux for the low latency kernel but since it was based on Wheezy and I wasn't familiar with repos, everything was extremely outdated, so I migrated away. Should I need an LL kernel for 320kbps audio playback? I haven't sat and watched a full mkv yet, some of those have 1.5mpbs audio.
I have this problem on my workstation. The computer would effectively freeze for 2-5 seconds for no apparent reason, then continue as normal. While frozen the mouse would still be movable, but only on one of screens in my multi-screen setup. What can be the likely cause.
System:
CPU: i7-920
Memory: 12G of Patriot DDR3, 6 modules
OS: SLED 11, Suse Linux Enterprise Desktop, using Gnome
Main board: Asus P6T
Video: two Nvidia 9500GT connected to three displays
I am using memory at recommended settings of 8-8-8-1333. It has an XMP profile. Th CPU is a bit overclocked to 3.3 GHz, but my cooling more than allows for it. I ran the computer with all overclocks off and lower memory speed but the issue was still there.
I have installed CentOS 5.6 guest in vmware. This machine has host-only networking. I would like to install vmware-tools, which requires that gcc be installed. (As vmware tools is not yet configured, I cannot copy paste the error. So I am typing it out). As gcc has dependancies, I thought of configuring a local yum repository via http. http is already up and running fine.These are the steps I did:
I mounted the iso as loopback in /mnt/cdrom.
cd /var/www/html
mkdir -p yum/base-pkg
/var/www/html/yum/base-pkg is where all the rpm's going to be served via http will be present. I am changing the ownership of /var/www/html/yum/base-pkg to apache:apache, though not sure if this step is required.
chown -R apache:apache /var/www/html/yum/base-pkg
Now, cd /mnt/cdrom
ls CentOS | wc -l
shows 2684
I am copying these 2684 packages as follows:
cp -avr CentOS/* /var/www/html/yum/base-pkg
I am also copying the directory "repodata" as follows:
cp -R repodata/* /var/www/html/yum/base-pkg
Now, cd /etc/yum.repos.d
ls shows the following files:
CentOS-Base.repo
CentOS-Debuginfo.repo
CentOS-Media.repo
CentOS-Vault.repo
I am renaming the .repo directories to something else. I hope this will ensure that yum will not look into the default repositories, rather will look only into my custom repository file.
for i in $(ls); do mv $i $i.org; done
Now I am creating my repository file named mylocal.repo (in /etc/yum.repos.d)
touch mylocal.repo
vi mylocal.repo
[base-local]
name=Centos $releasever - $basearch
[code].....
I recently bought a IOgear USB bluetooth adapter and a Sony DRBT101/BLK bluetooth headphones to use with my computer.Whenever I try to make a call using these headphones with skype, I can speak for say 10 seconds and then the headset disconnects completely from the system. I then have to reconnect the headset by switching it off and on. I do not have this problem listening to music using A2DP. It works fine with my mobile phone.When I change the profile to Telephony Duplex (HSP/HFP), it shows up as hands free, I thought it should be headset in blueman manager. My friend uses Plantronics headset with is Dell laptop with built in bluetooth and he says his comes up as headset not hands free. Could this be causing the problem?
View 1 Replies View Relatedwhen Gnome starts my Desktop completely freezes. So I decided to reinstall and install Gnome2. When Debian is freshly installed I still need to configure and install my ATI 6950 Graphic card and the X config. Since the latest drivers from ATI I can use the --initial config from ATI. This all seems to work. But also when I use Gnome2 my screen completely freezes. I don't see any special things in my logs. I do remember that with my previous PC I had the same problem. This was the "first" reason why I left Debian for my desktop.
View 1 Replies View RelatedSo i just finally installed Debian Jessie OS, replacing Ubuntu. But now it is running extremely slow. It's not internet connection. The internet speed is running fine (Videos load quickly), but it's like the system freezes every 30 seconds or so. A video can be fully loaded but still stops and starts constantly. Just browsing the internet, or non-internet things do the same also. I switched back to Ubuntu to see if it was different on there, but Ubuntu is running fine.
View 4 Replies View RelatedSometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.
If I try it again, it crashes at the same point.
I have an Acer Aspire One Netbook, and I have the Ubuntu 9.10 Netbook Remix installed. I have tried using Cheese to capture video and it captures maybe 2 seconds of movement, then goes black and/or the image freezes. I can take photos just fine, but video capture seems to be impossible. Any help?
View 2 Replies View RelatedI am having a problem with my Fedora11, I am not sure wether it is software or hardware but this looks serious. My computer is running very slow and freezes up every few seconds. Every time I reboot I would get a kernel failure pop-up.
This is what the message says:
Kernel failure message 1:
Kernel failure message 2:
Call Trace:
I'm running 11.3, 64bit.It downloads everything fine, but not long after it starts installing things, my PC completely freezes. I tried giving it 20 minutes, but it didn't seem to want to come back to me.What does this mean? Is my OpenSUSE broken?
View 3 Replies View RelatedI've been experiencing a problem when I try to install Ubuntu 10.10 and 11.04 on my girlfriend's notebook. In the middle of the installation process a window pops-up saying "[Errno 5] input/output error". This has happened with both versions and I can't get through it, no matter what.
View 5 Replies View RelatedI am stumped. I get random "freezes" for like 20 seconds, then back to normal. Then again the same thing randomly. I thought it was my hard drive...replaced it, reinstalled 9.10 and same issue. Thought it might be the memory...nope!, thought it might be my motherboard, tried to update my bios and it froze and now I can't get in to my bios at all. I bought a new motherboard and did a fresh install of 9.10 and same problem!!! I took my hard drive out and put it in another computer and it ran the same ruling out hardware issues all together.
View 7 Replies View RelatedI am installing Ubuntu 9.04 Desktop on my system. using entire disk. my disk is new one. first time i installed ubuntu on it successfully, used it and installed new kernel and some upgrades. all were successful.but on installing some drivers, its files system corrupted. so I had the need to re-install the OS again. NOW , when i am installing the OS, it gives error "(Errno 30] Read only filesystem" explaining that either CD/DVD is corrupt or HDD is corrupt. temperature of the environment may be high. I changed the system , ehanged the environment, moved to some cool place, changed CD drive and CD (after making new one from ISO), changed the HDD but all useless, error is there,
while installation is in progress my sda1 is mount on /target. when i see fstab, here in the line of /dev/sda1 ,error=remount-ro is observed. sometime installation gives error no 5 sometimes it gives error no 30 but both the errors convey almost same message explaining that either HDD is corrupt or CD. As i have explained that I changed every thing including HDD and CD but the error is same.
Asus EEEPC 1215P
Intel Atom N550 1.5 GHz
2 GB DDR3
Ubuntu 10.10
Maverick Meerkat
Desktop Edition
Tried changing BIOS setting...
SATA Run Mode configuration
Enhanced AHCI
Enhanced IDE
Compatibility
Disabled
non of them worked