Red Hat / Fedora :: Improper Installation - A Screen Opens For A Few Seconds And Then It Disappears
May 28, 2010
I have Fedora 12(Constantine) i686 installed on my PC as my O.S. i got a porblem that when i was trying to install the a bundle(NetBeans IDE 6.8 with JDK 6 update 20) after sometime my PC restarted itself due to electricity problem. When it was started i saw the icon of NetBeans IDE 6.8, then I tried to open it, but all in vain. A screen opens for a few seconds and then it disappears. I think it is the problem of improper installation. And now I m totally unable to uninstall that bundle.
View 5 Replies
ADVERTISEMENT
Oct 13, 2010
I used the search feature first to try and find the same issue, and found nothing that truly matches what I'm experiencing.
Here's the current issue:
I'm supposed to run this dbgl file (front end for dosbox) in terminal like the tutorial i'm viewing says, but everytime i click "Run in Terminal", the Terminal shows up for a split-second and then disappears. Nothing else shows up. Nothing else opens.
View 9 Replies
View Related
Jun 28, 2015
After new installation i can not get USB to work properly, if i insert a usb stick it will not show only if i change ports several times it will show, and will be invisible in dev/tty
View 3 Replies
View Related
Dec 28, 2009
I have just upgraded the hard drive in my laptop with a new one that isn't about to crash (I dropped the laptop a few months back). After installing Fedora 12, the first thing I did was try to install kmod-nvidia and all its dependencies. Upon rebooting Fedora goes to the boot splash, and then when the login screen should display it instead shows a blank black terminal like screen. Do diagnose this I logged in under terminal (tty3) and proceeded to try to start X manually. It displayed an error to the effect of 'could not load Nvidia kernel module Nvidia_module.so3'. I figured it must have been a glitch so I reinstalled kmod and the same thing happened. Tried reinstalling Fedora all together and still the same result. I am getting kmod from the RPM Fusion repo
View 3 Replies
View Related
Jun 25, 2010
I recently downloaded openSUSE (gnome) from the main site. I used ImgBurner to put it on a cd and boot it. After I double click the installation on the desktop, it opens then closes after like 30 seconds. I dont know if the ImgBurner did not burn it on the disk properly, or if my computer is just retarded.
View 9 Replies
View Related
Dec 29, 2010
This is what I do:
*connect my ipod
*it appears on nautilus
*as fast as possible i run "ideviceinfo" and it shows my device no problem
*then the ipod sounds as if it was disconnected and disappears from the computer
*when i try lsusb it shows an apple inc. device
*then i try to mount it using ifuse but it doesnt work, it asks me if me device is connected, and it is
I made another user, and tried connecting it and it was completely normal, it wouldn't dismount.It's like I had something not configured right or something, because one week ago it was working right
View 1 Replies
View Related
Jan 27, 2010
Don't know what is going on here, but Evolution won't start. I've tried reinstalling. When I click the icon to open it, the little loading cursor displays for a few seconds then it disappears and nothing else happens.
View 9 Replies
View Related
Mar 7, 2011
This problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.
When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:
[Code]....
View 1 Replies
View Related
Jul 15, 2010
I'm running 12, not 11. I don't know why I had 11 in my head. Can this be moved BACK from EOL? If not, I'll start a new thread. Sorry. My wife and I have matching HP EliteBook 8730w "mobile workstations" (laptops that need a donkey to move them). We also have matching LG second screens. Unfortunately, we have matching mouse pointer issues too, as you might expect.
99% of the time we work away without issue. 1% of the time, Fedora suddenly stops showing the mouse pointer in the separate LG screen. The pointer is there, you can use it (if you can guess where the hell it is!) but you can't see it. Only a reboot seems to solve the problem.
It's worth noting xorg.conf is not being used. It's an nVidia card in these laptops and I tried the latest drivers from them - they totally wiped out the display, I mean total FAIL, unusable. Had to boot up in without GNOME, run level 3, to fix it. After much messing around, I think I used the FirstAidKit plugin for xserver to repair things. Since then there is no xorg.conf:
[Code]....
If I restore *any* xorg.conf file it all goes wrong again, so I'm guessing there are either some defaults at play or there's another system currently managing my display. Either way, restoring/editing xorg.conf won't help me with the current set-up.
View 8 Replies
View Related
Jan 21, 2010
Whenever I minimize a window, it disappears into the right corner of the screen. There is no sign of it in the panel(bottom) also. What should I do so that I can relaunch the windows from the panel.
View 2 Replies
View Related
Dec 17, 2010
You all know this beutifull boot up screen you get after fresh Fedora install. And i have home encryoted so i get also beautifull screen (with cute lock icon) to type my password in. But as soon as i install nvidia drivers this screen is gone, instead i have this ugly progress bar to show me how boot is progressing and when i asked for password i get this out of resolution konsolesque screen. How can i get back my beautiful boot screen.
View 12 Replies
View Related
Feb 22, 2010
I'm have much computer experience but am new to Ubuntu. I typed in sudo apt-get install ubuntu-desktop and it tells me it's already installed. Good. So it should work. I type sudo/etc/init.d/gdm start and the screen goes blank for 8 seconds three times in a row and then back to the command line. I have also tried gdm start without the path before and it says GDM already running. Aborting!
View 5 Replies
View Related
Mar 12, 2010
I've installed xUbuntu on a machine I will be using as a file server. Everything is fine except one thing. If the server suffers an improper shutdown such as a loss of power the next time the machine boots it gets to the GRUB2 boot menu and then waits for a keyboard input.As this machine runs headless with nothing connected other than a network cable and power lead and is tucked away under the stairs it's quite an inconvienience to go to the machine and plug in a keyboard so I can press enter.Is there some way I could force the machine to boot as normal without stopping at the menu ?
View 3 Replies
View Related
Jan 20, 2009
I'm trying to install F10 on an Abit VP-6 mobo with an old Lite-On DVD drivethe install begins, it loads the kernel, it asks for keyboard layout, asks for languagethen it says it can't find the installation media and offers to let me pick from a bunch of drivers that look to be mostly for wireless cards and SATA controllerswhat gives?it had to read the drive to get this farwhat changes part way through the install to cause this?just for grins I tried installing openSuse and had similar resultsthis ring any bells?
View 4 Replies
View Related
Sep 6, 2011
When i click on "installation / Live Gnome CD" a screen appears then it disappears fast and i get a black screen
- I checked my ISO Hash & it should work without problems
- I tried several CDs / ISO " KDE/Gnome "
*-*-*-*-*-*-*
MS-7366 (version 1.0)
Processor : intel(R) Celeron(r) D CPU 3.06GHz
Memory : 3 GiB
Graphic Card : nVidia 8400 GS , 1 GiB
View 8 Replies
View Related
Aug 25, 2011
I just did a clean install and started with the software installation. After I installed dropbox, a window popped up asking me for administrator's password....I put in my user password and it said wrong password (i just now remembered not adding myself to administrator's group while creating my user...ouch!) after which a notficiation came and went too fast for me to read it properly....it said something like unable to set user /etc/x something something.....I know it sounds completely vague but that is all I could before it disappeared.
Now, nautilus won't open unless I click on the dropbox icon below in the taskbar.I guess I can manage for a while but I'm hoping to find a solution to the problem.
View 2 Replies
View Related
Dec 10, 2010
I have Dell Vostro laptop with Core2 processor 1.8 GHz, 2 GB RAM. I want to install Fedora. I tried to install it with Fedora_14_ 32 bit and Fedora_14_ 64 bit. After booting by DVD or USB, I get initial blue screen in which I select Install and it starts for few seconds and freezes there, it does not move ahead. I got Fedora 32 bit DVD from Fedora so it should have come with checksum checked. So IMO DVD is ok, it is something else with regard to hardware detection, stopping installation to go ahead. I tried 3 times, but do not go ahead.
View 4 Replies
View Related
Nov 21, 2009
I 've just upgraded from f11 to f12 via preupgrade everything went fine, i corrected the rpms in package-cleanup --orphans and i have nothing in --problems and --dupes
The problem is with kde, i get a ~35 sec lag (screen completely frozen, mouse moving but ineffective, keyboard shortcut like ctrl-c, ctrl-alt-backspace and ctrl-alt-fn executed only after the lag) when: starting kde (read below) closing kde (35 secs between the kde close sound and the beginning of any real shutdown) starting programs like: krunner, lancelot, konsole, gnome-terminal, kickoff it does not happen when running most programs, like opera, firefox, gedit, even xterm it does not happen in a gnome-session
Running krunner gives a dbus error message:
So i thought maybe it was a dbus timeout so i tried setting a lower timeout in session.conf and system.conf, but it doesnt change anything xcept kde startup: with the lower timeouts, the kde load screen takes less time, i see the desktop but then it hangs for 35 secs before loading programs and plasmoids with the standard dbus config, the kde load screen takes 35 secs more but then the desktop loads right.
View 8 Replies
View Related
Mar 24, 2010
Konqueror opens in full screen every time which is more a nuance than an issue, I just haven't had time to search why; I'm seeing if anyone else has this issue or knows the preset to change how K. starts up. I don't use Konqueror enough. I can right click to take it off full screen mode, but for who ever else who uses it, it can be a nuance.
I also have this same issue with Thunderbird, but I can't get it out of full screen mode there is no menu bar up top to reduce, minimize or close out.
View 9 Replies
View Related
Nov 22, 2009
i could manage to install fedora 12 on my laptop (asus f6a) using the iommu=off option, but when i try to boot it i just reboot without even seeing the fedora logo, i just see the the prompt for 5 seconds and then it reboots.
View 3 Replies
View Related
May 16, 2010
When I close the lid on my laptop, it blanks the screen but does not sleep or hibernate. When I open the lid, the screen wakes and everything runs, but my mouse cursor has disappeared. I can restart the desktop ctrl-alt-backspace and get my mouse back.
My hardware:
- Lenovo Thinkpad X61 Tablet
- Intel GM965 video
- Ubuntu Jaunty (v9.04)
View 2 Replies
View Related
Sep 14, 2010
So I have Ubuntu Lucid machines about 20 of them. Configured via ldap authentication. I seem to be running into a rather strange logout problem. Whenever users click logout they're logged out, however after that all i get is the background screen with the cursor. The cursor is able to move, but no login screen.If i go to a terminal window alt+f1 and do a service gdm restart, then the login screen goes back to normal.
View 3 Replies
View Related
Sep 22, 2010
My Ubuntu was working perfectly fine until this morning. It is the latest release (10.04 I think) and it is the 64 bit version. This morning I go to my computer and see there are some updates waiting. I install the updates without paying much attention to them. I really do not remember what the updates were. Then Ubuntu asks me to restart so I restart. After restart I get the usual log in screen and I hear the drums. I put in my password, press enter and then the log in screen disappears and I expect to see my desktop. But that does not happen. Instead in a split second after disappearing, the log in screen reappears and I hear the drums again.
At the beginning I thought that I simply forgot my password. But that is unlikely because I have been using the same password for 6 years now. But just in case I tried an incorrect password and I got a different behavior. If I put in an incorrect password, Ubuntu will simply say "authentication failed" and the log in screen will not disappear. When I put in the correct password, the log in screen disappears for a split second (as if my password is correct) but then instead of taking me to the desktop it takes me back to the log in screen and sounds the drums again.
View 9 Replies
View Related
May 25, 2010
In KDE @ Slackware 13.1, turn on composite, and lock the screen. Then move the mouse. For > 3/4 of the time I can see the screen saver suddenly disappeared and my desktop showed up for about 0.1s, then the screen saver came back and asked for password. This problem can enable unauthorized people to peek into a locked screen. I don't know if this is because of my poor laptop with Intel integrated graphics. Can anyone reproduce it?
View 6 Replies
View Related
Mar 28, 2009
I have recently got a new computer, and I have been trying to install openSUSE 10.3 on it. But, the screen will go blank and become unresponsive if I boot with the default options. When I switch to text mode, it boot and stops when it outputs time: pit clocksource has been installed. Switching to safe settings will make no difference. Right now, I am using openSUSE 11.1, but I'm not very happy with it, so I intend to replace it with 10.3. I'm not sure what the pit clocksource is, and can it be disabled, or some workaround?
my specs are:
AMD Athlon 64
PCIe NVIDIA 7100 GS
NVIDIA MCP61P northbridge chipset
View 1 Replies
View Related
Dec 25, 2009
configuration: $uname -a
Linux perosoft.home.org 2.6.31.6-166.fc12.i686.PAE #1 SMP Wed Dec 9 11:00:30 EST 2009 i686 i686 i386 GNU/Linux
$/sbin/lspci -nn | grep 'VGA|NV'
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS [10de:0422] (rev a1)
$rpm -qa|grep kmod
kmod-nvidia-2.6.31.6-166.fc12.i686.PAE-190.42-1.fc12.8.i686
kmod-nvidia-PAE-190.42-1.fc12.8.i686
i have created a shortcut for konsole on desktop, if i click on icon all desktop is freezing for 10-15 seconds before konsole is launched. if i have the same aplication overlapped in taskbar and i click once same thing is happening, desktop is freezing before select menu is appear.
View 7 Replies
View Related
Jul 27, 2010
video in videos disappears when i try to see it fullscreen. happens everytime. i'm using firefox 3.6.6. what is wrong here?
View 5 Replies
View Related
Mar 8, 2010
how do i get my ubuntu screen to not go dim after like 30 seconds?
View 2 Replies
View Related
Oct 31, 2010
I'm running Ubuntu 10.10 which I recently installed on this emachines w3107. For some reason, while doing whatever I may be doing, my screen will flash off and on for about a minute, then when it stops flashing; there is no mouse pointer visible. I can still use the mouse, but it's ghost-like.
View 1 Replies
View Related
Mar 21, 2011
I downloaded AlienBobs LibreOffice 3.3.1 package [url]. I installed it without any problems.
But when I try to start it, the splash screen shows for a moment and then disappears.
When I strace /usr/lib/libreoffice/program/swriter I get this:
Code:
On my notebook (which unfortunately is broken) the program ran fine. JRE is installed.
View 4 Replies
View Related
