1- how I can deactivate selinux and the root password on fedora 15?
2- I can't use copy, cut past in the GUI !!
3- even with (su -) I can't modify files like shadow or config !
I want to start to play with "homemade" kernels. (To get some experiences in this subject). I want to do this step-by-step. I have already read a lot about this. I have a Fedora 10 running. So I want to start with this. I have read that there is a "special" way to create a kernel for Fedora. [URL] OK. I understand this +/-. When you build a new kernel with an other version number, you have to rebuild all the modules with this new kernelversion, and you have to install these also.
But : I want to start with modify only some parameters in my kernel config. Do I need to rebuild and re-install the modules also? Will it not be enough to rebuild only the kernel? (vmlinuz) Where can I find some information about the options I can disable in my kernel to speedup my system? (boot process ed). I want to suppress the loading of unneeded modules. I want to understand the options in menuconfig (and there are a lot of options ! ! )
I recently mashed the passwd, shadow, gshadow, group files in my Fedora 12 installation. I was dumb and didn't take a copy of the originals and all I have is the originals from a Fedora 11 installation.
View 2 Replies View Relatedi need to add a line in the login start up file(s) (one of ~/.bash_profile, ~/.bash_login, or ~/.profile) and startup file run by my shell when started as a non-login shell (~/.bashrc) so as to set up my account envirnoment for one of my courses.I don't know how to proceed with this. I tried doing this in my ubuntu enviroment and my system got locked after that.
View 3 Replies View RelatedI want to modify apache IPv4 configuration to IPv6 configOn both windows and ubuntu.
View 1 Replies View RelatedI have a multi user system for my roommates and myself that has separate folders for each of us. I've got user authentication working with samba, but unless I set every file and folder readable/writeable by all users, I can't browse it or edit the files.This isn't ideal as the shares are open to other users access, so I'm hoping there's a way to keep folders at 750 and files at 660 while allowing samba users to browse, delete and edit.Also, the samba share is actually a mounted NFS share from another server. Both the NFS server and the Samba server have the same users/uid's. When a file is created from a Windows host via the Samba client, the NFS server's permissions do show that the correct user owns the files, but since the files aren't mode 666 but 640 I can't edit or delete the file.
View 4 Replies View RelatedI'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedI've installed the packages required to use a wiimote as a remote control in Fedora, and am currently trying to write a config file to use the wiimote for Clementine.My file currently looks like this:
Code:
# This is the wminput-clementine file
Wiimote.A = KEY_F6 #Play/Pause
[code]....
I've deleted /etc/apache2 and did run:
Code:
sudo apt-get -o DPkg::Options::="--force-confmiss" --reinstall install apache2.2-common
to get the default config back.
But starting the server via:
Code:
sudo /etc/init.d/apache2
results in:
Code:
Syntax error on line 161 of /etc/apache2/apache2.conf:
Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration
line 160-163 look like this:
Code:
<Files ~ "^.ht">
Order Allow,Deny # line in question
Deny from all
</Files>
The funny thing is that the exact same definition is in a debian lenny server config on another server. So why did this install a not working config?
I just removed apache2 via:
Code:
sudo aptitude remove apache2
sudo rm -r /etc/apache2
and reinstalled it via:
Code:
sudo aptitude install apache2
which also did not fix the config bug?
For testing I installed apache2 on another ubuntu 9.10 and did just copy the folder /etc/apache2 to my local installation - this fixed the problem. Still, why cant I reinstall apache2 with a working config?
1) Whenever a new release of Ubuntu comes out, I've always done a full replacement (Booted up live CD, formatted / and formatted /home) to ensure there's zero incompatibilities, including configuration files in my /home. That has, finally, gotten annoying and I was wondering what the actual chances of a configuration file causing problems was in the 6 months that Ubuntu was released in. Also, special consideration for Gnome 3 (aka gnome-shell) coming out with the current gnome configs.
2)Any way to remove unneeded config files automatically? I don't always use purge when I remove a package just in case I want to reinstall it, well weeks later I def don't want it, is there an apt or dpkg command that will automatically remove them after the package is gone? I know autoclean and autoremove handle orphans and unneeded .deb's
3) How stable is Sidux in reality? Ran it in a VM and had a few errors every so often while using it, but i wasnt sure how much of that was the fact it was a VM. Some say its stable enough for daily use, some say it breaks every other day
I am bulding my own image based on 2.6.32 kernel, I wish to add a guest user:
In a script thats invoked by the makefile, I use 'useradd' command & this updates the shadow, passwd files under /etc on the host, is it possible to tell the command to create the shadow / password under some other folder on the host? may be /tmp?
i have downloaded the RT3572 driver from railink and put it in my home folder executed the following then:
Code: bunzip2 2009_1222_RT3572_LinuxSTA_V2.3.0.0.tar.bz2
Code: tar -xvf 2009_1222_RT3572_LinuxSTA_V2.3.0.0.tar
no problems here I have modified the 2 files as instructed:
Quote:
4) add the device and vendor id "{USB_DEVICE(0x1737,0x0079)}" between the "#ifdef RT35xx" and "#endif // RT35xx //" in the file "common/rtusb_dev_id.c"
5) modify the "os/linux/config.mk" like I described in my previous message
no problems here: next step according to all instructions: sudo make and sudo make install, trips me up, i get "no targets specified and no makefile found" probably a basic mistake somewhere here, but my knowledge of the command line is zilch
KVM - virtualization
Fedora 11, 32 bit, as guest (VM)
Other guests (VM) - Debian
There is no partition on hard drive
During installation it comes to following page
Installation requires partitioning of your hard drive. The default layout is suitable for most users. Select what space to use and which drives to use as the install target. You can also choose to create your own custom layout.
Drop window
Code:
Use entire drive
Replace existing Linux system
Shrink current system
Use free space
Create custom layout
[uncheck] Encrypt system
Select the drive(s) to use for this installation.
(it is grey out)
Advanced storage configuration
Code:
How would you like to modify your drive configuration?
(check) Add iSCSI target
[Cancel] [Add drive]
What drive would you like to boot this installation from?
(it is also grey out)
[uncheck] Review and modify partitioning layout
Always had this problem on F13... if I run kword from console as root I get.kwordkword(14580): Session bus not found
KCrash: Application 'kword' crashing...
sock_file=/root/.kde/socket-icebox/kdeinit4__0
Warning: connect() failed: : No such file or directory
[code]...
my task is to store the data to a file at server sent via HTTP POST, i written suitable cgi script in C, but the PROBLEM is that i can't complete the task, I guess i require server permission to do so, how to configure server or how to get access right from server to store data to a file.
View 3 Replies View RelatedI have a ftponly user "rom" in my box. This is used by our vendor to send files through ftp. When they send files the ownership of files are all the same as user name group created in this machine.But our application engineers use another user name "deb" to process these file. But as the owner of these file are "rom", they cannot process with their user. Manually they modify the user name and group and then they able to process.The group ID of the two users are different and its application dependent.how should the ownership will be modified automatically or is there any workaround or script to modify the ownership of these file for application user's?
View 5 Replies View RelatedThere's some sort of shadow on my right desktop. No idea how it got there and it persists through reboots.
View 2 Replies View RelatedI need to modify the ISO file by adding few files so that after all installation done I can run a sh script to do some thing on the box. How to do that?
View 4 Replies View RelatedIs it possible to change the number of files that are displayed by the recent files list in gedit? Running Ubuntu 9.04x64. Gedit says it's 2.26.1
View 2 Replies View RelatedI have a program I use, rrdtool. I need to modify a ds value on every file at the same time. However, using a wildcard (*) to try this operation of all files does not work and instead only updates one file.
Here is the command syntax:
rrdtool tune <file> --maximum traffic_in:100000000000 && rrdtool tune <file> --maximum traffic_out:100000000000
So, how can I do this on every file in the directory?
just thought i would throw this out there as a google search doesnt even come back with what i need. I have setup proftp with a mysql auth on a debian box. When i save files or try to modify them i get an error. Ie i dont have permission. When i look at the permissions for the files, it has a 2001 user permission and a ftpgroup as the group permission.
I want it to be ftpuser and ftpgroup with readable and writable permissions for the user and group. This is my second proftp box and i basiclly copied the config files over from the old box.
I upgraded to F14 from F13, and when the process was complete, I noticed on my desktop, I have a strange drop shadow on the left-hand corner. As if it's shadowing an invisible window. You cannot interact with it, it's not "really" there.It is very annoying, and I can not figure out what it is, or what is causing it. I've checked all my plasma widgets and things like that, but it still persists.
Anyone run into this before or have any ideas?Here is a screenshot showing the shadow, I intentionally set my background to white, so you could see it best. But it shows up on top of any wallpaper. and you can clearly see it underneath translucent term windows/etc.
I am configuring a third party repo (Project fog).Actually i need to know ,How to edit config.sh
The error i am getting is > Checking package: php-gettext...Failed!
The manual say that .
It is a part of the base PHP package. You will need to edit /lib/redhat/config.sh & remove php-gettext from the packages list on line 22 .
Is it possible to somehow setup a secondary group of log files that log every action taken on the server where your average user wouldn't know that they're being logged. Perhaps if a hacker got in and messed around or something you'd be able to see what they did, but they wouldn't have permission to modify the file.
View 1 Replies View Relatedi've been wondering how do i know if some users create/modify/delete file/directory in linux, i've been using pyinotify in python script.this script like the example from the manual:
Code:
#!/usr/bin/python
import pyinotify, os, time
[code]...
I recently started using SVN with Apache for my web development, although I find it really annoying that I have to issue two SVN commands (one local, one remote) to update my web site. I have been looking into SVN post-commit hooks to solve this problem. The only problem is that apache does not have permission to modify files in my user directory... So here is how everything is setup. I am running Slackware 13 full install. There have been no installations overriding any of the default installs.
[Code]....
Has anybody been able to get NX (Nomachine) running on Fedora 10 configured using a shadow session of the local desktop (X11-local). I am experiencing some kind or cookie creation error, perhaps privilege related?
FYI. Normal unix-kde sessions work fine (e.g. Giant on Box) and shadow sessions of an existing unix-kde session works fine too. A shadow session of the local display is a bust.
Here's the error log:
Code:
NX> 203 NXSSH running with pid: 4076
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
[Code]....
kmod-nvidia reflects 180.25 version but when I try 'service akmods restart' the check defaults to the original and installed 2.6.27.12-170.2.5.fc10.x86_64' and will not recompile for the newer? All appropriate packages are installed. Running in level 3 as X server won't launch.
View 3 Replies View RelatedI just updated from Fedora 8 to 10 to 11 today. When I run system-config-display I get the following message:
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 33, in <module>
import rhpxl.monitor
ImportError: No module named rhpxl.monitor
If I comment out that line, the next one fails, and so on. I installed a newer package, 1.1.3-2.fc11, because I thought maybe the installer didn't put it on and that behaves the same. Why this won't run? I would desperately like to use my widescreen monitor and I'm hoping that 11 will finally support my intel graphics correctly.