Fedora :: Upgrade Left Shadow On KDE Desktop
Jan 31, 2011
I upgraded to F14 from F13, and when the process was complete, I noticed on my desktop, I have a strange drop shadow on the left-hand corner. As if it's shadowing an invisible window. You cannot interact with it, it's not "really" there.It is very annoying, and I can not figure out what it is, or what is causing it. I've checked all my plasma widgets and things like that, but it still persists.
Anyone run into this before or have any ideas?Here is a screenshot showing the shadow, I intentionally set my background to white, so you could see it best. But it shows up on top of any wallpaper. and you can clearly see it underneath translucent term windows/etc.
View 4 Replies
ADVERTISEMENT
Apr 7, 2011
There's some sort of shadow on my right desktop. No idea how it got there and it persists through reboots.
View 2 Replies
View Related
Jun 11, 2011
After I have upgraded from 10.10 to 11.4 I have a very strange problem. My desktop seems to be unresponsitve to mouse right or left clicks. The file browser only starts if I use thunar. Nautilus will not run at all. I am not sure if they are tied together but everytime I reboot i get the error message the file browser is still open. If my iphone is plugged in i get a metacity error. I am booting into classic with no effects. I can work kinda but mostly starting everything from inside a terminal. Also Nautilus only will run if I start it under sudo...
View 2 Replies
View Related
Jun 28, 2011
I would like to use two monitors with my desktop, so connected them the other day and it worked straight away, which is good but... The monitor configuration app always want the primary monitor to be on the left hand side, thus it always extend my desktop right. Can I do anything to extend my desktop to the left instead of to the right so I can have background application on the screen to the left?
View 8 Replies
View Related
May 18, 2011
I am suddenly getting about 1.5" of the left side of my desktop on the right, covering what SHOULD be there. I thought it might be my gDESKLETS as I had problems with this newer version before but removing it didn't help, so unless it is leaving something that is causing it, I don't see this being it. & I haven't done or added anything else, that I can think of, that may be behind this. I AM running the default drivers for the nVIDIA card, but all seemed OK until recently.
This happens the most if I run a application in a reduced size window or run a ..... video full screen. Rebooting seems to clear the problem for the ..... & max then min the window clears it for that. I'm using gnome on F14.
View 9 Replies
View Related
Jun 25, 2010
I swapped my monitors and reconfigured x using Nvidia-settings. My main monitor is set as primary display and absolute. My secondary monitor is set to left of..
My desktop Icons default to the left monitor not the primary.
Is there a way to change this?
View 2 Replies
View Related
Apr 28, 2010
I recently mashed the passwd, shadow, gshadow, group files in my Fedora 12 installation. I was dumb and didn't take a copy of the originals and all I have is the originals from a Fedora 11 installation.
View 2 Replies
View Related
May 6, 2010
My issue is that while I was upgrading from Hardy to Lucid, everything was going fine until the very end when some packages were badly corrupted (according to the installer) and the upgrade could not complete. When I rebooted, it would not load into the login screen, and instead just presented me with a console. However, 10.04 showed up under GRUB, I loaded 10.04, and it worked fine, so I just changed GRUB to load 10.04 by default. I managed to fix the broken package problem from 10.04.
The problem now is that, since it was a "partial" upgrade and terminated before completion, I still have 8.04 on my hard disk. I can still load 8.04 and still get the same console, instead of the login screen. I just wanted to know how I can "complete" the upgrade and get rid of 8.04. Except for that one issue, upgrade was successful.
View 7 Replies
View Related
Jun 8, 2010
Upgraded x86 Karmic (which had OpenOffice.org 3.1) to Lucid via the Alternate CD. Why was OpenOffice.org not upgraded to 3.2?
View 2 Replies
View Related
Nov 18, 2010
I've been using Ubuntu for several years, and wanted to try the netbook remix on my old Acer Aspire 5050 laptop.
I tried to install and switch from desktop 10.10 to netbook 10.10, and the home page and menus didn't display properly. I took this as being due to some conflict with an exiting bit of software (I use it as a LAMP server and dev machine, so it had a lot of stuff one it). Keen to try the netbook edition, and clean down my laptop, I installed in from scratch, formatting the HDD etc.
Anyway, the issue is still the same.
It is quite hard to describe what is displayed. The left menu is just empty, with no icons. The top bar is also empty. When you mouse over the left menu, blank pop-outs appear. Also, some icons are blank or mangled. Occasionally, when I close a dialogue, or do an alt-tab, the left menu icons appear, but only for a split second.
Anyway, screen dumps (reduced to half size) will explain this better, so here are a couple...
Top and left menus showing as empty semi transparent bars.
Same with an app running
with mouse over a left menu item, and a blank pop-out with black surround. code...
View 9 Replies
View Related
Apr 25, 2011
I was using Maverick. I created a desktop icon for the trash and placed it on desktop. Then removed the one from the taskbar.
Now I'm running Natty Beta and the trashcan icon is still there. It is also in the Unity task bar.
I want to get rid of the one I created, but can't figure out how. I can't drag to trash, right click only gives properties.
The menu item from desktop "Customize toolbar" doesn't work. Looked at gconf-editor no luck.
View 3 Replies
View Related
Apr 20, 2010
I've just upgraded to kubuntu 9.10, and I'm getting strange errors when trying to copy files onto my MP3 player, a SANSA M250 (2GB). df claims it's at 57% capacity (and the figures make sense for that, as well as having about the quantity of music which half fills the SANSA) but when I try to copy a file - from the command line, from exaile, or with the file manager, I get a "No space left on device" error:
Code:
$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 73939452 42184580 27998880 61% /
udev 512472 264 512208 1% /dev
none 512472 1752 510720 1% /dev/shm
none 512472 96 512376 1% /var/run
none 512472 0 512472 0% /var/lock
none 512472 0 512472 0% /lib/init/rw
/dev/sdc 1996000 1125056 870944 57% /media/SANSA M250
$ cp test.mp3 /media/SANSA M250/
CP: cannot create regular file `/media/SANSA M250/test.mp3': No space left on device
The MP3 being copied is 2MB in size so should fit easily.
There were no problems until upgrading, when I also moved from amarok to exaile - because amarok2 doesn't have the functionality I want from a player. But this happens even if exaile isn't running, so exaile shouldn't be the problem. How can I diagnose what's going on?
View 1 Replies
View Related
Jan 3, 2009
Has anybody been able to get NX (Nomachine) running on Fedora 10 configured using a shadow session of the local desktop (X11-local). I am experiencing some kind or cookie creation error, perhaps privilege related?
FYI. Normal unix-kde sessions work fine (e.g. Giant on Box) and shadow sessions of an existing unix-kde session works fine too. A shadow session of the local display is a bust.
Here's the error log:
Code:
NX> 203 NXSSH running with pid: 4076
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
[Code]....
View 14 Replies
View Related
Aug 3, 2011
1- how I can deactivate selinux and the root password on fedora 15?
2- I can't use copy, cut past in the GUI !!
3- even with (su -) I can't modify files like shadow or config !
View 10 Replies
View Related
Sep 13, 2015
I've been having a problem with debian lately. It seems that sometimes a rectangular corner on the top left of my screen freezes and shows what was previously there. It goes away when I close all open windows but shows up again if I open multiple applications, especially if I open the terminal and another application. It can become very distracting and makes it impossible to see what is on the top left corner of my screen.
I'm including a screenshot of my desktop.
I am running Debian 8.2 Jessie on an Asus Q400A with 8 GB of RAM. I have an Intel Core i7-3632QM CPU @ 3.2GHz and am using XFCE as my Desktop Environment.
View 1 Replies
View Related
Aug 13, 2010
I recently tried out the awm version of the desktop environment. When I switched back to the Gnome desktop, I found a couple of titlebar-like artifacts left on the desktop.I did some experimenting, using System Monitor and the Kill xxxx command and managed to rid myself of one of the artifacts. The remaining artifact can be taken care of by using kill xxxx comand for the gtk-window-decorator but, this basically renders window buttons useless after the command is issued.
I think I had a couple applications running at startup in Gnome desktop before I switched to awm, and they didn't start at startup when I returned to Gnome desktop, but the titlebar-like artifacts did.Is there a way to reset the state of the gtk-window-decorator in a manner that is less destructive, and which allows my desktop to be clear of this artifact?
View 1 Replies
View Related
Aug 15, 2010
I have noticed that the initial ordering of icons of my desktop is leaving a blank space on the top left corner. Recently I have changed my language but I am not sure when this began to happen.
View 7 Replies
View Related
May 28, 2011
After playing one of the kde games in squeeze- breakout - which I had a hard time exiting - and even after I restarted the computer the cursor will not go to the lower left corner of the desktop, where the kde menu button is.
View 1 Replies
View Related
Dec 26, 2010
I upgraded from 9.04 to 10.04 then 10.10. Now my left mouse buttons doesnt work when I click the pplications menu. Sometimes it doesnt work at all. left or right click. This is very frustrating to say the least. I have seen a few posts that look similiar and have tried what they sugested, but it still doesnt work. I have tried different mice, but it is the same problem. I dont see any error msgs in any logs I look in. Im thinking my next step is to reinstall, which Im not too excited about.
View 1 Replies
View Related
Sep 2, 2010
I upgraded from FC11 to FC13 last night. The desktop has not been stable since. It will run for anything from 5 to 30 minutes before it locks up. Interesting, if I am already ssh'd in, I can perform commands, but a new SSH will hang, and if I try to SU to root in an already logged in ssh, it hangs.
However, I did finally manage to get the messages that were logged to /var/log/messages at the time of the desktop freeze.
Here are the messages. The first 3 about high speed usb may or may not be relevant. The freeze appeared to happen around the 4th message in the log below.
Code:
Sep 2 13:16:57 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:26:38 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:31:20 starbug kernel: usb 2-4.2: reset high speed USB device using ehci_hcd and address 6
Sep 2 13:38:03 starbug kernel: INFO: task jbd2/dm-0-8:558 blocked for more than 120 seconds.
[Code].....
View 1 Replies
View Related
Jul 11, 2011
I used 'preupgrade' to upgrade from Fedora 13 to Fedora 15. After some problems during reboot, Fedora 15 finally finished the "Upgrade to Fedora 15" step and I was able to successfully boot into Fedora 15.
But my desktop items from Fedora 13 are gone. While the new GUI is nice I would like to recover my desktop items from Fedora 13. How do I do that and put them on the main Window desktop of Fedora 15 ?
View 1 Replies
View Related
Jan 8, 2010
I'm learning to configure tftp-server and using vi editor - google search not helpful at least what comes up first - maybe different in Fedora ?
[url]
Code:
But . . . vi editing etc/shadow I get . . . E45: 'readonly' option is set (add ! to override)
In INSERT MODE - do I add ! as !wq instead of :wq as I found in google search (that's NOT working) - - or - do I add ! on the line to set tftp server password to * -or - what?
View 6 Replies
View Related
Jan 20, 2010
This is weird, today I updated my system and while trying to visudo from single user mode got
"cannot read /etc/shadow: Permission denied"
which kept me from doing anything until I switched to file permissions of 400 on shadow, then back. Is this being experienced by anyone else or just me? /etc/security/limits.conf doesn't seem like it wants to change in enforcing mode either and I can't find any alerts to provide clues on the situation.
View 8 Replies
View Related
Mar 6, 2010
I'm trying to setup ssh access on my Fedora 12 laptop. I get the following error message in /var/log/secure when I try to login from another machine using ssh and the login is denied:
Code:
sshd[3025]: error: Could not get shadow information for <user>
sshd[3025]: Failed password for <user> from <ip> port <port> ssh2
If I do a 'setenforce 0' I can login and no error is logged.
View 10 Replies
View Related
Feb 20, 2010
I got Ubuntu 9.10 running very well. ever since this morning when i booted i have that weird Panel on the desktop towards the left. It is showing basically the Application menu. I dont know why? I know i did not change anything. Also since this morning my right klick on the desktop nothing happen either? i dont want that on the Desktop!
View 6 Replies
View Related
Jul 12, 2009
Just upgraded from FC10 using the DVD using upgrade option. I got all the way through the upgrade with no problems. However, upon reboot, when I get to my login screen, I sign in with my username and password but I get an error about kstartup manager. I think the gist of the message was it is missing and I think the error # was 127 (I think). KDE will not start. I also tried XFCE, but it will not start also.
What should I do?
View 2 Replies
View Related
Dec 20, 2009
after the upgrade to Constantine I have a strange behaviour with plasma. The whole desktop freezes when a plasma widget pops up - like opening the menu or plugging in a disk and the mount options are shown. The X server still runs fine (Mouse and Keyboard are still working). Afterwards everything works fine again, I can even use the widget. I also tried a fresh install, and with the noveau driver the problem wasn't there, only after I installed the nvidia driver the problem reappeared again. Desktop effects are diabled. When I try killing plasma-desktop and restarting it from the command line, the desktop also freezes for a short time again, and I get teh following output:
[Code]...
I couldn't find anything helpful in Xorg.0.log or dmesg/syslog. I used nvidia-settings to configure xorg. I have a nvidia 6600 GT. If you need more infos just ask.
View 2 Replies
View Related
May 4, 2009
I tried doing an upgrade straight from fc5 to fc10. The upgrade seemed to go all right but once it was completed I've noticed some issues. My main issues are these:
1. After the upgrade all my desktop icons have disappeared and I'm not sure how to recover them. (this applies to all user account on a home machine)
2. When I click the right mouse button on the desktop I get no context menu but I do get the menu when I right click on my top or bottom menu bars.
3. When I try to launch any applications, games, etc., I see the icon show up in the bottom menu bar for a few seconds but then it disappears and the application never launches.
Those are the primary problems I'm encountering right now. I know the files in the home directories are still there (I did CTRL-ALT-F2 into a terminal and logged in as root. Normally I would've done CTRL-ALT-F1 but when I did I saw acpid messages and no prompt.) I've looked through the forums here but nothing I came across quite seemed to fit my needs.
View 7 Replies
View Related
Jul 3, 2009
I've been trying to write php or perl code to generate the sha-512 password hashes in fedora. I've been unable to do the hashing which is encoded in the shadow file on fedora core 11. Does anyone have php or perl code which provides the hashing algorithm. (All of my attempts result in the encrypted hashing being longer than 86 character -- the length that crypt says the sha-512 should be)
View 3 Replies
View Related
Feb 7, 2011
I am using nx client and I would like to ask your help. Is it possible when I connect from home to my work's computer (using nx client) to see the exactly same desktop-taskbar and open programs as I left them in my work computer.
Imagine that you are at work using your computer. You lock the keyboard and you go home(you didn't turn it off). You go home and you login to work's computer. What I want to see is the same if I was just unlocking works's computer. IS that possible and how?
View 9 Replies
View Related
