Fedora Installation :: F11 - Review And Modify Partitioning Layout
Jul 25, 2009
KVM - virtualization
Fedora 11, 32 bit, as guest (VM)
Other guests (VM) - Debian
There is no partition on hard drive
During installation it comes to following page
Installation requires partitioning of your hard drive. The default layout is suitable for most users. Select what space to use and which drives to use as the install target. You can also choose to create your own custom layout.
Drop window
Code:
Use entire drive
Replace existing Linux system
Shrink current system
Use free space
Create custom layout
[uncheck] Encrypt system
Select the drive(s) to use for this installation.
(it is grey out)
Advanced storage configuration
Code:
How would you like to modify your drive configuration?
(check) Add iSCSI target
[Cancel] [Add drive]
What drive would you like to boot this installation from?
(it is also grey out)
[uncheck] Review and modify partitioning layout
View 2 Replies
ADVERTISEMENT
Nov 29, 2009
I have several partitions on my hard drive, and like to use the 'Create Custom Layout' option during the installation process, to make sure that I don't loose any of my existing partitions or the data on them.
I have attempted a minimal F12 installation from Fedora 12 DVD. But the 'Create Custom Layout' option is not an option in the menu.
How do I install F12 and tell anaconda exactly which partitions I want to use and format?
My current working partition layout is shown in the attached screenshot.
I want to use the following custom partition layout during the initial F12 installation:
Code:
/dev/sda2 / Fedora-12-root
/dev/sda3 SWAP
/dev/sda11 /var/log/ var-log
/dev/sda12 /tmp tmp
This allows me to share existing partitions between my current working F10 root partition, and the newly-installed F12 root partition. So if there are problems with the new F12 installation, I still have a working F10 system to fall back on.
The other partitions with data on will be mounted when the intiall installation has been completed
View 4 Replies
View Related
Dec 27, 2009
Since the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?
View 2 Replies
View Related
Dec 2, 2009
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies
View Related
Nov 21, 2009
going to be putting it on my laptop and wondering what partitions i should have and the sizes. think its a 1gb drive.
View 1 Replies
View Related
Dec 27, 2010
I am trying to install 2 or 3 versions of linux on my hardisk of 500GB capacity. The configuration of my machine is Intel Dual Core, 4 GB Ram, 3.0 Processor Windows XP is not installed on this. I tried to use a tool called GParted but was unable to use as it was not able to bring up the XServer So I booted the machine with fedora14 installation CD and chose "Custom Layout" After reading about the partitions needed by Fedora I created 3 partitions in /dev/sda /dev/sda1 the boot of 500MB formated as ext4 /dev/sda2 the swap of 6096MB formatted as swap /dev/sda3 / size 150GB formatted as ext4
The installation went well and fc14 runs well on this. However when I went to install the other linux version ....the installer was not able to recognize the unallocated space of nearly 350 GB on the hard disk.....So I am not able to create new partitions and then install the new linux on the newer partition. As a result I am unable to make use of the remaining space on the HDisk. I think I should have created /dev/sda4 /dev/sda5 etc when I installed fc14 itself....
View 4 Replies
View Related
Feb 6, 2009
I need to upgrade a machine to F10 (64-bit), and I need to make a decision on whether to start using LVM or stick with the classical partitioning mode. I have used RedHat/Fedora for quite some time, and always used the standard partitions. Fedora documentation says that LVM (Logical Volume Management) partitions provide a number of advantages over standard partitions. Also, numerous contributors on these forums seem to favor LVMs. In order to make an educated decision I need answers to some questions:
1. What are these advantages that Fedora documentation refers to?
2. Is it easier to work with LVMs than with classic partitions?
3. For those of you who have experienced working with LVM partitions, what were the advantages/disadvantages to working with LVM partitions?
View 13 Replies
View Related
Oct 12, 2009
I need to make a fresh new installation of KDE Fedora 11 where some partitions are formatted using XFS. The installer's partitioning wizard has no option for XFS. I've been able to load the XFS module as root (modprobe xfs) but it looks like the XFS tools are completely missing.
Two of these partitions are / and /home so it'd be quite hard to do the "switch" after the installation.
I have read the FAQs at [URL] as well as the XFS thing by Colin Charles. But as I am new to Fedora I don't understand the sentence "At the installer prompt, type this ...". If the installed is the bootloader, then adding the xfs in the end of the boot line won't help. If the installer is the iconized program I see on the desktop after the end of the boot, the it's name is "liveinst" and adding the xfs option won't help.
View 2 Replies
View Related
Jun 19, 2010
I'm trying since days to set up my netbook with Fedora and FreeBSD dual-boot and leave some space for a third OS. Most guides suggest to install first FreeBSD and then Linux, that attempt ended up in a disaster (BIOS hangs with the FreeBSD formatted HD connected; disconnect it => boot from USB => reconnect HD => format HD solved that). So I tried the other way around but the installer doesn't like my partitioning all to much.
[Code]...
after the installation sda2 is 300.000MB (the 50G unused were added to /home). Furthermore cfdisk can't open sda anymore (FATAL ERROR: Bad primary partition 1: Partition ends in the final partial cylinder). at my last try the installer canceled due to an error from python. But apparently after it wrote the partition table, cfdisk could display the HD partitions without error and it even was correct! "replace existing Linux systems" didn't work after that either - the partition manager suggested the usual partitioning (using the whole disk), however, "using free space" was able to display the real partition and after repartitioning (suggestion was to keep the old partitions on sda1 and 2 and create the new system in
Code:
rest (~50.000MB) unused ) I could for the first time install the system on the partitions i actually told it to. Unfortunately this doesn't mean the problem is solved for me because I (I did not censor that!! =>) ****ed my HD again with the next try to install FreeBSD (same scenario as mentioned above, but that's a story for the FreeBSD forum) so I'll run into the same issue after I restored my HD (unless i can reproduce the exception).
View 3 Replies
View Related
Nov 7, 2010
Fedora 14, 64-bit. In installer i came to partitioning, chose option: User Free Space, on hdd i have a partiotion (unformatted) of 40 GB. Still, installer says:
Quote:
Could not find enough free space for automatic partitioning, please use another partitioning method. What should i do? PS. I don't want to create partitions manually, because I don't know how to do it and installer is going to do it way better itself. I can't use whole hdd either as i have windows and data on it which i cannot lose. PPS. I tried unformatted partition, unallocated space (of 40 GB), options: User Free Space, Create Custom Layout, but i always get an error msg about 'not enough space'. Is it possible, that installer is bugged?
View 8 Replies
View Related
Dec 20, 2010
I am going to set up a home server (command line only) with 2 x 1 GB HD and 4G memory. hat partitioning scheme would you recommend? Not more than 5 users Fedora Core only Will host a web page Will run DNS, DHCP, SAMBA, LAMP, NTP, Firewall, etc.. Just normal stuff.The server will host a large amount of video/audio/picture files
View 5 Replies
View Related
Feb 23, 2011
I am building a new MiniITX system and partitioning/mounting points for SSD optimization. The majority of / will be on the SSD, but files that are written to often shouldn't be there as the high write operations will diminish the lifetime of the SSD. I will also have a 450G SATAIII drive where I believe that directories like /tmp and /home should be. I also like the idea of a RamDisk for browser/etc files
Intended system:
MoBo: Minix 890GX-USB3
CPU: AMD Phenom II X4 910e Deneb
RAM: G.SKILL 8GB (2 x 4GB) DDR3 1333 (PC3 10666)
HDA: SSD Corsair SATAIII 2.5" 128GB
HDB: Western Digital SATAIII 2.5" 450GB
PSU: Pico 160W PSU
Case: MiniBox M350
OS: Fedora (with Win7 in VM or DualBoot)
View 3 Replies
View Related
Aug 3, 2011
1- how I can deactivate selinux and the root password on fedora 15?
2- I can't use copy, cut past in the GUI !!
3- even with (su -) I can't modify files like shadow or config !
View 10 Replies
View Related
May 12, 2010
I use Fedora 12 AMD64 and I partition my HDD with Default partitioning what happen when temp partition is full by files ?Can this happen ? for example my temp partition full by files and my system can not use temp partition .!can I say my Fedora clear temp after each reboot .?
View 5 Replies
View Related
Apr 11, 2009
I used to have F9 on my HP pavilion dv8000. I have been trying to install F10 (and even CentOS 5.3) on it and, during the installation process, when I choose the keyboard layout (english) it doesn't go on. Weird because I am using the same disk I successfully used to install F10 on my desktop. What could it be? The same problem happens when I make the installation process in text mode...
View 1 Replies
View Related
Jul 28, 2011
Trying into install fedora. I am setting up my system as a dual boot over two drives. I have set up a custom layout and whenever I get to the step to write changes to disc it crashes with an unhandled exception. I have tried multiple times now, it always crashes.
Here is the first line from the exception report:
anaconda 15:31 exception report
Traceback (most recent call first):
File "/usr/lib/python2.7/site-packagees/pyanaconda/storage/devicelibs/swap.py", raise SwapError("swapon failed for '%s'" % device)
View 10 Replies
View Related
Aug 17, 2011
I am trying to install fedora15, my devices are as follows:
/dev/sda1- contains windows recovery
/dev/sda2- contains windows vista
/dev/sda3- free space
/dev/sda4- where fedora10 is existing.
Basically I want to scrap the fedora 10 in /dev/sda4 and install fed15 on the place (ext3). During the installation process fedora asked me, Which type of installation you want? I choose 'create custom layout'.
Then in the next window that appeared I choose /dev/sda4. Then it gives me four options like
Create Edit Delete Reset
I want to know what does this Delete mean. What will it do, will is erase all the older partitions within /dev/sda4 i made for fedora10 (previously I made three partitions /boot, swap, /) or will erase /dev/sda4 itself. I am scared to continue installation further.
View 10 Replies
View Related
Jan 9, 2010
I ve got Eeebuntu 3.0 installed on one partition, and Fedora 12 installed on another, sharing the same /home partition, and within that, I have them sharing the same user folder. It complicates matters as Eeebuntu (with it's Ubuntu 9.04 base) still has Firefox 3.0.16, and Fedora has 3.5.6 (Adblock no longer works in Eeebuntu, I stupidly upgraded it in Fedora). I want to keep the same partition layout, but resolve these conflicts. Is there any way I can change the /home folder for Fedora, or Eeebuntu so that each one has different settings, but still be on the same /home partition?
View 3 Replies
View Related
Apr 20, 2010
I have Fedora 6 & 10.3. Both DVD's will install the default partitioning (LVM) with either the normal programs or the custom selection. I wish to custom create my own partitions (about6 or7) with EXT3 format. The drive is112Gb. and I am only using about 30Gb. in total, giving approx. 80 Gb free. However after checking for dependencies the error message comes back 'Insuffient free space' every time. This happens on another M/board and/or Drive combination.
View 11 Replies
View Related
Aug 14, 2009
I got a new computer (core i7, 6gb ram, 500gb hdd).I first installed Windows 7, because I remembered how Fedora 9 created a dual-boot screen nicely, while if I installed XP on a system with Fedora 9 it would just take over the boot and boot to XP.Anyway, so Windows 7 is installed, and I got the Fedora 11 DVD install.I partitioned the hdd as thus (on win7 installation): 93gb windows system, 300gb media partition, 90gb unformatted.When I boot the installation and select the "use free space" I get an error that there isn't enough free space on the disks to create the layout.I also tried to create a custom layout, but after a few errors I gave up on that what should I do to get Fedora 11 installed?
View 9 Replies
View Related
Jul 22, 2009
I have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies
View Related
Nov 22, 2010
Im trying to shrink a 80 Gb ntfs partition. but when i clicked the shrink option the partition is like this:
"sda1(ntfs,0 mb)".
how to free up space in creating custom layout.
View 1 Replies
View Related
May 29, 2010
Running Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies
View Related
Aug 9, 2010
I have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (á © í ³ ? ñ¬ ·hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
View 7 Replies
View Related
Jul 10, 2010
13.1 - a distro that gets out of the way (review)
[URL]
View 7 Replies
View Related
Mar 22, 2010
some one using ubuntu 2.5 ultimate speakout about the stability of it
View 3 Replies
View Related
Mar 16, 2010
EDIT: not fully solved; there is (at time of writing) still an issue about bootlogd buffering until the logfile is accessible but that's probably as far as we are going to get for now, until someone peeks into the bootlogd source code.
Is it possible to review boot messages after boot? Kernel messages are available via dmesg (and many are logged early in the rc.M script by the /bin/dmesg -s 65536 > /var/log/dmesg) but many console boot messages are not kernel messages. During boot, messages can be viewed using Shift+PgUp but when the rc.S script finishes, init starts an agetty on tty1 which prints a login prompt. Then tty1 is no longer the console and Shift+PgUp cannot be used to scroll back through the boot messages. Any delayed boot messages do not have effective carriage returns so "marquee" across the screen, one following another, a line below.
Is it possible to leave tty1 as the console by de-configuring the tty1/agetty line in inittab, thus allowing Shift+PgUp to be used to scroll back through older messages and allowing proper horizontal alignment for delayed boot messages? I would try it but the inittab line x1:4:respawn:/etc/rc.d/rc.4 runs /usr/X11R6/bin/xdm and this grabs the first unused tty<n>. The xdm man page and xdm config file comments do not reveal whether it is possible to make xdm use a specific tty<n>.
Another solution may be something like the sysvinit binary that intercepts all console writes and then dumps them to log at the end of the boot process but if it were that easy or useful it would already be done and publicised (wouldn't it?).
View 14 Replies
View Related
Feb 15, 2011
I've spent some time trying to get my 3G card connection shared over WIFI and despite the number of sites out there I had a lot of problems putting it all together. So I wrote a small guide about it, but due to several issues (time/bandwidth) I can't retest it from scratch.I was wondering if someone could take a look at it and make suggestions or corrections.The idea is to take your 3G data card and turn your WIFI into an access point so you can connect other devices to it for internet access.
View 6 Replies
View Related
Dec 1, 2010
I posted a completed version of it a while back and just wanted to post the latest stable version. I'm using it as a pet project to teach myself proper BASH scripting, but also to help my wife get .lit e-books onto her Sony E-Reader since it seems to do a better job of converting the files than Calibre(For some reason some of our books won't convert in Calibre and they will with this). I've added some zenity windows to make it just a little more friendly in regards to selecting the file you want to convert. You no longer have to drag it into the terminal window and make sure you've got quotes around it if there's a space. It's also now completely BASH instead of python. I'm a "beginner" programmer/scripter, so some review, comments, and constructive criticism are welcome because everything I know I've taught myself with Google and experimentation.
To install it, just grab the tarball, extract it, make the files executable if they aren't already when you download them, and then run the install.sh file in the terminal. I tried to be very descriptive and informative in the changelog.txt and Readme.txt files as well so I hope those suit their purposes well.
P.S. If you're wondering about the versioning, I just adopted the same philosophy as the Ubuntu community and just made the date the version number. 10.11.30 equals November 30th, 2010.
View 1 Replies
View Related
Feb 21, 2011
I thought of leaving a comment below the story, but figured why bother. The main complaint appears to be about the appearance of the desktop, and the graphical installer "feels old." Then he goes on to recommend Trisquel instead as a "better Debian-based distribution" than Debian.
View 14 Replies
View Related
