Server :: Apache Does Not Have Permission To Modify Files In User Directory - SVN
Mar 30, 2010
I recently started using SVN with Apache for my web development, although I find it really annoying that I have to issue two SVN commands (one local, one remote) to update my web site. I have been looking into SVN post-commit hooks to solve this problem. The only problem is that apache does not have permission to modify files in my user directory... So here is how everything is setup. I am running Slackware 13 full install. There have been no installations overriding any of the default installs.
[Code]....
View 1 Replies
ADVERTISEMENT
Dec 3, 2010
Does anyone know how to modify permission on jail user. current jail user added to its /home/jail/*
How can I assign jail user(s) enough permission to access /opt, /var, or any other directories other than /home/jail/* ?
View 9 Replies
View Related
Dec 10, 2010
I'm trying to get Apache to run in a user's home directory. I changed the conf file so that Apache runs under the user and group "kiosk" and changed the DocumentRoot and Directory from the default to "/home/kiosk". Then I set Apache to start at boot (chkconfig --level 235 httpd on) and rebooted. When I checked, httpd is running as kiosk like it should (ps aux | grep httpd). However, when I try wget localhost, I get a 403 response back. If as root I call "httpd -k stop" and then "httpd -k start", then everything works exactly as it should (curiously, if I try using "-k restart", it still doesn't work). After this, httpd still shows as running as kiosk and if I check before calling start, it shows no httpd processes running as expected.
This only happens when I use httpd to stop and then start the web server. If I try to restart using apachectl I still get a 403 error. As an interesting aside, after I've used httpd, if I try using "apachectl restart" I get a "(13)Permission denied: Error retrieving pid file run/httpd.pid" error. This is all on a freshly installed CentOS 5.5 server. Why I'm seeing this very different behaviour from what I thought were just equivalent ways of starting Apache? And then what I could do to get it to start up and run properly on boot? One last item to mention is this isn't a permissions problem. I set the permissions to 777 to both the home and kiosk directories (and 666 to the web files) just to be sure that's not the problem.
View 4 Replies
View Related
May 18, 2010
I have a ftponly user "rom" in my box. This is used by our vendor to send files through ftp. When they send files the ownership of files are all the same as user name group created in this machine.But our application engineers use another user name "deb" to process these file. But as the owner of these file are "rom", they cannot process with their user. Manually they modify the user name and group and then they able to process.The group ID of the two users are different and its application dependent.how should the ownership will be modified automatically or is there any workaround or script to modify the ownership of these file for application user's?
View 5 Replies
View Related
Mar 19, 2010
Is it possible to somehow setup a secondary group of log files that log every action taken on the server where your average user wouldn't know that they're being logged. Perhaps if a hacker got in and messed around or something you'd be able to see what they did, but they wouldn't have permission to modify the file.
View 1 Replies
View Related
Feb 2, 2011
created a user but i forgot to change the home directory permission.so after user created when i go to the user and group mangement i cant see that permission filed related to the home permission directory.my purpose is to stop accessing other user to my home directory,how it can be possible??
View 4 Replies
View Related
Jun 13, 2011
I'm trying to setup an Apache server on my computer which will allow browsing of files in a specific directory and subdirectories, without needing any sort of authentication.
I've got the Apache2 server up and running through yast, and everything works fine as long as I try to point it to the /www/htdocs folder. However, I want to point it at another folder, which is on another partition. This partition is formatted as NTFS, if that matters at all (here's some background on some permissions issues I had with the NTFS partitions recently).
When I change the "Directory" setting in the Yast http server configuration utility to the directory on the NTFS partition I wish to use, attempting to access the server results in the following error:
Code: Access Forbidden: You don't have permission to access the requested directory. There is either no index document or the directory is read-protected. If you think this is a server error, please contact the webmaster.
Error 403
192.168.1.100
Mon Jun 13 23:43:29 2011
Apache/2.2.17 (Linux/SUSE)
View 4 Replies
View Related
Nov 8, 2010
I have a multi user system for my roommates and myself that has separate folders for each of us. I've got user authentication working with samba, but unless I set every file and folder readable/writeable by all users, I can't browse it or edit the files.This isn't ideal as the shares are open to other users access, so I'm hoping there's a way to keep folders at 750 and files at 660 while allowing samba users to browse, delete and edit.Also, the samba share is actually a mounted NFS share from another server. Both the NFS server and the Samba server have the same users/uid's. When a file is created from a Windows host via the Samba client, the NFS server's permissions do show that the correct user owns the files, but since the files aren't mode 666 but 640 I can't edit or delete the file.
View 4 Replies
View Related
Apr 15, 2011
Is it possible to copy files from directory of one user to directory of another user in linux?
View 7 Replies
View Related
Jul 16, 2011
look at this : Uploaded with ImageShack.us how can set permissions in linux like this? I want one user can delete files but can't modify them and ... in linux i have 3 group to assign read write and execute them. is ntfs flexible than linux file system?
View 4 Replies
View Related
Mar 5, 2011
Me and 2 others are working on a website (Bob, Mike, and Joe). We made a group called developers and each of us are in the developers group. The Apache server runs as www-data. When we upload files, the file owner is the users name and the group is "developers".
/etc/group has the following
Code:
www-data:x:33:
bob:x:1000:
mike:x:1001:
[Code]....
I have always just set everything to 775 and just called it good. Well I don't want to wake up to a Russian political message plastered all over the site. It's time I do things properly.
View 3 Replies
View Related
Jan 20, 2011
I am installing Big Brother on a CentOS 5.2 running the default Apache 2.2.3. When I try to access any web page I get the following error: Forbidden You don't have permission to access /bb/ on this server. Apache/2.2.3 (CentOS) Server at fmsubbnix Port 80 So far I have:
1) Set the Directory options to FollowSymLinks
2) Verified all directory and file permissions are at 755
3) Set permissions temporarily to 777 and received same error so I am assuming the issue is in a config file somewhere
4) in hhtpd.conf verified <Files ~ "^.ht"> is correct
5) verified the "default" directory is correct (/var/www/html)
I have read and tried several ideas in posts listed on the web but to no avail and am at a loss as to what to look for next..
View 3 Replies
View Related
May 26, 2010
I'm trying to do something like thisi created a group called www and made this group the owner of the directory/var/www/htmlso i can read and write to it.of course I've add my self to this group, but it seems i can't read and write.the syntax i used was something like chown :www /var/www/html.didn't workonly when i used chown samurai:www /var/www/html i could finally could create new file.the reason i don't want to specify the user name is because I'm thinking of a scenario when i need to give permission to a large group of ppl and don't want to do it user by user.
View 5 Replies
View Related
Apr 12, 2011
I have an apache installation with /var/www/bob as the document root and the only site served up. I have bob as the directory's owner, and he is able to upload his files to that folder via ftp (vsftpd on the server). When a browser tries to access the pages, it simply gets a 403 forbidden. The problem occurs when apache2 tries to access the files bob uploads. The www-data user (Apache daemon) gets permission denied when I try to cat bob's files in the shell, so it's purely a permissions issue. What I can't figure out is how to give the Apache daemon the ability to read bob's files while also making certain it does not have the ability to modify any of them.
View 1 Replies
View Related
May 12, 2010
I'm configuring Apache for the first time on this box (8.04 LTS) and Apache2 for the first time ever. "Out of the box" it runs fine and I get the "It Works" page okay. But I'd like to use the virtual site feature to direct Apache to a folder in my user space, and I keep getting errors.
When I point a browser at localhost, the 404 message is "The requested URL / was not found on this server." and the /var/log/apache2/error.log ends with "File does not exist: /htdocs.
Here's my config file from the apache2/sites-available folder:
Code:
I diff'ed this file with the default and the only differences are in the DocumentRoot line and the <Directory ...> line.
My public_html folder has permissions 755 and the index.html file is 644.
View 7 Replies
View Related
Feb 2, 2009
I have FC10 newly installed, and Apache is serving content from /var/www/ okay.
I'm trying to get Apache to serve web content from user's home directories. This is what I've tried with no success:
Uncommented 'UserDir public_htm' in /etc/httpd/conf/httpd.conf and commented out 'UserDir disabled'.
And...
Uncommented user directory section in /etc/httpd/conf/httpd.conf. It now reads as follows:
#
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#
[Code].....
I also tried setenforce 0 to temporarily disable SELinux until the next reboot. No luck. It doesn't appear to be an SELinux issue.
That's as far as the information available will take me. I still get URL 'Not Found' when I try to access http://192.168.0.2/~myusername/
setting up user home directory web access?
View 1 Replies
View Related
Mar 14, 2009
I want to enable User Directories in Apache. So in httpd.conf I set:
Code:
<IfModule mod_userdir.c>
#UserDir enabled // commented out
UserDir public_html
</IfModule>
Directory /home/kees is listed has the following file permissions: drwx--x--x 32 kees kees
Directory /home/kees/public_html has the following file permissions: drwxr-xr-x 2 root root
Directory public_html has two files: index.html and index.php, both with file permissions: -rwxr-xr-x 1 root root If I now try to open http://myhost/~kees/index.html (or index.php) in my browser I get a 403 Forbidden error. If I look in my error log I see the following messages if I first try to open the index.html and then the index.php file:
[Code]...
View 4 Replies
View Related
Jul 20, 2010
Is it possible for listing directory and files' permission into numbers?
Generally ls command shows directory and files' permission as follows;
[root:maestro:/home/ddisk_net]# ls -al
Total 44
drwx------ 4 ddisk_net users 4096 7월 20 10:40 .
drwxr-xr-x 21 root root 4096 7월 20 10:28 ..
-rw------- 1 ddisk_net webteam 5 7월 20 10:40 .bash_history
-rw-r--r-- 1 ddisk_net users 33 1월 22 2009 .bash_logout
[code].....
View 9 Replies
View Related
Aug 28, 2010
new to ubuntu and linux, and using Lucid 10.04 LTS ok, i'm trying to get XBMC going, and following a nice step by step instruction on wiki.xbmc.org, but now i'm stuck at this step... In Ubuntu the SVN Repositories are not automatically added. You must add them manually. First, download the SVN Repo Installer from: [URL] Extract it to the ~/.xbmc/plugins/programs directory. If this directory does not exist, run XBMC one time and then exit back to Ubuntu. The directory should now exist.
i ran xbmc once (after the video driver problem was solved, though it messed up my dual monitors, gotta figure that one out yet.) i got the zip file, it's in my downloads. now my newbness really shows... i can't find an 'extract' command for gnome, can't find the .xbmc directory using the file browser, can't figure out how to hunt for folders instead of files, and don't know how to look inside folders i don't have permission to, that is, i don't know if there's a 'sudo' like option for the file browser. i've been searching the forums, but without the correct search terms, i'm wading in an ocean. i really want to give ubuntu an honest try, but i feel like a foreigner. EDIT: btw, up to this point, the forums have been invaluable, you all are great.
View 2 Replies
View Related
Jul 13, 2010
I'm a new Ubuntu user, I just installed Ubuntu today and I'm loving it. But this issue has been driving me nuts all day, I've searched for hours for something like this and all posts were about external hard drives. I installed Ubuntu 10.04 on my MBP 13" then dual booted into Ubuntu. I can mount and access my MBP hard drive, but when it comes to the Mac home user files, I don't have permission to even READ.
How can I change that? I tried doing so by dual booting into Mac and changing the folder permissions and also making them shared folders but nothing worked.
View 1 Replies
View Related
Jan 13, 2011
I am administoring a few websites and the latest website to be deployed has a few "unable to check htaccess file, ensure it is readable, referer: " errors in the apache-error log.
That is fine, becuase the directory doesnt contain a .htaccess file.
Is there a setting whereby I can turn off this error ?
I dont want to turn off checking for .htaccess files because some directorys have this file and use it.
View 2 Replies
View Related
Mar 31, 2010
just thought i would throw this out there as a google search doesnt even come back with what i need. I have setup proftp with a mysql auth on a debian box. When i save files or try to modify them i get an error. Ie i dont have permission. When i look at the permissions for the files, it has a 2001 user permission and a ftpgroup as the group permission.
I want it to be ftpuser and ftpgroup with readable and writable permissions for the user and group. This is my second proftp box and i basiclly copied the config files over from the old box.
View 12 Replies
View Related
May 4, 2011
Is possible to make a folder permission like below?
-User can create files/folders in the shared folder.
-But the files/folders they created, cannot be delete/change by em.
(only can be delete by root users)
-Each new files/folders created will auto owner to root only.
View 4 Replies
View Related
Jan 6, 2010
I have a secondary disk which holds a /home directory structure from a previous install of Linux. I installed a new version on a new primary drive and mounted this secondary drive as the new /home. Problem is, even though the users are the same names and I can access the home directories for the users, I cannot login directly to their home directories, as I get the following error: -
Code:
login as: [me]
[me]@[machine]'s password:
Last login: Wed Jan 6 18:34:33 2010 from [machine]
Could not chdir to home directory /home/[me]: Permission denied
[[me]@[machine] /]$
Now, since the usernames are correct and the users are in the passwd file with the correct home directory paths, could it be user ID's that are different or something else? It's not as though I cannot access the home directories for the users, simply that I cannot log directly into them from a login prompt.
View 14 Replies
View Related
Jun 12, 2011
why i m unable to edit the files under root directory of apache ?and how to fix that plz tell me ?
View 3 Replies
View Related
Apr 20, 2011
I'd like to clarify about the permission. 1 ) When I transfer the entire directory from one server to another using "rcp" , the permission still remain as source directory or inherit from the destination directory in different server? 2 ) I have one issue. When I transfer using one server to another server using "rcp" permission was changed at the destination from "770" to "750" at the destination director
View 1 Replies
View Related
Jun 12, 2009
With F11 installed Apache is having permissions issues reading files out of the html directory. Only wants to work with permissions set to read for other. [Thu Jun 11 23:25:28 2009] [error] [client 127.0.0.1] (13)Permission denied: file permissions deny server access: /var/www/html/index.html Tracked down the permissions issue. Is there a good reason not to change the group to apache and remove world read?
View 1 Replies
View Related
Dec 12, 2010
I would like to change the permissions for a directory and all files inside the directory how do I do this? The website is located only on my local network so I am not worried about security. Also what would be the optimal permissions for running wordpress.
View 1 Replies
View Related
Jan 9, 2010
I have configured samba server.My requirement was that the path which i have to share was /srv/www/htdocs.With this the shared path for developer user was /srv/www/htdocs/projects.
So in the smb.conf file i made the entries as following:
After that root user was able login to both /srv/www/htdocs and also project folder and developer was only able to login to projects folder.That was according to my requirement but now the problem is that when developer is trying to edit any file in projects folder he is getting error that you dont have permissions to change this file.But developer should be able to edit any files. What changes i need to do now.
View 3 Replies
View Related
Jan 7, 2010
I have proftpd @ Ubuntu 9.04 server. It authenticates users via Auth file, e.g. those are "FTP only" users, not real linux users. Each of them has assigned home dir in the same auth file. They also get Chrooted into it, e.g. default dir is ~ in proftpd.conf They can connect and download files successfully, however, they cannot upload anything or create directory: 550 permission denied error.
When I login via ssh and change user to proftpd user, I can create directories in that particular place, so I guess it's not Linux permissions problem? Or is it? /var/log/daemon.log is the place where proftpd stores its logs, but I cannot find anything relevant there
View 5 Replies
View Related
