kmod-nvidia reflects 180.25 version but when I try 'service akmods restart' the check defaults to the original and installed 2.6.27.12-170.2.5.fc10.x86_64' and will not recompile for the newer? All appropriate packages are installed. Running in level 3 as X server won't launch.
View 3 Replies1) Whenever a new release of Ubuntu comes out, I've always done a full replacement (Booted up live CD, formatted / and formatted /home) to ensure there's zero incompatibilities, including configuration files in my /home. That has, finally, gotten annoying and I was wondering what the actual chances of a configuration file causing problems was in the 6 months that Ubuntu was released in. Also, special consideration for Gnome 3 (aka gnome-shell) coming out with the current gnome configs.
2)Any way to remove unneeded config files automatically? I don't always use purge when I remove a package just in case I want to reinstall it, well weeks later I def don't want it, is there an apt or dpkg command that will automatically remove them after the package is gone? I know autoclean and autoremove handle orphans and unneeded .deb's
3) How stable is Sidux in reality? Ran it in a VM and had a few errors every so often while using it, but i wasnt sure how much of that was the fact it was a VM. Some say its stable enough for daily use, some say it breaks every other day
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedI am configuring a third party repo (Project fog).Actually i need to know ,How to edit config.sh
The error i am getting is > Checking package: php-gettext...Failed!
The manual say that .
It is a part of the base PHP package. You will need to edit /lib/redhat/config.sh & remove php-gettext from the packages list on line 22 .
I have a Fedora 11 into a virtual environment (ESX) I remove all interfaces but with the command system-config-network I see my previous configuration How can I remove/clear all my network configuration to start another time to config?
View 9 Replies View RelatedI just updated from Fedora 8 to 10 to 11 today. When I run system-config-display I get the following message:
Traceback (most recent call last):
File "/usr/share/system-config-display/xconf.py", line 33, in <module>
import rhpxl.monitor
ImportError: No module named rhpxl.monitor
If I comment out that line, the next one fails, and so on. I installed a newer package, 1.1.3-2.fc11, because I thought maybe the installer didn't put it on and that behaves the same. Why this won't run? I would desperately like to use my widescreen monitor and I'm hoping that 11 will finally support my intel graphics correctly.
After an upgrade (preupgrade) from Fedora 12 to 14, system-config-boot opens from the menu and displays the right information but does not change grub.conf. I have searched the forums and found nothing like this. It worked before the upgrade. I have forced a new install of system-config-boot. I can change grub.conf manually. There are no SElinux messages that I can find. It would be nice to get the gui working.
View 4 Replies View RelatedWhich directly is accessible during the %pre section? I try to use wget to retrieve a file from FTP to /root but after the machine is build, I don't see that file in /root directory.
View 3 Replies View RelatedBeen running Fedora for a while now, iterating up through versions to 12. Decided to to a clean install upgrade to 14. Apparently, bug mistake. Everything seems to be progressing fine, but after 'transferring install image to harddrive', the 'Starting Install Process' fails withsystem-config-lvm-1.1.15-1.fc14.narach.rpm cannot be opened.I have no idea what to do with this. I've reburned the install disk a couple of times (and checked the HASH) -- no apparent problems with the install media.Tech details: x86_64 install on a multi-pro box with a 3ware raid 5 controller (5 disk). I've never run LVMs. Two simple hard partitions (/ and /home). Fedora 12 installed with no problems (as did every other version of Fedora <=12).---------- Post added at 12:29 PM ---------- Previous post was at 11:54 AM ----------Some additional information:1 tried Fedora 13 -- wouldn't even recognize my disks. Installer hung at trying to find basic storage. Not a good sign2 tried my old Fedora 12 install DVD -- again, worked like a charm. Expect that F12 repos are now closed.
So, it seems as if some 'change' between F12 and F13/14 has made some part of the install process choke on my 'hardware' (I'm guessing something related to 3ware RAID card). ---------- Post added at 01:51 PM ---------- Previous post was at 12:29 PM ----------I just tried CentOS 5.5 (x86_64). Also installed fine. For some reason, Fedora >= 13 absolutely won't let me get past the problem noted in the OP. I suppose I could go with CentOS (for long EOL support), but I need some of the newer compiler/dev libs in Fedora 14 for some projects I'm working on.
1- how I can deactivate selinux and the root password on fedora 15?
2- I can't use copy, cut past in the GUI !!
3- even with (su -) I can't modify files like shadow or config !
When configuring a custom kernel using fedoraproject.org instructions, the make menuconfig options for LIRC are not in the .config file anywhere. I checked the kernel tree and all the files are there in the .../drivers/input/lirc subdirectory (I need the lirc_dev and lirc_i2c drivers). I reset the .config to its original settings to make sure I didn't mess up. I also grep'ed the .config file for any LIRC related settings, none found. Also I'm not getting any sound from the radio-aztech driver.
View 1 Replies View RelatedI have 2 harddisks 1 tb and 160 gb. In 1 tb fedora is installed. In 160 gb windows is installed. 1 tb is the master. 160 gb is not being detected. How to edit grub.conf file to edit the menu?
The content of grub.conf is
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all kernel and initrd paths are relative to /, e.g.
# root (hd0,1)
# kernel /boot/vmlinuz-version ro root=/dev/sda2
# initrd /boot/initrd-[generic-]version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.35.6-45.fc14.i686)
root (hd0,1)
kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=bfc7d406-5ae3-4335-a2d8-37472dcfa7dc rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img
title Other
rootnoverify (hd1,0)
chainloader +1
I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies View RelatedI install fedora on my usb-hdd. Sometimes i boot it from real machine, sometimes i boot from virtual machine (kvm). When I boot from real machine, hdd driver is usb-storage, when i boot from virtual machine hdd drivers are ata_generic and pata_acpi.
Everytime i update kernel, mkinitrd only create initrd image contains only hdd driver current running, and I must recreate initrd manual with all preload hdd driver. How to config fedora to everytime update kernel, mkinitrd can make initrd image with all hdd driver I need?
I install fedora 10. But I don't have internet connection, when I Run add or remove software nothing listed and I couldn't remove any package.And when I want to add any rpm package, my fedora does't install that.How can I add or remove software in fedora without internet connection.
View 4 Replies View RelatedI didnt know where to ask this question but if anyone could direct me I would appreciate it.I would love! to remove the fedora Boot image progress bar when I choose to run Fedora, Is it possible to have this removed and just show my the inner working's like it did with older linux distros? where it has the lovely
blahBlah [OK]
blahBlah [OK]
blahBlah [OK]
[code]...
I want to make the system a bare minimum, What is the best way to remove everything related to LVM? I know during installation I can do that, but what if I have already installed it? What I do not like the most about LVM is the extra rd_* parameters passed to kernel, being a desktop I do not see any benefit in the complexity it brings. I want to make it a minimum so I can use it in an embedded system, and am stripping out the most useless first. In addition, btrfs being the new default pretty soon I guess devs also realized the disadvantages of LVM outweigh the advantages.
View 2 Replies View Relatedi installed from live cd. recently installed PackageKit, because I didn't see any System/Admin/Add-Remove-Software menu. I still don't have it after installing PackageKit. What do I need to do to get it ?
View 1 Replies View Relatedlist step by step instructions on how to remove Window's 7. I have a dual-boot system right now. I tried checking around on the web but most topics indicate how to remove Fedora instead of Windows 7. If this topic has already been discussed, could someone please post the URL.
View 7 Replies View RelatedI'm trying to install KDE with Add/remove software. There are many files listed(artwork, corefiles, network appplication, workspace...etc) on the right part of the screen when i click on KDE desktop. I installed workspace but i'm unable to see any changes to my dekstop environment. Do i have to install all the files in the list. Please help. My last option would be to go for #yum groupinstall kde-desktop.
View 7 Replies View RelatedI have an Thosiba Laptop, with an Seagate 100 GB SATA Hard Disk. I have installed Windows XP and Red Hat on my laptop, and all works fine. I want to remove Windows and Red Hat from the Laptop and only use Fedora, but when I am trying to install Fedora the installation wizard can not detect th SATA Hard Disk. My Red Had sees the HDD as:
[code]...
I have a dual-boot system with XP and Fedora. I had to reinstall XP a while ago. After XP reinstallation, to regain access to Fedora, I ran Fedora installation DVD. It told me that the hdd had a "loop file system" and that I had to reinitialize it. I chose "ignore", "upgrade" and then "Create new boot loader configuration". Everything works fine now, but when I tried to install F11 from a live cd I discovered that I couldn't. It can't edit the lvm part (nor delete it). The only things possible are to reintall F10 with the DVD that created the lvm in the first place or install F11 using preupgrade (the lvm remains ext3 so preupgrade can't edit it either).
My question is: how can I get rid of the lvm part without reinitializing the hdd (I don't want to lose the data on the other partitions). I want to reinstall Fedora but without lvm.I heard something about "fdisk" and "lvremove", but I have no idea how to use these, so I would like a detailed solution (something close to a tutorial).
Thinking of a re-install to remove LV and use Ext4 only. [Root is too large] Can I back up Home from the LV and move it to an external drive. If so will I be able to reinstall and Custom partition so I can use Ext4 and then copy the Home files back to my new Home partition. I have only a small knowledge of LV systems so just want to be carefull.
View 1 Replies View RelatedI want to install new php so i need to uninstall previous version of compiled php 5.3.3.
make uninstall is not working showing make: No rule to make target `uninstall'. Stop.what should i do to remove previously installed php completely so that i can install a new one??
Installed Fedora 14 32-bit with gnome on an older laptop for my son (want to start him early learning multiple OS's). the wireless card is not working (don't know why yet) but in the mean time I wanted to just add/remove software right from the installation media (full DVD). However, when I open system -> administration -> add/remove software, nothing is available. Trying to enable any of the sources listed under software sources tries to use the internet, which I don't have up yet and I don't see any option to add a new source... although I don't know why adding software from the install media would not be an available option by default?So how do I add/remove software from the install media using this add/remove software management tool? I don't want to have to browse the dvd directly for packages, I want to browse by the nice categories and have any dependencies taken care of for me... and the searching capability is nice to
View 10 Replies View RelatedI now want to review and possibly remove some software with the Add/ Remove Software Tool. When I try to locate installed packages I get an error that reports 'No Package Cache Is Available'. It also says 'the package list needs to be rebuilt', 'this should have been done by the backend automatically'. When I click on 'More Details' it says 'Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify it's path and try again'.Can anyone please explain what's going on, and what I need to do to get the package list rebuilt?
View 14 Replies View RelatedI just installed Fedora 10 on my machine that have windows xp already installed on it. I chose "Remove all partitions on selected drive." by mistake. Is there a way to get back windows xp?
View 3 Replies View RelatedBeen away for awhile (Fedora 5 or 6 was what I last ran). Just downloaded Fedora10 and installed it on a drive here, running great, looking slick. What drove me back to Fedora (Linux) is my need to create a simulated webserver to locally test stuff without messing up my live site. I had successfully installed php and mysql, using the specific versions my host uses. I then downloaded the RPM of the specific apache instal, followed the install directions and ran into a snag. Last step, says, "$ PREFIX/bin/apachectl start". I did that and received an error. Tried just typing apachectl start, and it worked. Upon my surprise it loaded Apache 2.2 (mine was a 1.3 release), and of course is Fedora-branded.
My questions are as follows:
Do I know somehow how two versions of Apache on? How do I start up the 1.3 one if so?
If not - How can I remove the 2.2, and what will have become of the 1.3 I installed?
Want to remove some unwanted icons from my screen but can't seem to figure out the best way.
View 2 Replies View RelatedI had a fairly smooth upgrade process using PreUpgrade on my main workstation, but I still have a huge bunch of fc12, some of which have fc13 analogs installed, some of which don't (a total of 317 packages). Also, I still have the Constantine gdm theme, probably as a symptom of these lingering packages. Can I just yum erase these? Do I need to check which have analogs in fc13? I don't know which step of the upgrade I forgot, but it seems I'm stuck somewhere in between, although
Code:
joel@localhost: ~> cat /etc/fedora-release
Fedora release 13 (Goddard)