Fedora Installation :: Installing - Live Cd Goes To Dark Screen
Feb 24, 2009
I'm kind of new to linux, but even I shouldn't have this much trouble, because I've been reading faqs like crazy and tutorials, but I just don't understand what's going on. I'm installing Linux Mint on my old machine now and it's installing good, but I try to install Fedora 10 and I've been having problems. It works fine in VMware, but when I try to load it from a live CD to install into the drive, on the initizialize process it say's "failed ata something something", then it goes to a bar and then it goes to a black screen and it hangs there. I did 5 md5check sums on the same iso, I'm not sure what's going on?
I have a Gateway NV59C09u laptop, I tried running both maverick and the latest beta of natty as live usb's to no avail. It boots fine, but at the first screen the light is so dark that I can't really read anything nor see the mouse pointer, I can just barely make out a window-looking thing. Trying to increase the brightness using my F-keys doesn't do anything.
It's gotta be some kind of graphics related issue, because booting the alternate iso works fine. If I could figure out a way to boot the ubuntu-desktop live image via a different video driver that would probably work, but I'm not sure how to do that (ctrl+alt+f1 does nothing).
Running windows xp on dell laptop. Installed ubuntu 10.04 all was working fine. Had to format hard drive and re-install windows Xp. when trying to install ubuntu 10.04 i get a dark screen.
I'm trying to install ubuntu alongside Windows 7 on a HP Pavilion DV3. When I reboot I'm given the option to either boot into windows or ubuntu (this is after running the wubi program from the ubuntu website); when I select ubuntu it says that the installation will continue but the screen then goes very dark like the brightness has been turned right down. In the center of the screen I can faintly see the word ubuntu. I've tried using the hot-keys on the laptop to turn the brightness up but this doesn't work. I've also tried installing from CD but his doesn't work either and I get the same problem. This is my first time installing ubuntu so I'm not familiar with how the installation process works. Also if any other details are needed I'll be happy to give them.
I have a desktop with AMD Sempron 3000+, 1.2GB RAM, VIA S3G Unichrome Pro IGP, VIA SATA RAID controller based disks, PS/2 mouse and keyboard running Windows XP. Wanted to move to years ago favourite (linux based systems), I downloaded Ubuntu 10.04 for i386 and am trying to install both using CD as well as USB. After the Ubuntu start-up menu for installation, I select install Ubuntu option, turn off 'quiet' so that I can see what happens. The screen goes blank dark with a flashing cursor at the top.
In the kernel messages, the see that it has detected the processor, set the clock, assigned the PS/2 keyboard to input3 and then says: [1.911624] isapnp: no plug and play device found After this, the system hangs. Keyboard doesn't work.
Despite being warned from a friend of mine who works for Intel that the new version of Ubuntu 11.04 sucked? I upgraded from 10.10 which worked perfectly fine and did everything that I wanted it to except work with my COBY MP3 player which is what I hoped 11.04 would do. It all worked great until I rebooted. I previously had the main screen on the left where all of the menus are and the right screen was the 2nd monitor.
Once it rebooted it let me login and loaded the desktop but the main screen is now on the right with that stupid application bar going up the side, all of my folders, etc. are all there but NOTHING is clickable, even the icons up in the right corner where you logout, etc. will not do anything other than highlight that you have clicked on them, the hard drive light flickers for a few moments then nothing.
Also the left hand screen is completely blank unless I move the mouse cursor through it. If I just leave the computer sitting there eventually the screens go dark and the monitor lights start flashing like it is supposed to but if I wiggle the mouse the screens come back on and the mouse is there but there is no login prompt to let me log back in. Pardon my French but this OS is a piece of <bleep> and sucks just like I was told.
I've installed Fedora 13 x86_64 and am not able to hibernate (though suspend works fine). This is the case either with or without the proprietary Nvidia drivers from rpmfusion. When I click System -> Shut Down -> Hibernate, the screen just goes dark. Moving the mouse activates the display and the password confirmation box appears. Judging by the disk activity light, nothing is written to disk. Swap space is configured correctly.
Looking at the last few lines of /var/log/pm-suspend.log I see this:
It looks like grub (or the absence of grub.conf) is interfering. Problem is, I'm not even using Fedora's grub to boot the system. I'm dual booting with Ubuntu 8.04 and am using that grub. The section from that grub's menu.lst is:
But of course Ubuntu 8.04 is pre grub2 so how do I satisfy Fedora's grub.config without messing this up?
Due to a combination of factors, if installing from the Live CD, you must have at least two partitions available. One will be a small (around 200 MB) /boot partition. The / (root filesystem) partition must be formatted as ext4 while the /boot partition must be formatted as ext2 or ext3.
The normal installation CD set and DVDs don't have this issue.
If you choose to install the Live CD and don't follow this scheme (you can, of course, have additional partitions besides /boot and /), the LiveCD won't install.
I boot it up using the live cd then try to install it to my hard drive. I want to dual boot Vista and Fedora, so I've created another partition.However I'm having trouble whilst installing. When I get to the stage to select where I want to install it I choose the "Custom" choice. It is then also obvious what partition to choose as one is much smaller. But no matter what options I pick for it, it brings up an error. >_<
I know this is probably a terrible and confusing explanation, but I'm a huge newb to linux and especially fedora.If you want a better explanation please ask and I will try to deliver.
Been a while since I've been on here, but I was using Fedora 12 for the longest time and only recently started having problems. I kept getting errors and pop-up dialogs telling me to run yum-complete-transaction, which I tried as root many times. It would then give an error that it couldn't locate the repository and such. So, I looked through all my yum config files and changed a few things until I FINALLY got the command to do something, only it did all kinds of strange things as I was running low on EXT3 disk space and using old Windows' partition to store a lot of things on.
Now, I backed up all the /home directories and files as well as /root, just in case this didn't go smoothly and I still ran out of disk space. If I had the money, I'd buy a storage stick and just back up everything, but that's not an option at the moment. Now I have a crippled version of XP (pretty much useless from a trojan, even though I had McAfee AND Windows Defender running), and half of Fedora 12 with 2 different boot images! When I first did this, I used a 10G partition to install Fedora, which was plenty then. What's left of Win still resides on about 65G of space, but I have a lot of files there I want to keep. Fisrst thing I want to know is, should I look anywhere else on the Fedora disk to find files I may need, just in general? There's still a LITTLE space on the drive to back up stuff if I need to.
Second, while I still had enough to work with, I managed to download and burn a F14 Live CD, which is running now. I saw the option on the desktop to install it, and can get my config files and such from the backups if need be. I do NOT have a DVD burner, so if I have to I can use regular 700MB CDs, but only if they are available.The next thing I need to know is if I can install F14 from the web, without having to download any more ISOs, (again, assuming they are available). I know all my DSL settings so that's not a problem, I just need to find out if I can install it that way before I go clicking that icon. Anyone with experience with this would be helpful. I'm ready (MORE than ready) to go through with it, I just don't want to get "stuck" once I start the process. My download rate is around 200k/sec, so it's going to take some time no matter which way I (can) go.
Got NVidia GeForce 6200 TurboCache videocard. The free nv driver does not work with this card. Tried to get a screen with boot param: xdriver=vesa. Does not work: gives a black or blue screen too. start the live cd with vesa?
I am unable to boot my laptop in the usual way. The fedora emblem in the centre of the screen appears and starts to turn from white to dark blue in the usual way. When it is almost complete it stops.
In order to make the machine boot i hit escape and a message says leaving interactive startup mode. At this point the machine continues to start up.
When i do manage to get it to boot i get the following message repeated many times:
I should also add... The laptop will not close down, once i click switch off the screen turns blue and displays the fedora emblem in the centre. At the top right text says "Shutting Down" but at this point the system hangs.
I've had Windows XP installed on a Dell Inspiron 6000 laptop with 1 gig of ram and 70 gig hard disk. Today I decided to install Ubuntu 10.04 desktop edition to ext3 partitions I made on the laptop's hard disk. The Ubuntu installation went fine, and Ubuntu was up and runnning. Then for fun, I checked the available WiFi networks in this apartment building. Six were secure but one WiFi was open, so I clicked it out of curiosity. Within seconds, my laptop's 15-inch screen went super-dark, nearly jet black.I couldn't read anything on the screen. Pictures and words were still on the screen, but just way too dark to read or to see with any clarity at all. I don't have a WiFi card in the laptop.Instead I use Verizon's usb727 air card on Verizon EVDO Mobile Broadband (3G)
I don't know if the free Wifi network hosed me in some way with a nasty trick (I don't have a WiFi card in the laptop--just the usb727 dongle which is an EVDO aircard), or if it was just coincidental that the screen went super dark seconds after clicking the open Wifi network in Ubuntu's network manager applet.When I reboot, I don't see anything anymore, not the POST, not Windows XP booting up, or Ubuntu booting up. The only way I see anything now is to connect the laptop to an external monitor using the laptop's blue video connector. And even then, I still can't see the boot-up POST process, or the BIOS screen.I can only see Ubuntu or Windows XP after they've finished loading, and only on an external monitor. Did the new installation of Ubuntu hose my Dell Inspiron 6000 laptop's screen, or was it the Wifi network, or did the screen just coincidentally go bad minutes after I installed Ubuntu and seconds after I clicked the open Wifi connection?
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
Wanting to try F11 out and having an issue straight off the bat (perhaps I should see this as a sign of things to come and stop here!).I grabbed the live cd last night and burnt to cd OK (I'm not a noob at stuff like that); the cd boots as expected and I'm presented with the initial logon screen; I click to log in as Live System User, the "Other..." option vanishes but then nothing happens from there.I've left it for 20 minutes so far
I'm struggling a bit to install F11 on my laptop. When I put in the cd, i get to the menu. I elect to boot into the live cd, then my pc reboots and the menu comes up again...
i recently update my linux ubuntu 10.10 when i update it and restarded it my os doesnt work anymore , my screen is also blinking and a dark screen background , what happen to my os ?
Im trying to install fedora 11 from the live CD and when i get into the CD meny where it says "boot" and "press tab for boot options" i press enter. then a bunch lines flash across the screen with a lot of error messages. then the fedora loading bar at the bottom loads. hangs for about 1 minute at the very end. then the GMD screen appears. But the GMD screen is all out of place and its patchy as if my graphics card was causing some kind of error
I am completely failing to boot the Fedora 13 i686 live CD (MD5 check OK), in every case after the progress bar at the bottom completes I am presented with a garbled screen. My system has:
Motherboard: Asus MX-M2V Graphics card: Gigabyte nVidia GeForce 7600 GS 2GB RAM, AMD64 dual core, etc.
Some websurfing this might be a graphics option and I have tried adding different commands to the boot option before the "quiet" namely:
I'm using the shiki colors theme from the repos right now. "Shiki-Noble" to be specific. When typing something into Firefox's URL bar the internet addresses have got a dark font color and are hard to read on the dark background. Here's a screenshot: FF.jpg
I've had similar issues with other themes and Firefox's URL bar before.
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
and am coming from XP/Vista, loving it so far. But there is one problem I am having. After about 10-15 min of me not typing or moving the mouse, the screen dims and then goes to a screen where it asks for my password. This is getting very annoying while I am watching videos. How do I get it to stop doing this all together, I want to be able to leave my brother/friends on my computer and not have to come in every 10 min to type in my password
Im trying to install fedora 10 on the ps3 but i get a blank screen after the media test question, i tested the media in this case the CD and it says it has no errors but when it goes to install it switches to a blank screen and gets stuck. Can anybody help me, or tell me what im doing wrong. Steps that i taken.
1.Download the ppc version of fedora10. burn the ISO-image using the lowest possible setting. 2. i made a foder in my usb stick called PS3 and inside has another folder called otheros then inside it has the file otheros.bld 3. formatted the ps3 using the xmb. to 10 gigs for the other OS. 4. install Other OS using the usb stick that i made, install successful. 5. switch to other OS, using the XMB through systems settings. 6. Next I see a cd , i click on it with a mouse, see two penguins two options install 32 bit or 64 bit, i choose 64 bit. 7. then i get a media test question , choose skip and loads from CD. 8.Switches to blank screen and nothing else happens.
Just upgraded to 10.04. Screen is now unusable. It's like looking at it through a blue filter. It seems to be averaging the brightness. if there is a large dark area of screen real estate the paler sections getbrighter.The very bizarre thing is, if I switch user, whilst the theme is different, the brightness problem is gone...
Just installed 11.04 (Natty). Graphics card is Radeon 9200When I enable Cube in the compizconfig settings manager and rotate the cube, the cube goes almost black. This happens with both drag and keyboard rotate. The background is fine. Everything is defaults and no other effects are enabled.Also, the entire screen goes dark when "opacity when not rotating" is set to anything but 100%.This worked fine with with my previous version 8.04, though I think it used a proprietary driver.Questions:Should I be using a proprietary driver this card? Apparently you have to install a long list of packages first: XFree86-Mesa-libGL libstdc++ libgcc XFree86-libs fontconfig expat freetype zlib
i have upgrade ubunto 9 to 10.04 so that in log in section there is a KDE session appears. when i log on in KDE then it will came a new KDE screen with drive icon and setting icon also desktop icon.. unfortunately i click on there and these desktop screen disappear.. so how to do for come back KDE in right position.Now when i login in KDE it will show total dark screen.
When my laptop is running of the battery the screen goes fairly dark, I don't like this, I've changed the power settings to try and stop it (unticking the reduce backlight) but it doesn't do anything.
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
I am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
