Fedora Installation :: Options For Installing 14 From Live CD?
Feb 17, 2011
Been a while since I've been on here, but I was using Fedora 12 for the longest time and only recently started having problems. I kept getting errors and pop-up dialogs telling me to run yum-complete-transaction, which I tried as root many times. It would then give an error that it couldn't locate the repository and such. So, I looked through all my yum config files and changed a few things until I FINALLY got the command to do something, only it did all kinds of strange things as I was running low on EXT3 disk space and using old Windows' partition to store a lot of things on.
Now, I backed up all the /home directories and files as well as /root, just in case this didn't go smoothly and I still ran out of disk space. If I had the money, I'd buy a storage stick and just back up everything, but that's not an option at the moment. Now I have a crippled version of XP (pretty much useless from a trojan, even though I had McAfee AND Windows Defender running), and half of Fedora 12 with 2 different boot images! When I first did this, I used a 10G partition to install Fedora, which was plenty then. What's left of Win still resides on about 65G of space, but I have a lot of files there I want to keep. Fisrst thing I want to know is, should I look anywhere else on the Fedora disk to find files I may need, just in general? There's still a LITTLE space on the drive to back up stuff if I need to.
Second, while I still had enough to work with, I managed to download and burn a F14 Live CD, which is running now. I saw the option on the desktop to install it, and can get my config files and such from the backups if need be. I do NOT have a DVD burner, so if I have to I can use regular 700MB CDs, but only if they are available.The next thing I need to know is if I can install F14 from the web, without having to download any more ISOs, (again, assuming they are available). I know all my DSL settings so that's not a problem, I just need to find out if I can install it that way before I go clicking that icon. Anyone with experience with this would be helpful. I'm ready (MORE than ready) to go through with it, I just don't want to get "stuck" once I start the process. My download rate is around 200k/sec, so it's going to take some time no matter which way I (can) go.
View 4 Replies
ADVERTISEMENT
Jun 10, 2009
Due to a combination of factors, if installing from the Live CD, you must have at least two partitions available. One will be a small (around 200 MB) /boot partition. The / (root filesystem) partition must be formatted as ext4 while the /boot partition must be formatted as ext2 or ext3.
The normal installation CD set and DVDs don't have this issue.
If you choose to install the Live CD and don't follow this scheme (you can, of course, have additional partitions besides /boot and /), the LiveCD won't install.
View 1 Replies
View Related
Sep 12, 2009
I boot it up using the live cd then try to install it to my hard drive. I want to dual boot Vista and Fedora, so I've created another partition.However I'm having trouble whilst installing. When I get to the stage to select where I want to install it I choose the "Custom" choice. It is then also obvious what partition to choose as one is much smaller. But no matter what options I pick for it, it brings up an error. >_<
I know this is probably a terrible and confusing explanation, but I'm a huge newb to linux and especially fedora.If you want a better explanation please ask and I will try to deliver.
View 14 Replies
View Related
Feb 24, 2009
I'm kind of new to linux, but even I shouldn't have this much trouble, because I've been reading faqs like crazy and tutorials, but I just don't understand what's going on. I'm installing Linux Mint on my old machine now and it's installing good, but I try to install Fedora 10 and I've been having problems. It works fine in VMware, but when I try to load it from a live CD to install into the drive, on the initizialize process it say's "failed ata something something", then it goes to a bar and then it goes to a black screen and it hangs there. I did 5 md5check sums on the same iso, I'm not sure what's going on?
View 2 Replies
View Related
Apr 6, 2011
been trying to get linux installed on a troublesome laptop for 48 hours now without any luck so thought I'd post here as my last option.
I've tried installing 10.10 desktop, 9.04 netbook remix and just this minute 10.04 netbook versions of ubuntu, as well as other versions of various linux distros.
I woke up this morning and burnt 10.04 netbook to CD (not usb) as I wanted to put it on an old laptop with max resolution of 1024x768. I put it in an external CD drive and it boots up to the options screen on the Live CD, where you can choose to 'try Ubuntu netbook without installing' or 'install ubuntu netbook' etc.
The problem is, I can't click (press enter) on any of the options. The same problem arose with earlier versions, i.e 9.04 netbook remix Ubuntu.
Laptop model: Compaq Presario R3000.
View 6 Replies
View Related
Jun 18, 2010
I have an Eee PC with a dead Hdd. I brought it back to life by installing Ubuntu 10.10 on a 16GB SD card. It works 100% but is sluggish.Now I am wondering, from the standpoint of reducing SD card access and writes, would it have been better to create a Live Disc on the SD card with persistence options? What I am thinking is that a Live Disc is designed to run out of RAM, and would thus reduce the activity on the SD card. The only thing this netbook will get used for is the internet. It is a netbook, so the performance is limited, but as far as netbooks go, it is top of the line with dual core and discrete nvidia graphics.
View 1 Replies
View Related
Aug 1, 2009
I'm struggling a bit to install F11 on my laptop. When I put in the cd, i get to the menu. I elect to boot into the live cd, then my pc reboots and the menu comes up again...
View 11 Replies
View Related
Jan 30, 2010
I have a LiveCD (DVD with many linux versions on it) and no other software on my computer at the moment. The computer specs are as follow:
When I use the live cd I get the following message: Cannot find root file system
I have tried the suggestion along the lines of:
Then it either goes back to Bash or I get "Kernel panic - not syncing: Attempted to kill init"
Then my install just freezes there and I need to restart my computer.
View 5 Replies
View Related
Aug 28, 2010
I am trying to install Ubuntu 10.04 from a USB drive but every time I reach the option for changing the keyboard layout and press forward, it seems to get stuck. That is, the mouse icon shows that it is loading but nothing ever happening. I even went for a shower, came back and nothing.
View 1 Replies
View Related
Jan 16, 2011
I already have Ubuntu 10.041 and windows xp installed as dual-boot.I am installing another version of Ubuntu in a logical partition.On the last page of the live install guide, there are advanced options.There is a check box next to install boot loader.I already have boot loader from previous Ubuntu installation, correct?What were to happen if I un-check this box?The reason I ask is there were grub updates from previous Ubuntu install.
View 8 Replies
View Related
Jan 23, 2010
So, I have an old laptop that used to have windows/ubuntu until the drive got fubarred (no physical damage). I shoved the laptop as side as I didn't use it much anymore (it's an old, loud 2.4GHz desktop p4 in a dell--mostly toshiba--laptop. pcmcia atheros based wifi card and an ATI m6 graphics card. Laptop was new back in 2002-03 maybe).The Cdrom drive had died a while back, and it's not worth buying a replacement. The bios doesn't support boot to USB. What are my options for getting Ubuntu on there (9.10 preferably)? The drive has been formatted already, so there is nothing to boot into right now.
I can pull the drive and hook it up to my desktop (windows 7 machine only right now) via USB, and partition it from there, but I'm not sure how to get the installer on there. The MBR of the laptop drive will also have to be rewritten. Is there a way I can create a dos partition, load it with files, and start a linux install that way (maybe with grub4dos or something)?Or can I somehow boot into an ISO image on a partition?The only other thought I have is creating a floppy disk that will allow a network boot, but I haven't looked into that. I basically just want something to bring with on vacation that I can get online with. Browsing from the phone leaves a little bit to be desired.
View 4 Replies
View Related
Mar 18, 2011
I used to have Ubuntu 10.10 and Windows 7 RC on separate partitions and I could choose to boot into either. Today I installed Windows 7 Enterprise trial version over the Windows 7 RC partition, and lost the boot screen. Reboot goes to Windows automatically. How can I get the boot options back to launch Ubuntu?
View 4 Replies
View Related
Jul 24, 2010
I installed 10.4 on my Satellite Pro via CD replacing XP. Screen resolution is now only 800x600 which fills only 3/4 of available screen space and there are no greater options in System Preferences Monitors. It is also operating rather slower than the previous OS, maybe these two issues are connected? I have checked Administration for any required Proprietary Drivers. There is just one for a modem which is activated. During installation I aborted it then closed down and restarted, which may have affected the process?
View 8 Replies
View Related
Jul 22, 2010
I have a 300GB RAID0 setup that already has Windows 7 on it. I shrunk the RAID0 disk within Windows disk management to make room for a Debian install. The thing is that I don't want to screw up the MBR and screw up windows. What is the command to install once I'm in the live cd and once I get a boot loader option what should I do as I already have windows 7?
View 1 Replies
View Related
Jul 21, 2010
I'm trying to install kubuntu and it keeps going in to the live os. From there I know it can be installed but its not getting far enough. My guess is do to my vga card. I'd just like to install from outside the kernal like normal, can that be done?
View 4 Replies
View Related
Mar 19, 2010
So I have the burned ubuntu CD, and I'm attempting to install it on a system that has one HDD with XP/Vista on it, and another that is completely formatted and unpartitioned. However, when I boot to the ubuntu CD, I can use the menus from the bottom, and select the language when initially prompted, but I can't select any of the menu options except for boot from first hard drive.
View 1 Replies
View Related
Jan 8, 2015
I have a USB which I want to use for a 'live' debian OS. I have debian 7.7 on hard disk and will be using Unetbootin to transfer the .iso file onto the USB.
However, when I go the debian archive there are so many iso files for the particular debian pkg [URL] .... There's iso, iso.contents, iso.log, iso.packages and iso.zsync. Do I download all of these iso files?
I'll be doing a Code: Select allsha256sums <iso-filename> to make sure the downloads aren't corrupted. But when I use Unetbootin and get it to write the main .iso file onto USB, do I then repeat this process with all the other iso files for the OS?
View 14 Replies
View Related
Jul 25, 2010
When I am installing texlive software suddenly power is switched off in the middle. Then onwards I am unable to update the system. And I tried to remove texlive but The error coming as texlive is not installed.
View 1 Replies
View Related
Jul 1, 2010
I am running Lubuntu 10 from a USB drive. Despite this, I believe this question pertains to any other variant as well. Running from the USB drive with a persistent directory, there is no boot options file that I can locate. As an example, for an installed version, the file /boot/grub/menu.lst can be changed to make boot options permanent.
Is there any way I can do something similar when booting from a USB live version? Specifically, I want to add "vga=799" to the options without typing it in at every launch.
Or is the only option for something like this actually installing to a USB drive instead of just running the live version?
View 4 Replies
View Related
May 28, 2010
After installing from the LXDE live CD I am unable to login. I type in my username, and then my password, and then the prompt goes back to the username (in other words, nothing happens). I can however login via the virtual terminals.
Could this be an issue with the live cd? Or was it just a bad install?
View 8 Replies
View Related
May 26, 2011
I downloaded and burnt the ISO imagw of Fedora 15 onto a CD. I wanted to try Fedora 15 before installing. So, I booted from the CD. However, in the list of Applications, I do not find Libreoffice Suite. Wil I need to download Libreoffice separately after installing Fedora 15?
View 1 Replies
View Related
Sep 4, 2010
So I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.
View 9 Replies
View Related
Jun 16, 2011
I have windows7 with partition of C:40G, D:40G, E:70.I want to install fedora15,so I use the tool "Disk Management" of win7 to shrink E:.Then I have E:60G and 10G unallocated.
I use Liveusb-creator and boot from usb.It works well and I can use fedora15 just like livecd.But when I install fedora to hard disk,I meet a problem and I don't know how to solve it.
The installation procedure comes "Which type of installation would you like?".There's five options 1."Use All Space" 2."Replace Existing Linux System" 3."Shrink Current System" 4."Use Free Space" 5."Create Custom Layout".I've already got 10G unallocated space,so I select "Use Free Space".But the problem is that the fedora installer popups a messagebox says something that means that I don't have enough space to allocate to fedora15.
I come back to "Which type of installation would you like?" and select "Create Custom Layout".The installer display 4 entries of my hard disk:sda1 unknown 0M, sda2 100M windows remain partition, sda3 with capacity 39900M, sda4 with capacity 112625M.The partition display of my hard disk is so strange and there is no free space.
Is the problem of win7 "Disk Management" or "Fedora Installer"? How can I really get some free space to install fedora15?
View 5 Replies
View Related
Jul 8, 2011
I am running the RedHat 7.3 install off a CD to put the system on an IDE flash drive. The flash drive appears as /sda1 on my system during installation. When I install the bootloader from the install CD it gives me the option of MBR on /hda which I do not want do. I select /sda1 and it puts the bootloader on first boot sector (not the MBR?) Although the installation works, is what I am doing creating a bootable primary hard drive? The flash IDE drive needs to be installed in an embedded system so my installation options are very limited i.e. the system does not have a CD-ROM or floppy to boot from. Are there options to put GRUB on the MBR of /sda1 during installation? Such as, with fdisk or the "force disk primary" option? Or, doesn't it matter?
View 2 Replies
View Related
Mar 31, 2010
i am running windows and fedora 12..both are working smooth...today when i switch on the laptop in morning i discovered that it automatically start windows..when again i restart it..it does not give any option to me for selecting which OS to run..i have seen grub.conf file it is right...i have done nothing...windows is booting smoothly..how can i boot to fedora 12 without reinstalling.
View 4 Replies
View Related
Apr 8, 2009
Has anyone EVER been able to run this particular command? Well I seriously need to run it for the gdm installation on my system. How to specifying the the url to get that package_file? I installed this system from the fc8 live cd -- are the files I need on that disk?
View 6 Replies
View Related
Aug 7, 2009
I am not able to see any dual boot options on restart.... getting back the windows?
View 4 Replies
View Related
Jun 25, 2010
I presently have Fedora 12 running on a Dell Optiplex with a Pentium 4 CPU. I want to buy a new computer, probably from Dell, I don't completely understand the options I have available for which Fedora 13 will run.I more or less understand what 64 bit means since I also have an HP with an AMD 64 bit processor. But are there other options which will allow me to exceed the i386 memory limit? How about dual processors?
I used to understand CPU architecture pretty well, but i've lost track of more recent developments. Can anyone recommend a primer of CPU types, including assoicated memory limits? Similarly, I would like to be sure that Fedora 13 will run on whatever machine I decide to get. So a list of available processors, which are equivalent to which, and which Fedora 13 has been tested on,
View 7 Replies
View Related
Aug 25, 2009
When configuring a custom kernel using fedoraproject.org instructions, the make menuconfig options for LIRC are not in the .config file anywhere. I checked the kernel tree and all the files are there in the .../drivers/input/lirc subdirectory (I need the lirc_dev and lirc_i2c drivers). I reset the .config to its original settings to make sure I didn't mess up. I also grep'ed the .config file for any LIRC related settings, none found. Also I'm not getting any sound from the radio-aztech driver.
View 1 Replies
View Related
Jan 10, 2011
I have Intel Pentium dual core T4300 2.10ghz processor in dell inspiron laptop. i had windows vista home basic by default and then i got ubuntu 9.04 installed on it from one of my friend. i was using ubuntu mostly (and upgraded it to ubuntu 9.10)as i never liked vista. so i installed windows 7 over windows vista. now vista is gone and windows 7 is working. but i no more see the boot options and cant access ubuntu at all. the boot options (F12) does not show linux partition at all. however the linux partition is seen in device manager. but its only seen.
how do i retrieve my old boot options including linux os? which asks me which os to boot from.
View 1 Replies
View Related
