Im trying to install fedora 10 on the ps3 but i get a blank screen after the media test question, i tested the media in this case the CD and it says it has no errors but when it goes to install it switches to a blank screen and gets stuck. Can anybody help me, or tell me what im doing wrong. Steps that i taken.
1.Download the ppc version of fedora10.
burn the ISO-image using the lowest possible setting.
2. i made a foder in my usb stick called PS3 and inside has another folder called otheros then inside it has the file otheros.bld
3. formatted the ps3 using the xmb. to 10 gigs for the other OS.
4. install Other OS using the usb stick that i made, install successful.
5. switch to other OS, using the XMB through systems settings.
6. Next I see a cd , i click on it with a mouse, see two penguins two options install 32 bit or 64 bit, i choose 64 bit.
7. then i get a media test question , choose skip and loads from CD.
8.Switches to blank screen and nothing else happens.
Just finished wiping and re-installing F12 From a DVD on an Dell Inspiron 9300 with a NV 6800. The NVidia site driver refused to install, so I used the method documented here
[Code]...
as instructed to in the sticky. On rebooting, after the load animation, the screen goes blank/black. If I click around, I can hear some beeps from the OS so I assume that things are running but i just can't see anything.
I'm trying to use the live cd on my HP Pavilion Entertatainment laptop, but I get a blank screen. The Ubuntu logo shows and I get to choose my language, but when I click on "Try Ubuntu without doing anything to your computer" (paraphrased) the screen goes blank. About a minute later I hear the Ubuntu music.
I created a Ubuntu Server 11.04 32 bit USB installer with the Universal-USB-Installer-1.8.4.4. I booted it up and get to the ubuntu install menu, were my first choice is "English" as language. Then I get to an installation menu were I proceed to "Install Ubuntu Server", but when doing so the screen just go blank and nothing happens. I've searched around for a solution but can't seem to find one.(Note: I've installed Ubuntu Server on other computers without facing this issue, so I don't know what went wrong this time.)
i installed fedora 12 on my pc and I also installed the ati drivers from atiand i rebooted and booted back in fedora all i get is a blank screen that does nothing
I recently installed ubuntu(32-bit 10.04) alongside windows 7 in my hp laptop(64-bit).When i installed all the updates available and restarted, a blank screen came after i chose to boot ubuntu.On pressing the power button, ubuntu closing animation appeared & it shut down.Is it because of my hardware drivers not supporting some updates.Do I have to re-install ubuntu..if yes, how do i remove it?..is deleting the ubuntu partion ok..how should i know which updates can be installed..also, are there any problems in running 32-bit version on a 64-bit laptop?
I installed mesa-dri-drivers-experimental package using yum in Fedora 12. I have an ATI Mobility Radeon HD 3450. After the reboot as soon as the fedora bubble fills up the screen goes blank with a blinking cursor. You can type in that black screen and do nothing else. When you press alt+ctrl+del a few services are stopped and the system is rebooted.
i installed fedora 12 on my pc and I also installed the ati drivers from ati and i rebooted and booted back in fedora all i get is a blank screen that does nothing
The wubi installer copied files successfully and asked for reboot. After booting into Xubuntu the flashing logo appeared for a minute. And then the screen looked as if it was trying to show something but could not and flickered and then became dark this continued till half an hour and then I pressed Alt+Ctrl+Del.I tried all the modes but to no avail, only the last mode with command line was working. But it was not helpful for me becoz I dont know most of the commands.When I tried "Verbose Mode" as directed by the WubiGuide - Ubuntu Wiki, CTRL+ALT+F2 did not work when the installer stopped.The computer I use is assembled with Intel pentium 4, VIA chipset and Mercury(Kobian) motherboard.
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
i had a serious problemafter i checked my hardware detected by using liveCD, there's no problem i thoughti successfully installed it on my PCbuti got blank/no screen appeared when it started up
I've just got a second-hand computer at a bargain price and I would love to install Fedora 10. I have some previous knowledge on Ubuntu, so I'm not completely new to Linux, but I'm pretty amateur still. Anyway, I have some trouble installing either Fedora or Ubuntu to this machine right now. It has an AMD Sempron 3800+ (2,2 GHz) & an ATI Mobility Radeon X1250. I have the usual "Automatic boot" screen.
Then everything seems to load fine, besides I have an apciphp error. After this single line of error, I have the usual loading bar; and then a blank screen - nothing seems to happen. I saw there were some issues installing Linux on this model - so if you can help me solve this, I'm sure other people will benefit as well!
I have a fresh install of Fedora 11. All is good except the VNC client. When connected using the client all is fussy or blurred out. The Fedora computer is next to my computer and I can see the movement of the mouse on its screen, but cannot see on VNC viewer. I have tried this from several different computers Windows XP and Windows 2003 and the result is the same.
I just tried to install Fedora 13 but after the log on count down I just get a blank screen - nothing else. The disk is still loading but no screen action at all. My graphics card is Nvidia GeForce 6150 LE.
I am trying to use a F14 network install CD to upgrade on an old HP Pavilion 9695C (Athalon 850MHz, nVidia NV5 RIVA TNT2/TNT2 Pro AGP) with F12 on it. This same disk successfully upgraded a HP Omnibook 6000 with F12. I boot with the network install CD and get the initial menu to select to install/upgrade, install using basic video driver, etc. After selecting either upgrade or basic video driver install, I see the CD being read, then nothing, just a blank screen. I had a similar problem with F12 network install on this machine. So I tried adding "vga=0x318 nomodeset" to the upgrade boot options. The only difference is a quick flash on the screen, then a blinking "underscore character" cursor. The "install using basic video driver" has the same result.
Have also tried:linux nofb vga=791 [nomodeset] vga=1 [nomodeset] xdriver=nv nomodeset xdriver=vesa nomodeset
However, I always end up with a blank screen or blank screen with blinking underscore cursor. I know this particular AGP has problems with the nouveau driver. On F12 I had to force it to use the nv driver. I submitted a bug but there was no interest on it as this was F12 and F13 was the latest at the time. I did try to upgrade to F13, but ran into this same problem. I was hoping F14 would be better.
trying to install fedora but after I sellect install or install with basic video, the screen scrolls a bunch of text then goes blank. I'm on a laptop and tried unplugging. The lcd monitor but it still goes blank on the laptop screen. The cd is no longer spinning and the hdd light isn't blinking. What do I do?---------- Post added at 10:44 PM ---------- Previous post was at 10:11 PM ----------Sorry if my description of the problem is confusing, here's a video of what its doing
i have fedora 8 on my machine...i want to uninstall it..i restarted my machine with windows CD on it....but shortly after pressing key to continue configuring the installation, screen goes blank and computer becomes idle....i tried using about 10-15 different CDs of windows OS but failed every time...what could be the reason and how can i fix this......NOTE: but if i try to reinstall fedora the problem dosen't occur.
when I fired up the installer, after asking to test the media (which I skipped) and starting up the actual installer (anakonda, akonadi, whatever the name was, can't remember now and too lazy to look it up), it seemed to start up fine, except I couldn't get the wizard to show up. I did see the cursor, and occasionally I would get the "searching for storage devices" message (I restarted it a few times to see if I would get it working), but nothing. I also tried random key presses (namely F12,F1-F4), and after some time got a message saying that I had to enter the root password, so I presumably got to the root password screen blind...? (meaning that the installer apparently is ther, I just don't see it?)
After several restarts, though, I managed to get the wizard visible (just luck?), so I went ahead with it, but apparently I messed it up, when I rebooted I didn't get the screen visible again, after some random keypresses I got to the login prompt but I obviously hadn't created any accounts, so :/ I tried booting from the DVD to the rescue mode and manually adduser-ing from the console, but when I tried logging on, it would just come up with some kinda bluetooth-related error message and then hang on there with only the background image on the screen. I didn't try the basic video driver thingy yet because this didn't seem like a video driver issue (well, not entirely anyways), and I need my 3D acceleration, so...
Basically, I'd be glad if anyone knows what's up with the installer, and if it's not fixable as such, would installing with the basic video driver and then installing the proprietary drivers afterwards be all right? Sorry for the wall-of-text, though, it's just one of those days, it's bedtime and I get carried away...
After struggling to install openSUSE 11.2 on my computer with ATI radoen graphics, I finally managed. Rebooting just after initial installation caused my laptop to give me a blank screen, no command prompt, nothing. With some help from the only post with such a problem on Ubuntu website and after first installation, I did the following:
1. Boot from Live cd of opensuse 11.2 2. Mount the partition which has root. 3. check for and delete Xorg
I have installed 11.2. When it starts to boot it runs through its startup and then all I get is a blank screen. I noticed in startup just before it says starting HAL it says CPU frequency not supported. I am assuming that this is the issue. I have run 11 and 11.1 on this box and have not had a problem with this. I have a P4 3.00 GHz with 2 GB of RAM.
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
I attempted to do the upgrade from 11 to 12 with the Preupgrade Assistant. Unfortunatly something went terribly wrong. Everything went well, excluding the size of partition error, untill the reboot. I did have to remove two previous installs. Now grub gives me an option to upgrade to Fedora 12. When I select this the screen runs code quickly and the screen goes blank with alot of disk activity. Then nothing. Is there a method of recovering this install? I am fairly new to Linux Administration and I am just knowledgable enough to mess things up.
I have the following system using an ATI graphics card, SATA Drives and want to install Fedora 12 as a dual boot option with Windows XP.
Using an install DVD it seems that Fedora installs then at a point during the copying of packages the screen goes blank actually switches off. The DVD Drive and Hard drive still work , my guess is completeing the install. On reboot I do not get the option to boot to linux.
I have 2 SATA 3Gbs Hard Drives formatted for windows NTfs. One has 2 partitions and some free space, the other is formatted NTFS and is my data disk.
I would like to be able to access the data disk with both Windows and Linux and install Linux system in the free space.
Having read a few of the guides available, none of them seem to mention this problem, although I am aware of the Ati support problem. I am hoping I do not have to replace my graphics card with a nVidia one.
I installed OpenSuse Gnome version 64 bit on a HP laptop DV7 Intel Dual Core with nVidia 9600 GM cardAll went well, until after I had installed the nVidia drivers from this page: NVIDIA drivers - openSUSEI selected the Geforce 1-click install and Yast went on to installl all the packages (a lot of 32-bit),took about half an hour.I logged out/in, and could work as normal, until I rebooted. Maybe I waited not long enough (5 minutes), but the screen was blank, then I gave up.Anyone has an explanation. I can always re-install everything, but then what went wrong with the nVidia package
In installing Intel Fortran Compiler for Linux in my HP Laptop running on FC6,the rpm for debuger shows a dependency error for libXft.so.1. On searching in my system, foundlibXft.so and libXft.so.2. I downloaded and installed the rpm package "xorg-x11-libs- .8.2-37.FC4.49.2.1.i386.rpm"(rpm for FC6 was not found) with 'rpm -i' option. On rebooting Fedora, nothig displayed in monitor except few initiliation messages. I booted the system with FC6 installation DVD and tried to uninstall by mounting as 'chroot /mnt/sysimage' with 'rpm -e' command, but en error message comes as "error, the package 'xorg-x11-libs- .8.2-37.FC4.49.2.1.i386.rpm'is no installed". On booting from the system, i found the same problem.
when trying to choose the Linux partition, I found that it would just hang at a blank screen. Looking further into the problem, I had booted with the Linux Rescue and checked the /boot/grub/grub.conf file. It appeared to be that the menu was set to hidden. I got rid of that line, and checked the boot arguments. It still had acpi=off set with the kernel and everything else seems to be in order. Root is set to root (hd0,2) which should be correct.
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
I have installed Ubuntu Maverick 10.10 RC in my PC, everything works fine, but after install Nvidia proprietary Graphics driver it boot up on a blank screen (I can hear the login sounds, etc) but screen is absolutely black.
I try to login in recovery mode and check if something is wrong but nothing happens (even adding noveau driver to a blacklist (editing grub)) Now I have re installed Ubuntu 10.04.1 and works fine but I would like to install the 10.10 version, since I have this inconvenience, I cant do it.
My graphic card: Nvidia Gforce 8400GS 256MB Pci Express
