Software :: Installed Fedora 13 X86_64 And Unable To Hibernate - Screen Just Goes Dark
Jun 11, 2010
I've installed Fedora 13 x86_64 and am not able to hibernate (though suspend works fine). This is the case either with or without the proprietary Nvidia drivers from rpmfusion. When I click System -> Shut Down -> Hibernate, the screen just goes dark. Moving the mouse activates the display and the password confirmation box appears. Judging by the disk activity light, nothing is written to disk. Swap space is configured correctly.
Looking at the last few lines of /var/log/pm-suspend.log I see this:
It looks like grub (or the absence of grub.conf) is interfering. Problem is, I'm not even using Fedora's grub to boot the system. I'm dual booting with Ubuntu 8.04 and am using that grub. The section from that grub's menu.lst is:
But of course Ubuntu 8.04 is pre grub2 so how do I satisfy Fedora's grub.config without messing this up?
View 1 Replies
ADVERTISEMENT
Dec 7, 2010
I am unable to boot my laptop in the usual way. The fedora emblem in the centre of the screen appears and starts to turn from white to dark blue in the usual way. When it is almost complete it stops.
In order to make the machine boot i hit escape and a message says leaving interactive startup mode. At this point the machine continues to start up.
When i do manage to get it to boot i get the following message repeated many times:
I should also add... The laptop will not close down, once i click switch off the screen turns blue and displays the fedora emblem in the centre. At the top right text says "Shutting Down" but at this point the system hangs.
View 3 Replies
View Related
Feb 24, 2009
I'm kind of new to linux, but even I shouldn't have this much trouble, because I've been reading faqs like crazy and tutorials, but I just don't understand what's going on. I'm installing Linux Mint on my old machine now and it's installing good, but I try to install Fedora 10 and I've been having problems. It works fine in VMware, but when I try to load it from a live CD to install into the drive, on the initizialize process it say's "failed ata something something", then it goes to a bar and then it goes to a black screen and it hangs there. I did 5 md5check sums on the same iso, I'm not sure what's going on?
View 2 Replies
View Related
Jul 18, 2010
I've had Windows XP installed on a Dell Inspiron 6000 laptop with 1 gig of ram and 70 gig hard disk. Today I decided to install Ubuntu 10.04 desktop edition to ext3 partitions I made on the laptop's hard disk. The Ubuntu installation went fine, and Ubuntu was up and runnning. Then for fun, I checked the available WiFi networks in this apartment building. Six were secure but one WiFi was open, so I clicked it out of curiosity. Within seconds, my laptop's 15-inch screen went super-dark, nearly jet black.I couldn't read anything on the screen. Pictures and words were still on the screen, but just way too dark to read or to see with any clarity at all. I don't have a WiFi card in the laptop.Instead I use Verizon's usb727 air card on Verizon EVDO Mobile Broadband (3G)
I don't know if the free Wifi network hosed me in some way with a nasty trick (I don't have a WiFi card in the laptop--just the usb727 dongle which is an EVDO aircard), or if it was just coincidental that the screen went super dark seconds after clicking the open Wifi network in Ubuntu's network manager applet.When I reboot, I don't see anything anymore, not the POST, not Windows XP booting up, or Ubuntu booting up. The only way I see anything now is to connect the laptop to an external monitor using the laptop's blue video connector. And even then, I still can't see the boot-up POST process, or the BIOS screen.I can only see Ubuntu or Windows XP after they've finished loading, and only on an external monitor. Did the new installation of Ubuntu hose my Dell Inspiron 6000 laptop's screen, or was it the Wifi network, or did the screen just coincidentally go bad minutes after I installed Ubuntu and seconds after I clicked the open Wifi connection?
View 5 Replies
View Related
Jul 11, 2011
Is it possible for plymouth to work with the ATI Catalyst driver installed in Fedora 15 x86_64?
Is it that plymouth requires KMS and Catalyst doesn't provide it? With the nvidia driver, I could put a vga= line in grub and plymouth would run. Is there something similar for catalyst?
View 3 Replies
View Related
Dec 20, 2010
i recently update my linux ubuntu 10.10 when i update it and restarded it my os doesnt work anymore , my screen is also blinking and a dark screen background , what happen to my os ?
View 7 Replies
View Related
Dec 6, 2009
Today's update failed with this line tagged to every package:
Error: Unresolvable requirement /sbin/ldconfig for pixman-0.16.2-1.fc12.x86_64 (installed)
Error: Unresolvable requirement /sbin/ldconfig for libXrandr-1.3.0-3.fc12.x86_64 (installed)
Error: Unresolvable requirement /sbin/ldconfig for libedit-2.11-4.20080712cvs.fc12.x86_64 (installed)
[code]....
View 6 Replies
View Related
Aug 26, 2010
I'm using the shiki colors theme from the repos right now. "Shiki-Noble" to be specific. When typing something into Firefox's URL bar the internet addresses have got a dark font color and are hard to read on the dark background. Here's a screenshot: FF.jpg
I've had similar issues with other themes and Firefox's URL bar before.
View 2 Replies
View Related
Feb 1, 2011
When I press the power button and select 'Hibernate' I get a text string come up on the screen. The last characters are "fail: -6". There is more to it but it's there and gone so quickly I haven't written the rest of it down yet. What this might be?
View 3 Replies
View Related
Nov 6, 2010
I just installed FEDORA 14 on my PC which already had Vista. I am able to dual boot through the GRUB boot loader. I am facing an issue where wired network in FEDORA stops working if I hibernate Vista. I really would like to be able to hibernate both to quicken the startup times.
Here are the steps:
1. Boot to Fedora (everything works fine including wired network)
2. Hibernate Fedora
3. Boot to Vista (everything works fine including networking)
4. Hibernate Vista
5. Boot to Fedora. It loads up fine, but wired network status icon keeps spinning and then results in a kernel package crash. I already reported the crash to Fedora.
6. Hibernate Fedora and boot to Vista (Vista resumes fine from hibernation and everything works in Vista including networking).
Is Fedora supposed to work when both Fedora and Vista are hibernated in a dual boot PC?If I shut down Vista, and then resume Fedora, networking works fine. So there is something in Vista hibernation that causes Fedora networking to fail. This issue remains even if Fedora is restarted (not hibernate/resume).
View 4 Replies
View Related
May 21, 2010
1.I booted from a DVD of RHEL 5 to install RHEL.
2.At the very 1st screen of the installation a red window comes.I press enter to start GUI installation.
3.By keeping all option default I finish my installation successfully in a GUI mode.Then my PC asked me to reboot & eject the CD.
4. I eject my CD and click the Reboot button.
5. Finally when my PC rebooted then My monitor acl 14 " CRT So I see a black screen. But My CPU is working ! After waiting 30 minutes I don't get any result/output screen on my monitor. Thats the problem !
View 3 Replies
View Related
Oct 8, 2010
and am coming from XP/Vista, loving it so far. But there is one problem I am having. After about 10-15 min of me not typing or moving the mouse, the screen dims and then goes to a screen where it asks for my password. This is getting very annoying while I am watching videos. How do I get it to stop doing this all together, I want to be able to leave my brother/friends on my computer and not have to come in every 10 min to type in my password
View 2 Replies
View Related
May 9, 2010
Just upgraded to 10.04. Screen is now unusable. It's like looking at it through a blue filter. It seems to be averaging the brightness. if there is a large dark area of screen real estate the paler sections getbrighter.The very bizarre thing is, if I switch user, whilst the theme is different, the brightness problem is gone...
View 1 Replies
View Related
Dec 22, 2010
Just installed 11.04 (Natty). Graphics card is Radeon 9200When I enable Cube in the compizconfig settings manager and rotate the cube, the cube goes almost black. This happens with both drag and keyboard rotate. The background is fine. Everything is defaults and no other effects are enabled.Also, the entire screen goes dark when "opacity when not rotating" is set to anything but 100%.This worked fine with with my previous version 8.04, though I think it used a proprietary driver.Questions:Should I be using a proprietary driver this card? Apparently you have to install a long list of packages first: XFree86-Mesa-libGL libstdc++ libgcc XFree86-libs fontconfig expat freetype zlib
View 1 Replies
View Related
Jun 23, 2011
I'm trying to install ubuntu alongside Windows 7 on a HP Pavilion DV3. When I reboot I'm given the option to either boot into windows or ubuntu (this is after running the wubi program from the ubuntu website); when I select ubuntu it says that the installation will continue but the screen then goes very dark like the brightness has been turned right down. In the center of the screen I can faintly see the word ubuntu. I've tried using the hot-keys on the laptop to turn the brightness up but this doesn't work. I've also tried installing from CD but his doesn't work either and I get the same problem. This is my first time installing ubuntu so I'm not familiar with how the installation process works. Also if any other details are needed I'll be happy to give them.
View 6 Replies
View Related
Jun 22, 2010
i have upgrade ubunto 9 to 10.04 so that in log in section there is a KDE session appears. when i log on in KDE then it will came a new KDE screen with drive icon and setting icon also desktop icon.. unfortunately i click on there and these desktop screen disappear.. so how to do for come back KDE in right position.Now when i login in KDE it will show total dark screen.
View 2 Replies
View Related
Aug 26, 2010
When my laptop is running of the battery the screen goes fairly dark, I don't like this, I've changed the power settings to try and stop it (unticking the reduce backlight) but it doesn't do anything.
View 6 Replies
View Related
Aug 7, 2010
I have a desktop with AMD Sempron 3000+, 1.2GB RAM, VIA S3G Unichrome Pro IGP, VIA SATA RAID controller based disks, PS/2 mouse and keyboard running Windows XP. Wanted to move to years ago favourite (linux based systems), I downloaded Ubuntu 10.04 for i386 and am trying to install both using CD as well as USB. After the Ubuntu start-up menu for installation, I select install Ubuntu option, turn off 'quiet' so that I can see what happens. The screen goes blank dark with a flashing cursor at the top.
In the kernel messages, the see that it has detected the processor, set the clock, assigned the PS/2 keyboard to input3 and then says:
[1.911624] isapnp: no plug and play device found
After this, the system hangs. Keyboard doesn't work.
View 9 Replies
View Related
Apr 18, 2011
I have a Gateway NV59C09u laptop, I tried running both maverick and the latest beta of natty as live usb's to no avail. It boots fine, but at the first screen the light is so dark that I can't really read anything nor see the mouse pointer, I can just barely make out a window-looking thing. Trying to increase the brightness using my F-keys doesn't do anything.
It's gotta be some kind of graphics related issue, because booting the alternate iso works fine. If I could figure out a way to boot the ubuntu-desktop live image via a different video driver that would probably work, but I'm not sure how to do that (ctrl+alt+f1 does nothing).
View 7 Replies
View Related
Oct 4, 2010
Running windows xp on dell laptop. Installed ubuntu 10.04 all was working fine. Had to format hard drive and re-install windows Xp. when trying to install ubuntu 10.04 i get a dark screen.
View 1 Replies
View Related
May 4, 2011
Despite being warned from a friend of mine who works for Intel that the new version of Ubuntu 11.04 sucked? I upgraded from 10.10 which worked perfectly fine and did everything that I wanted it to except work with my COBY MP3 player which is what I hoped 11.04 would do. It all worked great until I rebooted. I previously had the main screen on the left where all of the menus are and the right screen was the 2nd monitor.
Once it rebooted it let me login and loaded the desktop but the main screen is now on the right with that stupid application bar going up the side, all of my folders, etc. are all there but NOTHING is clickable, even the icons up in the right corner where you logout, etc. will not do anything other than highlight that you have clicked on them, the hard drive light flickers for a few moments then nothing.
Also the left hand screen is completely blank unless I move the mouse cursor through it. If I just leave the computer sitting there eventually the screens go dark and the monitor lights start flashing like it is supposed to but if I wiggle the mouse the screens come back on and the mouse is there but there is no login prompt to let me log back in. Pardon my French but this OS is a piece of <bleep> and sucks just like I was told.
View 4 Replies
View Related
May 6, 2010
I recently installed Kubuntu 10.04 on a Toshiba Satellite 5205 laptop (which is prone to overheating, if it helps - it was on a platform in the back for airflow, though), which worked great for about 4 days.
Recently, I picked it up (looking for a USB port) and rotated it around a little bit. However, after this, the screen was darkened (not fully), and I could move the mouse for about half a second, after which it jumps back to the upper left corner of the screen. Rebooting doesn't help.
View 2 Replies
View Related
Jul 4, 2010
out of no where it seems ubuntu no longer wants to cooperate when suspending/hibernating. the screen will just turn to a black screen without shutting down. each time i have to maually power down my laptop.
View 1 Replies
View Related
Nov 10, 2009
Today I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
View 2 Replies
View Related
Aug 27, 2009
Maybe this should be asked on the hplip website somewhere but I will ask it here. I am running CentOS 5.3 x86_64. The latest rpm version of hplip which I can find, and which is installed, is 1.67 but I need at least version 2.84 of hplip for my printer, an OfficeJet j6480.
Has anyone installed hplip version 2.84 or later for an x86_64 system ? Do either the hplip-2.8.4.run or hplip-2.8.4.tar.gz installation methods install hplip 2.84 for an x86_64 system, as opposed to just an x86 system ? Has anyone produced on he web somewhere a 2.84 or later hplip rpm for x86_64 that I can use rather try to figure out how to do it myself ?
View 1 Replies
View Related
Sep 26, 2009
When I installed CentOS on a 64 bit machine, I selected the 64 bit option. However, for some reason it installed many i386 packages - these were exact duplicates of installed x86_64 packages.Is this typical? How do I prevent this on future installs? If I left them installed, could this have caused a problem in the future? Due to my fastidious nature, I used yum extender to uncheck every duplicate i386 package and uninstalled them. This took some time. I am still not proficient with yum directly so I am wondering if there is a command to uninstall all i386 packages quickly.
View 2 Replies
View Related
Jul 29, 2011
i`m trying to set up a Central Backup Server with BackupPC installed on CentOS 5.6 x86_64, My CentOS has Samba3x / Winbind integrated with Active Directory i found this nice Wiki http://wiki.centos.org/HowTos/BackupPC , to get my BackupPC installed. after installing RPMForge's repo and settin` up the priorities to the repos, http://wiki.centos.org/PackageManagement/Yum/Priorities i get the following error regarding Samba3x Conflicts , i dont wanna miss up my Samba Configuration to install BackupPC, even --skip-broken option does not work for me
[Code]....
View 2 Replies
View Related
Apr 5, 2010
I've just installed OpenSUSE 11.2 instead of 11.1 and installed a new kernel 2.6.33. And now I have a problem. When I try Shutdown -> Hibernate under simple user my screen becomes black and nothing happens. Then I move my mouse or press an key and I see my desktop and a window that asks me to enter my root password. I thought there is some problem with permissions so I logged in as a root and tried to hibernate but everything went the same way except there was no window to enter root pass. I checked my kernel config and hibernate is on there.
View 6 Replies
View Related
Feb 11, 2010
I installed VMware server on my CentOS 5 machine. I had problems getting that working. Then I installed VMware Workstation. That worked fine. Then I tried using VMware server, but apparently VMware Workstation deleted some of VMware Servers files. So, I uninstalled VMware Workstation. Then I tried to reinstall VMware Server, but rpm complains package VMware-server-2.0.2-203138.x86_64 is already installed
View 3 Replies
View Related
May 8, 2010
I have recently installed OpenSuse with GRUB boot-loader on my Vaio FW series laptop. I had to uninstall it because it caused Windows 7 to be unable to hibernate. I installed other distros (Fedora 11 and others) and the same problem recurred. This lead me to the conclusion that the problem is with the boot-loader (as my research suggested)..It has been months now, and I have not found any proper solutions to this yet. Linking this to Ubuntu, I recently downloaded and burned Ubuntu 10.04 LTS, however, I am still reluctant to install it until I know a solution is available. Has anyone had Linux-Windows 7 dualboot and also faced problems with hibernation/stand-by?
View 3 Replies
View Related
