Ubuntu Installation :: Screen Goes Dark After Reboot
Jun 23, 2011
I'm trying to install ubuntu alongside Windows 7 on a HP Pavilion DV3. When I reboot I'm given the option to either boot into windows or ubuntu (this is after running the wubi program from the ubuntu website); when I select ubuntu it says that the installation will continue but the screen then goes very dark like the brightness has been turned right down. In the center of the screen I can faintly see the word ubuntu. I've tried using the hot-keys on the laptop to turn the brightness up but this doesn't work. I've also tried installing from CD but his doesn't work either and I get the same problem. This is my first time installing ubuntu so I'm not familiar with how the installation process works. Also if any other details are needed I'll be happy to give them.
I have a desktop with AMD Sempron 3000+, 1.2GB RAM, VIA S3G Unichrome Pro IGP, VIA SATA RAID controller based disks, PS/2 mouse and keyboard running Windows XP. Wanted to move to years ago favourite (linux based systems), I downloaded Ubuntu 10.04 for i386 and am trying to install both using CD as well as USB. After the Ubuntu start-up menu for installation, I select install Ubuntu option, turn off 'quiet' so that I can see what happens. The screen goes blank dark with a flashing cursor at the top.
In the kernel messages, the see that it has detected the processor, set the clock, assigned the PS/2 keyboard to input3 and then says: [1.911624] isapnp: no plug and play device found After this, the system hangs. Keyboard doesn't work.
I'm kind of new to linux, but even I shouldn't have this much trouble, because I've been reading faqs like crazy and tutorials, but I just don't understand what's going on. I'm installing Linux Mint on my old machine now and it's installing good, but I try to install Fedora 10 and I've been having problems. It works fine in VMware, but when I try to load it from a live CD to install into the drive, on the initizialize process it say's "failed ata something something", then it goes to a bar and then it goes to a black screen and it hangs there. I did 5 md5check sums on the same iso, I'm not sure what's going on?
Despite being warned from a friend of mine who works for Intel that the new version of Ubuntu 11.04 sucked? I upgraded from 10.10 which worked perfectly fine and did everything that I wanted it to except work with my COBY MP3 player which is what I hoped 11.04 would do. It all worked great until I rebooted. I previously had the main screen on the left where all of the menus are and the right screen was the 2nd monitor.
Once it rebooted it let me login and loaded the desktop but the main screen is now on the right with that stupid application bar going up the side, all of my folders, etc. are all there but NOTHING is clickable, even the icons up in the right corner where you logout, etc. will not do anything other than highlight that you have clicked on them, the hard drive light flickers for a few moments then nothing.
Also the left hand screen is completely blank unless I move the mouse cursor through it. If I just leave the computer sitting there eventually the screens go dark and the monitor lights start flashing like it is supposed to but if I wiggle the mouse the screens come back on and the mouse is there but there is no login prompt to let me log back in. Pardon my French but this OS is a piece of <bleep> and sucks just like I was told.
I've had Windows XP installed on a Dell Inspiron 6000 laptop with 1 gig of ram and 70 gig hard disk. Today I decided to install Ubuntu 10.04 desktop edition to ext3 partitions I made on the laptop's hard disk. The Ubuntu installation went fine, and Ubuntu was up and runnning. Then for fun, I checked the available WiFi networks in this apartment building. Six were secure but one WiFi was open, so I clicked it out of curiosity. Within seconds, my laptop's 15-inch screen went super-dark, nearly jet black.I couldn't read anything on the screen. Pictures and words were still on the screen, but just way too dark to read or to see with any clarity at all. I don't have a WiFi card in the laptop.Instead I use Verizon's usb727 air card on Verizon EVDO Mobile Broadband (3G)
I don't know if the free Wifi network hosed me in some way with a nasty trick (I don't have a WiFi card in the laptop--just the usb727 dongle which is an EVDO aircard), or if it was just coincidental that the screen went super dark seconds after clicking the open Wifi network in Ubuntu's network manager applet.When I reboot, I don't see anything anymore, not the POST, not Windows XP booting up, or Ubuntu booting up. The only way I see anything now is to connect the laptop to an external monitor using the laptop's blue video connector. And even then, I still can't see the boot-up POST process, or the BIOS screen.I can only see Ubuntu or Windows XP after they've finished loading, and only on an external monitor. Did the new installation of Ubuntu hose my Dell Inspiron 6000 laptop's screen, or was it the Wifi network, or did the screen just coincidentally go bad minutes after I installed Ubuntu and seconds after I clicked the open Wifi connection?
i recently update my linux ubuntu 10.10 when i update it and restarded it my os doesnt work anymore , my screen is also blinking and a dark screen background , what happen to my os ?
I'm using the shiki colors theme from the repos right now. "Shiki-Noble" to be specific. When typing something into Firefox's URL bar the internet addresses have got a dark font color and are hard to read on the dark background. Here's a screenshot: FF.jpg
I've had similar issues with other themes and Firefox's URL bar before.
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
and am coming from XP/Vista, loving it so far. But there is one problem I am having. After about 10-15 min of me not typing or moving the mouse, the screen dims and then goes to a screen where it asks for my password. This is getting very annoying while I am watching videos. How do I get it to stop doing this all together, I want to be able to leave my brother/friends on my computer and not have to come in every 10 min to type in my password
Just upgraded to 10.04. Screen is now unusable. It's like looking at it through a blue filter. It seems to be averaging the brightness. if there is a large dark area of screen real estate the paler sections getbrighter.The very bizarre thing is, if I switch user, whilst the theme is different, the brightness problem is gone...
Just installed 11.04 (Natty). Graphics card is Radeon 9200When I enable Cube in the compizconfig settings manager and rotate the cube, the cube goes almost black. This happens with both drag and keyboard rotate. The background is fine. Everything is defaults and no other effects are enabled.Also, the entire screen goes dark when "opacity when not rotating" is set to anything but 100%.This worked fine with with my previous version 8.04, though I think it used a proprietary driver.Questions:Should I be using a proprietary driver this card? Apparently you have to install a long list of packages first: XFree86-Mesa-libGL libstdc++ libgcc XFree86-libs fontconfig expat freetype zlib
i have upgrade ubunto 9 to 10.04 so that in log in section there is a KDE session appears. when i log on in KDE then it will came a new KDE screen with drive icon and setting icon also desktop icon.. unfortunately i click on there and these desktop screen disappear.. so how to do for come back KDE in right position.Now when i login in KDE it will show total dark screen.
When my laptop is running of the battery the screen goes fairly dark, I don't like this, I've changed the power settings to try and stop it (unticking the reduce backlight) but it doesn't do anything.
I have a Gateway NV59C09u laptop, I tried running both maverick and the latest beta of natty as live usb's to no avail. It boots fine, but at the first screen the light is so dark that I can't really read anything nor see the mouse pointer, I can just barely make out a window-looking thing. Trying to increase the brightness using my F-keys doesn't do anything.
It's gotta be some kind of graphics related issue, because booting the alternate iso works fine. If I could figure out a way to boot the ubuntu-desktop live image via a different video driver that would probably work, but I'm not sure how to do that (ctrl+alt+f1 does nothing).
Running windows xp on dell laptop. Installed ubuntu 10.04 all was working fine. Had to format hard drive and re-install windows Xp. when trying to install ubuntu 10.04 i get a dark screen.
I recently installed Kubuntu 10.04 on a Toshiba Satellite 5205 laptop (which is prone to overheating, if it helps - it was on a platform in the back for airflow, though), which worked great for about 4 days.
Recently, I picked it up (looking for a USB port) and rotated it around a little bit. However, after this, the screen was darkened (not fully), and I could move the mouse for about half a second, after which it jumps back to the upper left corner of the screen. Rebooting doesn't help.
I've installed Fedora 13 x86_64 and am not able to hibernate (though suspend works fine). This is the case either with or without the proprietary Nvidia drivers from rpmfusion. When I click System -> Shut Down -> Hibernate, the screen just goes dark. Moving the mouse activates the display and the password confirmation box appears. Judging by the disk activity light, nothing is written to disk. Swap space is configured correctly.
Looking at the last few lines of /var/log/pm-suspend.log I see this:
It looks like grub (or the absence of grub.conf) is interfering. Problem is, I'm not even using Fedora's grub to boot the system. I'm dual booting with Ubuntu 8.04 and am using that grub. The section from that grub's menu.lst is:
But of course Ubuntu 8.04 is pre grub2 so how do I satisfy Fedora's grub.config without messing this up?
I just installed Ubuntu on the second partition of my hard drive. I have Windows 7 installed on the first partition. My problem is is that when I rebooted after a successful OS installation and apparent grub install, it went straight to boot up Windows 7. There's probably a simple way to get the grub menu to appear that I'm unaware of, right?
I am able to get fglrx driver to work with 10.10, but as soon as I change my displays settings to have my good old dual screen setup, I get a blank screen when I reboot the system.
I had ubuntu running just fine on another computer, but had to move things around to make Windows7 run better. So after backing up Home, I switched hard drives, pulled the video card, and adjusted RAM, I tried booting up. The computer found all the changes and did its thing. But then it hung with a blank screen. I figured that it didn't recongnize the video driver for this computer, or something, so I did a fresh install with 9.10 to start over from scratch. The boot up went great, and finished completely. I made a few changes to the desktop, and loaded in my archived firefox bookmarks and evolution files. After rebooting, the first ubuntu logo came up, but then the blank screen, with no drum sounds. I tried a few more times rebooting and hitting esc, but I don't know what I am doing at that menu. I also tried the F1 option, but again, I don't know anything. One other time I was able to boot into ubuntu all the way when I was hitting esc slowing (waiting) and somehow was able to get the login and the desktop just fine. I haven't been able to get that to happen again.
Can someone walk me through the steps to troubleshoot this? I don't know any terminal jargon or commands, and haven't really got a clue, but I really want to learn and figure this out. I don't even know how to go in from the command line to see what my system specs or video specs are to tell you.
i wonder if any one can help me, i have just installed 9.10 on my Dell Optiplex P4 2.0GHz 512MB RAM 200 g hd.install went well up till i eject cd at the end,when it try to reboot all i get is a blank screen ?
I've been running Ubuntu Maverick as a fresh install since release, and for the last 2 days, I'm having to log in twice! This is only on a locked screen, not on reboot or switch users. After the first login, I see the desktop for a second, then the screen goes blank. I wiggle the mouse and the login screen is there again. The 2nd login goes as normal.
I have gradually been installing things as I need them over the week since install, but I can't pin it down to any of those. It's getting pretty annoying when the screen saver kicks in!
Using Ubuntu and any Linux OS. I installed Ubuntu using the Wubi installer. Everything went fine. When the install wizard completed and asked to Reboot Now, I did. When my computer rebooted, the Windows Boot Manager doesn't appear and it goes straight to Windows.
I'm using 32 bit Vista and have an AMD Athlon X2 Dual Core Processor 5000+. When using Wubi, the download defaults to the AMD 64 version and that is what I have installed.
I tried to update my main computer from Ubuntu 10.0 to 11.04. I wish I could remember what it said, but it crashed during the update. The lights on the keyboard were flashing on and off as well. When I try to boot, all I get is a black screen and flashing lights. The Ubuntu recover also has the same thing. I am going to try a fresh install. For some reason I am leaning to the power manager, but I am no where near sure.
I have problem with my Debian. Sometimes after reboot I can see only mouse cursor (moveable) and black screen with command prompt in top -left corner. I don't know how to fix it...
Code: Select allroot@debian:/home/rafal# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 8.1 (jessie) Release: 8.1 Codename: jessie
I was able to get Fedora 10 to run on VirtualBox. Since the system wouldn't let me set the resolution to anything bigger than 800 x 600, I decided to get the nVidia driver (I'm running the nVidia 8400m G). I did it through this guy's tutorial: [URL]... After rebooting, I see the loading bars and everything, but I get a blank screen with a cursor. After pressing ctrl+alt+F3, I was able to log in to the root and execute the "akmod builds the required kmod on bootup" under the "For GeForce 8 series" [URL]... After a reboot, I still get the same thing. Will I have to reinstall Fedora 10 and just not update the nVidia graphics drivers? I have a 20" monitor that has a resolution of 1600 x 1050 and I would really like to take advantage of that.
I installed fedora core 11 on a dell inspiron laptop which has windows vista already installed on it. It shows that fedora is installed successfully and to reboot the system. When i reboot the system there is no grub screen and it directly boots windows.
I installed fedora core 11 on my laptop (dell inspiron 1525), which has windows vista already installed on it. After installation it says that the installation is complete and please reboot the system. When I reboot it is directly booting into windows. The os selection screen is not shown.
Dual boot installed Redhat enterprise linux 5 with windows 7 on a 64b machine. On reboot after loading some files the GUI doesnot show only a black screen and nothing happens.
The wubi installer copied files successfully and asked for reboot. After booting into Xubuntu the flashing logo appeared for a minute. And then the screen looked as if it was trying to show something but could not and flickered and then became dark this continued till half an hour and then I pressed Alt+Ctrl+Del.I tried all the modes but to no avail, only the last mode with command line was working. But it was not helpful for me becoz I dont know most of the commands.When I tried "Verbose Mode" as directed by the WubiGuide - Ubuntu Wiki, CTRL+ALT+F2 did not work when the installer stopped.The computer I use is assembled with Intel pentium 4, VIA chipset and Mercury(Kobian) motherboard.
