Fedora Installation :: Boot Freezes At Black Screen After Update
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
ADVERTISEMENT
Jun 30, 2010
I have just installed the latest update for Ubuntu 10.04, however upon requested restart i now boot to a black screen. the boot sequence is system post, followed by the generic Purple UBUNTU loading screen, following that you just get a black screen.
AMD x64
4Gb RAM
120GB Intel SSD
ATI RAIDON 3650
View 7 Replies
View Related
Sep 1, 2010
yesterday I updated the system, and that involved kernel 2.6.34.6-47.fc13.x86_64. After rebooting, the progress bar goes fine, but when finished the screen flickers a little and goes black. I can't switch to other terminals via Ctrl + Alt + Fx, so I'm using remote access via ssh. I thought it could be nvidia issue, so I updated kmod modules with rpmfusion-nonfree-updates-testing, and when booting nothing complains, but I'm still getting black screen. Xorg log doesn't seems to complain (no errors (EE)).
View 14 Replies
View Related
Apr 6, 2011
I installed Slackware 13.1 a little bit ago, played around with it, performed an upgrade with Slackpkg, messed around with some settings, and chose a new theme. I had set the runlevel to 4 and when I rebooted after choosing a new login theme the screen just went black at the point where the login prompt should have appeared. I couldn't even get into the CLI. Using a LiveCD, I set the run level to 3 again and was able to log in, but when I try to start X the screen goes black and freezes again, so I believe my new login theme is the culprit. Is there a way to change to the default login theme from the CLI?
View 14 Replies
View Related
Jun 25, 2009
I should have know, it's named after a windows "feature".On my laptop (Acer Aspire 5310) Fedora 10 offered me an automatic update to Fedora 11. Because I trust any automatic update Fedora brings to me (it's tested right) I automatically pressed yes. It started some downloads and everything seems to run pretty smooth. Then I had to reboot the computer, press that button as well.... and it reboots into Fedora 10 (untill the end of the bar). After that I have no clue what happens, because before X is started I get a black screen with nothing on it, even ESC doesn't do anything :O I don't even get the "_" to indicate the laptop is doing anything.
View 3 Replies
View Related
Jan 19, 2010
I cant boot fedora, i have installed windows XP and Fedora 12, i can boot XP, but when i try to boot Fedora, it show me boot screen to choose Fedora and Other, when i click enter on Fedora, nothing happens, just black screen :S I tried with "acpi=off", and it doesn't work :/
View 2 Replies
View Related
Sep 6, 2009
i did a preupgrade from fedora 10, i have a new line in grub with the "preupgrade to fedora 11" ... when i choose this.. anaconda run with the normal blue screen running anaconda... but a blacks screen apper with the mouse... the installation not follow and only the black screen with the mouse i can see...some line add to the kernel line of preupgrade fedora 11 to run with another graphical configuration
View 1 Replies
View Related
Nov 24, 2009
I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
View 9 Replies
View Related
Jun 1, 2010
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies
View Related
Mar 15, 2009
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies
View Related
Jan 20, 2010
I burnt the Ubuntu 9.10 ISO to CD and installed on a freshly nuked Dell 2350. It is pentium 4 at 1.8 MHZ with 512 RAM. Just a spare machine I have sitting there. Install went fine, restarted box, boot from hard drive. I get the little white Ubuntu symbol on a black screen and then a black screen with un-occupied white tool bars at top and bottom of screen and a functional mouse pointer, then nothing. It freezes there.
If I restart by holding the power switch in it occasionally shows multiple CPU overtemp messages and freezes with totally black screen. I can run the CD live and everything works like a champ. I'm going to like Ubuntu once I have this sorted out. If I boot from CD and choose the run from first hard drive option, everything loads and works fine. I was able to remove CD, update and save preferences, etc..
On one occasion, I was able to restart and boot from hard drive and it worked fine but usually it freezes at previously mentioned black screen with white bars top and bottom with mouse pointer. Please excuse my ignorance as I have very little knowledge of the inside workings of computers. I didn't even know about burning ISO's or changing boot orders until reading online. For what it's worth, the computer worked fine with no known hardware problems when it was running XP. It also is completely stock with no mods or added/replaced hardware.
View 4 Replies
View Related
Dec 14, 2009
I keep starting up the computer and I'm not able to get far (although it's not always at the same time) before my screen will go black, except it shows the mouse/cursor - but it's frozen, and then the caps-lock light starts blinking and I can't do anything or get it to recover. It ONLY occurs after I log in to wireless network. Using a wired connection, this problem never occurs.How do I stop this and diagnose this?I've tried, in the boot-startup to choose an older kernel version, but the same thing occurs! And this was working for months and now is not.
View 1 Replies
View Related
Nov 7, 2009
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
View 2 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Sep 2, 2010
My Machine: Lenovo T400 laptop, 9.04 ubuntu
My problem: while working on my laptop the system Offered an update to my ATI video card............so being the nube that I am I said go ahead and install it............yep that f'd it up. it ran for a while then froze up to the point I had to hard boot the machine. on restart the desktop splash/load screen displays but nothing else afterwards. I can get into restore mode and even terminal but can't seem to find anything........there is an autofix video option but that did not work either.
I spent a week loading and configuring this thing and do not want to start back from scratch...........I have too much stuff to lose on a new install. funny thing is that I just had set the system to do a complete backup of the ubuntu instance for tonight so I would have some way to restore this if something happened...........well it happend before the backup ran tonight........go figure.
Is there a way to reload the default system without loosing my files and such? I would just have to load vmware back on and some other programs but I a okay with that.
View 6 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Dec 4, 2010
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
View 3 Replies
View Related
Mar 3, 2011
Today brought some new updates. I did the updates and while not required I did a restart. Then it goes to a black screen with a solid white line in the top left corner (flashing). It does not boot. I held down the power button to shutdown. When I press the power button, I get the Dell splash screen, then it goes to a black screen with a solid white line in the top left corner (flashing). Nothing like this has happened before
View 9 Replies
View Related
Feb 11, 2010
I installed Karmic and the resolution was lower than I expected. I went to Admin and Drivers and the system stated I needed to activate the Nvidia driver. I did this and the system asked for a reboot.Now after Grub I get a black screen. I can hear things going on in the background and can even guess when to input my password, but all I see is a black screen.
View 1 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Jul 24, 2009
I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.
View 14 Replies
View Related
May 10, 2010
I just updated from FC 10 to FC 12 via install/upgrade disk, and when re-booted the screen is then black (at the point that it should display logins). I think it may be due to nvidia driver in FC 10 not being upgraded, because I think I compiled it from nvidia rather from yum install. Anybody else have this problem? BTW, it is a dual boot with Win XP, but has never caused a similar problem before.
View 8 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Sep 3, 2010
I have Ubuntu 10.04 installed on dell inspiron 5150. Original installation was perfect. Wireless Internet worked right away. Screen resolution was perfect. One day, after a month or so, after original installation I got a notification that new updates are available. So, I installed all updates. At the end there was a notification: Update is successful, please reboot. After reboot I got a black screen with the header:
GNU GRUB version 1.98-1ubuntu7(I hope it's not a ubuntu version of windows blue death screen). I could install 10.04 from scratch, but I can not do it after every update.
View 1 Replies
View Related
May 3, 2011
I tried to update my main computer from Ubuntu 10.0 to 11.04. I wish I could remember what it said, but it crashed during the update. The lights on the keyboard were flashing on and off as well. When I try to boot, all I get is a black screen and flashing lights. The Ubuntu recover also has the same thing. I am going to try a fresh install. For some reason I am leaning to the power manager, but I am no where near sure.
View 2 Replies
View Related
Feb 1, 2010
I just rebooted from an yum update, which updated my kernel 2.6.31-something to kernel 2.6.32-whatever-is-up-to-date-in-testing. My disk layout was LVM2+encrypted root. When I rebooted it prompted me for the encryption password as always. After I entered the correct password the loading screen (progress bar) finishes up as usual. Then, the screen is black.
It just stays in console resolution, but its just black. No typing, no chars, no X-mode, no errors, no VT-switches, nothing... just black. I remember to have started at 2.6.27-something and never had to kernel-update problems, so I dont know why it's annoying me now with todays update. I cant work with the machine any more.
View 4 Replies
View Related
Feb 23, 2010
I'm new to Fedora! My problem is this, I was updating Fedora using yum, the updates were in the process of installing when I got up and tripped over my power cord and of course cut power to my computer killing it and interrupting the installation. I plug my computer back in and boot it back up. I make it to the blue Fedora loading screen with the blank Fedora symbol that fills with white while loading; loads fine but before the user login screen appear Fedora melts down. The screen goes black, the cursor appears with the circle loading timer, and some form of terminal is there were I can enter text but no commands like SU or whatever seems to work.
View 4 Replies
View Related
Apr 27, 2010
I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.
View 2 Replies
View Related
Jun 8, 2015
I am attempting to get Debian+Mate running on my laptop, with no success. I have not yet used Linux, but I do wish to climb out of the Window, and the Live session seems ideal to get a feel for Debian before finally abandoning Windows.
I got the Debian+Mate ISO file from the Debian website, and created a bootable USB stick. (Note : I have done this several times, getting new ISOs, and using Unetbootin, Universal USB Installer, and Linux Live installer; the result is always the same.)
When I boot the USB drive, all appears good at first. I get to the Debian (or Mate?) screen which is a pale jade green with a white squiggle in the middle region, with a panel at the top; this shows at left three options - applications, places, and system; and at right the correct time, a sound symbol,the wifi symbol, and a battery indicator. At the left of the screen in vertical arrangement there are 4 icons labelled computer, users home, install Debian Sid, and trash. On the bottom panel, at left there is a "button" for "click to hide all windows & show desktop", and at right 4 squares for workspaces.
There are also (temporary) windows that inform me that the battery is no good (I run on mains), and that there is no wifi connection established. These windows disappear in a minute or so.
The cursor moves ok. The only actions that it creates are the information drop-down texts that tell me what the headings mean - e.g. no connections when I hover the cursor above the wifi connections symbol.
But whatever I attempt to do - selecting any of the options - nothing happens. Everything except the cursor appears to be dead.
The machine that I am using is an old laptop that I use as a second computer. It has a SIS Mirage 3 graphics engine, which I gather may be a problem. I also tried the same procedure with my fairly modern ASUS laptop (NVidia graphics) with exactly the same results; it seems that NVidia graphics may also be problematic, judging from some posts on the web. I have also tried Debian+Cinnamon, again with the same outcome.
View 5 Replies
View Related
Jan 8, 2011
after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies
View Related
