Ubuntu Installation :: Won't Boot / System Does Not Boot: "no Bootable Device?
May 19, 2010
Installed ubuntu 10.4 over previous ubuntu on Intel 945G. After installation and reboot the system does not boot: "no bootable device - insert boot disk and press any key".
Installation was done from USB-stick, prepared by UNETBOOTin. I have two HD's, one used for system + storage, another one just for storage. I manually deleted previous system partitions of previous ubuntu install in system HD. The system HD had about 1/3 of free and unallocated space for system partitions, which ubuntu installer created during the installation.
I tried to reinstall grub from bootable USB-stick and it succeeded but it did not help. The system is still not bootable.
I have used ubuntu for years and never happened something like this. Am I missing something or is ubuntu missing something???
HW failure is ofcourse possible but I am quite skeptical about it because Live ubuntu from USB-stick works well.
View 9 Replies
ADVERTISEMENT
Jan 2, 2010
i had a working multi-boot system, vista on sda1,2; swap sda3; ext=sda4; ubuntu sda5; fedora sda6; data sda7 - i mount the data partition when using all of the linux releases so i don't have to have multiple copies of music, docs, etc. everything has worked fine until yesterday. i tried to install fc12 on sda6, replacing fc11. it required me to format sda6 as ext4. i wasn't sure where i had grub installed, but have a backup of menu.lst in data (sda7), so figured i could let it install to mbr or wherever it wanted to by default. when the install completed and i reboot, i get a black screen and these messages: CLIENT MAC ADDR: 00 19 XX XX XX GUID: XXXXX PXE-E53:
No boot filename received
PXE-M0F: Exiting Intel Boot Agent.
No bootable device -- insert boot disk and press any key I tried reinstalling fc12, same exact errors. I then thought maybe the problem had something to do with ext4 partition mixed in with ext3's, so i installed mepis on the sda6, and let it write grub to mbr (i think, not really sure where it wrote it). anyway, i still get the identical black screen. no grub type menu or anything. the screen used to show "DHCP for a few seconds", but doesn't anymore after i disconnected the ethernet cable.........
View 5 Replies
View Related
May 13, 2010
Today I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies
View Related
Oct 7, 2010
I am dealing with a problem which I cannot seem to fix myself.I have a computer (age ~1 year) on which I am trying to install Ubuntu.The problem which I am facing is at the point of choosing to boot from the CD it says 'cannot find bootable device'.Note that this PC does not have a floppy drive and that I do not have a 1GB USB stick. I do have a 256MB USB stick.
View 9 Replies
View Related
Apr 16, 2011
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
View 9 Replies
View Related
Jun 1, 2011
Instructional post - medium difficulty. Installing on an older notebook (or other system) with no external bootable device available:No CD/DVD drive
No floppy
No boot to USB capability
No (usable) OS on HD
Solution went like this:Remove target HD from notebook.*
Disconnect HD from a desktop.**
[Code]...
View 2 Replies
View Related
Apr 16, 2011
My Toshiba Satellite 5205-S705 laptop with Win XP Home sp3 has a non-working cd drive, is riddled with viruses, and isn't capable of booting to a USB drive. (please no comments about paperweights etc., it's all I have!) I want to install a Linux dual-boot version that is heavy on antivirus scanning support. Since I can't boot to an .iso disk, is there any other way to do this? I can transfer files to it via USB thumbdrive or download via Internet.
View 9 Replies
View Related
Jul 26, 2010
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
View 1 Replies
View Related
Nov 10, 2010
When I first installed Ubuntu as a dual-boot (about 18 months ago), I had problems booting to XP, which were eventually solved for me in this thread, which set Windows to boot Ubuntu, rather than the other way round.
I've just had to do a fresh install of Maverick, following a major problem, and I'm back to being unable to boot XP. The error is different from before and I don't want to start guessing at what to do about it and screwing things up still further.
The GRUB menu lists Ubuntu first, then Windows XP. If I choose XP, it takes me to my previous boot menu, with Windows as the first option. However, selecting this gives me
Code:
Windows could not start because the following file is missing or corrupt:
<Windows root>system32
toskml.exe
Please re-install a copy of the above file. Windows and Ubuntu are on separate hard drives. XP was fine until I re-installed Ubuntu.
View 9 Replies
View Related
Jul 11, 2010
When I boot off of Debian Kernel 2.6.26-2-686. This is what happens. It stops at attached scsi generic sg5 type 0 After 4 or 5 minutes it comes back and says.
Gave up waiting for root device. Common problems Boot args (cat /proc/cmdline) Check Root= (did the system wait for the right device) Missing modules (cat /proc/modules; ls /dev Alert /dev/sdd8 does not exist dropping to shell /bin /sh: can't access tty; job control turned off If I boot off Debian Kernel 2.6.26-2-686 (single user mode) Then use Control-D it boots fine.
View 1 Replies
View Related
Sep 22, 2015
Debian 8 "Jessie"
AMD CPU
EFI motherboard
System was working reliably. Moved components into a new case. Now system will not boot. Either gives error that the disk is not bootable or displays the motherboard configuration screen.
I am able to boot Debian with a USB drive and have attempted fixes in "rescue mode".
I confirmed that the system is booting to EFI mode.
I have tried re-installing the grub-efi package and re-creating the Grub config file with update-grub.
When re-installing Grub I receive "Discarding improperly nested partition ..." warnings but the installation succeeds. I have searched this warning message and the forums seem to say that it can be ignored.
I have tried re-setting the motherboard NVRAM using the jumper block.
The computer shows "debian" as a boot choice in addition to the usual raw drive model listing. However, neither of the choices will boot successfully.
View 4 Replies
View Related
Mar 18, 2010
I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.
I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.
All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.
So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?
How SHOULD I set up the boot loader?
View 4 Replies
View Related
Jul 20, 2009
The server comes up after rebooting and after setting the hostname it starts setting up logical volume management. It says that 2 logical volume(s) in volume group "VolGroupOO" now active But then it starts to check the file system and errors with fsck.ext3: Device or resource busy while trying to open /dev/sdb1 [failed]
***An error occured during the file system check
***Droppping you to a shell, the system will reboot when you leave the shell
Give root password for maintenace
After I log in with the root I get the message mesg: error tty device is not owned by group 'tty' Can the forum tell me how to troubleshoot this issue so I can boot back up again? I have 2 harddrives in this server and only 1 drive was detected when I first installed CentOS. The error first appeared when I mounted the 2nd drive at the mount point /UserGeneratedData. drive was formatted with ext3 before mounting and did not have any data on it I don't want any software RAID if thats what seems to be going on with "VolGroup00"
View 4 Replies
View Related
Jan 29, 2011
I have dell laptop running with windows xp and im trying to install ubuntu 10.10 by booting it from a cd.
I verified the image I downloaded by comparing the hash and it worked out fine. I wrote the image into a cd and changed the booting priority on the BIOS to boot from the drive. When attempting to boot I get the "No bootable device found strike F1 to retry, F2 for setup or F5 to run onboard diagnostics" message.
View 1 Replies
View Related
Mar 3, 2010
Without going into a lot of the reasons, I have a bootable program on a USB stick that i would like to 'boot' when debian is starting up (or after it completes, or whenever it makes sense to do it). My MB does not support a USB boot, I've removed the floppy and CD so I can add additional HDs (its a small box but well ventilated).
Another option I have is to use my bios 'network boot' option, but I have no clue how to use it and the only description in the mb manual says "Allows system to be booted over a network" In network boots, *usually* one is given an option of specifying a device address, and the network boot executes a boot protocol (e.g. bootp), and the boot image file is downloaded to the target, stored and run out of RAM. No evidence of this behavior is exhibited when the network boot option is selected in the bios...
View 2 Replies
View Related
Aug 25, 2010
I used to have 2 HDDs for ubuntu: 1 x 80GB and 1 x 500GB The 500GB disk was my /home directory and is now used exclusively for Windows 7. I have now moved /home to the 80GB drive and have modified /etc/fstab to point /home to /home rather than /dev/sdb1. However, I cannot boot into ubuntu. I have tried using Super Boot Disk cd-rom but still no joy. I think I need to fix grub and have tried by booting into a Live-CD and following a tutorial I found on the forums but it complains about not being able to find a device.map I guess this has something to do with the fact that the 500GB HDD is now gonoe but am not sure how to resolve this issue. how to recreate this file but the command failed.
View 2 Replies
View Related
Dec 19, 2010
My old Dell Inspiron 9300's CD Rom is no longer working. I've written the files to my 8GB USB device, and attempted to boot from it. Whenever I try, I get this "No boot sector on USB device". I'm also using Mac OS X to make the USB drive.
View 3 Replies
View Related
Aug 18, 2011
I'm trying to install 11.04 onto a custom build pc.I have burned an install CD of the desktop edition and have inserted it into the drive, started up, and tried to run the live version. IT pops up, everything works, Hooray! I go to install it to disk and I follow all the prompts and it needs me to reboot to start. YAY! I click to reboot, remove the CD as requested, and then I get the "No Boot Device Detected!" error message.
I then tried installing straight from the CD and not booting into the live version. I follow all the steps and get a congratulations on installing it and all I need to do it reboot. I remove the CD, reboot, and BANG! the same message. I'm not sure what's up or even where I can get information from because there is no BIOS splash screen or anything to naviagate through.
System Specs:
Intel Atom Mobo/Proc (1.66Hz)
8GB Corsair RAM
1 slim optical drive (SATA)
1 2TB Seagate HD (SATA)
1 Case/PSU combination
EDIT1: Currently I am checking the live CD for defects (though it has an internet connection so I'm unsure whether the CD matters).
View 2 Replies
View Related
Apr 29, 2011
I tried upgrading to Natty last night through the update wizard and the install went perfectly... until I rebooted and it got stuck at a screen with an "_" in the top left corner of the screen and nothing else. I guessed that this was a grub problem, so I tried reinstalling grub2, but to no avail. So, I burned a Natty install CD and proceeded to reinstall, formatting the partition (/home was on another partition and did not get formatted). Again, the install went great, rebooted and this time I get "No Bootable Device - Please insert a bootable device and hit enter". So, again, I try re-installing grub2 from the live CD. I purge, uninstall, and reinstall grub2... nothing works! What the hell?
View 1 Replies
View Related
Nov 10, 2010
I am trying to install fedora 14 from live CD (USB boot) in my system which already has Windows 7. The installation goes fine however when I reboot the system I get 'No bootble device found' error. install fedora on the entire hard disk which I cannot do right now.
In Bios there are 'Native' and 'Legacy' options for 'ATA/IDE Mode' and if I select 'Native', 'Configure SATA as' option is enabled with options 'AHCI' and 'IDE'. I reinstalled fedora with all possible configuration, Legacy mode, Native + AHCI, Native + IDE but got the same error when booting. I have also tried options; MBR on /dev/sda and first boot record on /dev/sda5.
fdisk -l :
Device Boot Start End Blocks Id System
/dev/sda1 2048 78782463 39390208 5 Extended
/dev/sda2 78782760 211897349 66557295 7 HPFS/NTFS
[Code]....
View 1 Replies
View Related
Jun 30, 2011
I'm currently running Ubuntu (w/ GRUB) and Windows XP. I'd like to remove Ubuntu and run the recovery on Windows XP because it has started not running correctly. The computer is about 5 years old and I figured I'd just wipe it clean and start over (read: remove Ubuntu and reinstall windows via the recovery console).
I intend to follow the tutorial here: [URL]
However, I'm confused about determining the boot device number for Windows. I've run "sudo fdisk -l" and I can identify the windows drive in the list it says:
Device: /dev/sda1
Boot: *
Start: 1
End: 19352
Blocks: 155444908+
Id: 7
System: HPFS/NTFS
Am I looking for the 7, the 1, or something completely different? This is also the first partition on the list.
sda2 (id: c) is a FAT32 drive. I think this is the recovery partition included on the HP desktop.
sda3 (id:83) is Linux
sda4 (id: 82) is swap
I just need to run fixmbr.
View 2 Replies
View Related
Jun 30, 2011
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies
View Related
Jan 6, 2011
I want to install ubuntu 10.10 on my old laptop. I try to do this by usb stick, i came to the blue window boot device, there are 4 options to choose: Hard disk, cd-rom/dvd, floppy disk and lan boot. I tried all of them, but nothing happend.
View 5 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Jul 20, 2010
I just recently installed ubuntu 9.10 in my upstairs computer. It is a single boot system.Downstairs I have a dual boot system. I have windows vista and ubuntu 9.10 installed. It worked fine. I wanted to make this a single boot system and uninstall ubuntu 9.10. I cannot get rid of the grub bootloade
View 14 Replies
View Related
Mar 5, 2016
I am having a problem with my new Toshiba Satellite Laptop... I had installed debian for some time but last week suddenly stopped working.
- the computer stopped working at all... nor bios access.
- I did a new bootable installation in USB drive and downloaded the latest debian iso from official website and created the bootable device via dd as usual.
- I installed the new debian but after I removed the usb drive in order to boot into my new system. I was taken to a screen saying "Start PXE over IPv6 -- Start PXE over IPv4 ..." I followed several links looking for a fix, and all of them lead me to disable network boot option in BIOS setup...
- I disabled but after that it appears a new message "No Bootable device -- Press restart system" and nothing happens from there.
- I have found info in Internet regarding this issue, but all I find is "windows related"
- Someone recommended me this: "The BIOS can no longer recognize the hard drive as a bootable device. This could be for a number of reasons. Your best bet, if it is still under warranty, is going to be to bring it back to where you purchased it"
- But instead, what I did was to create a new bootable device, this time containing XUBUNTU and installed it to the machine, I had the good news that the installation proceed without any problem, so I could figured out that my machine it is still alive...
- Back to my issue and hoping that something unexpected happened that fixed the machine, I got back and did a new Debian bootable device, also hoping that the latest was corrupted or something, but after reboot to my new system... the problem persisted again.
- I chose to have 1 partition in full disk.
Now I don't know what else to do... I don't like ubuntu, I have used debian for some years and I want to keep using it and I would not like to be forced to move to ubuntu or xubuntu for this.
View 14 Replies
View Related
Feb 13, 2015
I'm inexperienced in Debian. I have a dual-boot machine (64-bit, Debian 7.3, Windows 7, legacy boot) and encouter a problem at boot ever since I completed the installation of Debian 7.3 alongside the exising Windows 7. This machine has six hard drives: two are intended for ntfs storage of general data (raided together by RAID1); two more are intended for ext4 storage of general data (also raided together by RAID1); the fifth contains the Windows OS files and the sixth contains the Debian OS files. The problem is that I arrive to the grub_rescue each time at boot, seeing the message:
GRUB loading.
Welcome to GRUB!
error: no such device: e081517b-3399-4067-9294-8f0686f753ca.
Entering rescue mode...
grub_rescue>
View 2 Replies
View Related
Apr 16, 2010
I tried to install F12 on my new IDE-HDD. The installation completed without any errors. But, when rebooting my PC I got a dark screen with error message: reboot and select proper boot device.
No BIOS boot up issue, since booting up using other hard disk running windows has no problem at all. I have set the hardisk jumper to master/primary, tried to re-install F12 a couples of time, but didn't make any difference.
View 2 Replies
View Related
May 20, 2010
I have installed Fedora 12 on my HP laptop which has got a NVIDIA graphics card. I have got latest F12 kernel 2.6.32 as well as default kernel 2.6.31.I have installed Nvidia Proprietary Drivers and modified grub.conf file for 2.6.32 kernel saying blacklist nouvaue so that it can load NVIDIA drivers ...After that I am able to successfully boot into 2.6.32 kernel with Nvidia Proprietary Drivers.Everything seems to be fine .. But suddenly today when I tried to boot into F12 2.6.32 kernel I got the following error
Code:
No Root Device Found
Boot Failed, Sleeping Forever
[code]...
View 14 Replies
View Related
Nov 30, 2010
just installed ubuntu 10.10 on my external usb hdd from my 8gb flash drive doing this on a laptop, my primary hdd (internal) is running windows (230gb of 250gb used) so i got an external hdd (2tb) and I decided to install ubuntu on it
[Code]....
View 1 Replies
View Related
