I have dell laptop running with windows xp and im trying to install ubuntu 10.10 by booting it from a cd.
I verified the image I downloaded by comparing the hash and it worked out fine. I wrote the image into a cd and changed the booting priority on the BIOS to boot from the drive. When attempting to boot I get the "No bootable device found strike F1 to retry, F2 for setup or F5 to run onboard diagnostics" message.
I tried upgrading to Natty last night through the update wizard and the install went perfectly... until I rebooted and it got stuck at a screen with an "_" in the top left corner of the screen and nothing else. I guessed that this was a grub problem, so I tried reinstalling grub2, but to no avail. So, I burned a Natty install CD and proceeded to reinstall, formatting the partition (/home was on another partition and did not get formatted). Again, the install went great, rebooted and this time I get "No Bootable Device - Please insert a bootable device and hit enter". So, again, I try re-installing grub2 from the live CD. I purge, uninstall, and reinstall grub2... nothing works! What the hell?
View 1 Replies View RelatedI am trying to install fedora 14 from live CD (USB boot) in my system which already has Windows 7. The installation goes fine however when I reboot the system I get 'No bootble device found' error. install fedora on the entire hard disk which I cannot do right now.
In Bios there are 'Native' and 'Legacy' options for 'ATA/IDE Mode' and if I select 'Native', 'Configure SATA as' option is enabled with options 'AHCI' and 'IDE'. I reinstalled fedora with all possible configuration, Legacy mode, Native + AHCI, Native + IDE but got the same error when booting. I have also tried options; MBR on /dev/sda and first boot record on /dev/sda5.
fdisk -l :
Device Boot Start End Blocks Id System
/dev/sda1 2048 78782463 39390208 5 Extended
/dev/sda2 78782760 211897349 66557295 7 HPFS/NTFS
[Code]....
I am dealing with a problem which I cannot seem to fix myself.I have a computer (age ~1 year) on which I am trying to install Ubuntu.The problem which I am facing is at the point of choosing to boot from the CD it says 'cannot find bootable device'.Note that this PC does not have a floppy drive and that I do not have a 1GB USB stick. I do have a 256MB USB stick.
View 9 Replies View RelatedI am having a problem with my new Toshiba Satellite Laptop... I had installed debian for some time but last week suddenly stopped working.
- the computer stopped working at all... nor bios access.
- I did a new bootable installation in USB drive and downloaded the latest debian iso from official website and created the bootable device via dd as usual.
- I installed the new debian but after I removed the usb drive in order to boot into my new system. I was taken to a screen saying "Start PXE over IPv6 -- Start PXE over IPv4 ..." I followed several links looking for a fix, and all of them lead me to disable network boot option in BIOS setup...
- I disabled but after that it appears a new message "No Bootable device -- Press restart system" and nothing happens from there.
- I have found info in Internet regarding this issue, but all I find is "windows related"
- Someone recommended me this: "The BIOS can no longer recognize the hard drive as a bootable device. This could be for a number of reasons. Your best bet, if it is still under warranty, is going to be to bring it back to where you purchased it"
- But instead, what I did was to create a new bootable device, this time containing XUBUNTU and installed it to the machine, I had the good news that the installation proceed without any problem, so I could figured out that my machine it is still alive...
- Back to my issue and hoping that something unexpected happened that fixed the machine, I got back and did a new Debian bootable device, also hoping that the latest was corrupted or something, but after reboot to my new system... the problem persisted again.
- I chose to have 1 partition in full disk.
Now I don't know what else to do... I don't like ubuntu, I have used debian for some years and I want to keep using it and I would not like to be forced to move to ubuntu or xubuntu for this.
Installed ubuntu 10.4 over previous ubuntu on Intel 945G. After installation and reboot the system does not boot: "no bootable device - insert boot disk and press any key".
Installation was done from USB-stick, prepared by UNETBOOTin. I have two HD's, one used for system + storage, another one just for storage. I manually deleted previous system partitions of previous ubuntu install in system HD. The system HD had about 1/3 of free and unallocated space for system partitions, which ubuntu installer created during the installation.
I tried to reinstall grub from bootable USB-stick and it succeeded but it did not help. The system is still not bootable.
I have used ubuntu for years and never happened something like this. Am I missing something or is ubuntu missing something???
HW failure is ofcourse possible but I am quite skeptical about it because Live ubuntu from USB-stick works well.
i had a working multi-boot system, vista on sda1,2; swap sda3; ext=sda4; ubuntu sda5; fedora sda6; data sda7 - i mount the data partition when using all of the linux releases so i don't have to have multiple copies of music, docs, etc. everything has worked fine until yesterday. i tried to install fc12 on sda6, replacing fc11. it required me to format sda6 as ext4. i wasn't sure where i had grub installed, but have a backup of menu.lst in data (sda7), so figured i could let it install to mbr or wherever it wanted to by default. when the install completed and i reboot, i get a black screen and these messages: CLIENT MAC ADDR: 00 19 XX XX XX GUID: XXXXX PXE-E53:
No boot filename received
PXE-M0F: Exiting Intel Boot Agent.
No bootable device -- insert boot disk and press any key I tried reinstalling fc12, same exact errors. I then thought maybe the problem had something to do with ext4 partition mixed in with ext3's, so i installed mepis on the sda6, and let it write grub to mbr (i think, not really sure where it wrote it). anyway, i still get the identical black screen. no grub type menu or anything. the screen used to show "DHCP for a few seconds", but doesn't anymore after i disconnected the ethernet cable.........
- Old laptop with only PATA
- Bought a PCMCIA ESATA card and a SATA SSD in an external enclosure
- Bios is too old to support booting from the PCMCIA device
I bought an SSD to speed things up a little, but having some issues.
Since I can not boot from the SSD, I thought I'd load the kernel from the old PATA disc and then mount / to the SSD.
== What i've tried: ==
(sda = internal pata)
(sdb = external ssd)
1. Installed ubuntu to sda with seperate paritions for /boot /var /srv and /
moyd@A:~$ df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda9 4804736 2012760 2547908 45% /
none 508764 376 508388 1% /dev
[Code].....
I installed Debian lenny 5.04 today through netinstall. After install it refuses to boot and says, "No bootable device found - "insert and press any key".
Motherboard : Intel DP35DP
Processor : Intel core 2 duo
RAM: 2 GB
NVIDIA 8500GT 512mb
I have googled it around and it seems to be something to do with BIOS. I am sure harddisk is not fried. Because I installed Ubuntu and it works
I'm installing Fedora 11 x86_64 from the DVD iso. The SHA256 checksum was fine, and the media checked out fine just prior to install. The F11 install seems to go perfectly and I get all the way through the installation. However, on reboot, I get this message, "No bootable device -- insert boot disk and press any key"!!!!I'm installing to an old Intel 975XBX2 motherboard with 4GB of memory, which I have used successfully, flawlessly for every single Fedora install since F6. I've only been using one hard drive with a FAT32 partition, and an NTFS partition for Windows XP, the remainder of the disk is Fedora.I've probably tried this F11 install about 8 or 9 times already with no success; actually, the installation seems to go perfectly, but I just cannot boot the PC. I think there's something wrong with GRUB being written into the MBR of the hard drive, because I cannot boot DOS on that FAT32 partition, I can't boot into the NTFS partition which contains XP, nor can I boot into F11.Anyone else having problems with the boot? I've been a long time Fedora user and was counting on the reliability of F11: Wondering if that Anaconda re-write had anything to do with all of these problems?
View 14 Replies View RelatedToday I installed Fedora (I need it for school), but not everything seems to work fine Before installing Fedora on my Macbook I had a triple booting machine: Mac OSX snow leopard, Windows 7 and Ubuntu. (using rEFIt) All of them where working. Since I installed Fedora on the 4th partition I can only boot Mac OSX. When selecting one of the other OS's it says: "no bootable device insert boot disk and press any key"
View 5 Replies View RelatedFirst off im very new to linux and have only been involved with linux for a couple days. Anyways, let me explain what i'm attempting todo. I want to make a DVD to automatically restore a partition without any human interaction other than inserting the dvd and turning the pc on. I'm using norton ghost 11.5 to restore the image and im using thinstation 2.2 as my OS.I have a cd that will boot up thinstation but then i would have to type in a command to have ghost start restoring the partition. so basically i figured i would put a script in the etc/init.d folder of initrd. so i extracted the contents of initrd using 7zip, put the script in the directory and then compressed initrd into .gz format. however now when i put the newly made dvd in i get stuck at "Booting the Kernel."
is this a problem with initrd format? if so what format does it need to be in and how to i get it into that format?is there some way to set the parameters of the kernel to fix this problem? and if so how do i go about doing that?
I've done an image according to:
[URL]
then I've copied it using:
Code:
# fdisk -l
Disk /dev/hda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1145fa35
[code]....
Ubuntu 10.04.1 to prepare a USB flash drive for use as installation media for a new computer that's on the way. When the Linux kernel tries booting up on the flash drive, I get an error saying VFS: Cannot open root device "<NULL>" or unknown-block(8,1).Here's how I got to this point...Created bootable partition on the thumb drive.Put the following files onto the flash drive: initrd.gz, vmlinuz, and ubuntu-10.04.1-server-amd64.iso fromhttp://archive.ubuntu.com/ubuntu/dis...ages/hd-media/Install Grub2 to the drive via grub-install.Put the following into boot/grub/grub.cfg:
Code:
set timeout=120
set default=0
[code]....
copy a compact flash card with a form of Linux on it (Found out it was custom version based on Fedora Core 3). The flaky USB card reader seems to have hosed the flash card, it shows up with unknown volume after ejecting the card and reinserting it. My troubleshooting: I have Ubuntu on a flash drive that I used to start all this to read the flash card.
- I tried Disk Utility to reformat the card as Master Boot Record and the volume as ext3 with flag set to Bootable and copied the files using cp in command line.
- I tried ISO Master & mkisofs to make an ISO that the USB thumb drive tools can use, but it wouldn't copy all the files. Looks like symbolic links either were ignored or couldn't find the source file with -f.
- I learned that I might need a boot partition with a boot image, which I think I have in initrd-2.6.14.7img, but I don't know how to do that. Do I also need a swap partition?
My updated goal: using the files from the flash card, make a bootable compact flash card with Fedora Core 3.
I have a joggler device and have Ubuntu installed on a USB drive. If that USB drive is the only thing plugged in it boots fine. If I plug another USB device it doesn't boot.
Now I am assuming this is a GRUB issue but I'm not really sure what to change and what I need to change it too.
I was told this by a friend: "probably need to change the grub.cfg where it states the boot device (hd0,x) etc".
How do I find out what I need to change it to?
Recently my Ubuntu 10.04 was booting slow and to figure out what was going wrong, I booted Ubuntu in text mode. There I found it was hanging on for 5-6 sec showing "unable to enumerate usb device to Port 1". I know it has something to do with Port1 / usb device, but could not understand and solve it.
View 3 Replies View RelatedI had a windows 7 professional on my computer. I tried dual booting it with ubuntu. While installing ubuntu when it asks which partition you want to install it "as it said your all data in the partition would be erased but not before you confirm" so I selected go back and aborted installation because I didn't wanted that and bang I start my system again an I get this error "no boot device found". I ran my hard disk test it say's passed so I don't think my hard disk is corrupted. I tried using windows 7 recovery disc but I guess it doesn't even detects a operating system on my laptop. I got no back up of my data. Any way to get back my data if I cant get windows back!
View 8 Replies View Relatedi decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I've installed Fedora 15 with Fedora 14 already installed in other partitions, but now I can't boot Fedora 14 as it prompts "no root device found", these are both grub.confQuote:
#boot=/dev/sda
default=0
timeout=120
[code]...
creating a bootable floppy from a bootable floppy image on a NON Linux machine I am trying to install dsl (damnsmallLinux) on one of my old Compaq 2000 Deskpro machine having 256RAM and 2 GB hardisk. (which I hope to increase to 8 or 10 GB ...can I use a larger disk capacity??) I have downloaded the floppy bootable image from the website using a machine a fedora OS machine that does not have a floppy drive. I have even converted the image file to an iso file. I can copy this image file or iso file to the Compaq machine but how do I use it as a bootable floppy? OR how do I create a bootable floppy disk from this image?
View 6 Replies View RelatedI have a cdrom (bootable) that I want to copy over to a usb stick, and have THAT boot the system (Adding other files to it before hand) I know it's easy, but how? I've already made a iso of the cdrom.
View 2 Replies View RelatedHow can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
View 5 Replies View RelatedIf I dd copy a bootable usb drive to an iso will the iso be bootable?
I haven't tried it yet, but i'm going to. Heres the situation and tell me if I'm crazy.
I have several bootable CDs I use at work to do different things, so I went ahead and made a multi-boot usb stick with the isos on them and everything is golden. When i need something else, I am able to slap the ISO on the usb stick, edit the menu.lst and I'm good to go.
The problem is, for some of our equipment I have a bootable USB stick that I have to use. I tried copying the files on the bootable USB to my multi-boot usb and setup grub to boot it (which admittedly I'm no expert at), but have had no luck.
So now I'm thinking, I'll use dd to copy the bootable USB stick to an iso (using bs=2048) and then do my normal setup with an ISO and maybe it will work.
I have slackware on a bootable flash drive, and the pc onto which I want to install slack won't boot from a flash drive. So how do I burn a bootable set of CDs from my flash drive?
View 2 Replies View RelatedI am currently using fedora 11 kernel 2.6.29 version, i wanted to write device driver for usb to detect my own device. My project is radio with computer. My fm radio get connected to usb port so i need to write h/w interfacing program.
View 1 Replies View RelatedI own a legit Windows XP Home CD, with time its getting more scratches so I want to make an ISO backup. I tried Brasero but the ISO it creates doesn't seem to be bootable. I don't mind using GUI programs, but I'd prefer to know the command line programs to learn more .
View 9 Replies View RelatedI have managed to install Ubuntu on an 8GB USB flash drive using the usb creator, it boots up well no problem though it does seem to stop and idle a bit in the middle of the booting process.I noticed that after installation I only have about 2GB of free space left, how much is Ubuntu chewing?!!!
I'd like to create a bootable Ubuntu system that doesn't take up that much space, and doesn't prompt me with liveCD stuff (ie. country, installation methods etc). I was thinking of Moblin remix. I'd like the more basic Ubuntu configuration with the default device drivers to hook up to the internet, display and peripheral devices but not all the software if that would keep the size down.
I installed Ubuntu 10.10 inside Windows 7 today, Ubuntu 10.10 finished installing and all just fine
but when I try to boot into Ubuntu 10.10 from the boot menu I get this error
"gave up waiting for root device" while booting
and it mentions something about BusyBox
I have a WinXP ISO file and was wondering which is the most noob friendly way to creating a bootable USB with it to re-install XP onto my netbook via Ubuntu 11.04.I haven't found any tutorials out there explaining anything on the lines of this.
View 3 Replies View Related