Fedora X86/64bit :: Boot After Install Gives Kernel Panic Failure
Aug 19, 2009
I was finally able to install Fedora 11 x64 after choosing to only install packages from the repository on the install DVD. Prior to that when I had chosen tio install from the default online repositories, the install itself failed with a Python exception ( see my other post ). Now, however, once I boot after the install I eventually receive a kernel panic message, and failure. The exact same thing happened with CentOS 5.3 x64 after a flawless install. So unless someone knows what might be going on I will assume that Fedore, Red hat, and offshoots for x64 bit systems are just not for me. I have been able to successfully install the latest Mandriva and SUSE x64 Linux distros so whatever Red Hat/Fedora has done just does not work on my system.
View 3 Replies
ADVERTISEMENT
Jun 15, 2010
I have recompiled a few kernels, but all on 32bit systems so not sure if that has anything to do with it.
Running Arch Linux 64bit, most recent version.
Kernel Output:
Code:
My first thoughts was that it might be my grub bootloader configuration, so had a big play around with that but it didn't fix it. Also made sure support was built for filesystems. However almost all that Fstab mounts are ext3 anyway, and certainly the root and /boot are. Now thinking it may be a memory error so will run a check when I shutdown.
View 3 Replies
View Related
Jul 17, 2010
this is what i did i downloaded the latest stable kernel archive from kernel.org and extracted the archive into the download directory (i don't think that matters though) then i downloaded and installed the ncurses archive (needed for menuconfig) then i opened a terminal and navigated to the directory that was extracted from the archive and issues the floowing commands
View 9 Replies
View Related
May 2, 2010
I learned yesterday that doing a massive upgrade on my system while moving was a BAAAD idea.The upgrade process was going along just fine, it was all downloaded and was actually installing that last time I saw it. I unplugged my laptop to move a bookcase out, and completely forgot to plug it back in. After I got back from moving a load, I found my computer was off. I tried to boot up, and I got an error that kind of freaked me out. It reads as follows:
Code:kernel panic not syncing vfs unable to mount root fs on unknown-block(0,0)I'm able to get to grub just fine, and my windows partition loads up just fine, but any of the linux kernels fail similarly when I attempt to load them.I'm sure that I can fix this, I just have no idea how. Probably has something to do with a live cd.
View 3 Replies
View Related
Apr 27, 2010
i recently buy an MSI 770-45 motherboard with 4gb (2x2gb) Gskill 1600Mhz Ram. The CPU is an athlon2 x4 620, everything tested and working fine except i can`t get lenny or squeeze 64bit linux running because of kernel panics when creating ext3/ext4 partitions during install or running fsck on the system i installed on another PC and moved to this one. The boot shows a screen related to IOMMU problem saying must enable it in bios but no option related to it and no memory remapping also. The question is how i can get IOEMMU working with 4gb of RAM (if i remove one of the two modules everything is fine). I`ve tryed ioemmu=memapper/off/noagp/soft and any thing i found on the web, moving to test debian installation was my last hope really before starting to use the 32bit one, i am planning to add more RAM which with this version is just can`t be.
View 3 Replies
View Related
Nov 26, 2009
It appears that I have really messed up my machine. I was trying to get matlab working on FC 11 and I ran into libc.so.6 issues, so I put an older file libc.2.3.1.so in /lib/tls/ directory and created a symbolic link libc.so.6 to see if the application would work. Unfortunately at the same time the system did some updates and the system hung, so I ended up rebooting, but now it gets stuck at boot screen (after grub) with a kernel panic - not syncing: attempted to kill init.I just need a way to get to the directror /lib/tls and delete the link and the older .so file I threw in there. How do I get this accomplished. I cannot get even to a shell from the boot screen.
View 3 Replies
View Related
Dec 8, 2010
I am trying to install Fedora on my computer but I am getting a kernel panic at liveCD boot after boot menu. It occurs to me for F13 and F14 (all x64, F14 x86 seems to boot fine but I'm trying to host a x64 guest OS on it so I need to get the x64 version to work)
My system specs:
Dual Opteron 265
4GB RAM
Asus K8N-DL (nVidia nForce Pro 2000, BIOS 1010)
I also tried to install F14 in some other computer (which worked flawlessly) and put the HDD into the computer in question, which gave me the same kernel panic.
View 2 Replies
View Related
Nov 1, 2010
I am trying to install linux kernel manually, for this I had compiled linux-2.6.36 with minimum drivers and features. Note that ext2, ext3, jffs file system support and sd ata_piix drivers are set as inbuilt kernel modules.
I had two hard disk for my Intel x86 box sda and sdb. I have running linux on sdb from which I can access sda. sda has one partition sda1 as ext3 fs.
I had created following directories at sda1 root, bin, boot, etc, sbin
After compiling kernel, I had copied bzImage, system map files to boot folder. then using 'grub-install' I had installed grub on sda. after installation I edited grub.conf to setup kernel image.
grub.conf
Code:
After this I booted sda by changing HDD boot priorities,And wow I got grub prompt -- linux kernel booted but as soon as it tries to mount file system it dies with error,
Code:
I accept that I dont have binaries for init and no initialization stuff in /etc, but I think problem is I am not able to give correct rootfs to kernel.
View 3 Replies
View Related
Jan 7, 2010
I just installed Fedora 12. When I boot, only the following three lines are printed: pnp 00:09: can't evaluate _CRS: 12298 ACPI: Expecting a [Reference] package element, found type 0 Kernel Panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) I first installed Fedora using a RAID 1 setup that mirrored each partition, so I thought the problem was coming from GRUB and confusion from what to boot off of. However, I reinstalled Fedora using a simple single drive setup (left the second drive without any partition), and the same error was returned. Is this an ACPI issue with this particular motherboard/BIOS? Any ideas for how I can fix this?
View 1 Replies
View Related
Dec 8, 2009
Just got the latest kernel update 2.6.31.6-162 for fedora 12 64bit and it won't boot on my PC. I just get a black screen with some text that doesn't mean anything to me. Computer is a s775 E7200 with nvidia 730i/9300 integrated graphics. I am NOT using hardware graphics drivers at the moment, having decided to stick with Nouveau drivers for a time. What system log tools do I need to identify the problem?
View 2 Replies
View Related
Jan 2, 2010
I've decided to switch one of my workstations from debian to fedora and I have some issues that I would like to discuss. I've installed the fedora 12 from a live cd and everything worked fine but when I use yum to install software the caps lock key blinds and my old acer 1.5 celeron laptop freezes. Using lmsensors I've noticed that the cpu temp is miniumun 60 degrees and the cpu fan is always on. I've used google and found some ways others tried to resolve this but none worked.
I thing it's a kernel bug so I want to know how to collect all the data.
View 1 Replies
View Related
Aug 20, 2011
I woke up this morning and my fedora 15 install caught a kernel panic over night. See pic attached.
View 4 Replies
View Related
Mar 24, 2011
How do I install an additional kernel in Linux Ubuntu 10.10, in case of a boot failure? Also how do I make the Grub Menu Visible, so that I am able to select multiple kernels. There is an older solution below, but is there a way to do this in Linux Ubuntu 10.10. I just suffered an update failure, possibly due to a corrupt kernel upgrade, which made my system unbootable. The cursor just flashed continuously.
Solution of 2007[URL].... "The next obvious rescue aid is to always have a working kernel installed. I usually work from a kernel updated via yum. Kernels have occasionally been released with flaws that have caused one or more of my machines to not boot. To this end, I always make sure I have at least one perfectly running kernel on a machine. A great way to handle this is to first add plugins=1 in your /etc/yum.conf file. The next step is to take this script (written by Jeremy Katz from Red Hat) and save it as n-installonly.py in /usr/lib/yum-plugins. You can change the number of kernels to retain on the system by changing the tookeep variable (default = 2).
With a known working kernel on your system, you can upgrade safely. If the new kernel is hosed, simply boot the old kernel to solve the issue with the new kernel be it to remove it, recompile it, or update it."
View 3 Replies
View Related
Dec 7, 2010
I have just updated my kernel and immediately struck trouble. The kernel update is marked as security update.
When booting I get a multiple warnings " deprecated config file /etc/modprobe...", then "no root device found" followed by "boot has failed, sleeping forever"!Clearly something is amiss with this update, so figured the best thing might be to remove it and wait on a fix, but attempting to remove the kernel via the package manager would cause a whole lot of other packages to be removed as well.Instead, I edited grub.conf, commenting out all the kernel-2.6.34.7-63 lines, so that the default is now the previous kernel (2.6.34.7-61).
View 14 Replies
View Related
Jun 16, 2011
I upgraded the kernel of my machine with a yum update, and now it will not boot. I am running Fedora 14 on a 64 bit machine. I really really need it to boot. Help!
I did Ctrl+Alt+F2 and managed to log in. I have kernel x86_64 2.6.35.12-90.fc14 installed. How do I log in as usual? I never get to a login screen.
View 4 Replies
View Related
Mar 14, 2010
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
View 9 Replies
View Related
Dec 31, 2008
I have the following strange thing with a RHEL4 installation. Since last week, the system did a reboot and now something is really fucked up. During boot we get the following messages (don't care about 'strange' typo's, my colleague typed it 'blind' from the screen)
Code:
The strange thing is that we never see a 'could not mount blabla' or similar messages. First we thought it was a failing kernel update by plesk, but even after manually updating the kernel with RHN RPM's, still the same message. Booting with rescue mode and then chroot the system works. After that we even can start things like plesk and so on.
We double checked things with another RHEL4 install, and at least two things were odd:
1: the working machine has /dev/dm-0 and /dev/dm-1, the broken one doesn't
2: some files on /dev didn't have group root, but 252
We tried to recreate the /dev/dm-X nodes with [vgmknodes -v], output:
Code:
A fdisk /dev/sda shows: /dev/sda2 XX XXX XXXXX Linux LVM (I removed the numbers because this line is from another machine, but rest was identical)
We have a copy of the boot partition so if one need more info please let me know.
grub.conf:
Code:
last part of init extracted from initrd-2.6.9-78.0.8.ELsmp.img:
Code:
View 3 Replies
View Related
Mar 15, 2010
I had FC10 working nicely but decided to move to FC12 to be able to use the latest and greatest... Turning out to be nightmare!
My HDD is partitioned into three:
(hd0, 0) 100MB : used to be original /boot for FC 10
(hd0, 1) 120GB : /home
(hd0, 2) 30GB : /
> First thing tried: preupgrade
Using this preupgrade setup happend and asked to reboot. However, upton reboot got locked in stage2. So this option was abondoned.
> Second thing tried: installation CDs
Using this method formatted (hd0,2) and installed FC12 on (hd0,2). However, did not change anything on (hd0,0). This still held all the upgrade information from the previous trial. Now, when I rebooted after the install there was a kernel panic with error "kernel panic not syncing vfs". Thinking it might due to the (hd0,0) partition and errors in my install, I abandoned this.
> Third thing tried: installation CDs
Using this method I formatted both (hd0,0) and (hd0,2). The install was similar to above but now (hd0,0) was also formatted and after install was empty. But upton reboot I still got the "kernel panic not syncing vfs" message. I dug through google and saw references to problems in grub.conf and lo behold there were problems with my grub.conf. I don't see the initrd line at all nor do I see the initrd*.img file in my disk. The grub.conf is:
---
default=0
timeout=0
splashimage=(hd0,2)/boot/grub/splash.xpm.gz
hiddenmenu
[Code].....
View 3 Replies
View Related
Mar 29, 2009
Ive loaded 64studio (hda6) grub in MBR, and fed10 grub on its partition (hda8), but from Studio it seems i cant Mount fed10 files to look at the Kernel path from MBR. (studio did not auto pick it up, like it did for Mandriva on hda7)
Does anyone know what it is ? something like kernel /boot/vmlinuz.....and Initrd(hd0,7)/boot.initrd.img .....then i can Edit menu.Lst in MBR grub.
View 4 Replies
View Related
Oct 17, 2010
I've downloaded 2.6.36-rc8 vanilla kernel, then I copied .config file from my current working kernel 2.6.32.21-168.fc12.x86_64, then I've configured, compiled and installed kernel like this:
Code:
make gconfig
make -j4 all (or make all)
make modules_all
make install
The last command edits my grub.conf file and writes this:
[Code]....
I checked my .config and ACPI, and File Systems are built into kernel and not loaded as modules... And, I have LVM but my /boot partition isn't in it, so I don't HAVE to use initrd, right? How can I boot from a vanilla kernel without initrd ?
View 11 Replies
View Related
Feb 11, 2011
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
View 14 Replies
View Related
Jun 1, 2010
I got a new laptop, this is the one: [URL] and decided that I wanted to go with Fedora instead of Ubuntu with this computer. The laptop runs win 7 64 bit so I'm trying to go with Fedora 64 but it will not boot. I first installed Fedora 12 64 bit from the DVD install and it would go to grub fine but when I boot the fedora os It just stops in the middle of the boot script. When it stops, the last 4 lines are:
kernel_init=0x1fd/0x257
child_rip+0xa/0x20
? kernel_init+0x0/0x257
? child_rip+0x0/x20
I hadn't messed with it for a few weeks and yesterday I saw that 13 was out, so I downloaded and burnt the Fedora 13 64 bit CD. I popped it in, booted the computer and it did the same crap. It didn't stop at the same line but it was around a line with:
? kernel_init
So I guess the kernel isn't loading properly or something. Do ya'll think I would be better off using the 32 bit?
View 4 Replies
View Related
Jun 25, 2010
I am running an Hp Pavillion dv6000 with the Broadcom card that never seems to work for Linux. I recently talked with my friend who said he found a way to get it work.following his instructions I opened Synaptic and checked the package bmcwl-kernel-source to be installed.I went through the process of it all and it said it had install successfully. I restarted the computer and when I tried to enter my operating system I got this error "Kernel panic - not syncing : VFS : Unable to mount root fs on unknown - block(8,1)"
I have previous versions of Linux on my computer so I can still get in to those if need be but I don't know how to undo what I did or why it isn't working for that matter. Does anyone have any ideas as to why I am getting this error and how I can fix it?
View 2 Replies
View Related
Sep 2, 2010
i used dual boot system (xp + ubuntu 10.04) and decided to replace them with jolicloud os and then it started In about 86% of jolicloud install it showed me error of hdd partition. I tried different versions of partion type, used also option to install on entire hdd - none of my tries actually worked (also with many hdd formating tries) so I was able to use only usb as live user for Jolicloud, and i burned ubuntu iso on disk - on boot up showed boot up error, i checked BIOS and everything seemed to be ok with boot order. So after many tries i took my old Gutsy Gibon 7.10 live cd. I first updated it with LTS version (8.04 Hardy Heron) and after that I updated it to 10.04 but it seemed to not finish when i saw some error in terminal and installer was exiting 13 minutes before finish then it had kernel panic - fuuuuck! After that i tried to download small versions of linux like Austrumi and puppy linux , but it showed me boot error or cd didnt even open install dialog without showing boot error.
View 1 Replies
View Related
Apr 7, 2010
Edit: The PC is broken and I'll buy a new one. Don' bother reading this thread.
I have Kubuntu 9.10 installed on my Acer 7520g laptop. It used to work fine.
But recently my laptop has often went into kernel panic, sometimes at boot, sometimes after hours of normal usage. Today it has not been able to boot properly from HD a single time.
When I boot it up in recovery mode, it kernel panics and displays this (normal mode displays just the graphical progress bar, no text):
Code:
00010c0f
[ 9.620019] TSC f0ed3f8e6
[ 9.620019] PROCESSOR 2:60f82 TIME 1270650316 SOCKET 0 APIC 0
[ 9.620019] This is not a software problem!
[Code]....
I'm sure this is a pure software problem, because Ubuntu 7.10 LiveCD boots up normally and I got X, Gnome and everything working. So CPU must be working perfectly.
I read the logs in /var/log but there were no error messages.
View 4 Replies
View Related
Jan 12, 2010
I prepared a ISO from ubuntu 8.04.3 server using which kernel 2.6.24-24-server.My installer file is in initrd is
iecho Preparing to install
cd /
mount -nt tmpfs tmpfs tmp
iecho partitioning hard disk, creating filesystem
mknod /tmp/sda b 8 0
parted --script /tmp/sda mklabel msdos
parted --script /tmp/sda mkpartfs primary ext2 0 -- -0
parted --script /tmp/sda set 1 boot on
iecho configuring filesystem
mknod /tmp/sda1 b 8 1
tune2fs -j -i 6m -T now /tmp/sda1
iecho mounting filesystem
mount -nt ext3 /tmp/sda1 /mnt
iecho mounting CD-ROM
mknod /tmp/hdc b 22 0
mkdir /tmp/cdrom
mount -nt iso9660 -o ro /tmp/hdc /tmp/cdrom
.
.
.
.
My menu.lst file is
title *****1
root (cd)
kernel /boot/vmlinuz-$(uname -r) acpi=on
initrd /boot/initrd.img-$(uname -r)
title ******2
root (cd)
kernel /boot/vmlinuz-$(uname -r) acpi=on
initrd /boot/initrd.img-$(uname -r)
title ******3
root (cd)
kernel /boot/vmlinuz-$(uname -r) acpi=on
initrd /boot/initrd.img-$(uname -r)
When I try to boot from new ISO, It does not found my HDD and gives error.
View 2 Replies
View Related
May 21, 2009
I decided to try Linux recently. I downloaded CentOS-5.3-i386-bin-DVD.iso. Installation was successful but the OS reports Kernel Panic while booting. At first I can see messages:
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not usin MMCONFIG
The OS continues to boot, but then shows kernel panic.
I tried to solve this problem during several days. I've installed the OS at least 10 times changing conditions. I tried x86-64 version, disabled PAE in BIOS, performed manual partitioning without LVM. The result is the same.
My PC has Intel Core 2 Duo E8400 CPU (no overclocking), 4GB RAM (DDR2-800), ATI 3470 GPU. Windows is working smoothly on it, I can encode video during several hours without problem. All fans are working, the system is not overheated. MemTest86 showed no errors.
I've installed CentOS on my laptop (Core 2 T5600 CPU, 2GB RAM, Intel G945 Video), it works nice, i like it very much.
For testing I've installed OpenSUSE 11.1 on the PC, everything is ok, I'm writing this message from it.
View 7 Replies
View Related
Feb 9, 2010
I installed mythbuntu from a live CD on an old machine with an IDE hard disk just to play with it. It worked a treat, so I bought an Acer Aspire Revo R3610 and used dd to copy the old HD contents to the new one, and then gparted to resize the ext4 partition.
On boot I got - Kernel panic: VFS: Unable to mount root fs on unknown-block(0,0)
I checked every grub2 command and it all looked fine. I then tried booting the original kernel that the live CD installed (2.6.31-14) and it booted! I tried 2/6/31-17 again, and got the panic.
After much googling, I found a suggestion to do - sudo update-initramfs -k all -c -v and this worked.
Is this expected behaviour? One of the delights of Linux is that installs move smoothly between machines, but this one didn't. Was this due to the old machine using IDE and the new one AHCI SATA? How do I get an initramfs that's flexible and will boot smoothly on any given hardware?
View 1 Replies
View Related
Mar 9, 2011
We have not actually purchased support on a 2nd seat yet, so I can't go to them for this yet, and purchasing the seat may be silly if the machine can't run the OS.
I have tried several times to install RHEL 6 workstation onto a server machine. It has a dual drive RAID filesystem, whose configuration I had nothing to do with. The install procedes nicely but Displays a mdam error 127 before shutting down for the first real boot.
When booting a weird progress bar with at least 3 colors proceding at different rates displays for about 5 seconds followed by a very verbose kernel panic error which mentions tainted swap and scheduling while atomic. I suspect the error that caused the mess runs off screen too quickly to record.
Does anybody have a clue what might be happening? Even if I install minimal this happens so it appears to be a very low level hardware problem rather than a corrupt package.
I should mention that the machine runs on ubuntu 10.10 just fine, but my Lab PI wants to run it as a redhat system.
View 3 Replies
View Related
Nov 12, 2010
During boot from CentOS5.4 DVD and after choose linux rescue mode, encounters with error:
Code: 8b 5e 04 83..... ........ 3d c0
EIP:[<c0417656>]__modify_IO_APIC_irq+0x40/0x62 SS:ESP 0068:df94eed4
<0> Kernel panic - not syncing : Fatal exception
View 3 Replies
View Related
