Fedora X86/64bit :: Boot From A Vanilla Kernel Without Initrd?
Oct 17, 2010
I've downloaded 2.6.36-rc8 vanilla kernel, then I copied .config file from my current working kernel 2.6.32.21-168.fc12.x86_64, then I've configured, compiled and installed kernel like this:
Code:
make gconfig
make -j4 all (or make all)
make modules_all
make install
The last command edits my grub.conf file and writes this:
[Code]....
I checked my .config and ACPI, and File Systems are built into kernel and not loaded as modules... And, I have LVM but my /boot partition isn't in it, so I don't HAVE to use initrd, right? How can I boot from a vanilla kernel without initrd ?
View 11 Replies
ADVERTISEMENT
Nov 29, 2010
i want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
View 4 Replies
View Related
Apr 9, 2010
I am trying to compile a vanilla kernel that I got from git in a VirtualBox VM running Fedora 12. With RHEL (albeit on real hardware, not a VM), I am able to do a make; make modules_install; make install and simply able to boot up the kernel. The make install step, in particular, creates the initrd using /sbin/installkernel, which also updates the grub configuration.
Under Fedora 12, my new kernel does not boot. I see no messages on the screen, not even if I change the boot command line to remove quiet bootup. I see disk usage on the VM and the CPU gets pegged at 100%. Strangely enough, if I change the initrd to refer to an existing, Fedora-provided kernel, I can boot my new kernel without any problems. I started with a Fedora kernel config and used it to generate the config for my new 2.6.33 kernel, so it couldn't be the case that I missed something in the config either.
Does anybody have an idea about what could be going on? Is there some specific patch that Fedora kernels use that are essential for booting up?
Also, the guest Fedora OS is 64-bit, if that is relevant.
View 2 Replies
View Related
Jun 29, 2011
Im using a Fedora 15 and im trying to compile a 3.0.0rc5 kernel. but im unable to get a config for my machine to boot up. i tried make localmodconfig it says
using config: '.config'
capifs config not found!!
Restart Config
and then i tried cp /boot/config-2.6.38.6-26.rc1.fc15.i686.PAE .config to override the default config but stil that doesnt work. work around to get a proper config so that i can boot the latest kernel here?
View 1 Replies
View Related
Apr 29, 2010
I thought I would give some instructions on how I compile my kernels. My long-time windows user parts trader recently asked me how to compile a kernel on Fedora. He was confused with all the tutorials requiring you to build an RPM, so I showed him how I do it, the standard/easy/lazy way. Before I start, here are a couple things I assume. I assume you are a Fedora user and that you are NOT in text mode, but in GNOME. I also assume you realize that this can take up to SIX HOURS on an old Pentium 3 1.3Ghz. Remember that some proprietary drivers as well as some free ones are not included in the kernel, so make sure you don't delete your existing one.
First get the dependencies you need.
su -c "yum -y install gcc ncurses-devel"
Next get the kernel source. I use 2.6.33.3 as an example. To download it, click here.Extract it by right-clicking on the file and then choosing extract here. This will take about five minutes. Now open a terminal, become root, and cd to the directory linux-2.6.33.3. It is important to cd here and not to the kernel directory inside of there, even though make has an extra variable that specifies there.
Now we need to configure the kernel before we build it with make O=kernel menuconfig. It will take a couple minutes to set up, then you will be presented with a cheap psuedo-gui in your terminal. Just select exit and yes to save your config. You usually don't need to change anything here.
Ready to compile and install? Remember this can take up to six hours, and your machine may become VERY slow. It is not recommended that you attempt to use your machine with this in progress. OK then. As root, in the same directory, type:
make O=kernel && make O=kernel modules_install install. This will compile the kernel and install the kernel and it's modules. Done? Now change the kernel and initrd in your bootloader to match the new kernel. If you ever want to reuse the same source code folder, use make mrproper to clean things up and build it again.
View 6 Replies
View Related
Jul 13, 2009
I'm I seeing this wrong or is the initrd file in kernel-2.6.27.25-170.2.72.fc10.x86_64 a zero byte file and that's why I can't boot with it( get this "kernel panic not syncing VFS unable to mount root fs on known -block (0,0)" message)
View 2 Replies
View Related
Sep 21, 2010
Suddenly, after installing, boot was failed.
[Code]...
i was surprise, because in initrd-2.6.34.7-0.2-default all was ok.
View 2 Replies
View Related
Mar 29, 2009
Ive loaded 64studio (hda6) grub in MBR, and fed10 grub on its partition (hda8), but from Studio it seems i cant Mount fed10 files to look at the Kernel path from MBR. (studio did not auto pick it up, like it did for Mandriva on hda7)
Does anyone know what it is ? something like kernel /boot/vmlinuz.....and Initrd(hd0,7)/boot.initrd.img .....then i can Edit menu.Lst in MBR grub.
View 4 Replies
View Related
Feb 11, 2011
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
View 14 Replies
View Related
Aug 19, 2009
I was finally able to install Fedora 11 x64 after choosing to only install packages from the repository on the install DVD. Prior to that when I had chosen tio install from the default online repositories, the install itself failed with a Python exception ( see my other post ). Now, however, once I boot after the install I eventually receive a kernel panic message, and failure. The exact same thing happened with CentOS 5.3 x64 after a flawless install. So unless someone knows what might be going on I will assume that Fedore, Red hat, and offshoots for x64 bit systems are just not for me. I have been able to successfully install the latest Mandriva and SUSE x64 Linux distros so whatever Red Hat/Fedora has done just does not work on my system.
View 3 Replies
View Related
Jun 1, 2010
I got a new laptop, this is the one: [URL] and decided that I wanted to go with Fedora instead of Ubuntu with this computer. The laptop runs win 7 64 bit so I'm trying to go with Fedora 64 but it will not boot. I first installed Fedora 12 64 bit from the DVD install and it would go to grub fine but when I boot the fedora os It just stops in the middle of the boot script. When it stops, the last 4 lines are:
kernel_init=0x1fd/0x257
child_rip+0xa/0x20
? kernel_init+0x0/0x257
? child_rip+0x0/x20
I hadn't messed with it for a few weeks and yesterday I saw that 13 was out, so I downloaded and burnt the Fedora 13 64 bit CD. I popped it in, booted the computer and it did the same crap. It didn't stop at the same line but it was around a line with:
? kernel_init
So I guess the kernel isn't loading properly or something. Do ya'll think I would be better off using the 32 bit?
View 4 Replies
View Related
Jan 21, 2009
I had to uninstall f10 from my system because it would lock up my system anywhere from 1 to 5 minutes into using it and noone could tell me why.
NOW, I put 9 back on my system and after it updates everything, it locks up again. it does give me the option of the new kernel and the original install's kernel and if I choose the original to boot with, I don't have any problems.
SO, is there any way to fix it, OR to exclude the kernel and initrd from being updated?
View 3 Replies
View Related
May 24, 2011
What is vanilla kernel and what distributions are using it?
View 3 Replies
View Related
Jun 13, 2010
I am trying to compile a new vanilla kernel on to my Ubuntu server system which has been freshly installed with Ubuntu 10.04 server 32bits. As this will run on a VIA epia-px5000eg mainboard with USB stick I want compile this kernel on a different machine on which is also ubuntu 10.04 installed. Unfortunately currently I experience difficulties when I boot kernel 2.6.34; it says "Kernel panic - not syncing: VFS: unable to mount root fs on unknown block" while if I load to original kernel that comes with Ubuntu 10.04 all works perfectly well. BTW reason I want to build a custom vanilla kernel is to trim down kernel to the necessary services I need as I am running a server that requires just the essentials. And it needs to support the VIA Epia CPU processor family ( C3, C7 or generic setting which is another hurdle which I won't discuss here ).
Hopefully one out there is able to guide me further as I type step by step what I executed. Thanks for your replies in advance:
Yet I hook up the VIA epia-px5000g with 2gb usb stick, a dvd drive and keyboard ( all usb ). Boot from CDrom and install a minimal system (<f4>) to usb stick. Partitioning part I set it to EXT4 and used full size thus no SWAP. Also mount option " noatime " has been set all to save writes to usb stick.
When the base system has been installed a user has been added, as well apt is being configured to install only security updates automatically. As services I want to run definitely openSSH-server so I can access remotely. Grub gets configured and system will be rebooted.
At this stage I configure the network interface to a static address so I do not need to check my router all the time which dhcp address Ubuntu is using if I want to access remotely.
Now the compile part starts, the ubuntu way. I log in to my other system and execute following commands accordingly code...
View 2 Replies
View Related
Mar 12, 2009
The RHEL 4 update 7 installation CD installs the kernel with version 2.6.9-78.EL and therefore must contain corresponding vmlinuz and initrd.img. However I would like to have an all modules initrd that is used during installation but for a different version (2.6.9-78.0.13.EL). Is there a way in which I could obtain/make such an initrd?
View 3 Replies
View Related
Jul 16, 2009
I install fedora on my usb-hdd. Sometimes i boot it from real machine, sometimes i boot from virtual machine (kvm). When I boot from real machine, hdd driver is usb-storage, when i boot from virtual machine hdd drivers are ata_generic and pata_acpi.
Everytime i update kernel, mkinitrd only create initrd image contains only hdd driver current running, and I must recreate initrd manual with all preload hdd driver. How to config fedora to everytime update kernel, mkinitrd can make initrd image with all hdd driver I need?
View 2 Replies
View Related
Dec 13, 2010
which vanilla kernel version provide support for QM57 chipset?
View 1 Replies
View Related
Apr 30, 2011
I've getting strange build errors when using make-kpkg with the latest (2.6.39-rc5) vanilla kernel.I'm using the procedure outlined here:
https:[url]....e.g.:
Code:
make oldconfig CONCURRENCY_LEVEL=`getconf _NPROCESSORS_ONLN` fakeroot make-kpkg --initrd --append-to-version=-custom kernel_image kernel_headers
I'm getting the following build errors:
Code:
Building modules, stage 2.
MODPOST 3053 modules
WARNING: modpost: Found 60 section mismatch(es).To see full details build your kernel with:'make CONFIG_DEBUG_SECTION_MISMATCH=y'
CC arch/x86/crypto/aesni-intel.mod.o[code]....
There is even much more error output but it looks like it is basically the same issue.
View 2 Replies
View Related
Jul 16, 2009
So, I had fun with this one the past week. I had an FC11 system running just fine. Then one day it would not boot - it was hung somewhere inside the init script of the initrd image. CTRL-ALT-DEL would reboot the system. Using grub editor, I could temporarily delete the initrd line and boot into the system OK. But what was going on?
mkinitrd was of no help to me. I even did a yum update, which got a new kernel, which also generated a new initrd - no joy. I extracted the initrd file system and edited the init script. I eventually hit on this tidbit: If I commented out this line:
daemonize --ignore-missing /bin/plymouthd and rebuild the initrd image - the system would finally at least tell me what the problem was: mount failed for selinuxfs on /selinux. No such file or directory.
So, I examine the root (the real root, not the initrd temporary root) - and sure enough, no /selinux. I make one and reboot. The system goes into a "targeted policy relabel" operation, reboots, and I am back in business - even with my original, unmodified, initrd.
I have no idea what happened to my /selinux directory, but I think the initrd "init" script needs to check for this directory's existance, and make it if necessary. Or at least report that it isn't there. In FC11 right now the system just HANGS without this directory being present, without any clue as to what the problem is!
View 1 Replies
View Related
Dec 17, 2009
i upgraded from 11.1 to 11.2. Unfortunately the new kernel does not work with my sata/southbridge (i googled and figured its a known issue). So i tried to boot a 11.1 64bit rescue system to install the older kernel and the corresponding initrd. The problem is, that i cant find the kernel and initrd on the rescue system.
View 2 Replies
View Related
Apr 8, 2010
I've changed for huge kernel to a generic+initrd setup per the instructions in the README.initrd file however my machine fails to boot using that method. I get the following errors:
/boot/initrd.gz: Loading kernel modules from initrd image:
mount: mouting /dev/sda2 on /mnt failed: No such device
ERROR: No /sbin/init found on rootdev (or not mounted)
1. I've created the initrd using the results from /usr/share/mkinitrd/mkinitrd_command_generator.sh
mkinitrd -c -k 2.6.33.1 -f ext4 -r /dev/sda2 -m usbhid:ehci-hcd:ext4 -o /boot/initrd.gz
2. my root fs is ext4 on /dev/sda2
3. I've changed all necessary links in /boot
4. I've changed my /etc/lilo to:
image = /boot/vmlinuz
initrd = /boot/initrd.gz
root = /dev/sda2
label = Linux-Generic
read-only
View 12 Replies
View Related
Mar 26, 2010
I need to install Ubuntu on approximately 50-60 netbooks. None of them have CD drives, and I don't want to have to install them individually, walking around with a USB stick. I figured the fastest way to install on so many machines is to use a combination of apt-cacher (http://www.debuntu.org/how-to-set-up...ith-apt-cacher) and netbooting. I have successfully booted one machine to test, but as soon as the kernel comes up, support for the network interface is gone. Specifically, the "atl1c" module is not included on the netboot initrd image. Also, I would like to try to use preseeding, and I need to get that onto the initrd as well.
So, to summarize my question: How can I create a custom install kernel and initrd? I have a feeling it's related to the "debian-installer" category in the package repository, but I have not found any good documentation about doing this.
View 2 Replies
View Related
Apr 27, 2011
Is there an easy way to upgrade kernel to 2.6.38?
Or do i have to compile a custom kernel?
View 3 Replies
View Related
May 18, 2010
When I compile a custom kernel with this command: make-kpkg --initrd kernel_image kernel_headers and then install the .deb, there's no initrd in /boot and I have to create it manually. I've thought that the --initrd option should take care about this, but somehow it doesn't.
It behaves like this for about two years at least (since I've compiled my first kernel). Of course, it's no big deal to create it manually, I was just wondering whether do I do anything wrong or whether should I fill a bug report..
View 1 Replies
View Related
Feb 25, 2010
So I'm building a custom kernel cuz I want the fbcondecor patch in my kernel. I use the same .config that 2.6.32 debian kernel package comes with. This kernel runs perfectly. I pass --initrd to make-kpkg when building the package but no initrd is built when I install it so I have to make it using "mkinitramfs -o /boot/initrd.img-2.6.33 2.6.33" to get it to boot. Now when I try to build the nvidia drivers it complains it can't find the source. I did build kernel_headers and installed them also the source is in /usr/src/linux. I also tried to specify the path by passing --kernel-source-path= to the nvidia script but no change. What is going on? I've done this fifty times before and never had any problems. Has there been some changes to how debian kernel packages are built? EDIT: Just thought I'd add some info about the steps I took.
Code:
tar xjvf linux-2.6.33.tar.bz2
ln -s linux-2.6.33 linux
cd linux
patch -p1 < ../fbcondecor-0.9.6-2.6.33-rc7.patch
cp /boot/config-2.6.32-trunk-686 ./.config
make menuconfig Loaded .config then I removed support for maxtorfb, tile blitting and some sirrusfb thing, nothing thats relevant to my system. Changed cpu from Pentium 4 to Core 2 and added framebuffer decor
support from my patch, exited and saved. Then:
[Code]....
EDIT2: I have now tried to build 2.6.32.8 in the same way with the same strange results, anyone have any thoughts as to what I'm doing wrong just throw it at me, I'm getting desperate and running out of ideas. I've checked all the kernel source symlinks and everything looks good.
View 7 Replies
View Related
Mar 8, 2009
The only error message I am able to retrieve is in the GDM 0.log as follows:
AUDIT: Sat Mar 7 17:58:27 2009: 5034 X: client 9 rejected from local host ( uid=500 gid=500 pid=5066 )
View 6 Replies
View Related
Jun 12, 2009
I downloaded 64-bit version of Fedora 11 and burned the iso on my dvd. When I rebooted the machine it booted up from the dvd but it showed an error message that kernel "image not found". And it stops there itself. Can someone show me some way except downloading the iso again?
View 1 Replies
View Related
Apr 2, 2010
I am running fedora 12, x64. How can I upgrade fed12 as such? (apart from compiling the kernel myself)
View 3 Replies
View Related
Sep 17, 2010
Google answers attempted:
# grep lm /proc/cpuinfo
# uname -m
# file /sbin/init
# file /usr/bin/file
I don't think none of the above gives deterministic answer. Since I have 32-bit & 64-bit different system all of above spit out the same info.
View 5 Replies
View Related
Sep 30, 2010
I upgraded my F13 kernel from 2.6.33 to 2.6.34. But, the newer kernel isn't booting. It starts the booting process and then goes idle. how shall I troubleshoot?
View 2 Replies
View Related
