Is there any possibility to move my already installed ubuntu linux to the usb flash and make it bootable. So that it would boot on the other machine?I have an installed ubuntu karmic linux installed on my machine. I want to make it portable, to move it with all installed packages and tuned software to a usb-flash drive.
View 2 RepliesI wish to create a bootable disk for my existing grub legacy. I do not have a floppy drive. Could this be done on a CD-RW or flash drive?
View 1 Replies View RelatedIt seems that the canonical instructions for making a bootable USB flash drive that runs memtest are at:
[URL]
However, after following them to a T, I boot up the new machine and get:
"could not find kernel image: linux"
Do I need to set up a lilo.conf first?
I would like to boot Ubuntu 8.04 i386 from my USB flash drive. [URL] I took following steps:
1) made sure that usb_storage.ko kernel module is loaded
Code:
root@martin-desktop:~# lsmod | grep -i storage
usb_storage 39585 1
root@martin-desktop:~#
2) inserted USB flash drive
Code:
root@martin-desktop:~# tail -n0 -f /var/log/messages
Jan 29 01:43:23 martin-desktop kernel: [440650.637531] usb 2-2: new high speed USB device using ehci_hcd and address 8
Jan 29 01:43:23 martin-desktop kernel: [440650.776107] usb 2-2: configuration #1 chosen from 1 choice
[code].....
When I set "USB flash drive" as a first bootable device in BIOS, I get SYSLINUX "boot:" prompt and it loads both "vmlinuz" and "initrd.gz", but finally I end up in BusyBox prompt and following message:
Quote:
"Check root= bootarg cat /proc/cmdline or missing modules, devices: cat /proc/modules ls /dev ALERT! does not exist. Dropping to a shell!"
Last boot message which I see is "Attached scsi generic sg2 type 0".what might cause such behavior? Did I miss anything while preparing USB flash drive?
I have a laptop that I need to update the BIOS but I cant get into Windows. Here is what I want to do.I know I need a DOS boot able disk. I figured I would download the FreeDOS disk and just add a file to the iso and burn the ISO. So far I cannot do that and I don't know how or even if there is a way to do this. So the long of the short of it is I need a bootable cd that is dos based and has my BIOS update file on it.
View 2 Replies View RelatedI have a USB drive of 4 GB and I want to make the drive as bootable. I used the command /sbin/mkbootdisk --device /dev/sdb1 "kernal version" ( sdb1 is my pen drive).When i ran this cmd,it gave me an error saying not enough space to write.
View 3 Replies View RelatedDid anybody tried installing the latest adobe flash named Square for amd64 systems? I was interested in knowing whether there is any improvement in the performance. I also want to know how to replace my existing 32 bit wrapper based flash on 64 bit browser and install this 64 bit flash.
View 5 Replies View RelatedThe performance of my suse install under Virtual Box is starting to affect my work, and I really need access to my real multi core CPUs - can I take my vm and stick it on a bootable SD or external HD?I've read the howto move existing linux installation to usb-flash and make it bootable? but it didn't work for me (I'm not convinced I copied correctly).
View 1 Replies View RelatedI have successfully installed 11.04 onto my existing Windows laptop as files contained in the windows system and have dual booting.I would like to copy this installation to a 5gig fast usb stick so that I can retain all my settings etc
View 2 Replies View RelatedI have downloaded imgburn, then downloaded ubundo from hippo site. somehow sonic was also downloaded. I did not know what choice to make when it came time to burn a cd....now I can't get back to those choices....I am trying to make a bootable cd to install in a sonic laptop without an operating system. If by downloading ubuntu on my c/drive have I changed my os in any way...I have a hp compaq desktop computer using windows os..I am on a network with my husband
View 3 Replies View Relatedi have installed ubuntu on a virtual machine. i have also installed it on a hardisk partition. i have edited some package files and install the packages. it works great. now i want to ship this whole thing to my client. Can anybody tell me how could i make a bootable ubuntu cd so that my customized file are there in the cd and when the client installs ubuntu from this dvd he will get all the cusotmized packages preinstalled
View 2 Replies View RelatedI created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
I've searched extensively on Google and here and can't seem to find anything addressing what I'm trying to do. The motherboard of my notebook (Ubuntu 9.10) completely died earlier this week. I pulled the hard drive and got an external case for it. Is it possible to have it boot into my original Ubuntu via USB?
Trying to do so as-is comes up with multiple Grub errors (Invalid Environment block, file not found, etc.) and I've tried addressing these Grub errors separately with no luck, but I have a feeling I'm skipping a basic step somewhere to make a primary drive USB bootable without reformatting.
I want to install Ubuntu to a USB Flash drive (so I have my Desktop everywhere and can customize it as I want). I'm still choosing what's the best filesystem for the USB; Ext2 with no journaling or Ext4 with journaling but performance increase? I know that journaling will probably reduce the life of the USB flash drive dramatically, so is Ext2 the obvious choice? Or is it a bad idea to install Linux (Ubuntu probably) on a USB Flash drive? I tried running a live CD from the USB drive, but it wasn't very customizable - which is the point of carrying my OS with me.
View 3 Replies View RelatedMaking a live CD using tools such as livecd-creator seems like a good solution to create a bootable read-only image to install on Compact Flash. My goal is to prevent failure due to write cycle limits of Compact Flash memory. A secondary goal is to have the live CD available for troubleshooting. However, Usenet postings indicate challenges in making the live CD image on CF bootable. Has anyone succeeded in doing this?
View 3 Replies View RelatedI need to make a bootable USB stick.
1) How to format it with ext3
2) How to make a master boot record
3) How to create a files system
4) How to put syslinux, syslinux.cfg and a real kernel on the stick
I have never worked with Linux before but as part of my new job I need to format and install a program on a compact flash card. I have followed our procedure to the T but when i install the card I get a No bootable partition error. Here is what I'm doing. I go into Gnome terminal and change to my directory to "cd dcmsetupdir" (this may not be important but I want to give as much info as I can. Then I type "sudo ./format_cf". once this is complete (no errors detected), I type in "sudo ./install_cf" this seems to install correctly but when I boot up the unit with the card in I get the no bootable partition error.
View 7 Replies View Relatedis there any program that i can run under ubuntu 10.10 netbook remix and make windows XP installable from a flashdrive via a torrent i downloaded. i need to install windows back on this computer then reinstall linux and dual boot for work.
View 14 Replies View RelatedI would like to get my system installed with all the software I seem to need to use and get everything all running the way I want it to and then make a dvd which will include all the items in my install. I want to be able to help a friend put his computer on Ubuntu with the same items installed I have but he is not able to get on the internet with anything other than a slow dial up connection. He also has to take his computer to his parents house to allow it to go on line so I would like to make a live dvd for him to use to try my setup and also be able to use the dvd to install it on his own computer.
I am not so good at the command line yet so this might be beyond my newbie abilities right now, but I would like to know if it is possible to do this. I assume if he has a computer where drivers are needed by Ubuntu it might be necessary to go on line to make the system work anyway, but it is worth a try I think. Also I would like this dvd so I can install my existing system on my other machines without going through all that downloading again. As another side issue, how does Ubuntu find drivers for the different computers it installs on? Can I also find the drivers my friend might need and put them in a certain directory where Ubuntu could find them during the install?
I noticed that when using the "daily built images" from Squeeze via Netinst, during the disk partitioner, I am un-able to make the /boot partition bootable.or some reason I can't enable the 'boot' flag on several different ISO attempts and differenthardware vendors. The only thing I can see is that this is an issue with the netinst ISO image from the daily built images. Has anyone seen this or is this a known issue / bug? I don't want to file a bug report if possible but I searched and couldn't find anything on this. I doubt I am the only one who's experienced this so far.
View 11 Replies View RelatedI downloaded the Fedora-15-i386-DVD.iso and want to install Fedora 15 from it. I don't want to use the LiveCD version since it doesn't have all the packages. So I follow the tutorial given here under the section titled "How to Make a bootable USB Drive to Install Fedora instead of using a physical DVD ". Everything finishes off well. However. when I boot my computer using the USB, it says "USB doesn't have operating system. Safely remove and reboot".
Now, what to do? I also didn't get the line the tutorial saying, "You should now have a bootable USB stick which will run an 15 install. When you boot the stick, you may also add askmethod to the boot line and select a hard drive install and select the drive as /dev/sdb1 (or your USB device drive) and the path should be / " What am I supposed to do?
I want to make a live USB drive, perhaps even 1 with its own GRUB and a choice of operating systems..Its 16gb so it will fit..or maybe just install multiple desktop environments so I can switch depending on the resoruces of the computer I am using..Gnome>E17>LXDE.But I want it to be a regular account with a root/administrator password, ect. When I use the Startup disk creator or Unetbootin I find that the results are pretty limited. I might as well be using a live CD, but thats not ideal. Alternately, when I just install normally it doesnt always load, even when I hit F8 and tell it to boot from my USB drive.Knoppix based distros seem to work better than Ubuntu based distros in this regard, but I dont want Knoppix I want Ubuntu/Mint and friends.Finally, I have sometimes been having problems 'mounting' or using 'swapon'. Even when I turn on Swap with Gparted Im still not getting the benefit of the large swap area I have created..is this because of how the operating system uses swap? Is there a live distro that will save files and settings to swap before using up ram, by default? If not, is there a way to change the behavior of Ubuntu Live CD?
Is there a reason why we cant make proper paragraphs? Is this site strapped for bandwidth or something? Is the site just acting funny?
I have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
View 8 Replies View RelatedI have a bootable Linux compact flash card and want to copy it to an SD card. What would be the easiest way to do this?
View 2 Replies View RelatedI have an Intel Core2 Duo system that I want to upgrade from Fedora 12 to Fedora 14. I have downloaded the DVD iso for Fedora 14, however, I do not want to burn a DVD for installation, and would like to be able to perform the upgrade from a USB flash drive. Where can I find information that will explain how to make a bootable flash drive that can install Fedora 14?
View 14 Replies View Relatedcopy a compact flash card with a form of Linux on it (Found out it was custom version based on Fedora Core 3). The flaky USB card reader seems to have hosed the flash card, it shows up with unknown volume after ejecting the card and reinserting it. My troubleshooting: I have Ubuntu on a flash drive that I used to start all this to read the flash card.
- I tried Disk Utility to reformat the card as Master Boot Record and the volume as ext3 with flag set to Bootable and copied the files using cp in command line.
- I tried ISO Master & mkisofs to make an ISO that the USB thumb drive tools can use, but it wouldn't copy all the files. Looks like symbolic links either were ignored or couldn't find the source file with -f.
- I learned that I might need a boot partition with a boot image, which I think I have in initrd-2.6.14.7img, but I don't know how to do that. Do I also need a swap partition?
My updated goal: using the files from the flash card, make a bootable compact flash card with Fedora Core 3.
how to make bootable pendrive
View 5 Replies View Relatedi have been doing a house clearance and come across an old laptop nothing special but its old running windows 95 i think any way i have used dsl b4 as a bak up incase my pc went dawn haw do i get rid of windows and run dsl on this laptop as it only has a floppy drive and a 2.5 gig hard drive its a relik i know this but instead of throwing it away i thout that putting dsl on it i could make a web browser out of it just for fun is it possable to make a bootable floppy to run the new os on the laptop.
View 5 Replies View RelatedI have a linux ubuntu pc with superuser access, and a windows xp pc with no administrator access so I cannot make use of any formatting tool in that.
View 10 Replies View RelatedRunning Squeeze here. I added a new SSD to my system. Root is /dev/sda3 and I want to clone that system to the new SSD on /dev/sdb1 and make it bootable. I tried:
mount /dev/sdb1 /mnt/ssd_root
cp -dpRx / /mnt/ssd_root
then
update-grub
or
grub-install --recheck --root-directory=/mnt/ssd_root /dev/sdb
but to no avail. I cannot get the new system to be bootable and available through Grub. Part of the problem is that I do not know my way around Grub v2 so well, I could probably manage quite well with legacy grub. So, whats the easiest way to clone a system and make it bootable on another partition? Should I be using debootstrap, and importing/exporting the package list to install the same packages on the new system as the old? or is using cp -dpRx to copy the old ok? How do I make the new system boot?