i have puppy 4.2.1 installed on my hdd and have frugal installed a older version inside the existing puppy and would like to add it to the existing GRUB menu
View 6 RepliesI want to upgrade from another distro to ubuntu server for a few reasons. The only problem is I have a lot of data that needs to survive. here is how my computer is setup. I've 5 drives on the computer,
A- 10gb drive for OS and swap only, no data
B,C,D,E - 4x 500 GB drives in a LVM. they make up one large drive with xfs and this volume has about 1.2 TB of data. there is nothing fancy on it, no encryption and no software raid of course the little 10gb drive can be formatted no problem, but the LVM needs to be migrated over intact.
I have installed ubuntu 9.10 and everything was working fine. Just a minutes ago a window popped up telling me that a complete update couldn't be completed, and asked me to go on with a partial update. I did it and then a window popped up (I think it was debconf running) asking me if I wanted to delete phpmyadmin database configuration or if I wanted to keep it... seemed like the updater was removing quite a bunch of packages!
After that I was presented with a long list of packages to be removed (among them apache2, php5, linux headers, etc.) I thought it was going to remove them in order to reinstall them latter, so I let it go) but now there's no ubuntu entry in the grub menu, so I had to boot with windows! Right now I'm downloading ubuntu 9.10 livecd to give it a try...
My problem is this, I decided to try Pardus since I had the disk space available and learned that it never created a entry for Ubuntu 9.10 64-Bit. I have tried many different boot options and have only gotten it to show the first black and white bootsplash but never can continue to boot. Is there a option I am forgetting to add via Pardus's GRUB editor or is it something else?
View 3 Replies View RelatedI want to avoid kernel id in Grub entry. I have searched before and one poster (can't find it again) posted a very simple Fedora Grub entry that just pointed to Fedoara's menu.lst. which worked.
For Suse I use:
title openSUSE 11.1 (on /dev/sda7) by symlinks
root (hd0,6)
kernel /boot/vmlinuz root=/dev/sda7 splash=silent showopts vga=0x31a
initrd /boot/initrd
savedefault
boot
I nave tried:
title Fedora
root (hd0,4)
rootnoverify (hd0,4)
chainloader +1
Where Fedora is on sda5 but, doesn't work for some reason.
I currently dual boot and wish to know how to remove the Windows partition/drive while still allowing Ubuntu 9.04 to load safely as my main OS. I know how to restore windows partition by;
If MBR gets damaged boot from MS Windows Xp disc, Select "R" for "recovery console", select main windows installation drive (admin password usually nothing, just press enter) and type "FIXMBR" this will allow you to boot windows again, but Ubuntu partition will be unbootable and require installing ubuntu again to dual boot.
But this leaves Ubuntu partition Un-bootable as it removes the grub menu, how would I do the same for Ubuntu and make window partition un-bootable so I can remove it?
Ubuntu's update manager recently updated the Grub menu.lst file. It let me decide if I wanted to keep my old menu.lst or the new one. After deciding that I was fine with the new one, I found out that I can no longer boot into Windows 7. I had previously edited menu.lst so that Windows would be at the top of the list, however, I didn't notice that this had put it into the automagic update area, and I realize now that I should have just edited what the default number was instead of moving around the entries.
Anyways, I can no longer access my Windows 7 OS via Grub, and I was wondering what sort of fix I can have for this. I've tried running update-grub, but it hasn't fixed the problem. The Windows bootloader is on the first partition of the only hard drive, as far as I can remember.
How do you append text to an entry in an existing file? For example, lets say I have a file called "env.logon" in /home/myself/bin that contains the following text:
PATH=/bin:/sbin If I wanted to add, via command line, ":/usr/bin:/usr/sbin" to the PATH= and I
used the "echo" command (echo "PATH=:/usr/bin:/usr/sbin) it would create a second entry and my file would look like:
PATH=/bin:/sbin
PATH=:/usr/bin:/usr/sbin
What I want is for it to look like:
PATH=/bin:/sbin:/usr/bin:/usr/sbin
Is there a way to get this result via command line?
I have just installed Debian and the installation went smooth (net installation). The last prompt was to specify if you want to be able to boot 3 different OS's using grub. I answered yes (I have Win7, Ubuntu and now wanted to install Debian for testing purposes). Is there any way I could manually add entry to grub for booting Debian, for instance from Ubuntu adding to menu.lst?
View 2 Replies View RelatedI successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
I have been successfully triple-booting Windoze and 2 varieties of Linux on my desktop for some years now with very few problems. The latest configuration which I have been using for 6 months or so is Kubuntu 10.04 & Ubuntu 10.04. The last version installed was Kubuntu 10.04 and on installation it's version of grub found Ubuntu 10.04 no problem (other than a minor problem with partition numbering which was manually fixed) and all was well.
I have just upgraded Ubuntu 10.04 to 10.10 (by clean install rather than version upgrade) and the new grub from Ubuntu 10.10 will not start the existing Kubuntu 10.04, I just get "error: file not found".The grub.cfg file from Ubuntu 10.10 is completely different (copy attached) but the partition references & numbers etc. are correct so why will the existing Kubuntu 10.04 not start ? Windoze starts OK.
#
# DO NOT EDIT THIS FILE
#
[code]....
I have a dual boot config with
sda1 /boot
sda2 Win7
sda3 /
sda4 Truecrypt Partition
i have grub1 working and chaonloading truecrypt loader if i choose "win7" in grub1 menu I want to install a new kubuntu (no upgrade) I have read that that there are problems with grub2 and truecrypt actually a bug that grub2 dont chainloads truecrypt boot loader many ppl seem to have problems with grub2 then i read somewhere that ubuntu install is not asking for grub2 to be installed and just installing it. is this right?
i think at least for the alternative install cd its wrong. i installed it on another pc and it asked me! it works for win7 and Ubuntu and i guess its grub2 but there is no truecrypt installed anyway, i wanted to ask is the live cd installer asks me for grub2 and what is the best and easiest way to stay with my grub and just change the menu.lst to the new kernel (i guess there will be one)
I've just got another sata HDD and thought lets put in a nice install of Fedora 14 having tried out the live CD over the weekend. Right my system is configured thus
[Code]...
will Fedora 14's install program make an addition to the existing GRUB configuration or will it do something different Yes I have searched.... and looked at the installation documents....
I currently have 10.04 installed as my primary OS. I also have windows 7 and Ubuntu 10.10 Alpha installed. I would like to be able to play around with the 10.10 without any risk of damaging my 10.04 install. However, it seems grub2 control was transfered to 10.10. How do I return control to my original distro?
View 2 Replies View RelatedHave 3 linux distros on 3 hard drives. lost one distro from boot loader. how do I restore missing distro to boot loader? drive was not written to when one distro (drive) was updated.Example drives a, b, and c each had listing on boot loader, now after upgrade to distro on drive b order on boot loader is drive b then a and none for c.
View 5 Replies View RelatedI am actually facing a vague problem here. I was previously running Windows XP and Ubuntu . Ubuntu was installed Windows XP The problem is
1. First I tried to do some disk partitioning. That ended up with some error.
2. Ignoring that, I went to install Windows 7 over Windows XP but I was not able to proceed with Windows 7 , because the partitions were corrupted.
3. So I used Ubuntu LIVE CD (Grub was lost at this point )and used 'testdisk' and recovered the partitions.
4. Now installed the Windows 7 successfully.
5. Now again I moved to Ubuntu Live CD to write the GRUB. After which I tried restarting
6. Now Ubuntu is booting perfectly as before. But the problem is with Windows
7. The GRUB loader instead of showing Windows 7, it shows Windows XP !!! . and there is no other entry for windows. When I tried opening it, it says "error, cant read file" and further inout moves back to the grub loader list again.
"How do I change the entry to Windows 7 from Windows XP and boot Windows7 successfully " I tried it a couple of times, same thing happens . So how to change the entry?
I just installed archlinux to try it out and need to add the entry to Grub.
I formated the hard drive with the a root partition for arch of 42Gb and ubuntu can see it perfeclty.
When I was installing arch I made a mistake and installed grub again, overwriting my previous grub with my ubuntu and windows entries.
So I fixed and got my working grub back with SuperGrubDisk, but now I want to add the ARCHLINUX entry to Grub and dont know how. I have added the previous entries from the grub that ARCH installed and moved the initrd and vmlinuz files to the /boot directory on ubuntu, but it doesnt work. I did a similar thing with Acronis True Image rescue cds(to avoid having to insert the cd in order to use it) and it worked like a charm, but I am lost in this one.
Here are my partitions, sdb is the one where all my partitions and files are (sdb5 is where ARCH is), the other 2 are backups:
Quote:
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xda85214c
[Code]....
I have a pc where there was redhat installed, and I decided to put ubuntu in dual boot.The installation went ok, but now I can't log in with redhat anymore. RH was installed on a RAID partition, and I installed ubuntu on an additional HD.
Now I have two problems:
a) I cannot boot red hat, since there is no such entry in the grub
b) this machine had several users, that now cannot access it remotely anymore.
Below you can find the output of fdisk -l and the grub.cfg files, the old red hat one, and the new one created by ubuntu. Not that in any case I cannot reinstall redhat, since there are other people using the machine.
[Code]...
I was cleaning old kernels from Grub menu, all sorted except for a vista entry that i could not delete. Ran this line which I found,"sudo chmod -x /etc/grub.d/30_os-prober", to remove unwanted entries, now only the linux entry left in Grub menu, windows 7 entry gone. The vista entry was from an old install which is not there anymore. Running 10.10 at the moment which is dualbooted with win7.
View 7 Replies View Relatedi just know about this : Boot Info Script 0.55 dated February 15th, 2010
[Code]...
I need to remove an entry from my grub boot loader does anyone have a simple way to do this?
View 6 Replies View RelatedTrying to change with the entry of grub:
sudo kate /boot/grub/grub.cfg putting "Windows 7" in place of Windows Recovery Environment (loader) on /dev/sda2.
Just launch the command sudo update-grub charge me more:
-Found linux image: /boot/vmlinuz-2.6.35-22-generic
-Found initrd image: /boot/initrd.img-2.6.35-22-generic
-Found memtest86+ image: /boot/memtest86+.bin -Found Windows Recovery Environment (loader) on /dev/sda2
Windows 7 should be written here. The procedure is another?
Is it possible to remove the entry 'Other operating systems' from the Grub menu display? I mean that it can be commented in menu.lst,but will it affect other OS(Win XP in my case) in any way?
View 2 Replies View RelatedI have added a manual entry to /etc/grub.d/40_custom and ran update-grub and the entry is added to /boot/grub/grub.cfg OK. But when booting the entry is not appearing. I am a bit stumped trouble shooting this as there are no errors.
View 9 Replies View RelatedI installed centos 5 in my PC. When it come to boot loader section I choose another partition (boot) not master boot record. After installing successfully when I restart my PC it is not showing grub it is going stright away to windows. I have also installed window xp. How to add grub entry in mbr.
View 3 Replies View RelatedI followed the instructions from this post to reorder my boot options. But somehow I was stupid enough not to copy the windows entry, as indicated (I was mainly following only terminal instructions and such).Now I have a grub menu without my Windows 7 entry, please tell me there is a way to restore it.
View 9 Replies View RelatedI have Recently downloaded Fedora 15.|64bit| & I Think its a very good distro. However I Realised Once My Pc Restarted My Windows 7 Was Removed from my boot entry. I am Not At All familar with Linux, Ive Read millions of forums trying to fix my problem but all has failed.Could someone show me how to add The OS Back or How To Burn A Bootable OS (Win7) Using This Distro Of Linux.
View 10 Replies View RelatedFor some time I have been using Clonezilla to backup/restore linux installations. I would like - instead to USB-key that is always not to be found, to somehow "move" the clonezilla (on a USB stick). What I have tried to is to make a separate partition to install this on, copied all the files on the USB -key to that partition, and then make a new entry in GRUB via yast. Then I point to the new wmlinus and initramfs. I would have been much surprised if something link this was working after first shot. But it was also not working after the 80. shot.
View 3 Replies View Relatedim still relatively new to linux and fedora, and i was wondering if it would be possible to install another distro on an external hard disk and keep fedora's grub. i tried this once before but the following things happened: (fedora is on my internal hard disk) the installation to the external hard drive went well, and i set the boot partition to C: because thats the first partition however when i unplugged my external hard drive, and proceeded to boot into fedora, nothing happened. my bios screen flashed and then a blank screen with a cursor. is there anyway to keep Fedora's grub where it is and just install another linux distro without that said distro's grub and add that distro to the grub list in fedora manually? or even boot to my external from the bios itself (because mine can do that)
View 11 Replies View RelatedI'm going to try and install fglrx again, however last time it killed my system, giving me a 'display not detected' error on my monitor with no way to reach a non-grapgical tty to edit xorg.conf.Is it possible to create a custom grub entry that will boot Fedora 15 with the Radeon drivers in case fglrx once again trashes my system?
View 2 Replies View Related