Fedora Installation :: FC14 Won't Fully Install / Make It Possible?
Dec 24, 2010
New 320 Gig HD. Installed FC14 from DVD and it worked, except there are no icons at all to get started as there were in FC 13. Cant find "Places", "Applications" that were at the top of the screen. Now it's blank except for the splash design. Tried to re-install, but it won't do that. Just goes to the HD and the same blank splash screen. Thanks for the help. Please be easy with explanations as I'm new at this.
View 14 Replies
ADVERTISEMENT
May 1, 2011
It appears that the update process on or about 2011.04.28 downloaded and installed a non PAE kernel (kernel-2.6.35.12-90.fc14) on my box. Until this update, it has been installing PAE designated kernels. When this update occurred, it downloaded the PAE headers and debug, devel and debug-devel PAE components. Has anyone else noticed this in their update?
View 4 Replies
View Related
May 13, 2011
I'm trying to install FC14 on my box... without any success so far
The problem: when it comes to write the partitioning scheme to the disk, the system freezes. This occurs with the following CD images:
- Fedora 14 LXDE live image. Installation using "Install to Disk" script.
- Fedora 14, regular i386 image
- Fedora 15 (beta) LXDE live image
I did further tests and found out that I could simply reproduce the problem by trying to write a partition on /dev/sdb using fdisk:
- after executing the fdisk 'w' command, the system hangs for about 10-15 seconds
- no kernel message can been seen during this time using dmesg
- after those 10-15s, the system freezes. I have no other option but power off the machine.
There is no Hardware problem with the disk itself. I can read/write partition on that disk without problem using another distro.
Does someone have a few ideas what to do?
View 5 Replies
View Related
Jan 30, 2010
I have ubuntu 8.04 installed on a full disk partition. I've just bought a linux magazine, which came with a CD containing Fedora 12. I want to dual boot or fully install while retaining my music, if at all possible.
I've tried running the Fedora disc and choosing to fill empty space with Fedora, but I get an error informing me that I don't have enough space. Presumably, this is because I have a full disk partition.
View 1 Replies
View Related
Jan 29, 2011
When I load a fresh install of Fedora 14 on my system that the desktop doesn't load completely? It goes as far as giving me the desktop with a background, the icons and status bar do not appear. I am able to right click and open a konsle terminal but only when I am in KDE (failsafe)
What is weird is initially I had no problem. But when I switched to a different monitor the desktop would not load correctly. I have reinstalled the OS since then and still have the same issue.
View 4 Replies
View Related
Jul 30, 2011
I'd like to update my version of gsl to 1.15 (it has improved integration routines) Downloading & compiling worked, but I'm hesitant to overwrite the default packages with ones I compiled myself since there's a lot of compilation flags etc I may be getting wrong. On top of that, I need the header files from gsl-devel too to link against, and I'm not sure how that works. (Where to place them etc)Is there any way to use these packages to install on fc14?Should I just compile it myself?And what about the devel headers?
View 2 Replies
View Related
Jan 29, 2011
I want to install nokia software under linux, but i can't find any software about nokia .. some one can give me some advice about this?
View 5 Replies
View Related
Mar 8, 2011
i am getting problems in order to install my HP laser jet p1006 printer for FC14.
View 15 Replies
View Related
Aug 20, 2010
I found out how to make the panels fully transparent so I thought I would share it with others. When you set the panel to be transparent in the default Ambiance theme in Ubuntu 10.04, you will find that some panel items' backgrounds are not transparent, but you can make them transparent and consistent with others, following these steps:
Go to Applications (or Main Menu) > Accessories > Terminal.
Enter cp -R /usr/share/themes/Ambiance ~/.themes/
Enter gedit ~/.themes/Ambiance/gtk-2.0/gtkrc to open Ambiance's ftkrc file with gedit.
Search for this line bg_pixmap[NORMAL] = "panel_bg.png"
Comment out the line by placing a # at the beginning of the line, like this: # bg_pixmap[NORMAL] = "panel_bg.png"
Save the gtkrc file.
Go to System > Preferences > Appearance, switch to the other theme and then back to the Ambiance theme.
View 9 Replies
View Related
Dec 20, 2010
I decided to upgrade my FC installation to the latest version - FC itself offered the upgrade when I turned the machine on, so it appeared that it was nicely packaged to make the upgrade easy.After a long download of packages, the machine rebooted and then started taking me through configuration options (timezone, disks to use for the installation etc) but then it crashed trying to write to disk and now leaves me at a grub prompt whenever I boot.Is there any way to "get at" the installation files and get back into trying to install or do I now need to download an ISO and burn a DVD and start all over again?
View 1 Replies
View Related
May 14, 2011
I'm trying to get dial up working using wvdial, kppp or system-config-network. Whatever I try, it shows "no modem found." I'm using a US Robotics serial modem that's worked with other linux set-ups, so I know it's not the modem. What's the command to find a serial modem in the terminal? lspci doesn't show it.
And any info on getting any of these to work..especially system-config-network! Had it working with linux Mint's LXDE on an older Thinkpad, but something happened after an up date (kept saying that an IBM system was detected and refusing to load a module when it booted.) After update, didn't show that warning, perhaps loading the module.
Old Thinkpad hasn't loaded an operating system since! Won't even load gparted so I can get something else on it.....so I'm sticking with Fedora until I can figure it out. Got another old Thinkpad, don't want to repeat the same mistake. Guessing that it's a debian problem, as Mint's never broken anything before.
View 14 Replies
View Related
Dec 27, 2010
I am trying to install 2 or 3 versions of linux on my hardisk of 500GB capacity. The configuration of my machine is Intel Dual Core, 4 GB Ram, 3.0 Processor Windows XP is not installed on this. I tried to use a tool called GParted but was unable to use as it was not able to bring up the XServer So I booted the machine with fedora14 installation CD and chose "Custom Layout" After reading about the partitions needed by Fedora I created 3 partitions in /dev/sda /dev/sda1 the boot of 500MB formated as ext4 /dev/sda2 the swap of 6096MB formatted as swap /dev/sda3 / size 150GB formatted as ext4
The installation went well and fc14 runs well on this. However when I went to install the other linux version ....the installer was not able to recognize the unallocated space of nearly 350 GB on the hard disk.....So I am not able to create new partitions and then install the new linux on the newer partition. As a result I am unable to make use of the remaining space on the HDisk. I think I should have created /dev/sda4 /dev/sda5 etc when I installed fc14 itself....
View 4 Replies
View Related
Nov 10, 2010
I installed mysql on FC14, but can't successfully create a new user. It lets me go through all the steps without complaint, but then I can't log into mysql as the new user.
Here's what I did.
1) yum install mysql mysql-server
2) service mysqld start ##sets up mysql
3) mysqladmin -u root password myownsecrectpass ##create a root password
3b) mysql -uroot -p; #log in as root, this works fine
4) CREATE DATABASE webdb;
5) CREATE USER 'anewuser'@'%' IDENTIFIED BY 'password123'; ##create anewuser with a passwd
6) GRANT ALL ON webdb.* TO anewuser@'%';
7) FLUSH PRIVILEGES;
Then I log out of mysql as root and try to log in like this
mysql -uanewuser -p
I enter the password and get this error:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
View 3 Replies
View Related
Dec 20, 2010
I am going to set up a home server (command line only) with 2 x 1 GB HD and 4G memory. hat partitioning scheme would you recommend? Not more than 5 users Fedora Core only Will host a web page Will run DNS, DHCP, SAMBA, LAMP, NTP, Firewall, etc.. Just normal stuff.The server will host a large amount of video/audio/picture files
View 5 Replies
View Related
Apr 25, 2011
I have work through fedora project guides and got these messages beneath.
[code]...
View 4 Replies
View Related
May 9, 2011
I had a FC13 box which I ran a yum update which obviously does updates to the packages installed. My issue is that its tried to upgrade the kernel to FC14 and that has toasted by install. now when the box boots up I get this on the screen.
[ 1.741672] Kernel Panic - not syncin: VFS: unable to mount foot fs on unknown -block(0,0)
[ 1.741715] Pid: 1, comm: swapper Not tainted 2.6.35.12-90.fc.x86_64 #1
[ 1.741754] Call Trace:
[ 1.741789] [<ffffffff81468d6f> panic+0x8b/0x10d
there are a few more lines like te last one. I've tried a rescue disk but no good. is my box toasted for good? I've used a live cd and can still the data on the box, is there any way to resue this situation? or is it run live cd backup the data and do fresh install?
View 4 Replies
View Related
May 27, 2011
After doing an upgrade from FC14 to FC15, I then updated the packages by doing:
yum update yum
yum clean all
yum --releasever=15 --disableplugin=presto distro-sync
I then get the following voluminous list of issues (148 pre-existing rpmdb problems). I've done an rpm --rebuilddb but no help.
Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
libclutter-gtk-0.10.so.0()(64bit) is needed by gthumb-2.12.3-2.fc15.x86_64
Please report this error in [URL]
Found 148 pre-existing rpmdb problem(s), 'yum check' output follows:
ImageMagick-c++-6.6.4.1-15.fc14.x86_64 has missing requires of ImageMagick = ('0', '6.6.4.1', '15.fc14')
akonadi-1.5.3-1.fc14.x86_64 has missing requires of libboost_program_options-mt.so.1.44.0()(64bit)
alchemist-1.0.37-8.fc12.x86_64 has missing requires of python(abi) = ('0', '2.6', None) .....
Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx-2011-05-27-10-30qO4br9.yumtx
Well, it appears that downloading and installing libclutter-gtk-0.10.so.0 seemed to fix all the subsequent yum error messages, and I was able to install all the packages.
View 4 Replies
View Related
Dec 27, 2010
I just installed FC14 on 2 different PCs. It takes over 40 seconds for either of them to open some webpages, ie amazons home page. It is not my internet connection. I can open the same webpage on both my Windows PCs in less than 5 seconds. I was using FC9 up until 1 month ago, and I believe it took about 15 seconds to open amazon, but I never actually timed it. I spend many hours a day on the internet and have used FC for many years. I have been very happy with it. Until now. My PCs are 1.8GHZ single processor and 2.4GHZ dual processor. Do I have to revert back to FC9 to fix this, or use a different distro?
View 4 Replies
View Related
May 27, 2011
i have just upgraded from f14 to f15 using preupgrade. i am now still waiting for the first boot to finish. the screen is stuck for more than an hour and the last line written was:
Started LSB: Start up the OpenSSH server daemon. and there is a blinking cursor.
View 3 Replies
View Related
Jun 4, 2011
Dell Studio 1555 (Wireless WLAN 1397 Half MiniCard (4312bg)) I'd tried
Code:
# akmods --force
5.100.82.38-1-for-2.6.38.6-27.fc15.i686.PAE.failed.log is attached. How to build akmods?
View 3 Replies
View Related
Jun 17, 2011
My system with kernel-2.6.35.10-74.fc14.x86_64, NVIDIA 3800 + Samsung 2233 and 3Dvision kit works fine, but upon upgrading to kernel-2.6.35.13-92.fc14.x86_64 the system won't go past the blue->white bar along the screen. The modprobe.d directory has the file blacklisting nouveau and there is the grub entry rdblacklist=nouveau, but do I need to re-run the nvidia installer. If so I think I need to reset the init level to stop X11 trying to load. and will I need to keep doing this everytime I upgrade the kernel if I have nvidia drivers installed?
Leigh123linux desired code output is below
***
abrt-addon-kerneloops-1.1.18-1.fc14.x86_64
kernel-2.6.35.10-74.fc14.x86_64
kernel-2.6.35.13-91.fc14.x86_64
[Code]....
View 2 Replies
View Related
Aug 8, 2011
I am unable to boot with kernel 2.6.35.13-92.fc14.x86_64 which was installed while applying software updates. It hangs with the last message issued "Registering binary handler for Windows Applications". Searching led to it being related to a problem with the nvidia drivers. I followed the directions in several posts - delete /etc/X11/xorg.conf, reboot, run nvidia-xconfig, reboot and all is fine, but not in my case. The first reboot works but the screen is wrong. There is a 1 inch wide black border around the presentation window. If I then do the nvidia-xconfig and reboot, i am back to where I was before - boot hangs after issuing "Registering...". If I boot to the last good kernel, everything works fine. This happened to me once before and I was able to fix it by rebuilding the nvidia kernel (I think that was what I had to do), but I can't find out how to do that. I have akmod and kmod installed which are supposed to take care of this problem. I booted to kernel 13-92 recovery mode, deleted the xorg.conf file and ran nvidia-xconfig from there. Still fails. I don't know what to list here, but I will do my best to supply whatever is necessary.
View 1 Replies
View Related
Aug 14, 2011
I am about to upgrade my wife's PC from FC12 to FC14. The DVD boots OK and the disk check passes OK. The installer get to the point that it says 'Running Anaconda' (or words to that effect), then the screen is cleared, a brief flash of garbled graphics appears at the top of the screen, then all goes blank.
If I select the option to install using a basic video driver, I get the expected installation screens appearing centred but scaled down within the display, as though the image was a 640x480 window in, say, a 1024x768 display (those figures are guesses, but give the right idea).
I can install this way, but first want to check that this will not leave me with a scaled-down display when I boot to FC14. In other words, will FC14 recognise my (elderly) video card correctly, even though the installer does not?
The machine is running fine under FC12 and I did not strike this problem when I upgraded it to that version.
I have tried the upgrade using two different DVD images, in case one had a fault that the disk check did not pick up.
View 3 Replies
View Related
Nov 18, 2010
How to make the mics work on a Dell XPX M1330 laptop. This seems to be a common problem with built in mics on laptops. I've tried all the obvious things with alsamixer and pulseaudio.
View 1 Replies
View Related
Nov 20, 2010
it's the installation media or the ISO is broken because i have reburned / redownloaded the fedora14 multiple times with the same result. I even tried burning the disc on a different computer just to make sure the burner is still working. This is the error i am getting when the "Starting installation Process" dialog displayed.
"The file upstart-sysvint.0.65.9.fc14.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source" I remember fedora 13 and below i have to use nousb command or something similar to get fedora installed properly but not for fedora 14. It just pops up with the message above.
View 8 Replies
View Related
Jun 3, 2010
I am running fedora 12.
It works very smooth in my system.
My system configuration is given in my signature.
When i am trying to install fedora 13 64 bit after that anaconda screen i am getting a screen of blue background and the rectangular small installation screen .but the problem is that nothing is there in that screen.It is completely white and the system stands there for ever.
How can I install fedora 13?
View 4 Replies
View Related
Aug 17, 2011
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
View 4 Replies
View Related
Mar 11, 2010
I'm trying to install from the Live CD. I read the sticky about needing a /boot and a / partition. I think that sticky applies to me but I'm not sure; once the Live CD loads, I click the "Install to Hard Drive" icon on the desktop. It thinks for awhile but ultimately doesn't display anything.What I'm not sure about is how exactly I go about making those partitions. My current HD is a Ubuntu system (Karmic Koala), and its network slowness has prompted me to try FC12. I've backed up everything already, I don't need to preserve anything on the existing drive.
I'm looking for the easiest way to get FC12 installed. Should I fool with the partitions? I just download a different install CD i.e. a non-Live one? If so, which one? Do I need all 5 or so CD images? I don't have a DVD burner so downloading the DVD isn't an option. I'm comfortable working from a Linux command line once the system is working, but I don't have much experience "close to the metal" i.e. actually getting a system up and running.
View 1 Replies
View Related
Feb 16, 2011
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies
View Related
Mar 14, 2009
I have successfully installed fedora 10 and have rpmfusion in my /home/ directory. i don't know how to edit yum.conf to make yum install from this local repo. i tried once. But when i tried to install vlc i got an error saying some lib****** files are missing and missing dependencies.
View 2 Replies
View Related
