Fedora Installation :: 13 - Raid0 - Graphic Card Or Something Else
Oct 11, 2010
I've already got two installs without much problems.. one on my laptop and another fedora13 install on an older comp just to test it a bit before installing it on my main comp. But now I've got a problem. Both those install went without problems but when I started installation on my main comp first I've noticed some graphic problems when there is installation started and there is mouse and fedora 13 welcome installation screen. there are some like glitches or something no idea how to describe them.. like bad pixels in small upper part of the screen. But ignoring that everything went OK up to the part where I can choose a standard discs or non starts like sans and stuff..
When I choose standard disc installation just freeze there. No idea what is happening. Only this that came across my mind is that there is a problem with raid maybe? There are 2x640Gb HDD in raid0, there is win7 installed, and another 1Tb HDD, non-raid member disk, where I would like to install Fedora and have a dual boot. Still got programs that I need win for I'm afraid. Installation went smooth on laptop and another comp but there is no raid so I'm guessing that could be a problem. This comp where installation froze is in short:
[Code]....
View 2 Replies
ADVERTISEMENT
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Mar 30, 2010
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies
View Related
Nov 8, 2010
i justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
View 9 Replies
View Related
Feb 14, 2011
I installed ubuntu but when I first tried to login with my correct passwords it goes in a loop and prompt me to log in again. I went to recovery mode and selected safe mode then I was able to log in without any further prompts. As a result of what happened, I unlocked the login screen and changed the setup to allow me to log in automatically and in safe mode only. I am now stuck to login in safe mode only. I tried to unlock the login screen to change to default but no chance. If there is no graphic card in the PC would that have an effect on memory or login?
View 4 Replies
View Related
Jul 20, 2009
How do you enable the graphic card? i have an ATI one and using fedora
View 2 Replies
View Related
Aug 1, 2010
I am trying to install lucid lynx on this laptop [URL] and I am getting the blank screen problem at installation. I tried nomodeset, vga=771, xforcevesa and a couple more and nothing seems to work. I have a livecd I burned a couple months ago. If I delete the quiet splash line at the livecd I get some repeating text too fast to see and after a couple of mins the laptop shuts off by itself. what can I do to get lucid lynx working on this pc?
View 2 Replies
View Related
Sep 2, 2011
I've tried for months, to install a version Fedora where there could not exist any glitch with the graphic card, but without a solution. I recently have taken the path of linux systems, so I'm kinda new with this problem and don't know what to do ! The glitch make some horizontal lines dancing in screen, or can't even read anything. Here you have the spec : [URL]
View 1 Replies
View Related
Sep 5, 2011
However I have problem to install my graphics card Asus ATI Radeon HD 6750 Formula....
View 4 Replies
View Related
Jan 12, 2010
How can I find the right driver for my graphic card? I have nvidia FX 5500.
View 1 Replies
View Related
Jan 7, 2011
I am new to Suse Linux. So please excuse me for this "funny" query. have read the threads: Configuring graphics cards in openSUSE 11.3
From here I went to this page: SDB:Configuring graphics cards - openSUSE Its mentioned on this page that: Upon installing openSUSE, the X system's automatic configuration may have failed to properly configure the graphics correctly. Typically this results in either a black screen upon reboot, or the wrong resolution being displayed on the monitor.
I have none of these problems. But after searching for inability of desktop effects to become activated, I found that nVIDIA graphic card drivers are must for these effects. After clicking "My computer" icon on desktop, I found Display Info as following:
Vendor: nVidia Corporation
Model: G98 [GeForce 8400 GS]
2D driver: nouveau
3D driver: nouveau Gallium (7.8.2)
Can anyone tell me 'Is nouveau an alternative for nVIDIA'? Is this the reason for no wrong resolution or black screen upon boot. That means my computer graphics are working correctly. Then why does Desktop Effects are not getting enabled.
After searching for Kaffeine media player extra codecs to play media files, I incidentally found the following options: I opened Yast Control Center @ linux-o26a Software> Add on Products > installed Add-On Products > Community Repositories > clicking Next, this opened a window with "List of Online repositories" where there is an option of "NVIDIA Repository". If I install it, will it enable the "Desktop effects"
View 9 Replies
View Related
Oct 15, 2010
I don't understand how i should install the driver for my code...
View 2 Replies
View Related
Dec 6, 2010
I bought ASUS K50c with SIS graphic card and have win7 on it (i install it alone).I want to install ubuntu!I found installation of ubuntu 10.10 and tried to install it. There is a huge problem with my graphic card because resolution is 800*600! I found installation of ubuntu 10.04 LTS and tried to install it. Again problem. I tried to download drivers from www.sis.com but there are tar.file and i don't now what is that or how to install it.In windows I now how to install anything, but there is a problem.I am ready to install any version of ubuntu just to solve this problem.
View 2 Replies
View Related
Feb 10, 2010
I just installed fedora12 on my machine,But it didn't recognize to my graphic card! my ATI card type is radeon 9550.
View 6 Replies
View Related
Jun 15, 2011
My notebook can't install Fedora15 because of the graphic card, it said the card's problem or the driver's, i can't tell.
View 5 Replies
View Related
Aug 31, 2009
Because of all the trouble with the asrock 939SLi-eSATA2 (see my previous unsolved thread) I have bought a new MSI 790FX-GD70 mobo + processor +ram3 memory and shifted my MSI K9N2-platinum to the asrock box and mothballed the asrock mobo. A rigorous way to solve the problem, but it turned out to be the beginning of more severe trouble. When I try to install Fedora on the striped disks at first everything looks good. Both gparted and the installer see the linux device mapper partitions on the raid config + the unused space.But if I tell the installer to use the unused space, a mere 150 gig, then it tells me:
Could not allocate requested partitions: not enough free space on the disks. The same happens if I try the custom layout. When I start with a small 200 mB ext3 boot partition the same message appears.The ubuntu live cd with dmraid installed and the ubuntu alternate cd do not even see the devmapper partitions. Is the AMD-ATI chip on this new mobo not properly supported by Fedora/Ubuntu?
View 2 Replies
View Related
Dec 14, 2010
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
View 1 Replies
View Related
Jan 6, 2010
i'm going to change my old Nvidia Graphic card wich runs very well in Ubuntu by an ATI HD Radeon 4770.Will Ubuntu recognize it when i plug it and start the computer, will Ubuntu reconfigure by itself?... or i'm going to have problems like not to be able to start the X server and only be able to enter to the console.Need i to remove the nvidia graphics driver before to plug in the new card?I have downloaded a program called Envy, which is supposed to reconfigure ubuntu properly... it's ok?Finllay, can i backup the curent configuration so that if the new card is not well installed i can return to the old without problems?
View 1 Replies
View Related
Jun 11, 2011
I am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies
View Related
Jan 16, 2011
I've got a problem to use intel graphic card and kde. When I enable opengl support it seems threa re refresh problems, botton now are visible, now not, it seems a blinking effect and when I move the pointer it seems kde try to re-draw the object but the object get invisible, so a relay mess. Xrender instead work but it's slow. Whit opensuse 11.2 all was ok. glxgears however shows me pretty good performance so I don't understand where is the problem.
View 7 Replies
View Related
Sep 27, 2010
I wonder if there is any chance to one day be able to code a graphic card (i.e NVedia and CUDA) with GNU software (i.e gfortran) like PGI dos with its fortran compiler.
View 4 Replies
View Related
Feb 15, 2011
I'm a new user of slackware
is there is anyone know how to install driver of my graphic card..
I'm using slackware 13 and acer aspire 4741..
View 4 Replies
View Related
Jul 31, 2009
so i have motherboard with a integrate graphic card and, i want to to install a new graphic card ( geforce 6200A)when i boot my PC on new graphic card , i have a panic kernel and when i remove the new graphic card and boot with the old card => it works can i configure centos for the new graphic ? and where , what's folder ?
configution : centos 5.3
View 4 Replies
View Related
Oct 21, 2009
I tried to install Fedora 11 on computer with Windows XP as the primary partition, and Fedora 11 as a logical partition. The version of anaconda that ships with Fedora 11 has a bug in the graphical installer, the GUI. The text version of the installer starts up but does not let the user use logical partitions.I have installed Fedora 6 using the graphical installer, and logical partitions.Is there a new version of anaconda for Fedora 11? or Could I use the Fedora 6 anaconda to install Fedora 11?
View 2 Replies
View Related
May 3, 2011
I had the following problem while i installed fedora on my machine: The boot record was normally read from the installation CD and the boot screen appear, (up to this moment my Graphic Adapter is going fine) then i select the first option (which is the default as well) to boot fedora from the CD, and suddenly my monitor inform me that there is no input signal. I think it might be some driver problem, but my adapter is pretty common i think (NVIDIA GeForce 9600 GT), so its not very likely.
Things i have to note:
1. My Adapter is working on my Windows installation.
2. I manage to install fedora by removing my GeForce 9600 GT and using the on board Graphical Card from my main board.
View 5 Replies
View Related
Jul 18, 2010
I just installed Debian 5 in my pc. I have made all the updates but my screen is a bit bright and the resolution isn't very good. I think that i need to install the graphic card driver but all the solution i find in google didn't work . My laptop is Toshiba satellite pro u400 and my card is Intel GMA 4500 MHD.
View 4 Replies
View Related
Apr 30, 2015
I inserted another graphics card to my computer to use 3 monitors. The card appears in lspci but I can't access it in gnome.
What do I have to do to set this up.
Here is the output of my xorg.log: [URL].....
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 XT/X1650 GTO]
View 7 Replies
View Related
Mar 16, 2015
I just installed a fresh Debian testing on my laptop with a VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09). Although X is running seems like it's rather slow. As there’s no xorg.conf
How the graphic card could be configured using the appropriate driver.
View 13 Replies
View Related
Jul 27, 2010
I try to boot up Ubuntu.It seems like everything goes on as normal (I can tell from sounds), but the screen becomes just a jumble of randomly colored lines (see photos; I couldn't get screenshots for obvious reasons).I also included some info about my computer (see pic), but I don't know anything about my graphics card, how do I find that?
P.S. I just installed a fresh version of 10.04 Lucid (dual-boot with WinXP), and as far as I remember, I haven't changed any settings or even installed any software yet!
View 2 Replies
View Related
May 18, 2011
im running ubuntu 11.4 im trying to install amd catalyst 11.4 for my x1300 ati graphic card but when i installed it my system couldn't start and i had to start in recovery mode for removing tha package. i think i have done something wrong with the packages how to install ati catalyst 11.4 on my x1300 graphic card
View 1 Replies
View Related
