OpenSUSE Hardware :: Alternative For NVIDIA Graphic Card Installation Correct?
Jan 7, 2011
I am new to Suse Linux. So please excuse me for this "funny" query. have read the threads: Configuring graphics cards in openSUSE 11.3
From here I went to this page: SDB:Configuring graphics cards - openSUSE Its mentioned on this page that: Upon installing openSUSE, the X system's automatic configuration may have failed to properly configure the graphics correctly. Typically this results in either a black screen upon reboot, or the wrong resolution being displayed on the monitor.
I have none of these problems. But after searching for inability of desktop effects to become activated, I found that nVIDIA graphic card drivers are must for these effects. After clicking "My computer" icon on desktop, I found Display Info as following:
Vendor: nVidia Corporation
Model: G98 [GeForce 8400 GS]
2D driver: nouveau
3D driver: nouveau Gallium (7.8.2)
Can anyone tell me 'Is nouveau an alternative for nVIDIA'? Is this the reason for no wrong resolution or black screen upon boot. That means my computer graphics are working correctly. Then why does Desktop Effects are not getting enabled.
After searching for Kaffeine media player extra codecs to play media files, I incidentally found the following options: I opened Yast Control Center @ linux-o26a Software> Add on Products > installed Add-On Products > Community Repositories > clicking Next, this opened a window with "List of Online repositories" where there is an option of "NVIDIA Repository". If I install it, will it enable the "Desktop effects"
View 9 Replies
ADVERTISEMENT
Feb 1, 2010
I tried to install the NVIDIA graphic card drivers on my laptop XPS 1340, running with opensuse 11.2. There are two graphic cards, the integrated one and the NVIDIA one. I installed the drivers correctly by doing
wget ftp://download.nvidia.com/XFree86/Li...90.36-pkg2.run
su -c 'sh NVIDIA-Linux-x86_64-190.36-pkg2.run -q'
but when trying to configure the x-server
su -c 'sax2 -r -m0=nvidia'
I got the following error message in the /var/log/SaX.log NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
View 4 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Mar 30, 2010
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies
View Related
Nov 8, 2010
i justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
View 9 Replies
View Related
Jan 6, 2010
i'm going to change my old Nvidia Graphic card wich runs very well in Ubuntu by an ATI HD Radeon 4770.Will Ubuntu recognize it when i plug it and start the computer, will Ubuntu reconfigure by itself?... or i'm going to have problems like not to be able to start the X server and only be able to enter to the console.Need i to remove the nvidia graphics driver before to plug in the new card?I have downloaded a program called Envy, which is supposed to reconfigure ubuntu properly... it's ok?Finllay, can i backup the curent configuration so that if the new card is not well installed i can return to the old without problems?
View 1 Replies
View Related
Jul 20, 2010
Using a nvidia graphic card with multi monitor with two monitors. Can I have one with xbmc and other with normal KDE (firefox, xchat, ...).
Can I do this in linux (Slackware)?
View 3 Replies
View Related
Aug 16, 2009
i have a problem with my graphic card when i put in my PC and start on my PC, i have panic kernel i give you the message
View 2 Replies
View Related
Apr 2, 2011
I'm still using Firefox 4 beta11, how to upgrade to ff 4 final? I'm using openSUSE 11.3 (tried to install 11.4 but live-cd won't run on my nvidia graphic)
View 2 Replies
View Related
Mar 17, 2011
I am finding a lot of issues with flash in 11.4 release. As I know it is flash issue, because some people after updating flash on 11.3 got the same problem.
Flash seams to be crashing or/and slowing down web browser. After trying to figure out where is the problem, i found that:
1) removing SLI helped a little bit
2) updating to beta (270) nvidia drivers helped a little bit (moving window with flash animation from one screen to another one that is connected to different graphic card does not crash the browser anymore)
But still the problem exists.
For example, sometimes when i minimize the window with flash animation and i open new window (e.g. with spreadsheet) and move it on the same place where was previous window with flash, I can see this flash animation as a background of the new window....
Also, when i am moving the window with flash around, the flash disappears or gets gray.
Sometimes, ..... does not load the movie, but if i open the movie in VM windows, it works fine. After reloading Xwindows it works for a while also in opensuse.
View 4 Replies
View Related
Jan 16, 2011
I've got a problem to use intel graphic card and kde. When I enable opengl support it seems threa re refresh problems, botton now are visible, now not, it seems a blinking effect and when I move the pointer it seems kde try to re-draw the object but the object get invisible, so a relay mess. Xrender instead work but it's slow. Whit opensuse 11.2 all was ok. glxgears however shows me pretty good performance so I don't understand where is the problem.
View 7 Replies
View Related
Sep 3, 2010
I have installed latest Nvidia driver from the official website i had no problem installing it ( i stopped gdm installed the driver and then restarted gdm ) but the problem is that each time i reboot my ubuntu 10.04 i lose the graphic configurations and i have just to reinstall the Nvidia Driver to make 3d acceleration enabled how can i solve this by installing the driver once and for all
View 1 Replies
View Related
Feb 14, 2011
I installed ubuntu but when I first tried to login with my correct passwords it goes in a loop and prompt me to log in again. I went to recovery mode and selected safe mode then I was able to log in without any further prompts. As a result of what happened, I unlocked the login screen and changed the setup to allow me to log in automatically and in safe mode only. I am now stuck to login in safe mode only. I tried to unlock the login screen to change to default but no chance. If there is no graphic card in the PC would that have an effect on memory or login?
View 4 Replies
View Related
Feb 23, 2011
I belive there is a problem with my graphics card, because when I start a VMware vm with accellerated graphics, i get this message: Code: Cannot open file "/home/joe/.vmware/dndlogs/ * dndlog.conf": No such file or directory. 3D graphics acceleration will be disabled. This computer does not have a 3D graphics system supported by VMware Workstation. My laptop model is the ASUS U52F-BBL9 btw.
View 1 Replies
View Related
Jan 8, 2011
I recently changed my Graphic card drivers from Nouveau to nVIDIA in Suse 11.3 KDE.
One thing I have noticed that initially I had been using various Adobe Fonts in many applications prior to change of drivers. But after this change the looks of the same fonts became quite different, the length & breadth of "individual letters" changed quite a lot making them look not so beautiful as they were earlier. Am I missing something or is it a normal phenomenon. But I am satisfied with the present looks.
View 3 Replies
View Related
Oct 11, 2010
I've already got two installs without much problems.. one on my laptop and another fedora13 install on an older comp just to test it a bit before installing it on my main comp. But now I've got a problem. Both those install went without problems but when I started installation on my main comp first I've noticed some graphic problems when there is installation started and there is mouse and fedora 13 welcome installation screen. there are some like glitches or something no idea how to describe them.. like bad pixels in small upper part of the screen. But ignoring that everything went OK up to the part where I can choose a standard discs or non starts like sans and stuff..
When I choose standard disc installation just freeze there. No idea what is happening. Only this that came across my mind is that there is a problem with raid maybe? There are 2x640Gb HDD in raid0, there is win7 installed, and another 1Tb HDD, non-raid member disk, where I would like to install Fedora and have a dual boot. Still got programs that I need win for I'm afraid. Installation went smooth on laptop and another comp but there is no raid so I'm guessing that could be a problem. This comp where installation froze is in short:
[Code]....
View 2 Replies
View Related
Jan 22, 2011
I have now a Nvidia card but how to make 3d work in Factory. Now I wonder if the Intel or Ati cards can do a better job and are easily to configure.
View 4 Replies
View Related
May 17, 2010
I installed openSuse 11.2 64bit (DVD version). Later I installed the graphic card driver. Then I noticed that it's not working well due to an improper installation (didn't use the manual that you provided here). So I uninstalled the driver. Then, after reboot, instead of a regular desktop, I get a CLI and I'm requested to enter my login information. But in the boot menu, if I enter to the failsafe option, then everything works fine. How can I change the CLI to the regular desktop?
View 9 Replies
View Related
Mar 24, 2011
I think i found out what was crashing my computer my Graphic card every time i start a game the computer goes down. I have a Ati Radeon 5570. Desktop Effects: Disabled System Info: 2d: fglrx 3d: ati I downloaded the Ati Drivers from the website after installing the Open Source not sure if that is causing a problem. Here are the steps i took. su - UNSUPPORTED="yes" sh ./ati-driver-installer-11-2-x86.x86_64.run --buildpkg SuSE/SUSE-autodetection zypper in fglrx* aticonfig --initial reboot It will crash whenever i start a game and randomly when i run ..... VLC etc.. Edit: Should i uninstall all opensource/ati and start over and if thats the case whats the best approach to this?
View 5 Replies
View Related
Aug 1, 2010
I am trying to install lucid lynx on this laptop [URL] and I am getting the blank screen problem at installation. I tried nomodeset, vga=771, xforcevesa and a couple more and nothing seems to work. I have a livecd I burned a couple months ago. If I delete the quiet splash line at the livecd I get some repeating text too fast to see and after a couple of mins the laptop shuts off by itself. what can I do to get lucid lynx working on this pc?
View 2 Replies
View Related
Apr 18, 2010
I have got notebook HP 4710s and I can't get drivers for graphic card ATI Mobility Radeon HD 4330. ATI repository for openSUSE and SLED doesn't working. Do you know when Can I get it?
View 2 Replies
View Related
May 31, 2010
I am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.
I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.
View 9 Replies
View Related
Aug 8, 2010
The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.
System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,
View 6 Replies
View Related
Sep 5, 2011
However I have problem to install my graphics card Asus ATI Radeon HD 6750 Formula....
View 4 Replies
View Related
Jul 5, 2011
How to configure X Window on opensuse 11.4 and older x86 hardware with 32MB graphic card?
View 9 Replies
View Related
Nov 8, 2010
Had a well working sound system until I bought a USB webcam with microphone. Sound still works well except with flash. As mentioned here my problem is making flash use my normal sound card instead of the USB webcam microphone.
View 2 Replies
View Related
Oct 15, 2010
I don't understand how i should install the driver for my code...
View 2 Replies
View Related
Dec 6, 2010
I bought ASUS K50c with SIS graphic card and have win7 on it (i install it alone).I want to install ubuntu!I found installation of ubuntu 10.10 and tried to install it. There is a huge problem with my graphic card because resolution is 800*600! I found installation of ubuntu 10.04 LTS and tried to install it. Again problem. I tried to download drivers from www.sis.com but there are tar.file and i don't now what is that or how to install it.In windows I now how to install anything, but there is a problem.I am ready to install any version of ubuntu just to solve this problem.
View 2 Replies
View Related
Dec 6, 2010
Well, i guess it is the graphic card:
I tried to watch a flash video on full screen; then the screen went black with some glitches and then my laptop suddenly shut down. I couldn't start opensuse back again, the screen goes black and freezes. I tried restarting in windows, and it freezes too. However, opensuse in failsafe mode works.
After that, i tried reinstalling opensuse. This time, i can start normally, but after a while, the screen shows some glitch (the updater applet looked wrong) and freezes. Windows isn't loading either, but opensuse failsafe mode is still working ok.
I guess it is a hardware problem (since windows also crashes). However, i would like some help to run "diagnostics" to my system.
My graphic card is a nvidia 8400 gs, and i am running opensuse 11.3
I was using the nvidia driver i found in opensuse-community (installed quite a long time ago); however, after i reinstalled, i was using the default driver. It is possible that my kernel was updated a couple of days ago (but i am not really sure of that)
View 9 Replies
View Related
Apr 3, 2011
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
3.) Stuck don't know what to do.
View 4 Replies
View Related