I just installed Debian 5 in my pc. I have made all the updates but my screen is a bit bright and the resolution isn't very good. I think that i need to install the graphic card driver but all the solution i find in google didn't work . My laptop is Toshiba satellite pro u400 and my card is Intel GMA 4500 MHD.
View 4 RepliesSo I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies View Relatedi justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
I just installed a fresh Debian testing on my laptop with a VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09). Although X is running seems like it's rather slow. As there’s no xorg.conf
How the graphic card could be configured using the appropriate driver.
I'm a new user of slackware
is there is anyone know how to install driver of my graphic card..
I'm using slackware 13 and acer aspire 4741..
Today I fresh installed the latest stable version of debian (jessie) with gnome from the USB DVD image for a 64bit machine. Everything got fine except the graphic driver, I think.
Now Gnome 3 is running but graphic is super slow. My previous debian/gnome 3 ran much better and I think there is a problem with the graphic driver.
I'm on an thinkpad t61.
Processor: Intel Core2 Duo CPU T7500 @ 2.20GHz × 2
Ram: 4GB
Graphic: VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c)
Now the graphic is: Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits) which is likely wrong. If I'm not mistaken llvmpipe is pure slow software acceleration.
Moreover this was different on my previous debian (wheezy), which was faster. Anyway I don't know what " Gallium 0.4 on llvmpipe (LLVM 3.5, 128 bits) " is and it was for sure different in wheezy.
According to apt-get I have the latest intel graphic divers installed. So maybe this an X-org confic problem?
I'm trying to install the driver for mi wireless card. The instructions say that to build the tar.gz file, I have to:
# mkdir hybrid_wl
# cd hybrid_wl
# tar <path>/hybrid-portsrc.tarhybrid-portsrc-x86_64.tar.gz
The third step i don't understand. I want the folder of the driver to be located in a folder inside home called "Programas" so what I did was to open the terminal, went su, and then did cd Programas. Then I followed instructions 1 and 2, but I don't know what to put where it says <path>.
I installed openSuse 11.2 64bit (DVD version). Later I installed the graphic card driver. Then I noticed that it's not working well due to an improper installation (didn't use the manual that you provided here). So I uninstalled the driver. Then, after reboot, instead of a regular desktop, I get a CLI and I'm requested to enter my login information. But in the boot menu, if I enter to the failsafe option, then everything works fine. How can I change the CLI to the regular desktop?
View 9 Replies View RelatedI don't understand how i should install the driver for my code...
View 2 Replies View RelatedI have recently installed Centos. During the installation, I noticed that only sound was being tested during the installation. Once everything has been installed successfully. I can run Centos with no problem. However, when I tried to switch from one window (browser) to another. The display was slow. Thus, I suspected the driver for the graphic card of my PC is not being installed successfully. When I type /sbin/lspci | grep VGA in the terminal, I get the following output:
02:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
03:00.0 VGA compatible controller: nVidia Corporation Unknown device 06fd (rev a1)
Then, I went to the dell support & driver site to download the driver. In the readme file, it is suggested to install dkms first before installing the graphics driver by typing rpm -ivh dkms-2.1.0.1-1.noarch.rpm
I managed to install the dkms without any error.However, when I use rpm to install the graphics driver as suggested by the readme file:
rpm -ivh dell-nvidia-190.42-1dkms_rhel5.3.x86_64.rpm
I get the following errors: error: Failed dependencies:
libX11.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64
libXext.so.6()(64bit) is needed by dell-nvidia-190.42-1dkms_rhel5.3.x86_64[code]....
Since the above errors may be related to the missing packages then I use yum provides and install to find the missing packages. Even I try to install all the matched packages, i still cant install the driver for my graphic card. To be honest, i am not very sure whether I am doing the right things or not. how to solve this slow display problem when switching from one application to another.
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies View RelatedThe system has driver for intel, but the opengl version is 2.1. How to update opengl version to 4.1. (intel 945). For ATI just download driver version 11.5 and install it. All is OK.
View 1 Replies View RelatedHow can I find the right driver for my graphic card? I have nvidia FX 5500.
View 1 Replies View RelatedI tried to install the NVIDIA graphic card drivers on my laptop XPS 1340, running with opensuse 11.2. There are two graphic cards, the integrated one and the NVIDIA one. I installed the drivers correctly by doing
wget ftp://download.nvidia.com/XFree86/Li...90.36-pkg2.run
su -c 'sh NVIDIA-Linux-x86_64-190.36-pkg2.run -q'
but when trying to configure the x-server
su -c 'sax2 -r -m0=nvidia'
I got the following error message in the /var/log/SaX.log NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
I inserted another graphics card to my computer to use 3 monitors. The card appears in lspci but I can't access it in gnome.
What do I have to do to set this up.
Here is the output of my xorg.log: [URL].....
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 XT/X1650 GTO]
I found my fedora 9 GNOME gui is very very slow. Browser, editor everything ... when I type in the editor, the display is even slower than I type! I suspect maybe the graphic driver is not installed properly. Could someone point me where to star How do I check the graphic driver? If it needs update how do I do it?
View 1 Replies View RelatedI have ubuntu 9.04 64bits and I can't find the right graphic driver for the Sis 330 Mirage on the motherboard D2030-A2.
View 2 Replies View Relatedso i have motherboard with a integrate graphic card and, i want to to install a new graphic card ( geforce 6200A)when i boot my PC on new graphic card , i have a panic kernel and when i remove the new graphic card and boot with the old card => it works can i configure centos for the new graphic ? and where , what's folder ?
configution : centos 5.3
I've got a Dell Optiplex Desktop here, the CPU is a Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz. The integrated ethernet here is from intel also, it's a 82579LM Gigabit Network Connection. This computer is running a Debian Squeeze 64bits, distrib sid, kernel 2.6.39-2-amd64.Well, here goes the story. I had a lot of trouble with the ethernet card, being very slow, and it just didn't work when i was using tftp. So I downloaded and compiled the latest driver available on Intel website. Currently with debian sid, the version for the driver ( e1000e ) is version: 1.3.10-k2. From Intel I got the version 1.3.17-NAPI.Alright, so I build it, and move the module manually to the right place, replacing the previous version at the same time ie :
$ sudo cp e1000e.ko /lib/modules/2.6.39-2-amd64/kernel/drivers/net/e1000e/e1000e.ko
However, there is is still something bothering me. When I want to check, after rebooting, that I did it right, here is what happens :
$ sudo ethtool -i eth1
driver: e1000e
version: 1.3.10-k2
[code]...
So, which one should I trust ? Is there something I didn't do properly when installing the module ? Or maybe I just don't understand ethtool and modinfo enough.
However I have problem to install my graphics card Asus ATI Radeon HD 6750 Formula....
View 4 Replies View RelatedI have one Asus motherboard with inbuilt HD 3300 Radeon family graphics system, I have used it with radeon and radeonhd drivers and I have xorg.conf. I tried to change card to Radeon HD 4350 but it didn't give more than terminal view, Xdm didn't start. I believed the driver would support both cards?
View 1 Replies View RelatedI'm trying to make things work on my laptop. Almost done, but there is one hardware issue left. I have a Intel HD4400 graphic card. But it seems that it is not recognized. I had an issue loading Gnome3.
Code: Select allGNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.
This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience
Another thing :
Code: Select all$ grep EE /var/log/Xorg.0.log
[ 29.117] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
Also, if I go in "applications" ->"system tools" -> "Preferences" -> "System settings" and then in "Details, under Graphics I have "Drivers : unknown", "Experience : Fallback".
And as a consequence, I can't use dual-screen. If I plug another sreen, I have an exact copy, not even with a good resolution.
I search on the web for solutions, but I didn't understand much. I don't know what Xorg is, x-window, etc...
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
I think to change my video card. But i was asking myself, it is not good idea first to install the driver and then change the video card?
What is your opinion?
I've been trying to install the latest NVIDIA driver for my 7800GS card. dl the driver from NVIDIA. ctrl+alt+F1. stop gdm3, after I hit agree I get an error. The CC version check failed: The compiler used to compile the kernel (gcc4.3) dows not match the current compiler (gcc4.4). The Linux 2.6 kernel module loader rejects kernel module built with a..
View 3 Replies View RelatedI am trying to install NVIDIA graphics drivers. I can execute the .run but it comes up with an error the X Server is in use and needs to be closed.
I have tried to run
Ctrl Alt Backspace
and
sudo /etc/init.d/gdm stop
But the terminal requests the root password and I can not enter anything for the password in the line. If I go to the next line and enter anything the password fails.
Intel Core i7-5500U with Intel HD Graphics.So I updated to the backports kernel and backports intel xorg drivers and I have the weirdest thing.Everything is stuttery even cinnamon desktop effects are no longer smooth. If I boot back to 3.16, everything is butter (except the screen corruption). Even my favorite wine game dropped 25% in fps.
I remember that on windows, if the cpu is too slow (pstate_min_speed), graphics is also stuttery. However, increasing /sys/devices/system/cpu /intel_ pstate/min_perf_pct even to 100% didn't do the trick. I suspect, that this measure is causing it: URL....
how to increase the performance again? I just found out, after running glxgears (with about 40 fps), that xrandr shows an available framerate of 40fps
xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 293mm x 165mm
1920x1080 60.00*+ 59.93 40.00
I guess that's what makes it feel slow. Do you know how to get that back up to 60 (fixed)? It seems like the screen refresh rate set in xrandr has no effect on the problem. When I boot, glxgears runs with 60 fps and everything is fine. After a while, it drops to 40 and the whole desktop keeps stuttering. if I change the resolution with xrandr and then change it back, it goes to 60 again for a while
LVDS_DOWNCLOCK is disabled
Code: Select allsystool -m i915 -av
Module = "i915"
Attributes:
coresize = "1028096"
initsize = "0"
initstate = "live"
refcnt = "5"
taint = ""
uevent = <store method only>
[code]...
im running ubuntu 11.4 im trying to install amd catalyst 11.4 for my x1300 ati graphic card but when i installed it my system couldn't start and i had to start in recovery mode for removing tha package. i think i have done something wrong with the packages how to install ati catalyst 11.4 on my x1300 graphic card
View 1 Replies View RelatedI'm attempting to get a Realtek 0bda:8176 wireless usb adapter (lsusb gives: Bus 001 Device 006: ID 0bda:8176 Realtek Semiconductor Corp.) running with my Debian Server, I researched and found that the RTL8192CE driver is required for my adapter but when I run make install I get this error:
[Code]....