OpenSUSE :: Kde 4.4.4 And Intel 865g Graphic Card?
Jan 16, 2011
I've got a problem to use intel graphic card and kde. When I enable opengl support it seems threa re refresh problems, botton now are visible, now not, it seems a blinking effect and when I move the pointer it seems kde try to re-draw the object but the object get invisible, so a relay mess. Xrender instead work but it's slow. Whit opensuse 11.2 all was ok. glxgears however shows me pretty good performance so I don't understand where is the problem.
View 7 Replies
ADVERTISEMENT
Mar 17, 2010
I have a Dell Dimension 3000 with an integrated Intel 865g graphics card that I am trying to use in X on Centos 5.4 i386. The "810" driver (what Centos configures by default) works, but will not display at 1600x900. Strangely enough, it will actually work at higher resolutions such as 1600x1200, but 1600x900 fails, even with 915resolution and 855resolution. The "intel" xorg driver (included with Centos) locks up the entire machine when starting X, so thats a no go as well.
The "fbdev" driver works but, once again, won't display 1600x900, because that resolution doesn't work properly with the version of the intelfb kernel module that Centos bundles. Fedora Core 12 works perfectly fine at 1600x900 on the machine. I think that if I could get a newer xorg installation (or perhaps just a driver) going under Centos, it might fix the problem. I couldn't find any 3rd party repos containing such packages. I'd really rather run Centos on the machine, due to the package stability (yes, I see the irony here).
View 1 Replies
View Related
Sep 15, 2014
I'm trying to make things work on my laptop. Almost done, but there is one hardware issue left. I have a Intel HD4400 graphic card. But it seems that it is not recognized. I had an issue loading Gnome3.
Code: Select allGNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.
This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience
Another thing :
Code: Select all$ grep EE /var/log/Xorg.0.log
[ 29.117] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
Also, if I go in "applications" ->"system tools" -> "Preferences" -> "System settings" and then in "Details, under Graphics I have "Drivers : unknown", "Experience : Fallback".
And as a consequence, I can't use dual-screen. If I plug another sreen, I have an exact copy, not even with a good resolution.
I search on the web for solutions, but I didn't understand much. I don't know what Xorg is, x-window, etc...
View 3 Replies
View Related
Jun 22, 2011
The system has driver for intel, but the opengl version is 2.1. How to update opengl version to 4.1. (intel 945). For ATI just download driver version 11.5 and install it. All is OK.
View 1 Replies
View Related
Feb 28, 2011
I had an old thinkpad x61s laptop running ubuntu 10.10 with an intel gm965 graphics card. When i checked the monitor today it says the refreshing rate is 50hz and there is no other option available. I vaguely remember it used to be working at 60hz when I was running xp, so I googled and searched the forum for answers but came with no luck. Some people reported a similar problem with their nvidia graphic card and they seems to be able to modify a xorg.conf file to manually solve the issue (sadly I don't know how).
View 4 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
May 26, 2009
...xorg-x11-driver-video from 7.4-19.5.1 (i586) back to 7.4-19.4 (i586). Before that (and seems after a fatal upgrade of my graphic driver) I could only start the graphic surface (sax2?/xorg?) in the save modus of suse 11.1. helps others (with intel onboard graphic controller in their notebook) also.
View 2 Replies
View Related
Apr 14, 2010
I should install a new openSuse 11.2 or if I should make an Update-Installation from DVD (see openSUSE 11.2 Installation Quick Start Installation Mode: Select Mode - New Installation / Update / [...]) or an Update Installation via Yast.Now I am using openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition).
Contra new installation?:
- I have an Laptop (Samsung x20) with integrated intel 915 graphic and an very hight resolution (1400x1050). The monitor's resolution is not listed in the bios of the graphic cart/solution. Because of that I had many problems with my fist installation of suse/openSuse linux.
- Will I have problems to keep my old accounts?
Pro new installation?:
- Sometimes funny system reports (mostly about ICE).
- I have been logged in as root in Gnome (as I had some problems with (no) audio, the digital optical audio out is still not running).
- I think the fist installation was a few years ago maybe I had been to often "bold".
View 9 Replies
View Related
May 22, 2010
I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.
Code:
hwinfo --gfx
09: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.318]
UDI: /org/freedesktop/Hal/devices/pci_8086_42
[code].....
View 7 Replies
View Related
Mar 30, 2010
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies
View Related
Nov 8, 2010
i justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
View 9 Replies
View Related
Feb 23, 2011
I belive there is a problem with my graphics card, because when I start a VMware vm with accellerated graphics, i get this message: Code: Cannot open file "/home/joe/.vmware/dndlogs/ * dndlog.conf": No such file or directory. 3D graphics acceleration will be disabled. This computer does not have a 3D graphics system supported by VMware Workstation. My laptop model is the ASUS U52F-BBL9 btw.
View 1 Replies
View Related
Feb 1, 2010
I tried to install the NVIDIA graphic card drivers on my laptop XPS 1340, running with opensuse 11.2. There are two graphic cards, the integrated one and the NVIDIA one. I installed the drivers correctly by doing
wget ftp://download.nvidia.com/XFree86/Li...90.36-pkg2.run
su -c 'sh NVIDIA-Linux-x86_64-190.36-pkg2.run -q'
but when trying to configure the x-server
su -c 'sax2 -r -m0=nvidia'
I got the following error message in the /var/log/SaX.log NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
View 4 Replies
View Related
Jan 22, 2011
I have now a Nvidia card but how to make 3d work in Factory. Now I wonder if the Intel or Ati cards can do a better job and are easily to configure.
View 4 Replies
View Related
May 17, 2010
I installed openSuse 11.2 64bit (DVD version). Later I installed the graphic card driver. Then I noticed that it's not working well due to an improper installation (didn't use the manual that you provided here). So I uninstalled the driver. Then, after reboot, instead of a regular desktop, I get a CLI and I'm requested to enter my login information. But in the boot menu, if I enter to the failsafe option, then everything works fine. How can I change the CLI to the regular desktop?
View 9 Replies
View Related
Mar 24, 2011
I think i found out what was crashing my computer my Graphic card every time i start a game the computer goes down. I have a Ati Radeon 5570. Desktop Effects: Disabled System Info: 2d: fglrx 3d: ati I downloaded the Ati Drivers from the website after installing the Open Source not sure if that is causing a problem. Here are the steps i took. su - UNSUPPORTED="yes" sh ./ati-driver-installer-11-2-x86.x86_64.run --buildpkg SuSE/SUSE-autodetection zypper in fglrx* aticonfig --initial reboot It will crash whenever i start a game and randomly when i run ..... VLC etc.. Edit: Should i uninstall all opensource/ati and start over and if thats the case whats the best approach to this?
View 5 Replies
View Related
Apr 18, 2010
I have got notebook HP 4710s and I can't get drivers for graphic card ATI Mobility Radeon HD 4330. ATI repository for openSUSE and SLED doesn't working. Do you know when Can I get it?
View 2 Replies
View Related
Jan 7, 2011
I am new to Suse Linux. So please excuse me for this "funny" query. have read the threads: Configuring graphics cards in openSUSE 11.3
From here I went to this page: SDB:Configuring graphics cards - openSUSE Its mentioned on this page that: Upon installing openSUSE, the X system's automatic configuration may have failed to properly configure the graphics correctly. Typically this results in either a black screen upon reboot, or the wrong resolution being displayed on the monitor.
I have none of these problems. But after searching for inability of desktop effects to become activated, I found that nVIDIA graphic card drivers are must for these effects. After clicking "My computer" icon on desktop, I found Display Info as following:
Vendor: nVidia Corporation
Model: G98 [GeForce 8400 GS]
2D driver: nouveau
3D driver: nouveau Gallium (7.8.2)
Can anyone tell me 'Is nouveau an alternative for nVIDIA'? Is this the reason for no wrong resolution or black screen upon boot. That means my computer graphics are working correctly. Then why does Desktop Effects are not getting enabled.
After searching for Kaffeine media player extra codecs to play media files, I incidentally found the following options: I opened Yast Control Center @ linux-o26a Software> Add on Products > installed Add-On Products > Community Repositories > clicking Next, this opened a window with "List of Online repositories" where there is an option of "NVIDIA Repository". If I install it, will it enable the "Desktop effects"
View 9 Replies
View Related
Jul 5, 2011
How to configure X Window on opensuse 11.4 and older x86 hardware with 32MB graphic card?
View 9 Replies
View Related
Dec 6, 2010
Well, i guess it is the graphic card:
I tried to watch a flash video on full screen; then the screen went black with some glitches and then my laptop suddenly shut down. I couldn't start opensuse back again, the screen goes black and freezes. I tried restarting in windows, and it freezes too. However, opensuse in failsafe mode works.
After that, i tried reinstalling opensuse. This time, i can start normally, but after a while, the screen shows some glitch (the updater applet looked wrong) and freezes. Windows isn't loading either, but opensuse failsafe mode is still working ok.
I guess it is a hardware problem (since windows also crashes). However, i would like some help to run "diagnostics" to my system.
My graphic card is a nvidia 8400 gs, and i am running opensuse 11.3
I was using the nvidia driver i found in opensuse-community (installed quite a long time ago); however, after i reinstalled, i was using the default driver. It is possible that my kernel was updated a couple of days ago (but i am not really sure of that)
View 9 Replies
View Related
Mar 7, 2011
I would like to know if I will be able to work on my laptop with 11.4 , someone knows if something changed with hang/freeze issues? Currently I have installed 11.1 but since repositories were removed no updates or new software for me so I'm considering installing something new.
View 7 Replies
View Related
Jan 10, 2010
I can only log into X with "vesa" driver (otherwise it gives me the black screen) and ubuntu never boots directly into GDM, always the console.
View 1 Replies
View Related
Jun 6, 2014
I'm trying to set up an HP DisplayLink USB graphic adapter on Debian 6 to be paired with the notebook's integrated Intel i915 video card. I use a custom 3.11.1 kernel in which the options for VGA arbitration, fbdev framebuffer and DisplayLink driver are enabled as built-in, not as modules.
The device works and I'm able to correctly run an X session on a DVI monitor connected to my notebook thru this USB graphic adapter. However, I'm still not able to use both the DisplayLink device and the integrated Intel i915 at the same time under X, with the purpose to extend the desktop area over the two screens, side by side.
During a boot, if the DisplayLink adapter is detected over the USB cable, the X-server's Intel driver is repudiated as shown in the logs below, and the main notebook's screen stops working with X. (nonetheless, it still functions on the "Alt-F1" text terminal).
Relevant portion of /var/log/Xorg.0.log
In particular, it shows: [ 2509.084] (II) UnloadModule: "intel"
Code: Select all[ 2509.061] (II) FBDEV: driver for framebuffer: fbdev
[ 2509.061] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
[Code] ....
In case it is required, this is the relevant excerpt of my xorg.conf. In my full xorg.conf file installed locally, no other options deal with graphics or screens.
Code: Select all# All down here is required for DisplayLink
# Depth must be 16 bits for all the screens to support DisplayLink
Section "Device"
Identifier "IntelVideo"
Driver "intel"
EndSection
[Code] ......
View 1 Replies
View Related
Dec 23, 2010
i have an Acer aspire 4920 laptop with opensuse11.3 installed and wifi card has identified home wifi, but for some reason when i enter the wpa-psk key it doesnt connect.i have been at this problem for several days and scanning the net for answers, without joy.i dont know about the command or terminal line, i have tried to type in commands but i get no joy.
View 4 Replies
View Related
Feb 1, 2010
I'm about to buy a laptop and there are some interesting and affordable Toshiba ones, but they all have Intel GMA 4500M graphic card. I have NVIDIA card on my desktop and their drivers work perfectly, i was just wandering what the situation with Intel's graphic cards is. I need 3D rendering for compiz and stuff, is it too much of a hassle to enable them?
View 2 Replies
View Related
May 23, 2011
Having trouble with video and windows/links/applications etc on 10.10, just came from windows 7 with everything fine. had 10.04 on my desktop with nvidia card, was easy to get that driver installed, but intel i cant find the correct information. on a laptop, compaq presario cq56. can anyone help out?
View 7 Replies
View Related
Nov 9, 2010
I have a Dell Latitude E6500 running Opensuse 11.3. As far as I can tell the module for my wireless card is loaded correctly and it's working:
Code:
sudo lspci | grep -i wifi
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Code:
[ 556.642557] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 556.642560] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[Code].....
The funny thing is that it works fine in a Fedora installation, which has an older kernel and older drivers, on the same laptop. The fact that the indicator light doesn't come in when the physical switch is turned on suggests it's something to do with that switch.
View 6 Replies
View Related
Sep 16, 2010
I have been waiting on installing ubuntu on my mid 2010 MBP 15' for a while now. I was wondering if the dynamic GPU switching was supported yet. Does Ubuntu recognize the intel card and can I use it over the nVidia card?
View 1 Replies
View Related
Feb 14, 2011
I installed ubuntu but when I first tried to login with my correct passwords it goes in a loop and prompt me to log in again. I went to recovery mode and selected safe mode then I was able to log in without any further prompts. As a result of what happened, I unlocked the login screen and changed the setup to allow me to log in automatically and in safe mode only. I am now stuck to login in safe mode only. I tried to unlock the login screen to change to default but no chance. If there is no graphic card in the PC would that have an effect on memory or login?
View 4 Replies
View Related
Jul 20, 2009
How do you enable the graphic card? i have an ATI one and using fedora
View 2 Replies
View Related