I've tried for months, to install a version Fedora where there could not exist any glitch with the graphic card, but without a solution. I recently have taken the path of linux systems, so I'm kinda new with this problem and don't know what to do ! The glitch make some horizontal lines dancing in screen, or can't even read anything. Here you have the spec : [URL]
View 1 RepliesWell, i guess it is the graphic card:
I tried to watch a flash video on full screen; then the screen went black with some glitches and then my laptop suddenly shut down. I couldn't start opensuse back again, the screen goes black and freezes. I tried restarting in windows, and it freezes too. However, opensuse in failsafe mode works.
After that, i tried reinstalling opensuse. This time, i can start normally, but after a while, the screen shows some glitch (the updater applet looked wrong) and freezes. Windows isn't loading either, but opensuse failsafe mode is still working ok.
I guess it is a hardware problem (since windows also crashes). However, i would like some help to run "diagnostics" to my system.
My graphic card is a nvidia 8400 gs, and i am running opensuse 11.3
I was using the nvidia driver i found in opensuse-community (installed quite a long time ago); however, after i reinstalled, i was using the default driver. It is possible that my kernel was updated a couple of days ago (but i am not really sure of that)
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies View RelatedI've been having this glitch since Maverick. I hoped installing Narwhal would solve it (clearly not), I like Ubuntu, but this makes the OS frustrating and pretty much unusable, forcing me to stick with Windows.
The glitch appears randomly but mostly within 5-10 minutes after booting.
Another thing : when you want to screenshot the glitch, it usually gives you a perfect image, with everything OK. I have no idea why it worked now. I have a Packard Bell Dot M Netbook.
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies View Relatedi justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
How do you enable the graphic card? i have an ATI one and using fedora
View 2 Replies View RelatedI've already got two installs without much problems.. one on my laptop and another fedora13 install on an older comp just to test it a bit before installing it on my main comp. But now I've got a problem. Both those install went without problems but when I started installation on my main comp first I've noticed some graphic problems when there is installation started and there is mouse and fedora 13 welcome installation screen. there are some like glitches or something no idea how to describe them.. like bad pixels in small upper part of the screen. But ignoring that everything went OK up to the part where I can choose a standard discs or non starts like sans and stuff..
When I choose standard disc installation just freeze there. No idea what is happening. Only this that came across my mind is that there is a problem with raid maybe? There are 2x640Gb HDD in raid0, there is win7 installed, and another 1Tb HDD, non-raid member disk, where I would like to install Fedora and have a dual boot. Still got programs that I need win for I'm afraid. Installation went smooth on laptop and another comp but there is no raid so I'm guessing that could be a problem. This comp where installation froze is in short:
[Code]....
How can I find the right driver for my graphic card? I have nvidia FX 5500.
View 1 Replies View RelatedI just installed fedora12 on my machine,But it didn't recognize to my graphic card! my ATI card type is radeon 9550.
View 6 Replies View RelatedI have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
I installed ubuntu but when I first tried to login with my correct passwords it goes in a loop and prompt me to log in again. I went to recovery mode and selected safe mode then I was able to log in without any further prompts. As a result of what happened, I unlocked the login screen and changed the setup to allow me to log in automatically and in safe mode only. I am now stuck to login in safe mode only. I tried to unlock the login screen to change to default but no chance. If there is no graphic card in the PC would that have an effect on memory or login?
View 4 Replies View RelatedI've got a problem to use intel graphic card and kde. When I enable opengl support it seems threa re refresh problems, botton now are visible, now not, it seems a blinking effect and when I move the pointer it seems kde try to re-draw the object but the object get invisible, so a relay mess. Xrender instead work but it's slow. Whit opensuse 11.2 all was ok. glxgears however shows me pretty good performance so I don't understand where is the problem.
View 7 Replies View RelatedI wonder if there is any chance to one day be able to code a graphic card (i.e NVedia and CUDA) with GNU software (i.e gfortran) like PGI dos with its fortran compiler.
View 4 Replies View RelatedI'm a new user of slackware
is there is anyone know how to install driver of my graphic card..
I'm using slackware 13 and acer aspire 4741..
so i have motherboard with a integrate graphic card and, i want to to install a new graphic card ( geforce 6200A)when i boot my PC on new graphic card , i have a panic kernel and when i remove the new graphic card and boot with the old card => it works can i configure centos for the new graphic ? and where , what's folder ?
configution : centos 5.3
I just installed Debian 5 in my pc. I have made all the updates but my screen is a bit bright and the resolution isn't very good. I think that i need to install the graphic card driver but all the solution i find in google didn't work . My laptop is Toshiba satellite pro u400 and my card is Intel GMA 4500 MHD.
View 4 Replies View RelatedI inserted another graphics card to my computer to use 3 monitors. The card appears in lspci but I can't access it in gnome.
What do I have to do to set this up.
Here is the output of my xorg.log: [URL].....
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV530 [Radeon X1600 XT/X1650 GTO]
I just installed a fresh Debian testing on my laptop with a VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09). Although X is running seems like it's rather slow. As there’s no xorg.conf
How the graphic card could be configured using the appropriate driver.
I try to boot up Ubuntu.It seems like everything goes on as normal (I can tell from sounds), but the screen becomes just a jumble of randomly colored lines (see photos; I couldn't get screenshots for obvious reasons).I also included some info about my computer (see pic), but I don't know anything about my graphics card, how do I find that?
P.S. I just installed a fresh version of 10.04 Lucid (dual-boot with WinXP), and as far as I remember, I haven't changed any settings or even installed any software yet!
I am trying to install lucid lynx on this laptop [URL] and I am getting the blank screen problem at installation. I tried nomodeset, vga=771, xforcevesa and a couple more and nothing seems to work. I have a livecd I burned a couple months ago. If I delete the quiet splash line at the livecd I get some repeating text too fast to see and after a couple of mins the laptop shuts off by itself. what can I do to get lucid lynx working on this pc?
View 2 Replies View Relatedim running ubuntu 11.4 im trying to install amd catalyst 11.4 for my x1300 ati graphic card but when i installed it my system couldn't start and i had to start in recovery mode for removing tha package. i think i have done something wrong with the packages how to install ati catalyst 11.4 on my x1300 graphic card
View 1 Replies View RelatedI belive there is a problem with my graphics card, because when I start a VMware vm with accellerated graphics, i get this message: Code: Cannot open file "/home/joe/.vmware/dndlogs/ * dndlog.conf": No such file or directory. 3D graphics acceleration will be disabled. This computer does not have a 3D graphics system supported by VMware Workstation. My laptop model is the ASUS U52F-BBL9 btw.
View 1 Replies View RelatedI wish to implement some part of my codes to use the GPU of my graphic card but I have no idea whether GNU as already implemented it (as for OpenMP). I mean, there are PGI Fortran compiler which embedded CUDA but I figure it's not free. I also wonder if that works only with ATI graphic cards or if for instance I can use my Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller.
View 4 Replies View RelatedATI Radeon HD 4350 256MB DDR2
Product id: 11142-08-20R
After struggling for days with trying to install with GUI - did not work Tried installing with "linux text" - installation went through - but I get no Centos GUI logon/desktop Tried installing with network installation - installation went through - but I get no Centos GUI logon/desktop Even tried making CentOS - USB pens, installing from, and booting from.... without luck. ...then finally, I got some "smileys"...
Solution:
I downloaded the ATI package for the card;
[URL]
I installed this;
sh ati-driver-installer-10-10-x86.x86_64.run
...and then I rebooted.After boot, I only got terminal (tty1) and I did:
"startx"
NOW - i finally got GUI But the whole problem seems to driver support for new graphic cards.So what I did was actually find an old card, Radeon 7000, installed this.. I got the Centos installation - GUI, installed gnome and ...
However I have problem to install my graphics card Asus ATI Radeon HD 6750 Formula....
View 4 Replies View RelatedI have one Asus motherboard with inbuilt HD 3300 Radeon family graphics system, I have used it with radeon and radeonhd drivers and I have xorg.conf. I tried to change card to Radeon HD 4350 but it didn't give more than terminal view, Xdm didn't start. I believed the driver would support both cards?
View 1 Replies View RelatedI'm trying to make things work on my laptop. Almost done, but there is one hardware issue left. I have a Intel HD4400 graphic card. But it seems that it is not recognized. I had an issue loading Gnome3.
Code: Select allGNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.
This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience
Another thing :
Code: Select all$ grep EE /var/log/Xorg.0.log
[ 29.117] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
Also, if I go in "applications" ->"system tools" -> "Preferences" -> "System settings" and then in "Details, under Graphics I have "Drivers : unknown", "Experience : Fallback".
And as a consequence, I can't use dual-screen. If I plug another sreen, I have an exact copy, not even with a good resolution.
I search on the web for solutions, but I didn't understand much. I don't know what Xorg is, x-window, etc...
I tried to install the NVIDIA graphic card drivers on my laptop XPS 1340, running with opensuse 11.2. There are two graphic cards, the integrated one and the NVIDIA one. I installed the drivers correctly by doing
wget ftp://download.nvidia.com/XFree86/Li...90.36-pkg2.run
su -c 'sh NVIDIA-Linux-x86_64-190.36-pkg2.run -q'
but when trying to configure the x-server
su -c 'sax2 -r -m0=nvidia'
I got the following error message in the /var/log/SaX.log NVIDIA: could not open the device file /dev/nvidia0 (Input/output error).
I have now a Nvidia card but how to make 3d work in Factory. Now I wonder if the Intel or Ati cards can do a better job and are easily to configure.
View 4 Replies View Related