Fedora Hardware :: Bad Start-up After Attaching External Monitor?
Feb 27, 2010
I have a Lenovo 3000 N100 laptop which LCD does not work anymore.So I borrowed a monitor from my friend and started using it(it has been few days).I had installed Fedora-12 few months ago. After connecting the external monitor, I found that this one shows good graphical start-up but just upto the login screen(just before the login screen, login-screen does not come) and it proceeds no more.Though I can get the virtual consoles restarting xserver is of no use
View 2 Replies
ADVERTISEMENT
Feb 27, 2010
I have a Lenovo 3000 N100 laptop which LCD does not work anymore.So I borrowed a monitor from my friend and started using it(it has been few days).I had installed Fedora-12 few months ago. After connecting the external monitor, I found that this one shows good graphical start-up but just upto the login screen(just before the login screen, login-screen does not come) and it proceeds no more.Though I can get the virtual consoles restarting xserver is of no use.
View 5 Replies
View Related
Dec 20, 2009
I have 5 Dell servers that I recently upgraded from 11-12 and have noticed an issue that after removing and re-attaching a monitor I am presented with the login screen. After logging in I am just presented with the background image, nothing else. I have logged in using ssh and restarted gdm with no effect. init 3 followed by init 5 still has no effect. Only when I restart with or without monitor attached does it start working as expected again.Has anybody else seen this issue? It was not present in Fedora 11 on these machines.
View 3 Replies
View Related
Jul 14, 2011
The problem is this: My movie collection is growing that large that it no longer fits on the 3TB storage I have available for it in my server.therefore want to start using external disks, but as I don't want to waste electricty I want to switch this drive on only when I want to watch a movie which is on this drive. This drive will be connected to my server running Fedora 15 x64. The movies will (most likely) be played by a machine running XBMC on an Ubuntu minimal install (10.04). Currently I use NFS to create a mount on this machine to my media folder.The question: How can I best setup this external drive and shares etc so to have these movies available from my XBMC machine when I switch on the drive, but nothing crashing when the drive is off (while the XBMC machine stays on)?
View 8 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
Aug 11, 2011
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies
View Related
Aug 17, 2011
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
View 5 Replies
View Related
Dec 28, 2014
I upgraded to jessie today and I am having problems with my background. When I log in, the background tries to start on the external monitor but then it fails to load. I can change the background in settings but it does not show up. The background just becomes black and I am not sure why.
View 3 Replies
View Related
Jun 20, 2011
I'm trying to execute some code (let's call it login.java) when I log in and out of my linux machine. Is there any way to do this? I'm looking for perhaps a way to trigger the code? I've thought of just putting it in my .bash_login but preferably the code would launch on normal login, not when I start my terminal.
View 2 Replies
View Related
May 17, 2011
I have a small problem after connecting a LCD monitor to an acer netbook. I need to figure out how to make the monitor the primary. Right now, the netbook has the panels, but the monitor has the desktop. I would like the panels and desktop on the monitor, even if that means not using the netbook screen. I have a screen shot below. I am running F13 with Gnome.
Edit: Never mind. I figured out how to disable the netbook screen using the function keys on the computer.
View 6 Replies
View Related
Aug 28, 2009
I installed FC11 on my laptop T43 and the video card is ATI Mobility Radeon x300. Now I have a problem of screen resolution with external monitor:
When I do presentation, I have to mirror the two monitors and both set to 1024*768, which is not perfect.
I remember that when I use RHEL 5 desktop edition, The system can automatically detect the external monitor and set it by itself ----- The laptop uses 1400*1050 and the external monitors such as projector uses 1024*768. But I haven't found such feature on FC11.
View 9 Replies
View Related
May 26, 2011
Previous Fedora releases allowed me to connect to my external monitor via an HDMI-DVI cable to use as my main monitor from my laptop. However, after I did a fresh install of Fedora 15, I have this problem that when I login to gnome 3, both laptop screen and external monitor go blank. I cannot ctrl-alt-f2 to go to terminal. I end up having to ssh from another machine and reboot. Each time, the reboot doesn't even work since I have to go and kill Xorg before it starts to reboot.plymouth and gdm seem to be fine and show up the external monitor. It is only when I login to gnome3 that I get the blank screens.
View 4 Replies
View Related
Aug 20, 2011
I have installed Fedora 15 64bit live with no apparent errors and I get to the "Welcome" where it says just a few more steps before I can start using Fedora after filling in the details hit the "Forward" button in the lower right hand corner. The problem is I can't see the forward button, its like I need to page down or something but everything I have tried isn't working. I then decided to use the Fedora 15 64bit DVD thinking a driver was missing or something and it is still the same issue. I am using a Thinkpad T61 laptop with an external monitor and the external monitor goes blank when it boots to the welcome screen, but I can scroll over to the external and see the mouse cursor on the external. It seems that if I could see the welcome screen on the external monitor that I might be able to see the "Forward" button. Both installs went without a hitch, the DVD install found my internet connection and downloaded a bunch of stuff and the DVD install took about two hours to complete, again with no errors reported. I hope I am not being daft here and missing something obvious.
View 2 Replies
View Related
Sep 22, 2010
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
View 2 Replies
View Related
Feb 14, 2010
I'm trying to connect an Altera USB cable to an XP VM hosted on Fedora 12. Virt-manager sees the device and I've attached it to the XP VM. However Windows doesn't see it. What do I have to do in order to get KVM to pass the USB device through to the Windows VM?
View 2 Replies
View Related
May 17, 2011
I have a PDSI TS230 server running redhat. I inadvertantly unplugged the mouse cable from the back. When I re insert it, the mouse not longer works. It looks like the system does not detect it anymore. Does anyone know how I can get the system to notice the mouse without rebooting the entire system?
View 6 Replies
View Related
Feb 11, 2009
I have fedora 10 installed and when my monitor is turned off the X session fails to start because it can not probe for settings. Is there a way to hard code the settings for x instead of letting them assign dynamically on boot?
View 1 Replies
View Related
Jan 23, 2010
i have my pc connected to my 24 inch lcd monitor via DVI and my laptop via VGA. i noticed ubuntu is slightly more blurry than the pc. would the difference likely stem from the manner of connection or faulty drivers on ubuntu's behalf?
View 4 Replies
View Related
Sep 13, 2010
i know this sounds stupid but on my xubuntu i cant connect my laptop to a monitor it connects on bootup so i can see the startup but i cant change after. ive tried a lot of things and i googled it and searched but no answer i have xubuntu 8.04
View 5 Replies
View Related
Nov 14, 2010
I am trying to view my pc on my new flat screen but am unsure of the settings. I am using ubuntu 10.10. I have been trying (and on ocassion succesfully, but never really understood what I have done) to view my pc through the monitor option under preferences. Selecting the different monitor size but always find my external monitor (ie TV) is to the left, right above or under the screen I see on my PC. Also I am unable to hear my PC through the TV. I should say this is a good quality flat screen and all I am unsure of are the correct settings to use my TV as an external monitor.
View 4 Replies
View Related
May 17, 2010
After the login screen, my laptop screen is active but the external LCD monitor hooked to my laptop goes blank which was active to that point.
Here are quite a few details which might help you in diagnosing the problem
alt + clt + f1 takes the monitor screen to command line but alt + clt + f7 fails to bring it back to GUI. The monitor just freezes!!
Contents /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
[Code].....
View 6 Replies
View Related
Oct 20, 2015
My system can't seem to detect the external monitor that I've plugged into my laptop using and HDMI cable. The monitor works when I'm booted into Windows so I know that it isn't a problem with the monitor or the cable.
When I run xrandr I get.
Code: Select allScreen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
LVDS1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 310mm x 174mm
1600x900 60.00*+ 39.99
1440x900 59.89
1360x768 59.80 59.96
1152x864 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
View 4 Replies
View Related
Dec 25, 2010
I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find.
If it matters my system is like this:
Archlinux
Linux 2.6.36
Xorg 7.6
X server 1.9.2
Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules)
When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr.
Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?
View 1 Replies
View Related
Jan 13, 2010
My experience with external monitors in Linux is harrying at best. It's getting better, but it still ain't perfect. My current experience (I have an nVidia card, with nVidia drivers, on a Vostro laptop):
Turn on computer (booting Karmic).
Connect external monitor
Click on System->Preferences->Display
Redirect to nVidia's tool
Perform at least 8 more clicks to enable secondary monitor.
Realize resolution isn't optimal and set it with another few clicks.
Click Apply
Accept changes
Quit, then really quit, the app.
I always have to set the resolution, it doesn't detect it automatically. The main screen is *always* on the external monitor no matter my settings. I'm screwed if I unplug the monitor but forget to go through steps 1-8, this time disabling the external monitor. I have to replug it in, then turn it off, then I can unplug it. If I unplug the external monitor and plug in another one (going through steps 1-8 twice more) with different resolution capabilities (e.g. a projector), the settings get all messed up again.
Why can't adding an external monitor be automatic? It nearly is on OS X for instance. I plug it in, and it automatically detects the monitor and makes it a secondary monitor, or mirrors them, or turns it on and turns off the laptop screen. All the while being consistent about it. When I unplug the monitor, it knows instantly that I've done that, and reconfigures the laptop screen once again.
I imagine the answer is because no one has stepped up to do it yet, or it's in progress. So my question: what *is* the state of external monitor codes in Linux, and are there any plans to implement them in Lucid? Further, what would be a project, with *user friendly* context, to which I could tune in?
Or, am I not aware of the "right way" to do it?
I define user friendly as roughly the level of kernelnewbies.org . That is, kn.org is my gauge of what I can understand.
View 1 Replies
View Related
Apr 30, 2010
I am using a Asus UL30A laptop computer. I just performed an upgrade from 9.10 to 10.04. I remember running into this problem before, but I forgot how to fix it. The problem is, when I plug my laptop into the external monitor with my laptop screen turned off automatically when I first log in, I do not see the mouse cursor on the external monitor! The mouse cursor is still here, although invisible - if I do a right-click, the property menu will come up. My current workaround is simple- if I switch to the next workspace (by pressing Ctrl-Alt-right arrow), the cursor will appear from then on.
View 1 Replies
View Related
May 10, 2010
I run Ubuntu on a MacBook Pro with an external monitor connected. But currently the external monitor only works with one user account. The External gets no signal and the laptop display is used on the login page. Is there any way of having the login page and possibly startup displayed on the external at all times for all accounts.
System > preferences > Display Doesn't work for me, I use NVIDIA X Server Settings
View 1 Replies
View Related
Jul 26, 2010
I have a Hp dv5000 Laptop (not that it matters) with ATI 200M graphics chip and Ubuntu 10.04 LTS. Compiz works perfectly on my laptop screen. But when using my 23" Monitor it just doesn't. If I try enabling desktop effects it tells me it can't. Through terminal ( runnning 'compiz')I get the following error:
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager
My /etc/X11/xorg.conf looks like this:
Section "Screen"
Identifier"Configured Screen Device"
Device"Configured Video Device"
SubSection "Display"
[code]....
View 2 Replies
View Related
Sep 22, 2010
I have an external monitor at work, but not at home. I take my laptop home and when I come back the settings are off. My monitor is above my laptop, so I have to rearrage displays and save every time its plugged in. Isn't there a system file or something somewhere that I can write to and save the current state as the default?
View 5 Replies
View Related
Jun 16, 2011
I just install Ubuntu OS 11.04 recently to my HP Mini 110 netbook. When I try to display on my external 20inch samsung monitor. I get the black borders as shown on the pic. Resolution of 1024 x 768 or higher will cause the problem whereas lower resolution will not have that black border.
View 2 Replies
View Related
Jun 24, 2011
I just upgraded my Ubuntu V10.4 LTS to Ubuntu 11. After that, I lost my external monitor and I cannot find those usual "preferences", "Administration" navigational menus on top of the screen.
Stumbled into Multiple Monitors under System, but it didn't detect the second monitor. However, the 2nd monitor was active and with system startup messages displayed there during reboot. But as soon as the desktop appear, that 2nd monitor lost its signal.
View 6 Replies
View Related
