General :: Automatically Switch To External Monitor (VGA)
Dec 25, 2010
I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find.
If it matters my system is like this:
Archlinux
Linux 2.6.36
Xorg 7.6
X server 1.9.2
Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules)
When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr.
Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?
I have a laptop that I use in three environments with different monitor setups.
1) At work, I have a 1280x1024 second monitor. 2) At home, I have a 1920x1080 second monitor. 3) In meetings and other places I have no second monitor.
Whenever I switch between these setups, which is at least several times each day, I have to manually change the monitor configuration. I use the nvidia-settings tools.
Granted, it only takes a few seconds. Is there a way to make the system smart enough to automatically detect when a monitor is added or removed, know *which* monitor is attached, and reconfigure the resolution and monitor layouts the way I want them?
My laptops screen has recently gained an annoying blue tint, which i do not have the expertise (or money to pay somebody) to fix, so i am using my TV as an external monitor. So what i am proposing to do is purely use the External and leave the laptop monitor off. I am dual-booting Windows XP and Ubuntu 10.04 Devel, In XP it was a simple case of right clicking the Intel Graphics Media Accelorator and choosing the External Monitor option, this then allowed me to set my resolution to 1280x960 and i was happy. (even bigger desktop than before actually)
I cannot seem to find this option in Ubuntu, going through System -> Prefrences -> Monitor gives me the option to mirror the screens, but that leaves me with an incredibly low resolution, choosing to not mirror the screens allows me to set the resolution to 1280x960, but the LCD screen still acts as my main. Is there any way I can set it to recognise the TV as the main, and switch off the LCD like I did in Windows?
I am looking for a way to switch quickly and easily between my Laptop Display and my External Monitor, in Windows I had it configured so that when I plugged my Monitor in it would switch to that and when I removed it it would switch back to Laptop Display. From what I have tried it looks like this isn't possible with Linux, but I would like to get to the stage when I can click an icon to switch (or 1 to go to External and 1 to go to Laptop) My Laptop has an ATI Mobility Radeon HD 4500 Series Graphics Card and I have so far noticed the following issues.
1. If I use the Gnome Monitors instead of ATI Catalist Control Centre it seams to cause some strange issues include confusing Linux on what the max screen res supported by my External Monitor is.
2. When I try and enable/Disable either Display or change Resolution, I am told that I have to reboot before the changes take affect.
I don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
I've installed Ubuntu 10.10 on my Macbook Pro 5,5. Everything is running fine with some tweaks. Just one thing bothers me: when I tell Nvidia X Server Settings that I want to use my external screen as primary screen it doesn't put the gnome panels to the other screen, well... sometimes it does after a couple times but most of the time it doesn't.is there a way to automatically detect when I connect a monitor instead of going to the Nvidia settings? Just the way Mac OS X does?
My computer is running mythbuntu 9.10 on a 24" LCD monitor using VGA. The monitor also has a DVI input where I run my Roku movie box with a HDMI to DVI cable. Is there software that I can run on my mythbuntu pc that will allow the user to pick which output would be active on the monitor? I can disconnect the Roku power to get back to my pc but I need the pc to switch over the monitor to the Roku.
In my college many proxy : port (like 144.16.192.245:8080)are using to get Internet connection, performance of each proxy changes, how can i decide which one is working well at particular time. is there any way to switch over them automatically?
I am using DELL Latitude E5510 laptop with docking station. The problem I am facing is I am not able to switch screen b/w monitor and laptop screen, I tried with fn+F8 key. Actually I have installed open SuSE11.3(Linux) operating system.
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again. When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
Does anyone know what program I can use to set it up so when I plug in a VGA or HDMI monitor it automatically sets up video output?-P.S. -This is on a ArchLinux install with PekWM for the window manager
I have a Lenovo 3000 N100 laptop which LCD does not work anymore.So I borrowed a monitor from my friend and started using it(it has been few days).I had installed Fedora-12 few months ago. After connecting the external monitor, I found that this one shows good graphical start-up but just upto the login screen(just before the login screen, login-screen does not come) and it proceeds no more.Though I can get the virtual consoles restarting xserver is of no use.
A few days ago I installed browserlinux onto my AspireOne netbook whilst connected to a 15" external monitor of 1024x768 at 60Hz. During installation I ran the Puppy Xorg Wizard with the netbook's monitor (1024x600) switched off. It selected the optimum resolution of my external monitor correctly as 1024x768 and the 'intel' driver for the Intel 945 Express chipset. However when I ran programs and maximised their windows they would cut off about a third from the bottom. I ran the Xorg Resolution Wizard which showed a resolution of 1024x600 despite xorg.conf only showing an option of 1024x768. I tried to copy a xorg.conf from Linpus (Fedora 8) which had required some altering in the past to run the external monitor at the correct resolution but X failed to start (possibly because Xorg in browserlinux is a newer release). Would it be possible for someone to upload a xorg.conf file which would enable display the external monitor at the correct resolution (and ideally allow switching between the two monitors - under Linpus the hotkey is Fn + 4) or suggest alterations to the current file?
I'm using Xorg 7.5 on a Radeon HD4870 with the FOSS radeonhd server on my HP 6830s. The laptop has a VGA connector and I attach it to a 37" panasonic plasma TV. It works fine except for a little annoyance: when activated, the TV screen is set to the resolution of 1360x768 (which it reports as being the highest it supports) but all the image is shifted by about 100 pixels to the right. I can't see the leftmost part of the page, and I have a black vertical bar to the right.
If I change the resolution to 1024x768 there is no shifting, the image fills the entire screen with no parts hidden, but at this resolution the image is stretched. How can I tune the position on the external monitor so that the image is centered in the screen filling it entirely?
How can I detect when an external monitor is connected in linux? I need to run various scripts to set up my workspace. Is there some clever way to kick off a script when the monitor state has changed? I'm using the Nvidia display driver.
I have an Acer Aspire One AO150 and am having trouble plugging in an external monitor under Ubuntu 9.10. There were no problems under 9.04. If I plug in an external monitor once the machine is already up, then bring up the 'display' application to activate it, it basically hangs. There are no problem under these circumstances if I have desktop effects turned off.
A few more details after a question below. The machine does not respond to its keyboard commands to switch to an external monitor, nor does it respond to Ctrl-Alt-F1, etc to switch out of X. The pointer is visible on the monitors (at the edge of each) and is frozen as a 'busy' cursor, but with no animation. The kernel does respond to SysReq commands (REISUB).
In the latest attempt I had the external monitor active earlier, then removed it and activated desktop effects. Upon plugging in the eternal monitor then bringing up the display application, it hangs.
I connected an external 22" monitor to my new linux netbook and now I am trying to improve the display clarity. By shifting the "clock" monitor bar to 100 ,the letters were less faded but edges of my screen were lost (by zooming in). Can I fix that through Linux?
I have an HP Pavilion dv9000 which I would like to use completely with any Linux OS. I have tried to install Linux Ubuntu 10.04.1 but it appears that it doesn't recognize the external monitor and ends the installation. I have a clean hard drive that I could install but I do not know which of the two drives I should replace. I can only get into windows in safe mode and I would think this may have something to do with the problem, don't no.
I've got a laptop running Backtrack4 and an external tv/monitor. Is there a program/command/configuration file that I can use to allow my laptop and monitor to connect with one another via HDMI?
Using Ubuntu Linux for some years now I love CUPS functionality to switch on the printer (at least my USB connected HP Deskjet) automatically when a new print job has been submitted to CUPS. This does not work in Fedora 15? Does anyone know how to enable this or has the new CUPS or any other component lost this functionality?
I've been tasked with setting up a wall board display monitor for our monitoring applications and it's got to look good! I was hoping to use opensuse 11.4 & the KDE desktop effect of the cube and I'm trying to find a way to make the screens rotate in a timed manner.
Is this possible and if not can anyone suggest a good way to switch between multiple displays automatically?
In 10.04 when i plugged my HiFi into a USB port audio would automatically switch to play out of it.Now in 10.10 i need to plug my hifi in then go to 'sound preferences'>'output' and select USB codec as my output AND unmute the device.Does anyone know of a way to revert to 10.04 behaviour?
Sometimes during the system startup I get this message:
It seems that you do not have the hardware required to run Unity. Please choose Ubuntu Classic at the login screen and you will be using the traditional environment.
According to:
[URL]
I can change switch from the Unity Desktop to the classic GNOME Desktop, but howto configure to do it automatically over Autologin?
In my college many proxy : port (like 144.16.192.245:8080) are using to get Internet connection, performance of each proxy changes, how can i decide which one is working well at particular time. is there any way to switch over them automatically ?
if I use xset dpms force off, then the monitor sleeps only few seconds (sometimes miliseconds and then goes up again without moving mouse, ... (by itself)But it is no system problem - if the monitor is switched off from GNOME - e.g. after 10 min, then it stays sleeping up to some action (mouse, keyboard, ...).Why do it not work if switched off manually
