I'm trying to connect an Altera USB cable to an XP VM hosted on Fedora 12. Virt-manager sees the device and I've attached it to the XP VM. However Windows doesn't see it. What do I have to do in order to get KVM to pass the USB device through to the Windows VM?
View 2 RepliesI have a PDSI TS230 server running redhat. I inadvertantly unplugged the mouse cable from the back. When I re insert it, the mouse not longer works. It looks like the system does not detect it anymore. Does anyone know how I can get the system to notice the mouse without rebooting the entire system?
View 6 Replies View RelatedI have 5 Dell servers that I recently upgraded from 11-12 and have noticed an issue that after removing and re-attaching a monitor I am presented with the login screen. After logging in I am just presented with the background image, nothing else. I have logged in using ssh and restarted gdm with no effect. init 3 followed by init 5 still has no effect. Only when I restart with or without monitor attached does it start working as expected again.Has anybody else seen this issue? It was not present in Fedora 11 on these machines.
View 3 Replies View RelatedI have a Lenovo 3000 N100 laptop which LCD does not work anymore.So I borrowed a monitor from my friend and started using it(it has been few days).I had installed Fedora-12 few months ago. After connecting the external monitor, I found that this one shows good graphical start-up but just upto the login screen(just before the login screen, login-screen does not come) and it proceeds no more.Though I can get the virtual consoles restarting xserver is of no use
View 2 Replies View Relatedhello everyone.I've created a application that uses laptop camera as the interface and uses the gestures made by finger movements in air to perform clicking an right clicking operations.i just need to know how to attach this application to the OS kernal so that i can perform various operations like closing window,opening applications etc.
View 1 Replies View RelatedI have a file opened in vi running in a terminal(xterm), if I directly closes the terminal without first closing the file then I can see the vi still running in the background(ps x). Now is there any way to attach that process i.e. vi to some other terminal so that I can continue my work on the file. I have also tried fd command but it fails.
View 4 Replies View RelatedI can't, for the life of me see a way to attach an image to a forum post. Maybe it's time for a nap, it has been a very very long day. I've seen attached images on this forum in the past.
View 3 Replies View RelatedI want to attch libCoherence.so while creating my new static lib, bcse my lib functions use libCoherence.so.
My Makefile :
Code:
CC=/opt/studio12/SUNWspro/bin/CC
CFLAGS=-errtags=yes -g -c
all: libCoherence.a
[code]....
But if I remove "/export/home2/Coherence/coherence-cpp-32bit/lib/libcoherence.so" from Makefile, build went fine.
How to send an ordinary file as well as an Excel file as an attachment while sending mail in redhat.
View 5 Replies View RelatedI have attached another disk to my system and want to append it to /home which is currently /dev/sdb. How can I do that?
View 8 Replies View RelatedI have a Lenovo 3000 N100 laptop which LCD does not work anymore.So I borrowed a monitor from my friend and started using it(it has been few days).I had installed Fedora-12 few months ago. After connecting the external monitor, I found that this one shows good graphical start-up but just upto the login screen(just before the login screen, login-screen does not come) and it proceeds no more.Though I can get the virtual consoles restarting xserver is of no use.
View 5 Replies View RelatedI'm trying to execute some code (let's call it login.java) when I log in and out of my linux machine. Is there any way to do this? I'm looking for perhaps a way to trigger the code? I've thought of just putting it in my .bash_login but preferably the code would launch on normal login, not when I start my terminal.
View 2 Replies View RelatedI have a wireless router with a 4-port switch built in. The router is a Linksys WRT310N. I have more than 4 devices that I would like to connect through wired connections...so I have an 8 port switch that I connect into one of the 4 ports on the back of the router. Whenever I do this, the wireless functionality stops working! To get wireless back, I just have to unplug the gigabit switch (and unplug/plug in the router) and wireless is back up and running.
It doesn't seem to matter which port I plug the switch into so that isn't the cause of this. Also, I can connect up 4 devices where none of them is a switch (i.e. 4 computers) and wireless still works just fine -- so it doesn't seem to be a problem that there are 4 devices attached. when the switch is connected to my router, the devices behind it work just fine. However, the wireless devices all obtain 169.254.*.* addresses so clearly the clients are failing to obtain an address from the router (the DHCP server).
On Ubuntu Maverick I wish to choose which application starts when I attach my Canon digital Camera. I seem to remember this choice appearing a long time ago and I chose Picasa. How can I change it to another application? It is not available under "Preferred Applications" as could be expected
View 2 Replies View RelatedI am sure there is a nice guide out there somewhere but I cannot find it. My question is: The company I work for has a fully windows environment, servers and clients. The current server is on a Windows 2000 Server and I plan on replacing that. I wish to use Ubuntu server with Joomla for this purpose. This is my first venture into a purely command line interface, although I have played around with Ubuntu desktop in the past. My first question right now is: How do I log onto the Windows Network (active directory) from the ubuntu server. eth0 is reporting a valid internal IP on the network, so its been picked up okay.
Edit: I also want to assign a static internal IP address instead of grabbing from the DHCP. Edit2: Thinking about it, as the ubuntu server and windows server can ping each other do I even need to log into the domain? The server will only be serving web pages.
I just bought a Promise FastTrak SX8300 and it completely doesn't work on Linux (contrary to what the support page on promise leads one to believe). As far as I can tell, the last time Promise's drivers compiled on Linux 2.6 was many releases ago (and no one I spoke with at their tech support even knew the Linux basics). So, unless anyone has an idea of how to get it to work - I'm going to look for a different SATA controller.
The SATA Controller on my $400 opteron motherboard died - and it is just out of warranty. Many motherboards can be had fairly cheap now - basically for the same price as a PCI-32/64-bit SATA controller with the same number of ports, itself (and the majority of us have no need for ultra expensive hardware RAID when software on Linux does many things better). There is huge shortage of non-raid SATA controllers, however (and as we know only a subset of any given uncommon hardware is supported by Linux). Unless I have overlooked something, do any of you know of non-raid SATA controllers that are supported by Linux and have a reasonable number of ports (6-12)?
The problem is this: My movie collection is growing that large that it no longer fits on the 3TB storage I have available for it in my server.therefore want to start using external disks, but as I don't want to waste electricty I want to switch this drive on only when I want to watch a movie which is on this drive. This drive will be connected to my server running Fedora 15 x64. The movies will (most likely) be played by a machine running XBMC on an Ubuntu minimal install (10.04). Currently I use NFS to create a mount on this machine to my media folder.The question: How can I best setup this external drive and shares etc so to have these movies available from my XBMC machine when I switch on the drive, but nothing crashing when the drive is off (while the XBMC machine stays on)?
View 8 Replies View RelatedWhere did they hide System->Preferences->Hardware->Removable Devices in Fedora 13?
View 7 Replies View RelatedI managed with fstab but at restart came a black screen.I have called an HD '7200' then I reinstalled Fedora. And it does not automount it anymore. I changed fstab and black screen.
View 5 Replies View RelatedSomething very strange has happened. For some reason when I plug in a USB device into my F12 rig up pops a error saying,Code: Unable to mount <name of device> file systemNot Authorised When I try to mount from the CLI I get, Code: mount: can't find /dev/sdb1 in /etc/fstab or /etc/mstab I'm not really sure what this is telling me or what I need to do to fix it.
View 4 Replies View RelatedI'm working on a server and noticed that the to RAID5 setup is showing 4 Raid devices but only 3 Total devices. It's on a fully updated CentOS 5 system that only has three SATA drives, as it can not hold anymore. I've done some researching but am unable to remove the fourth device, which is listed as removed. The full output of `mdadm -D /dev/md2` can be see below. I've never run into this situation before.Anyone have any pointers on how I can reduced the Raid Devices from 4 to 3? I have tried
mdadm /dev/md2 -r failed
mdadm /dev/md2 -r detached
but neither work and since there is no block device listed I'm not quite sure how to get things back in sync so it's only seeing the three drives.
/dev/md2:
Version : 0.90
Creation Time : Tue May 25 11:07:04 2010
Raid Level : raid5
[code]....
After the usual mild annoyances inseparable from a Fedora release (installation from the LiveCD worked OK, but generated a requirement for 162MB of day-one updates, followed by something like 150MB of downloads to install OpenOffice - which comes as standard with Ubuntu/Mint/Mandriva and, no doubt, many other distros) I have been able to get the system working reasonably well. If there are major performance gains from the use of ext4, I have been unable to detect them. However, the only really frustrating issue from my perspective has been the difficulty in getting my two printers (both of which worked straight out of the box in the other distros mentioned above) to actually print. The devices in question are a Brother 2140 laser printer and an HP 2280 multi-function inkjet.
Both of these devices were properly recognised by the system, but neither would actually print (there were some initial signs that action was imminent, but no result - the printing processes were finally shown as having been stopped). I removed both printers, and started from scratch. The laser printer could not be persuaded to work, either with the recommended 2170 driver or the old faithful 2060-gutenprint driver. However, when I tried to add the HP, the printer utility advised that I needed to install "hpijs" before proceeding. This I duly did, and the HP 2280 then worked fine. On the basis that my only aim was to get the printers working, I decided to ignore the recommended drivers for the Brother 2140, and select the "2060-hpijs" version. This worked fine, and others may like to try this workaround.
How do I stop automounting USB devices in Fedora 11?I have put the following in a file under /usr/share/hal/fdi/policy/10osvendor/01-stop.fdi. I have even put a copy in /etc/hal/fdi/policy/. Nothing works.
<?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
[code]...
I just noticed that USB devices aren't being detected by kde when i plug them in. they work fine in gnome and the kernel detects them properly (seen via dmesg) but they're not being seen in kde.
View 14 Replies View RelatedRecently I installed Fedora 12 without any hassles except that the USB devices are not getting detected. I checked with /proc/interrupts and the ehci_hcd module doesn't get any interrupts. Here is my dmesg (done to show only USB related messages) :
Code:
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
[code]....
What I am trying to do is the following: I have many IBM MT-M 6223 towers (Intel Xeon processor) that need to run a certain Fedora 9 configuration. It is working on one box, now it needs to be replicated on all of the others. What is being done is the working box is cloned, and then that image is loaded on all of the others.These boxes have 5 total Ethernet devices. There is one on-board port, and there are two 2-port expansion cards for a total of 5.
There was one initial problem out of the gate that has since been solved (or perhaps not completely). What was happening is that the boxes that received the cloned image had their Ethernet devices misnumbered. Instead of eth0 through eth4, they were numbered eth5 through eth9.This was eventually traced to the following file: /etc/udev/rules.d/70-persistent-net-config. That file contained the original settings from the box that was first cloned. It had eth0 through eth4 at the top with MAC addresses belonging the box that was the source of the cloned image. It looks like this mismatch was detected, and five more entries, numbered eth5 through eth9, got appended to the bottom with MAC addresses belonging to the new box.
Once /etc/udev/rules.d/70-persistent-net-config was deleted, and the machine rebooted, the 5 ethernet devices came up with the correct numbering (0 thru 4). /etc/udev/rules.d/70-persistent-net-config was rebuilt with the correct devname-MAC pairing.
Now for this new problem.... Part of the configuration across all these machines is that only eth3 should have an IP address. It is a static IP address set through the /etc/sysconfig/network-scripts/ifcfg-eth3 file. All of the other devices must NOT have any IP address. They are either not used or used only for raw Ethernet.After clearing out /etc/udev/rules.d/70-persistent-net-config, /etc/sysconfig/network-scripts/ifcfg-eth3 was edited to give the new box its own unique static IP address before rebooting.Sample ifcfg-eth3 file:
Code:
DEVICE=eth3
BOOTPROTO=static
[code]....
I've been struggling a bit with install F11. F10 installs without issue. I have two internal SATA drives, a PATA DVD-ROM and a USB drive. The BIOS recognizes everything. However, when I got to the disk partition utility, Anaconda could never detect one of the SATA devices. I tried swapping cables, ports, etc. No luck. Today, I ran across this Bug thread: [URL] I checked the screens Ctrl-Alt-F1-6. Nothing obvious. But, for fun (from the bug thread) I went to the prompt on 2 and ran:
dmraid -r -E It found an "nvidia" RAID "thingy". Forgive my ignorance on what it really is called or what it does. Anyway, I answered yes to erase the "thingy" and voila. I was able to install F11. Not sure if I made a good title, but I've seen bits and pieces of people having similar problems with F11. And BTW, the drive that had "nvidia" on it was from a machine that was using nvidia hardware RAID 0 - but F10 had no problems with it.
I've been running F10 with a four disk RAID5 setup that has been working fine, however when I tried to do a fresh install of F11 I can't get past the "Select Country" and "Select Keyboard" screen of the GUI as a message will say "Detecting Storage Devices" and then throw up an error. I can't give you the full error, because when I click Save The Detecting Storage Devices box appears and I can not select anything under it or enter my Bugzilla account.However, when I plug just the hard drive that has XP on it then the installer continues swimmingly.I've backed up everything, so if I have to I could zero out the drives however they're all rather large so it'd take an inordinate amount of time.
View 2 Replies View RelatedI'm using fedora 11. I'd like to do some tests with direct IO (raw) devices. I have now raw(1) command. Yum fails to find a package providing raw. There's a /dev/rawctl and raw appears in /proc/devices. Where is it? (rpm?)
View 3 Replies View RelatedI am running federa 12 and just recently installed virtual Machine Manager. I've created Virtual machine and installed Windows XP on it. Everything is running OK, as far as I can see. I've installed software to manage and download pictures from Cannon camera, but I am not able to make USB port available to this Virtual machine. I tried to add hardware in VM, but not sure if I should go for STORAGE option, or PHYSICAL HOST DEVICE. I tried second option, and selected USB device. Now I've got UB hub available, but still cannot see anything attached to it (camera in my case, or USB stick with pictures).
View 8 Replies View Related