Fedora :: Printer Queue Shows Stopped Status For Job Running F14
Jun 15, 2011
My elderly HP Laserjet 4P has worked well for over 15 years. I have it connected to the home network via a Trendnet TE100-P21 Print Server, and setup has always been straightforward and easy. The whole setup has worked quite well with Fedora 9 or 10 thru 14, but then stopped working within the last couple of weeks. I'm assuming an update broke something, as I can find no other reason. When I send a print job or test page, I get a Print Error dialog. The print que shows a "stopped" status for the job. In the Error dialog I use the Diagnose button and step through until I get the Status Messages dialog, which informs me: "The printer's state message is: 'Data file sent successfully'".
Then I enable debugging and send a test page. Stepping through the dialogs it tells me it cannot detect a problem, and gives me an error log, which I've attached. The Trendnet server has a web admin interface. In that interface I can send a test page successfully. Also, I can open a VirtualBox (Windows XP) in Fedora 14, and successfully print from it. My print setup in Fedora is the same as it has been for several years now, and nothing has changed on that end. I have rebooted Fedora and the Trendnet server. All other computers/OS's on the network have no problem printing, only this Fedora 14, and only recently.
View 1 Replies
ADVERTISEMENT
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
View Related
Nov 15, 2010
I can print very well over a USB cable, however I'm having trouble printing over the Internet (F13). The errors that I get are:
job-printer-state-message Unable to get printer status (Not Implemented!)
job-printer-state-reasons [u'none']
Printer status usually shows up as OK until I actually start to print and then I end up with an error message and nothing prints. This seems to show up with any type of printer connected to the internet.
View 1 Replies
View Related
Jan 18, 2010
I'm having a problem trying to set up my HP OfficeJet 6310 printer with Fedora 12. This is with a clean install, SELinux disabled and Seems to be some issue specific to Fedora, as I've used the same setup with the same hardware without problems in other distributions. I have installed all the HP files I believe should be installed. Anyway, my printer is on my wireless network. I can see the printer on the network, as is the case with my other computers.
I followed the standard setup I use with any other distro....open a terminal and enter "hp-setup." The HP Setup utility opens and I go through the standard procedure of choosing /Network/Ethernet" as my means of connecting. Moving on, the HP OfficeJet 6310 is found without a problem. When I attempt to "Add Printer," however, I am then getting an error. The error shows, "Printer Queue Setup Failed. Restart CUPS and try again." Looking at [URL], I get to CUPS but can get nothing there so far as a printer goes.
View 14 Replies
View Related
Mar 16, 2011
I have an HP printer for my Lenny which has worked for some year. But I don't remember what method I used to install it. So this is one piece of the puzzle that I can't see. But like I said the printer works. One day I accidentally printed more than I had papers in the printer-machine. Then I kind of stacked a lot of print jobs in the queue out of frustration. So whenever I reboot the PC/Lenny then it waste some paper by printing things that got stuck in the printer queue. It's not very environmental this weird behavior.
So next time this happens how do I flush the Printer queue so Lenny doesn't remember what happened before the reboot? I followed these instructions earlier but it only switched one weird behavior with another weird behavior. So it didn't work for my Lenny, and I couldn't find any better solutions on the Internet. [URL]...
View 3 Replies
View Related
Jun 11, 2011
What is the proper way to make the smb and nmb services start (and keep running) automatically? I have successfully configured samba on my F15 box, but sometimes the other boxes cant see it. I check the status of smb and nmb and smb is running and active, but nmb status is "Running (exited)". If I manually restart nmb then nmb status changes to "Running (active)" and the problem goes away. However I want it to start (and keep running) automatically as it should. I am thinking maybe the problem is the way I set smb and nmb to start automatically.
I used
$chkconfig smb on
and
$chkconfig nmb on
Is this the correct way? if not, what is it? Maybe I need to be more specific about at which runlevels I want the services to start? I have googled, but found about 5 diferent methods to make this services start automatically, some with systemctrl, some editing files, chkconfig, and even the system-config-services app (which seems broken in f15 btw) and don't know which one to use.
View 9 Replies
View Related
Jul 17, 2011
I bought my HP P1102w printer specifically because it works in Linux, and it did in Fedora 14 after installing the hplip from HP, not the repository.
After upgrading to F15, the printer was no longer there. /var/log/messages saw the printer, but claimed "io/hpmud/model.c 625: unable to find [hp_laserjet_professional_p1102w] support-type in /usr/share/hplip/data/models/models.dat", which is strange because I found that exact line in that file.
Anyway, I downloaded hplip from [URL] and installed it.
Plugging in the USB cable now looks good:
Code:
Jul 16 17:33:31 goldfinch kernel: [ 7410.596258] usb 1-5.3.2: new high speed USB device using ehci_hcd and address 9
Jul 16 17:33:31 goldfinch kernel: [ 7410.681937] usb 1-5.3.2: New USB device found, idVendor=03f0, idProduct=032a
Jul 16 17:33:31 goldfinch kernel: [ 7410.681942] usb 1-5.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Code]...
I then tried system-config-printer and it detected the printer on the wireless network. (I really needed to print something, so I had set it up in a Windows XP virtual machine.) So now I have the printer displayed as a network printer, but it still can't print anything. The test page diagnostics spits out the attached debug log. The only thing that stands out to me is the error claiming that my HP printer isn't an HP.
View 1 Replies
View Related
Mar 21, 2009
As you know some(?) new computers have no built-in parallel port. The one I built didn't have one anyway so I bought a PCI-express card with a port, a cheap one with a printer port, nothing more.OpenSUSE 11.1 sees the card somehow and "lspci" says it's aCode:Parallel controller: Oxford Semiconductor Ltd Device c110"hwinfo --printer" does not see it at all, whatever that may mean?I have connected my old inkjet to it and configured the queue same way it used to be on the old computer but nothing ever comes out on the printer. Maybe the fact that I'm running openSUSE 64-bit has something to do with it, wrong drivers or some such?
View 9 Replies
View Related
Aug 27, 2010
I am printing from an Acer to an HP. I can't completely delete the queue and now can't print anything.
View 4 Replies
View Related
Aug 22, 2010
my ERP is sending multiple xml files to my queue and printing daemon reads each files and send it to windows printer (queue) where another software that uses each file and prints one document at a time.I would like to control first part when ERP send XML file I would like printing daemon to send files to windows queue in order the files came in from ERP. Currently it send it in random order. (i think it's based on how fast it can process, size of file..ect)
View 5 Replies
View Related
Sep 9, 2011
I am running Fedora 15 but about 1 week ago my Hp laserjet 1220 all-in-one printer stopped functioning. The OS recognizes the HP printer, but I cannot print any print job whatsoever. I have looked through the faq section and found no resolution for my conflict or problem. I have used Fedora on this system since Fedora 8.
View 1 Replies
View Related
Jul 31, 2010
I just installed opensuse 11.3 and was configuring the printer (via http) as usually using the HP Device Manager. But this time I got these error message:Printer queue setup failed. Please restart CUPS and try again
These lines were generated in the error-log of cups:
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Bad driver information file "/usr/share/cups/drv/sample.drv"!
E [31/Jul/2010:23:30:35 +0200] [cups-driverd] Skipping "/usr/share/ppd": loop detected!
[code]....
View 9 Replies
View Related
Jun 10, 2010
My Printer Brother DCP-8045D only prints, when I send the computer (Lenovo X200) to suspend (or shutdown) and wake it up again, whilst a document is in the printer queue.
View 2 Replies
View Related
Aug 10, 2010
I'm using Ubuntu 10.04, and I have an HP D1660 printer. The printer has already been added, and HPLIP is installed. I can't get anything to actually come out of the printer, even though I can send a job to the printer. Does this have anything to do with CUPS?
Here are some of the last error log messages after using the printer troubleshooter (I only included some because it's a long list):
View 1 Replies
View Related
Jun 12, 2011
Can I only modify /etc/cups/printers.conf the printer queue name ? for example
<Printer stateme>
Info Created by redhat-config-printer 0.6.x
Location Stateme printer
DeviceURI lpd://nt/stateme
State Idle
Accepting Yes
JobSheets none none
QuotaPeriod 0
PageLimit 0
KLimit 0
</Printer>
can I only modify lpd://nt/stateme to lpd://printerserver/stateme? and i don't need to modify another files?
View 1 Replies
View Related
Dec 7, 2009
When I did update a few minutes back, it showed me the following messages
Quote:
/boot/initramfs-2.6.31.5-127.fc12.i686.PAE.img: contents have been changed
/lib/modules/2.6.31.5-127.fc12.i686.PAE/kernel/drivers/gpu/drm/nouveau/nouveau.ko: No such file or directory
[code]...
I've not changed contents of any of these. Then why does it show me this messages? I did install akmod for my Nvidia graphics card for which I followed the steps mentioned for nouveau.
View 6 Replies
View Related
Jan 14, 2011
When I opened Quicken this morning I saw that WINE did some kind of update; now Quicken cannot open files. The program seems to start normally but when I try to open a file it locks up. I see that Freecell runs normally but of course it doesn't access any data files.
View 9 Replies
View Related
Aug 1, 2010
I want to add my printer to ubuntu 10.04. When I run the system-config-printer (System->Administration->Printing) I can't choose the "Add" in the menu bar (ctrl+n does not work either).
View 3 Replies
View Related
Mar 27, 2011
Since I changed my System from openSUSE 11.3 x86_64 to openSUSE 11.4 x86_64 my printer (Samsung ML-2850 via USB) seizes to function (clean installation). The printer connects to two machines via a KVM-switch. On the other machine (Windows 7 x64/Windows XP x64) the printer is working fine. This did not change when I switched the Cables/KVM-ports. In addition, when I was using openSUSE 11.3 x86_64 the printer also worked fine. All necessary CUPS-packages are installed:
[code]...
View 6 Replies
View Related
Dec 13, 2009
I installed SuSE 11.2 64-bit on a new computer without any printer attached. When I read the manual for the mainboard, I discovered to my delight that it actually has a parallel port, it's just not connected. I moved the cable from an old desktop and put it into my new desktop. After enabling the port in the BIOS setup, the Hardware Information dialog in yast correctly shows that I have a HP LaserJet 1100 (/dev/lp2).
How do I configure the printer? "Printer" in yast tells me "There is no print queue". When I click "Add" yast tries to detect a printer and gives up with the message "No connection selected". I can't add a selection, however. "More connections" gives me the exact same error message. The "Connection Wizard" allows me to select "Parallel Port", but then complains about missing connections again. The cups demon is running. I don't have /dev/lp2, is that the problem?
View 9 Replies
View Related
Oct 15, 2010
I'm using Debian squeeze and for an assignement, i have create 2 virtual pdf cups printers. Both are working very well. To test the different administion command; i try to disable one of the printer and move his queue file to the second one. I'm able to do it easily.
Now, i wish to write a bash script that wil test the status of the printer. So that,if the printer is disable, it just execute the "move" script. Is there a way to know the status of a cups printer and use that information in a script?
For example, a command/function that can return "O" is the cups printer is enable and "1" if not.
View 1 Replies
View Related
Oct 11, 2010
I have tries numerous methods to connect my laptop running Fedora 13 and my Netgear WGPS606 print server all without success. Has anyone made a successful connection and if so how? when running Windows 7 I have no trouble. Both Windows 7 and Fedora connect to the internet without a problem.
View 1 Replies
View Related
Nov 3, 2010
is it possible to get the length or even the items of both queues, the run queue and the swap queue? I've googled a lot but had no luck. Maybe I havn't used the correct search words...
Is there any header and/or code example to use structures or any API to get these information from the kernel or the scheduler?
View 1 Replies
View Related
Nov 11, 2010
After it tries to print and nothing happens this shows up stopped. Idle- /usr/lib/cups/filter/footmatic-rip failed.
View 2 Replies
View Related
Jan 31, 2010
I have Ubuntu 9.10 installed and up to date.
I have an HP Laserjet 2200 connected via USB with 64MB of memory. When I print page 2 of this document (for example) [URL] the delta-symbol and minus-signs do not show up, although I see them in Adobe reader version 9.3.
I have tried several of the available drivers for the printer (including the "[recommended]" one) and none of them produce these symbols.
I'm guessing this is a font issue. I don't know how to show you what font stuff I have installed.
[Code].....
View 4 Replies
View Related
Dec 8, 2009
I have a Canon Pixma iP4000. It worked in 11.1, and worked until recently in 11.2. But now it does not work. When I try to print anything with it I get the error:
"Unable to find Gutenprint driver named "Canon PIXMA iP4000"!"
I have tried deleting the printer and setting it up several times in both the YaST printer module and http://localhost:631/. Nothing changes. I am using the driver it suggests and the driver definitely exists. I have tried reinstalling all of my cups and gutenprint-related software as well. I am using an up-to-date x86-64 system.
View 5 Replies
View Related
Nov 4, 2010
Trying to figure out why my printer stopped working. I thought it might be a usb problem, but when I moved it to another machine and reinstalled, I have the same problem. I can configure the printer and queue up jobs. I see cups starting gs, but nothing going to the printer. I've installed the latest packages from hp. Used to work.
View 2 Replies
View Related
Dec 12, 2009
I was always able to print with my HP OfficeJet 700 printer in Linux, but all of a sudden when I need to print something important, it doesn't work?! It says the print job stopped. It only printed 1/4 of 1/4 of what I needed to print. It has the correct print settings, etc... but I can't print?! Please help. It was able to print the test page before, but now even that won't print. Even CUPS is having problems connecting to the server. Printing in Windows has the same problem.
View 14 Replies
View Related
Apr 4, 2010
I am running Fedora 11 and recently, it has been taking longer and longer to boot up. The Fedora 11 Status bar creeps along ever so slowly till eventually I will receive a login screen. I timed it at about 3 - 5 minutes from turning on the computer till I get a log in prompt.
View 6 Replies
View Related
Mar 6, 2010
My printer no longer prints anything with exception to the TestPrint page.Any other job I give it, it says is "completed" in the queue, though nothing has printed. Installed cups again, after a complete removal. No change. Heres what troubleshooting gave me:
Code:
D [06/Mar/2010:07:26:01 -0500] cupsdSetBusyState: Dirty files
D [06/Mar/2010:07:26:01 -0500] cupsdReadClient: 12 POST / HTTP/1.1
[code]....
View 2 Replies
View Related
