after my update to 11.4, I am having trouble with my printer.
hplip is installed (3.11.5), but it does not start the printer queue. If I click to start the queue, it seems to start, but no printing jobs are sent to the printer.
opening the hplip gui spits out an error message: device communication error 5012
I can't make work my HP LaserJet P1006 printer on USB with OpenSUSE.
It's being detected as usb://HP/LaserJet P1006 but there is no specific driver for it. I try to use the generic HP LaserJet driver but didn't work. There is no driver for P1005 model, either.
Someone had the same problem here: Cups Printer Driver Incompatibility Hp Laserjet P1006 Printer
Whenever I send a document to print on my USB Printer, as mentioned in title, it just sits and waits and after a minute or so the hp-toolbox resturns this error.
Status: Printer queue stopped Code: 700
Status: Device Communication Error Code: 5012
I know my printer is OK since I print with it on my Windows machine.
I've been banging my head for two days now trying to get my HP Laserjet 1020 to work. I've gotten the drivers working on the box itself (Opensuse 11.3 x64), but I couldn't get it to print from my laptop (Ubuntu Lucid). Ideally, I'd like to end up with a functional printer which can be used either from the desktop machine (Opensuse) or from the laptop (Ubuntu) through NFS.
After so many attempts at fixing it, I've not made it such that I can't print at all, from either system. I'm considering re-installing Opensuse (or just going back to Kubuntu, which recognizes the printer without a hitch). But before I do so, I figured I'd ask here.
Here are my issues, and attempts at solution:
1) I tried adding the printer both through CUPS, through YAST and through hp-setup, using the hpijs driver. Each time the printer is recognized, but a test page won't print.
2) I tried building the foo2zjs driver, as outlined here: HowTo Install a HP LaserJet 1020 printer in Suse 10.x, 11.x It came up with dependency problems repeatedly on the last step (sudo make install-hotplug) . I gave up when it told me that it was conflicting with an installed package (system-config-printer-udev) which was not installed.
3) Perhaps related problem: on the CUPS web interface, I get a "forbidden" message when I try to change the options on the CUPS server to allow remote access.
Note that:
a) I've already added myself to the lp group.
b) I changed the permissions (+rx) on the /dev/lp0 to allow myself access
c) I'm able to get to the CUPS page on the client machine, so the port 631 (I think) must be open. I say "I think," because there's no option to allow CUPS in YAST firewall settings, for some reason.
I've been following guides here and there, but I'm afraid that I've borked my cupsd.conf file through all the edits. Here it is:
Code:
I have a Windows print server (Win XP SP2) and a 1 opensuse client. I have setup cups as per the following document:
Printer Sharing: Windows Print Server for Suse/openSUSE Linux Clients [Samba and LPD]
I am not using Samba. The setup went fine, but I am not able to print to it. There are other clients (all Windows) that are printing fine to this print server. The following is what I see in the /var/log/cups/error_log:
[Job 3] recoverable: Unable to connect to printer; will retry in 30 seconds...
I am using DHCP in this LAN. Ping is working fine (client's hosts file updated with the print server's ip address.). This looks like a networking issue.
I am running F15 Beta i686 (Gnome3) Desktop on a dual-core, 4 Mb DDR2 system. I already installed hplip and hpijs drivers and connected HP LaserJet 5MP printer to the parallel port of my PC. Set up was by running "system-config-printer", adding device URI=parallel:/dev/lp0, and selecting approriate driver (CUPS+Gutenprint (en) for the printer. However, when I chose to print a test page, nothing came out and the printer window says the printer is not connected. This is even though I can print from Fedora14 installed on the same PC.
View 2 Replies View RelatedI have been given a HP laserjet 1320 printer. how to make it work?
View 9 Replies View Relatedhow to install my hp laserjet 1010 printer on red hat el5.when i connect my printer, a new window pops up detecting a new hardware but my printer's name or the driver is not listed. i have the printer's driver cd which is for windows.
View 7 Replies View Relatedi recently installed fedora 14 xfce and i have a printer laserjet p1007 hp connected. the printer gets detected but there is an error while installation (i.e when i run hp-setup) it gives an error that some binary drivers missing. i refreshed the package list also. but still the driver does not get installed..
View 1 Replies View RelatedHow to find printer drivers for the following printers
HP Laserjet 1020
Cannon iP1900
i used ubuntu maybe for a year but i dislike unity and i installed gnome 3 via ppa but it wasn't so stable.now i installed fedora on my netbook and really like!Gnome 3 is very stable but i have a problem with my printer.Fedora notices it plugged in my printer HP Laserjet p1005 but it doesn't find any drivers.
View 1 Replies View RelatedI am running Fedora 15 but about 1 week ago my Hp laserjet 1220 all-in-one printer stopped functioning. The OS recognizes the HP printer, but I cannot print any print job whatsoever. I have looked through the faq section and found no resolution for my conflict or problem. I have used Fedora on this system since Fedora 8.
View 1 Replies View RelatedMy printer had been working in 10.04 for a couple months. It still does work when I boot from a 9.04 live CD, so I know it really is "connected" hardware-wise.
View 8 Replies View RelatedI have installed an HP LaserJet 4250 using the hp 4250 postscript driver. The printing works but when I click on File->Print on any application (Open Office or Document Viewer), the message "Getting printer information" is beside the printer name and the print button is disabled. After 5 or so seconds, the print button becomes enabled and I can print. This happens every time but did not when I first installed the printer. I would prefer to determine the cause rather than delete and re-install the printer.
View 7 Replies View RelatedProblems with canon ip4000 printer upgrade to opensuse 11.4 led to a printer problem: only the 1 page of a printing job is o.k. but the following pages are not to obtain.
View 1 Replies View Relatedyesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups:
Description:OpenBlackBox v mojom rume
Location:Moj rum
Driver:Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection:usb://Samsung/ML-1640%20Series
Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
I am using Opensuse 11.2 on my work machine and am generally quite happy with it. When I plugged the HP Laserjet 1020 into the USB port after installing Opensuse a few months ago, it recognized it immediately and installed the recommended driver. Everything worked fine and I could use it for quite a while.
Now, however, although I do not remember changing anything, the printer is causing trouble. After I couldn't print at all, I removed the driver and tried to install it again. Despite the printer correctly showing up with "lsusb", the printer configuration in YAST does not see any printers at all anymore. And, more strangely, when I plug in the printer cable first and the (USB-) mouse cable second, the mouse does not turn on anymore (no cursor movement, no light in the mouse). The same happens when I boot the computer with the printer cable in the USB port.
I am trying to print a schematic from KPDF (Suse 11.2) onto an 11x17 sheet of paper. Regardless of the printer settings I use or which driver I choose it won't rotate the image and fill the page. I have the same problem with kiCAD. If I use Okular it prints part of the drawing in one corner at the 8.5x11 scale.
View 3 Replies View RelatedI have newly installed opensuse 11.4 x85_68 on my computer. Yast2 refuses to see my connected HP Laserjet 4l on parallel port, I can install a second network printer but neither hplip nor yast2 can start printer configuration. The printer is present in Yast2 hardware List under /dev/lp1
View 8 Replies View RelatedI am unable to add my USB printer via the YaST2 Printer Configuration setup tool in openSUSE 11.3. The printer, a Dell Color Laser 1320c, was last used with openSUSE 11.2, and setup was entirely uneventful. No driver is provided by Dell, so I used the Fuji Xerox DocuPrint C525A Linux driver. The problem: To add a print queue in 11.3, a Connection must be specified (parallel, USB, network, etc). However, the configuration wizard fails to show the presence of the USB print device.
[Code]...
This printer was working just eight weeks ago under 11.2, and 11.3 is obviously able to detect its presence and identify it correctly. I feel certain the solution is simple, but I haven't found documentation that provides the answer.
I am unable to connect to my printer wirelessly. I get this: Idle - "Connecting to printer..." The computer never connects. I can print a configuration report and get the ip address. If I type that in a webrowser, I get an error: unable to connect. Even if I plug the printer into the computer by a usb, I am unable to access the printer's ip address in the webrowser. I'm not sure how to proceed on getting the printer working wirelessly. It is a hp 6940 I use the HP Deskjet 6940 Series hpijs, 3.10.2rc1.9 driver. I have only recently been having printer problems. The printer has been hooked up on the same network for years. It still prints via usb.
View 5 Replies View Related(due to a problem with the previous post title I'm forced to issue a new post).I'm helping a friend of mine to move to opensuse from windows. All gone fine except the HP laserjet M1120 MFP that it is recognised correctly by HPLIP but it doesn't print. Following the troubleshooting procedure I got the following messages:
Code:
'D [23/Dec/2010:17:34:24 +0100] [Job 3] STATE: +hplip.plugin-error',
'D [23/Dec/2010:17:34:24 +0100] cupsdMarkDirty(P-----)',
'D [23/Dec/2010:17:34:24 +0100] [Job 3] prnt/hpcups/HPCupsFilter.cpp 413: m_Job initialization failed with error = 48STATE: +connecting-to-device',
code....
calling for an error of the hp-plugin "script?" due to compatibility with python3
(reference is made to a bug report in fedora url.
At the moment I have no access to the machine I need some advice, do you thing this could apply to opensuse too?
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies View RelatedI've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedI have a HP Officejet G85 and I just upgraded my system, which included the whole printer subsystem, and lost my printing. I have tried adding it via KDE's print dialog as well as directly via CUPS (localhost:631), to no avail.
I have searched all over the web for a couple of days, and can find similar stuff, but no resolution. I think it may be new (I just upgraded most of my system) in the latest releases of cups/hplip/.etc. Also, after the upgrade my hp-toolbox quit working, telling me I don't have qt4 installed, which I do.
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I installed printer drivers from a deb package and now I can't install/update anything!! I get this error:
jordan@jordan-desktop:~$ sudo apt-get install gtk-recordmydesktop
[sudo] password for jordan:
Sorry, try again.
[sudo] password for jordan:
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:
gtk-recordmydesktop: Depends: recordmydesktop (>= 0.3. but it is not going to be installed
pstocanonbj: Depends: libcupsys2 (>= 1.2.3)
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
Why is this 1 error tying up the entire install system?
I'm running Ubuntu 9.10. The Update Manager did an update to HPLIP, the Hewlett Packard Linux Internet Printing software, one or two days ago. When I went to print today, the HP Officejet 4500 printer showed up in Open Office when my mouse pointed to the printer icon. But, the printer wouldn't work. Then I noticed that the HPLIP Toolbox icon was moved from the Applications - Accessoires folder, to the System - Preferences folder. I reinstalled all the HPLIP software, using the Synaptic Package Manager. When I click on the HPLIP Toolbox & run the HP Device Manager, it says "No Installed HP Devices Found".I was a little surprised to see the software upgrade caused the HPLIP toolbox to move fromhe Applications folder to the System folder. Because of this, I suspect there may be a bug in the upgraded software? Is anyone else having this problem?
View 1 Replies View RelatedI have just upgraded my desktop to Fedora 14 from 12, I have been quite happily printing postscript documents via CUPS to an Epson CX9300F for ages. After the upgrade ( rather re-install as the boot partition wasn't big enough ) The documents come out looking like they were printed on an old Apple deskwriter, i.e. very pixel-lated.
I cannot seem to find what or where one has to tweak things to get it too work. I have tried both CX9300 drivers as supplied with the OS. I have tried system-config-printer and changed the resolution from auto to 370. So far no luck.