Red Hat / Fedora :: Keyboard Driver Missing Key Up Event?
May 26, 2010
$ cat /etc/redhat-release
CentOS release 5.4 (Final)
I've tried two copies of a: Microsoft Natural ergonomic Keyboard 4000 v1.0 Both fail. The result is my screen fills up with whatever key was missed. Re-pressing the key does no good. I have to unplug the keyboard and then plug it back in. So, I'm interested to know if this is a general problem or just my system. Meanwhile, I'm turning down the key repetition rate so it doesn't immediately fill my screen when it happens.....
View 3 Replies
ADVERTISEMENT
Jul 10, 2009
I've just changed from Fedora 8 to Fedora 10 and I'm having trouble installing a special alternative keyboard driver.
I used to be able to put the driver in the xkb/symbols directory, make entries for it in xkb/rules/base.xml and base.lst, and install with the System menu. Now I find that the Gnome tool no longer seems to be using the base files, and my driver doesn't show up.
Does anyone know where Gnome gets its list of drivers from? Alternatively, can I install it by editing a configuration file?
View 2 Replies
View Related
Jun 5, 2009
I need to find out the code where/how hid USB keyboard input redirected to stdout.
View 1 Replies
View Related
Apr 5, 2010
I updated my fedora 12 installation the other day, and have been working since then to try to get my computer back to working order. Here's what's up:
I ran a yum update and restarted the computer. When it booted back up I couldn't see anything but a black screen where there should've been a login screen. I can do terminal stuff if I hit ctrl+F2, so keep that in mind. I've determined that the problem is that kmod-nvidia-2.6.32.10-90.fc12.x86_64-195.36.15-1.fc12.1.x86_64 didn't get installed during the update process for some reason. I tried to yum install this file through my terminal access, but it didn't recognize any internet connection (neither wired nor wireless). I've downloaded the kmod-nvidia file to my Windows XP partition, and have also put it on my flash drive. So I need to know one of three things: How to access a Windows partition from terminal, how to access a flash drive from terminal, or how to connect to the internet from terminal so I can get the kmod file.
View 3 Replies
View Related
Jul 26, 2011
In korokaa15x64 I can't install a canon mp260 combi because no driver is available. where I can find a driver for this common combi type?
View 5 Replies
View Related
Nov 10, 2009
I get about enabling the NIC on my Asus P7P55D LE motherboard in Fedora 11. During the installation process of Fedora 11 it seems as if the network card was not installed. I cannot find any drivers on Asus support site for Linux/Fedora.
How do I get it to work?
View 6 Replies
View Related
Dec 28, 2009
After upgrading to 11.2, I get the following error when starting any xclient. Worse, its usually repeated a few times for each client.
Xlib: extension "Generic Event Extension" missing on display <my_ip>
I get this both when using Xming and nomachine.
View 2 Replies
View Related
Feb 11, 2010
With /usr/bin/canberra-gtk-play set to --id='desktop-login' in the startup Applications dialog one expects a sound to play at login. This is not the case with fedora 12. I set the variable to --file=/home/me/sounds/myloginsound and I got sound.
I'm curious as to why the event id failed. I suspect that id was not linked/associated with any sound before fedora 12 was released. How does one troubleshoot sound event ids and their associated sounds in f12.
I'd like to get audio when I log out as well. I recall seeing a dialog box with events and associated sounds in f11 (or was it f10?) .... I don't see it in f12
1. Does anyone know which package adds that functionality?
2. In the absence of a GUI approach, how can this be achieved (with the terminal)?
View 2 Replies
View Related
Apr 16, 2010
In window , I can catch all of systems event by window API, but in Linux,I don't know how to do it.
View 2 Replies
View Related
May 12, 2009
I am wondering, what is the status of Intel GMA X4500 driver on Fedora 10.
View 2 Replies
View Related
Jun 4, 2010
I was having a job in /etc/event.d. It was working fine upto FC12. With upgrade to Fedora 13, it stopped working . Searching the internet, It looks like /etc/event.d is obsolete and I need to use /etc/init. Also the filename has to have a '.conf' extension. So I have renamed my job as /etc/init/svscan.conf.However, it fails to start automatically on reboot . It works if I manually issue the command % sudo /sbin/initctl emit qmailstartBut fails to start automatically on reboot. Is there anything wrong in my script below ? Let me know if I have missed out anything?
% cat /etc/init/svscan.conf
# svscan - runlevel compatibility
# WARNING: This file was auto-generated. Do not edit!
[code]....
View 4 Replies
View Related
Jul 20, 2010
I am using fedora 9, with kernel version 2.6.25-14.fc9.i686. I installed rsh-server. My configurations (with firewalls off)were:
1. In /etc/xinetd.d/rsh made "disable = yes" to "disable = no"
2. In /etc/securetty included the lines rsh and rlogin
3. By switching to user 'user1', in /home/user1/.rhosts included ip address of remote machine and issued 'chmod 400 /home/user1/.rhosts'
4. restarted xinetd service
When I issue the following from remote machine rsh <ip address> -l user1 ls it fails saying 'Error sending audit event.' In 'tail -f /var/log/messages' I could see the error dump
socket bind: Invalid argument (errno = 22) Error sending audit event.
View 1 Replies
View Related
May 16, 2011
I just upgraded to 11.04 and i can't see all the tabs in keyboard settings like the options to configure the behaviour of the numeric keypad or the settings to move the mouse pointer with the numeric keypad.Now (in 11.04) i only see two tabs (General and Shortcuts) when before i could see: General, Layouts, Accesibility, Mouse Keys, Typing break. I need to access Layouts -> Options (as in ubuntu 10.10) but in ubuntu 11.04
View 3 Replies
View Related
Jul 30, 2009
I was using V9 and upgrade to V10 and now my logins in my inittab do not work. I realize that is file structure is outdated so I made individual run files for each of my serial devices under event.d ( such as TX0000 - rc....etc) - all this works but i need to manual type initctl start TX000o to get logon for my serial devices. I would so much like them to automatically start on bootup.
View 3 Replies
View Related
Jun 3, 2011
I've been using using Ubuntu and Arch with gnome for ages, but after the whole gnome3 and unity hubub, I decided to go with kde and openSUSE. and I'm completely loving it. However, I have one problem Ubuntu (gnome) has the option to choose the Faroese keyboard layout, but in openSUSE with kde, it's not an option. Now I really need to be able to write a lot, so I need the regular Faroese layout, otherwise I'm missing the letter "ð". openSUSE should really implement Faroese into the keyboard layout options
View 4 Replies
View Related
Jan 2, 2011
I use several keyboard layouts all the time. In all previous versions of Ubuntu I could see which one is current. After upgrade it is not showing anymore -- there is just an irrelevant picture. If I click on it -- I see current layout name -- but not other layouts. There I need to select "Keyboard Preferences" in order to see others. Because I often switch between layouts -- this simple feature is VERY important. Why it is broken in Ubuntu 10.10?
View 1 Replies
View Related
Mar 7, 2010
I'm a noob running Ubuntu 9.10 and am having difficulty getting my Ortek WKB-2000 wireless keyboard installed. I found a patch [URL] how to install it.
View 1 Replies
View Related
Oct 2, 2010
Does the Xorg driver used for the keyboard determine the keycodes in X11? the ones seen by xev? The reason I ask is xev used to report my F14 key as 183, now it is 192. I think this happened when i switched to evdev from kbd.
View 2 Replies
View Related
Apr 27, 2011
I've gone from 13.1 to 13.37, and hit this problem. The Irish (~=gb) is gone to US, and the bar along the side of the touchpad no longer works.
So I went to the Backup (Yes, stop laughing, I had a backup) and copied in /etc/hal/fdi/policy/* which had the files for sorting slackware-13.1, but _they_ did nothing after a reboot. I have
Code:
bash-4.1$ cat 10-keymap.fdi
<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.keys">
[Code]....
View 3 Replies
View Related
Oct 17, 2010
I recently upgraded (fresh installed) from OpenSUSE 10.3 to OpenSUSE 11.3. One thing I noticed missing was support for my Canon MP600 printer. Searching around, I found a solution on a Finnish OpenSUSE support page (which I translated with Google):
Canon MP600 ei asennu
Here's the fix:
1. Download file Linux_Print_Filterv270.tgz from Canon Print Filter for Linux (rpm)
2. Unpack with: tar xvzf Linux_Print_Filterv270.tgz (this also has support for other printers, including MP610, MP510, IP3300, and IP4300).
3. Install cnijfilter-common-2.70-2.src.rpm
4. Install cnijfilter-mp600-2.70-2.i386.rpm
This errors out with missing dependencies:
# rpm -Uvh cnijfilter-mp600-2.70-2.i386.rpm
error: Failed dependencies:
libgdk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libglib-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgmodule-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libgtk-1.2.so.0 is needed by cnijfilter-mp600-2.70-2.i386
libpng.so.3 is needed by cnijfilter-mp600-2.70-2.i386
libxml.so.1 is needed by cnijfilter-mp600-2.70-2.i386
5. I forced the installation using
zipper install cnijfilter-mp600-2.70-2.i386.rpm
Then select option "2" (break dependencies):
Solution 2: break cnijfilter-mp600 by ignoring some of its dependencies
Choose from above solutions by number or cancel [1/2/c] (c): 2
and it installs perfectly.
6. If you're using 64-bit openSUSE Linux (as I am), you need to copy the print filters:
mkdir -p /usr/lib64/cups/filter && cp -p /usr/lib/cups/filter/* /usr/lib64/cups/filter
7. Install the printer as usual.
I selected the MP610 CUPS+Gutenprintv5.2.4 simplified driver for my MP600 and printed a test page. The MP610 drivers work for MP600. There are about 4 of them, and I didn't try the others, but my guess is they will work also.
View 2 Replies
View Related
Feb 13, 2011
I have just reinstalled 10.10. I used the alternate version since I had to add a fake raid Windows install. Ubuntu is on a OCZ SSD (very nice )
Install went fine. Update went fine (a bit over 300MB of updates) and everything looked as it should.
Then I installed the restricted Nvidia drivers for my GTX275 card and then gnome suddenly looks like the attached screenshot. I have tried to change theme and the colour of the top bar changes but that is that. No icon changes etc.
I have updated to the latest 270.18 drivers but the problem is still the same.
View 4 Replies
View Related
May 17, 2011
my Ethernet card stopped responding a few days after installing Ralink Wireless Card Driver for Linux. I have tried installing the drivers from Realtek's site, but it fails. I also have tried reinstalling the network manager, and that still didn't help any. I have also tried looking online for any post or blog that could help, but that also turned up nothing. The Computer is a new 2010 / 2011 (bought it on new years eve) HP Pavilion desktop that came with windows preinstalled.
View 6 Replies
View Related
Feb 18, 2010
I want to install NV driver for my Geforce MX 440 on opensuse 11.0,but i got a error means miss modversions.h file in kernel source directory(I have install kernel source,gcc)after that i searched this file in my disk,and did not find it.
View 9 Replies
View Related
Aug 20, 2011
i would like to install the newest nvidia driver NVIDIA-Linux-x86-280.13 on my Suse 11.1 with kernel. kernel-pae-2.6.27.56-0.1.1
however the nvidia driver installer claims that kernel source and devel are missing and I don' know how to get and install them for this kernel.
View 1 Replies
View Related
Jun 8, 2010
I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is
Code:
sudo update-rc.d ccpd defaults 50
which gives me the error
Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.
I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.
View 2 Replies
View Related
Aug 6, 2010
Whenever I try to run a windows game under Wine I get an error that depict I have no proper sound driver. I checked the wine config and there was only OSS option that I think it would not help me to get sound working. I think I have to use Alsa Instead but I don't know how to add Alsa support to wine. By the way in need DirectSound as well. should i download it myself and add it to system32 or there is a better way?
I use:
ubuntu (Meerkat) 10.10
wine 1.2
View 1 Replies
View Related
Sep 15, 2010
I've never had any problems before,but I just did a fresh install of 10.04.1 on a brand new drive yesterday. I noticed this morning that I have no sound drivers(under the hardware tab of sound preferences, there is nothing listed). I found a thread that had this line to run:
Code:
cat /proc/asound/card0/codec#* | grep Codec
And I got:
Code:
Codec: Realtek ALC888
Not sure what to do now though.
View 1 Replies
View Related
Feb 24, 2010
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies
View Related
Mar 1, 2010
I tried to find my solution for hours now but no luck. I'm a medical student and the other day I finally found the time to set up ubuntu for my first time. Everything was working great and I had wireless up and running. However, I tried to set up tethering to my iphone and after that my wireless hasn't been working (I've noticed no other problems). [URL]..Then I used this tutorial [URL].. However, after doing these steps the computer needed to reboot (I actually forget exactly where but I had to reboot in the middle of the second tutorial). After my computer restarted my wireless no longer showed up. By this I mean that wireless network no longer even showed up as an option when I left clicked then connections. However, I did not lose the wireless profile under network connections. So I went to system and noticed that the Broadcom STA driver was no longer active. So I tried to activate again and received this message.
[Code]...
View 2 Replies
View Related
Apr 1, 2011
I am trying to install a HP deskjet 1000-J110a. I downloaded a driver package thing, and I guess I unpacked it, and I made it, and I thought I installed it. I am totally confused and my brain hurts. The printing troubleshooter is telling me: Missing Printer Driver
Printer 'Deskjet-1000-J110-series' requires the 'foomatic-rip-hplip' program but it is not currently installed. I found something that is the 'foomatic-rip-hplip', but what the heck do I do with it?
View 9 Replies
View Related
