OpenSUSE Install :: Root Fs Mounts R/o After Update To 11.2 - FATAL: Module Jbd Not Found

Dec 13, 2009

I've updated my openSUSE 11.1 to 11.2 using installation DVD. After that, as system boots, I started to get lines like:

Code: FATAL: Module jbd not found
FATAL: Module mbcache not found
FATAL: Module ext3 not found and so on with different modules.. and this exact string several times:

Code: WARNING: All config file need .conf: /etc/modprobe.d/tv, it will be ignored in a future release. Finally I get:

[Code]....

View 4 Replies


ADVERTISEMENT

OpenSUSE Install :: Fatal - MBcache And Ahci Module Not Found

Nov 30, 2009

I am using openSuSE 11.2 on a VGN-AR41L. I have also erased the preinstalled Home Vista (what a pleasure). Now to my problem. My system boots correctly but if I press the <ESC> key while booting I can see the following messages:

"Doing fast boot
FATAL: mbcache module not found
FATAL: ahci module not found
"
and the boot process continues normally.

Why this happens? Does this mean that I have a problem that I haven't discovered yet? Is it something that I can ignore? I am using SUSE Linux from version SUSE Linux 8 personal and although I am not a power user I have done my two desertions on this system and I am very happy with SUSE. I have bought SUSE Linux 8 Personal and SUSE Linux 10 all the other versions until today have been downloaded.

View 6 Replies View Related

OpenSUSE Install :: VMtoolsd Fatal - Module Vmmemctl Not Found?

Feb 8, 2011

vmtoolsd FATAL: Module vmmemctl not found.
What does this mean and should I activate/deactivate anything in the system or is this no problem.

View 8 Replies View Related

OpenSUSE Install :: Booting With Bootsplash Turned Off / Sending Error FATAL: Module Ata_piix Not Found?

Dec 20, 2009

while booting with bootsplash turned off there's a message "FATAL: Module ata_piix not found FATAL: Error running install command for ata_piix" .Though everything works fine i'd like to know what does this message mean and is there a way to disable loading of ata_piix whatever it means.

View 2 Replies View Related

OpenSUSE Hardware :: ATI Catalyst 10.7 On 11.3 64bit - Starting Vmtoolsd FATAL : Module Vmmemctl Not Found

Jul 26, 2010

I downloaded the new Catalyst Package from ATI [URL] and I don't know what happened. Installed fine restarted. It starts loading fine then screen flickers like crazy Gnome Desktop won't load. Kicks me over to console type log in. Starting vmtoolsd FATAL : Module vmmemctl not found. gdm[1586]: WARNING: GdmDisplay : display lasted 2.12 seconds Gdm[1586]: WARNING: GdmLocalDisplayFactory: maxium number of X display failures reached: check x server log for errors. I type StartX and is states (ee) fglrx(0): iregl_setsuspendresumestate FAILED -9. Is it going to happen with every computer running 11.3?

View 9 Replies View Related

Debian :: FATAL: Module Fbcon Not Found

May 17, 2011

I'm trying to create an xorg.conf file. I've used Xorg :1 -configure and Xorg -configure in the console but i keep on getting the same error message.

FATAL: Module fbcon not found. Number of created screens does not match the number of detected devices. Configuration failed.

View 7 Replies View Related

Fedora :: Fatal Module Microcode Not Found

Dec 14, 2009

On startup I get the following message:
Code:
Applying Intel CPU microcode update: FATAL: Module microcode not found. OK
ERROR: Module microcode does not exist in /proc/modules
Selfmade Kernel:

Code:
[toby@sarah ~]$ cd /usr/src/kernels/linux
[toby@sarah linux]$ cat .config | grep -i microcode
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y

Code:
[toby@sarah linux]$ rpm -qa | grep -i microcode
microcode_ctl-1.17-1.53.fc12.1.x86_64
I found few links, saying that this is a Xen problem but I have no Xen.

View 3 Replies View Related

Ubuntu :: FATAL: Module Fuse Not Found.

Mar 5, 2010

I installed FUSE using fuse-2.7.4.tar.gz; but now, when I type 'modprobe fuse' in a terminal, it gives me: FATAL: Module fuse not found.

View 4 Replies View Related

Hardware :: FATAL: Module Snd_card_intel8x0 Not Found

Jan 15, 2010

modprobe snd-card-intel8x0

And this give me result as

FATAL: Module snd_card_intel8x0 not found.

View 2 Replies View Related

Hardware :: Fatal - Module Pciehp Not Found

Aug 14, 2010

This is the error I am getting:
bert@mybook:~$ modprobe pciehp
WARNING: /etc/modprobe.d/options.conf line 3: ignoring bad line starting with 'ProblemType:'
WARNING: /etc/modprobe.d/options.conf line 4: ignoring bad line starting with 'Architecture:'
WARNING: /etc/modprobe.d/options.conf line 5: ignoring bad line starting with 'DistroRelease:'
WARNING: /etc/modprobe.d/options.conf line 6: ignoring bad line starting with 'Package:'
WARNING: /etc/modprobe.d/options.conf line 7: ignoring bad line starting with 'ProcCmdLine:'
WARNING: /etc/modprobe.d/options.conf line 8: ignoring bad line starting with 'ProcEnviron:'
WARNING: /etc/modprobe.d/options.conf line 9: ignoring bad line starting with 'SHELL=/bin/bash'
WARNING: /etc/modprobe.d/options.conf line 10: ignoring bad line starting with 'LANG=it_IT.UTF-8'
WARNING: /etc/modprobe.d/options.conf line 11: ignoring bad line starting with 'ProcVersionSignature:'
WARNING: /etc/modprobe.d/options.conf line 12: ignoring bad line starting with 'SourcePackage:'
FATAL: Module pciehp not found.
bert@mybook:~$

I am trying to make my card reader hot pluggable
this lspci
bert@mybook:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) .....
I am running ubuntu netbook remix on an acer aspire 532h.

View 1 Replies View Related

General :: FATAL Module Nvidia Not Found

Aug 13, 2010

I made some progress trying to get a host that has an Nvidia GeForce 6150 LE and running a liveCD version of Xubuntu 9.10... but "modprobe -i nvidia" returns "FATAL: Module nvidia not found."

View 5 Replies View Related

Software :: FATAL Module Ndiswrapper Not Found

Mar 2, 2010

Ok, I just upgraded from Slackware 13.0 to Slackware-current and now when I run modprobe ndiswrapper I get the following error.FATAL: Module ndiswrapper not found.Im not sure what happened on this. I did a search in google and couldn't find anything useful any help would be appreciated.

View 14 Replies View Related

Fedora :: Fatal - Module Ndiswrapper Not Found (Need USBcore)

Nov 8, 2009

I'm trying to configure ndiswrapper but when I run
Code:
modprobe ndiswrapper
it says

Code:
FATAL: Module ndiswrapper not found.
I know it needs usbcore so I run

Code:
modinfo usbcore
modinfo: could not find module usbcore
So How should I get usbcore working?

View 6 Replies View Related

Ubuntu :: Installing - FATAL: Module Powernow_k7 Not Found

May 15, 2010

I want to activate cpu frequency scaling on my home computer. I have an athlon 64 3200+. I know that it supports frequency scaling, because when I got the processor I also got a CD with the Cool n'Quiet driver. I've tried with the powernowd service, but when I try to start it I get Code: * Starting powernowd... * CPU frequency scaling not supported...

and if I try to start cpufreqd I get Code: No cpufreq interface found, not starting cpufreqd In the meanwhile I've noticed that I also don't have powernow-k7 kernel module installed. If I try a modprobe powernow-k7 I get: Code: FATAL: Module powernow_k7 not found I have no ideea where I can get this kernel module.

View 1 Replies View Related

Red Hat / Fedora :: Adding Ntfs Module - FATAL: Module Ntfs Is Not Found

Jun 8, 2011

I am using Redhat linux 5 version 2.6.18-164.e15 with platform i686. I need to add ntfs module. I execute following command

#modprobe ntfs

but it say FATAL: Module ntfs is not found.

View 1 Replies View Related

OpenSUSE Install :: Invalid Module Format - FATAL: Error Inserting P4_clockmod

Jan 10, 2010

I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.

View 9 Replies View Related

Debian Multimedia :: X Server Bailing - Fatal Module Fbcon Not Found

Jan 31, 2010

Boot up with 2.6.32 kernel. Get to login screen, X attempts to start and fails. I log in, execute startx and succeed. Yesterday, could not boot up at all with .30 kernel. Upgraded to .32, so partially fixed. Yesterday also un-installed Synaptics package, as do not have touch-pad on this machine (Thinkpad X40)

This from kdm.log:
X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian .....

View 3 Replies View Related

OpenSUSE Install :: 11.4 Upgrade - Fatal Server Error, No Screens Found?

Oct 27, 2010

I have just upgraded from 11.1 to 11.4. When I boot up, I get a command line, but when I do 'startx', I get 'Fatal server error: no screens found'. I have been looking for a solution and tried 'Xorg -configure' but this gives:

Code:
Failed to load /usr/lib/xorg/modules/drivers/vboxvideo_drv.so: undefined symbol: resVgaShared

[code]....

View 6 Replies View Related

OpenSUSE Install :: While Checking Xorg.0.log Found I810 Module Is Failed To Load?

Dec 15, 2010

I have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?

View 9 Replies View Related

OpenSUSE Install :: /.kde4, /lost+found And Others In Root Directory?

Feb 16, 2011

maybe everything changed while i was stuck in 10.3 but i noticed soonafter install, and am just getting around to asking:i find these directories in the system's root directory very surprising:

/.config (with one file inside Trolltech.conf, which is empty)
/.kde4
/.kde4/share (empty)

[code]....

View 7 Replies View Related

OpenSUSE Install :: Apache2::Request Module - Error "No Targets Specified And No Makefile Found"

Jun 14, 2010

I'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8

[Code]...

View 2 Replies View Related

OpenSUSE Install :: Libzypp Not Found After Update

May 10, 2010

I tried tons of linux distros before i decided on openSuse as it was the first to work out of the box with all my hardware. Anyway, to my question/problem, i just run a system update which seemed to complete correctly, however, whenever i try and run the'Install Software' tool i'm given the following error:

libzypp.so.619=>not found
warning: the gtk frontend is installed but does not work
GTK GUI wanted but not found falling back to Qt.
Error while creating client module online_update_configuration

View 9 Replies View Related

OpenSUSE Install :: Module Apache2::Request To OS - Error "No Targets Specified And No Makefile Found - Stop"

Jun 19, 2010

I'm using openSUSE 11.1, KDE I'm trying to install the module Apache2::Request to my OS. After the gzip -dc libapreq2-2.12.tar.gz | tar -xof - I typed in Shell these (as shown in INSTALLATION document of module): perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs Then something goes wrong, make doesn't work saying: make: *** No targets specified and no makefile found. Stop..

I think the problem is in the command perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs in section .../path/to/apache2/bin/apxs . What does mean ./path/to/apache2/bin/apxs? Maybe I should write the path to apache2 which contains a file named apxs? I did not find such file apxs. My apache2 path is /etc/apache2, but there is no file named apxs... Result for perl Makefile.PL --with-apache2-apxs=/path/to/apache2/bin/apxs:

[Code]....

View 3 Replies View Related

OpenSUSE Install :: Error 15 - File Not Found After Update 11.3 On A Dual-boot PC With Ubuntu 9.10

Oct 22, 2010

Recently I've installed Open Suse 11.3 along with Ubuntu 9.10 on my PC ( made it a dual-boot OS ). This morning while logged in, in Open Suse 11.3, found out that there were important update for kernel in Yast. So, did the update and then required to restart the PC. In the Grub/boot menu, I chose to log-in to Open Suse 11.3, but after a while it returned with " Error 15, file not found ". Luckily I was able to log-in in Ubuntu 9.10. Assumed that Error 15 is always related to misplaced or wrong configuration of Grub in the partition, I did several searching via Google, and found this possible solution HowTo Boot into openSUSE when it won't Boot from the Grub Code on the Hard Drive . So I tried the " Broken Grub menu: boot to the menu, drop to a console and boot openSUSE direct " method. But rightly after the " find /boot/grub/menu.lst " command as instructed in the solution, it returned with ( hd0,0 ) and ( hd0,4 ). Why there are 2 bootloader in the Grub ? Which bootloader should I choose ? And for convenience, here is my " menu.lst " folder that I get via Terminal in Ubuntu 9.10 :

$ cat /boot/grub/menu.lst
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),

[code]....

View 9 Replies View Related

OpenSUSE Wireless :: 11.2 Repo - Module Ndiswrapper Not Found

Apr 24, 2010

I updated to the latest kernel from Suse 11.2 repo. My wireless device won't load firmwares, ndiswrapper won't be a module anymore etc. :

Code:
inux-kqzq:/home/olivier/T l chargement/fwextract3 # modprobe ndiswrapper
FATAL: Module ndiswrapper not found.
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /usr -name ndiswrapper
/usr/sbin/ndiswrapper
^C
linux-kqzq:/home/olivier/T l chargement/fwextract3 # find /lib -name ndiswrapper*
/lib/modules/2.6.31.5-0.1-desktop/updates/ndiswrapper.ko
linux-kqzq:/home/olivier/T l chargement/fwextract3 # uname -r
2.6.31.12-0.2-desktop
2.6.31.12-0.2-desktop is uname
and 2.6.31.5-0.1-desktop is the module

View 1 Replies View Related

Hardware :: Partport Module Is Seeing Parallel Port But Lp Module Doesn't Found Any Device

Mar 3, 2011

I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.

View 3 Replies View Related

OpenSUSE Install :: Recent Update Of Os11.3 Left System With Boot Failure / File Not Found

Nov 4, 2010

Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.

Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.

View 3 Replies View Related

OpenSUSE Install :: Update Failed. "No Fstab Found"?

Aug 31, 2010

I was trying to update (from 11.0) to 11.3. Booting from DVD, selecting root (after "show all partitions", because none was offered at all), there is a message "No fstab found." and then "Failed to mount target system".fstab on target root is definitely readable and OK. (this is a dd copy from my current system, which is fine.). The target root fs is ext4 (seems ok, see y2log):

2010-08-31 03:34:00 <1> linux(2988) [YCP] Storage.ycp:5041 DetectFs:/dev/sda5
2010-08-31 03:34:00 <1> linux(2988) [YCP] Storage.ycp:5054 DetectFs ret `ext4
2010-08-31 03:34:00 <1> linux(2988) [YCP] FileSystems.ycp:1026 GetMountString used_fs:`ext4

[code]....

View 9 Replies View Related

OpenSUSE Install :: Failed To Load Module "fglrx" (module Does Not Exist, 0)

May 8, 2011

I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:

Failed to load module "fglrx" (module does not exist, 0)

I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?

View 5 Replies View Related

OpenSUSE Install :: 11.1 - Filesystem Seems To Have Fatal Corruptions

Nov 6, 2010

OS openSuse 11.1
After boot its wrote: File system is clearn.
bootsplash: status on console 0 changed to on.
File system seems to have fatal corruptions.
Running with --rebuild-tree is required - failed
blogd: no message logging because /var file system is not accessible
enci-hcd ohci-hcd uhci-hcd usb-jhce fsck failed for least one file system (not /).
Please repair manually and reboot. The root file system is already mounted read-write.
What file I have to correct?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved