Debian Multimedia :: Nvidia Legacy 304 Under Jessie Is Broken
Feb 2, 2015
I recently updated my Debian Jessie and somehow that update broke my Debian. I have a Gtx 465 and this has been working fine under Jessie for a year.
After the update I no longer have X running. I tried removing all the Nvida stuff and reinstalling 304-legacy which did not get the Xserver back. I also tried to install Nvidia 304 driver binary but this time it refuses to compile ;( So I am out of luck at the moment.
I am runing Jessie Linux 3.18 Nvidia 465 Gtx Intel Cpu
Code: Select all built-ins
[ 41.306] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 41.306] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41.306] (II) Loader magic: 0x7ff757496d80
[Code] .....
View 8 Replies
ADVERTISEMENT
May 26, 2011
I recently installed the Nvidia proprietary drivers and I have a problem starting gdm. Xserver fails, only throwing a warning concerned to xkbcomp, something about ralt having two symbols... but just a warning anyway. Then, after waiting the screen flash between the tty and a black screen a few times;
i'm on the tty, from where I can "startx" without problem. I tried using the nv driver and gdm worked.. so i think it has relation with the nvidia drivers... If I start gdm from the tty, instead of using the startx command, then gdm appears but if I try to log in.. all freezes up.. Here's my xorg.conf generated by nvidia-xconfig: [URL]
View 6 Replies
View Related
May 24, 2015
I installed Sound Juicer but all it does is say "cannot read tracks". Playing the music CD works fine otherwise in other programs so it's definitely not the system or CD.
Tried on another computer with Jessie to be sure and I got the same thing there.
I suppose I can just use a different program but wondering if it's just me or if it's something to report ?
View 3 Replies
View Related
Jan 2, 2016
I was updating my system (sudo apt-get upgrade) and had several nvidia drivers proposed as "Suggested"... I changed the options for apt-get to include the suggestions, did the upgrade, and suddenly the normal size fonts in menus, along the "task bar", inside Chrome tabs and headers, and other places became too small for my old eyes to read.
I have tried Google and found issues within Gnome (mostly fonts too large).
I have tried removing the nvidia-driver so I could go back to nouveau (which worked fine) but the next time I updated my software table (sudo apt-get update ; sudo apt-get upgrade) the nvidia drivers seemed to return, even though I had purged the nvidia that I had removed... what remains on the system is:
Code: Select allglx-alternative-nvidia install
libegl1-nvidia:amd64 install
libgl1-nvidia-glx:amd64 install
libgl1-nvidia-glx:i386 install
libgl1-nvidia-glx-i386 install
libgles1-nvidia:amd64 install
[CODE]....
The motherboard is a Gigabyte AMD 9 Series FX Motherboards GA-970A-D3P; CPU is AMD FX-8350; video card is a GEForce 8400 gs; system has 32GB of 1866 RAM; a SSD for software and 750 GB spinning HD, both SATA III/6G.
I just want to be able to easily read the headings, and content in dolphin
View 14 Replies
View Related
Dec 12, 2015
I had some issues with nvidia drivers, and removed all of the packages using
Code: Select allrm /etc/X11/xorg.conf and Code: Select allapt-get purge nvidia*
Upon reboot, I was back with nouveau drivers and proceeded to reinstall nvidia drivers according to [URL] .....
Code: Select allapt-get install nvidia-driver
apt-get install nvidia-xconfig
I can then change my refresh rate using
Code: Select allnvidia-settings
but when I hit "Save to X configuration file", I get the following output in terminal:
Code: Select allroot@debian:/home/anon# nvidia-settings
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found
As a result, my nvidia preferences aren't saved across reboot.
Here are all of my sources:
Code: Select alldeb [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb-src [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb http://ftp.ca.debian.org/debian/ jessie non-free contrib main
deb-src http://ftp.ca.debian.org/debian/ jessie non-free contrib main
[Code] ....
System Specs:
Debian GNU/Linux 8 (jessie) 64-bit
Gnome Version 3.14.1
Processor: Intel® Core™ i7-4770K CPU @ 3.50GHz × 8
Graphics: GeForce GTX 780/PCIe/SSE2
View 6 Replies
View Related
Sep 9, 2011
I just tried to install KDE in Debian testing on the machine with Nvidia Geforce 7300 GS using Nvidia driver (280.13-1). However KDE breaks when compositing is enabled, and the only way to make it work is to disable compositing. This problem seems to exist for a while already:[URL].. Is it really Nvidia's problem, or something with KDE? Is there a point in contacting Nvidia about it?
View 4 Replies
View Related
Nov 22, 2010
Got a Gforce4 Ti 4400 graphics card. After installing 10.10 everything works but not optimal:
I cannot choose any visual effects under appearances. I don't have a NVIDIA menu. Can't use any of the features. When looking in the 'additional drivers' section, nothing shows up. Looking at some threads, I tried what is described in: p {margin-bottom: 0.08in;} [URL]
However, the result is crap. As described further down that thread, my screen goes to crap. So, re-installed everything again and I am now wondering if I should just give up. Not my nature though so here is my question:
My card is supported with the Legacy NVIDIA driver: 96.43.xx driver
Latest version on their website:
Version: 96.43.19 Certified
Release Date: 2010.11.16
Operating System: Linux
Language: English (U.S.)
File Size: 15.7 MB
This file is a .bin file. So what should I do. I read something like if you don't use something from the repository you have to re-install it every time Ubuntu's kernel is updated. However, does the driver in the repository support my legacy card. Is it wise to install the certified driver and how do I do that?
View 6 Replies
View Related
Feb 13, 2010
Does anyone know when or if the nvidia legacy drivers are going into Squeeze? I tried the ones in the Sid repos but ran into unresolvable dependencies. Lots of people were telling me that testing works just fine so I've been trying it out, but to be honest I've run into quite a few problems of this nature. I admit that I'm running a real Rube Goldberg mix of older and newer hardware on this box, but I wouldn't think it would be this much of a problem.
View 4 Replies
View Related
Nov 8, 2015
I've been using linux distros on my desktop forever, and got a windows 10 laptop recently. I want to dual-boot debain (jessie), so I installed it and it worked fine. Unfortunately, I have to enable Legacy mode in BIOS to boot into my grub then linux machine. Is there a way I can have my computer boot without legacy boot?
View 2 Replies
View Related
Jun 2, 2015
I've changed my /etc/apt/sources.lst file to use "jessie" repositories instead of "wheezy". I then ran synaptic and updated everything (there were loads of packages, something like 2000 to update).
After this I rebooted. The grub menu shows as usual with the background image I'd set and the operating systems as usual (including Windows 7) however there is no longer a 5 second countdown and when I select *any* menu option, it asks for a username and password.
I don't know what username and password it's asking for as I never used to have one set!!! I did have a username and password set up so that if you wanted to edit a grub menu option so I tried that but to no avail.
I'm using MBR/BIOS not EFI.
View 3 Replies
View Related
Jan 30, 2016
I was using Synaptic to remove unwanted sound & audio programs...it seemed to take out other files that were non-related ?
(1) Now apt-get complains about a "Held Package" and doesn't tell me the pkg name.
(2) Synaptic is broken...error..E: The value 'stable-updates' is invalid for APT::Default-Release as such a release is not available in the sources
E: _cache->open() failed, please report.
stable-updates isn't even in my sources list. I've purged synaptic, and re-installed but remains broken. When you close error msg synaptic disappears ? Therefore can't use synaptic at all.
(3) apt-get says many packages that were available are no longer available...like one of the main repos has disappeared ?
(4) I put the same repos that are working for my brother who is running Debian Jessie also, but didn't improve the number of missing available packages.
deb [URL] ....
deb [URL] ....
How or why things have gone so wrong from just removing unwanted sound pkgs.
To recap problems...apt-get held pkg....broken synaptic....unavailable pkgs.
View 4 Replies
View Related
Jan 2, 2010
I have 9.10 running on an old computer with a Nvidia Vanta-graphics card. Unfortunately these appearently aren't supported by 9.10, since the oldest nvidia drivers in the repository for this build are nvidia-gfx-96, while vanta seem to supported up to nvidia-gfx-71. After some hours of following tutorials, fiddling around and testing I managed to install the 71-drivers. But, the nvidia-settings require nvidia-xconfig to be around, which is embedded with later driver-builds but not with 71.
Fortunately I found a tar.gz at this page, so I downloaded it... but -and here is finally my question- where am I supposed to extract it to and are there other things I should do to get it working? Or, if I'm overcomplicating things, feel free to give me directions on what to do. Unfortunately I couldn't find anything on Ubuntu 9.10 and nvidia-gfx-71, hence I'm messing around for hours by now.
View 4 Replies
View Related
May 15, 2015
I have installed before with ease following the Debian how to. On jessie 8 I have an issue with black screen, probably miss configuration but can't figure what?
View 8 Replies
View Related
Aug 30, 2015
I've always used Debian with a single monitor and no need of proprietary drivers, because I usually don't do graphics or multimedia. Now I'm asked to set-up a machine with 3 nvidia video cards (770) and 4 monitors and everything went south. I started with just 2 monitors connected to 2 different video cards, not wanting to push my luck.
I installed a fresh Jessie and followed the instruction to install the nvidia drivers and tools from the Wiki. Everything went smooth. After reboot I executed (as root) nvidia-settings and I configured the two monitors to be one to the right to the other, with BaseMosaic option (at this point just one monitor was active) I saved the configuration to /etc/X11/xorg.conf , I even executed nvidia-xconfig as suggested, I rebooted and nothing happened, only one monitor was working, while the other -- looking again in the nvidia settings -- was still disabled.
I then tried with xinerama option and things are even worse, since now both monitors are black. I can login in one textual shell, but then I don't know what to do, since in my 10+ years of linux ... I never had to mess with X server. Is there a way to at least recover a working X without reinstalling everything?
View 0 Replies
View Related
Apr 17, 2015
I have Debian Jessie and I've been trying to install the Nvidia privative drivers. I've tried several ways to do it and all of them end in the same way. The last one I tried was installing bumblebee-nvidia and bumblebee with apt-get. The output was [URL] ....
With these two messages:
[URL] ....
[URL] ....
Then I restarted and runned nvidia-xconfig
Code: Select allWARNING: Unable to locate/open X configuration file.
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found
New X configuration file written to '/etc/X11/xorg.conf'
Finally when I restarted I cannot enter to Gnome... When I run xstart from the terminal I get an error saying: "No screens found", the final part of the log is this one [URL] ....
View 7 Replies
View Related
Nov 18, 2009
Greets all and congrats on the developers on bringing us another great version of Fedora. My box has an Nvidia GForce4 MMX 440 SE 64MB SDRam. I downloaded and updated from F11 to F12 last night. Before I went to bed It booted to a blank screen, GDM didn't want to start. I decided to investigate in the morning and went to bed. The first problem I found was that the F11 Legacy Nvidia Drivers were causing a problem, so I had to remove those. I also did an update with yum to get everything 100% updated. Then rebooted, more problems. GDM did NOT want to start for anything. More investigating found that the culprit was this nouveau kernel mod. Well, I had the xorg nouveau driver installed and I thought that this might be one in the same so I removed the xorg one with no avail, the nouveau kernal mod still loading. Seems that they are different and one is used for the xorg server and the other is used for the framebuffer console. I had to pass nouveau.modset=0 to the kernel at boot time to rid myself of the framebuffer. GDM starts now and I have resinstalled the xorg Nvidia nouveau driver though I have not tested it as of yet. Is there a better way at disabling the framebuffer boot up then by passing things to the kernel?
Edit: I take all that back. Upon further tinkering, reading, and investigation. The problem seems to be two fold: 1) The legacy nvidia drivers pissed and moaned about permission so I removed them. 2). This one I over looked and was causing me most of my grief. I didn't change the xorg.conf video driver from nv to nouveau. I did this and it works fine now. It seems that the "Linva-config-display" And I am sorry that I do not know exactly what this is at the moment. But this would automatically change the video driver from nvidia to nv if I manually changed it in the xorg.conf file after I removed the nvidia drivers. So I ASSUMED(my big mistake) that it would automatically see the nouveau driver and replace the nv with that. I was very wrong. After I added it manually, I rebooted and it runs fine now.
View 1 Replies
View Related
Oct 3, 2009
I can't get the Nvidia legacy drivers running. I've the following packages, which are the right ones for my kernel:
Quote:
and I added nouveau to /etc/modprobe.d/blacklist.conf and created a new mkinitrd which boots. But the X11 window system doesn't start up, so I checked if nouveau is loaded and it's really blacklisted. When I manually modprobe nvidia kernel driver I get the following error:
Quote:
FATAL: Error inserting nvidia (/lib/modules/2.6.30.8-64.fc11.i686.PAE/extra/nvidia/nvidia.ko): No such device
and some warnings from the module that 185.18.36 doesn't support my CPU.
My video card is:
Quote:
Try to figure this out for two days now. Rpmfusion is really frustrating for me
Adding vmalloc=256m to the kernel parameters and Option "ConstantFrameRateHint" "True" in xorg.conf also didn't help.
View 6 Replies
View Related
Mar 13, 2011
i tried installing the driver through the one click install (SDB:NVIDIA drivers - openSUSE) and through zipper, but system info says that the display driver is nouveau. here are my specs
opensuse 11.4
RIVA TNT2 Model 64/Model 64 Pro
View 4 Replies
View Related
Oct 9, 2010
I'm running a Geforce FX 5900 Ultra with nvidias 173.14.27 driver. I'm running slackware 13.1 with kernel 2.6.35.5.
I get a horrible slowdown which is noticeable in emulators such as bsnes and kega fusion. I also think it's responsible for other issues that involve zsnes flickering like mad and hanging. Zsnes will actually crash if I select any filter plugins with opengl output modes.
Kega Fusion slows down to a crawl (we're talking 10 fps) immediately before loading a rom. Playing a rom makes it even slower.
Bsnes has the same kinda slowdown as kega fusion (even worse since it's so cpu intensive) when I activate scanlines or any type of output filter with opengl. Otherwise with no filters and just plain opengl it seems to run fast like it should...
Gens-GS doesn't seem to enable any filters in fullscreen mode... They work however in windowed mode with no slowdown issues...
I've compiled and installed SDL 1.3 from hg repository, then recompiled bsnes just to test it with newer SDL. Unfortunately the problem persists even with a newer SDL version which thankfully for me means I can revert to the older stock SDL without having to recompile everything else haha!
It's funny because I thought these issues were related to the emulators and not the video card drivers. I had these issues for a couple years running ubuntu and trying other distros. When I installed Slackware 13.1 I decided to try my Radeon 9700 pro and kega fusion no longer had this slowdown issue! I switched back to my Geforce and installed nvidia's drivers and immediately had slowdown issues... I'm gonna switch back to the radeon card and test the other emulators but otherwise it'd be nice to know if there's a solution to this issue...
Ok I installed my radeon card: nvidia-installer --uninstall, then updated xf86-video-ati from 6.13.0 to 6.13.2. Even though kega fusion runs fine I get even worse problems with everything else! LOL so I'm going back to my geforce card.
View 2 Replies
View Related
Jan 8, 2011
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
View 5 Replies
View Related
May 25, 2015
I recently upgraded from wheezy to jessie and everything went as planned with dist-upgrade. However I just noticed that I can't play any video file. I thought about upgrading vlc, as it was already installed but it had dependency problems. So I tried to remove it
Code: Select allsudo apt-get remove --purge vlc
Then If I try to install vlc I receive this message:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies:
vlc : Depends: vlc-nox (= 2.2.0~rc2-2) but 2.0.3-5+deb7u2+b1 is to be installed
Depends: libvlccore8 (>= 2.2.0~pre1) but it is not going to be installed
Recommends: vlc-plugin-notify (= 2.2.0~rc2-2) but it is not going to be installed
Recommends: vlc-plugin-samba (= 2.2.0~rc2-2) but it is not going to be installed
Breaks: vlc-nox (< 2.2.0~pre2-2~) but 2.0.3-5+deb7u2+b1 is to be installed
E: Unable to correct problems, you have held broken packages.
Now, I thought about removing vlc-data but I received this message saying that 253 packages will be removed (624Mb worth of applications). Am I uninstalling my entire system with this?
This is my sources.list
deb http://ftp.us.debian.org/debian stable main contrib non-free
deb-src http://ftp.us.debian.org/debian stable main contrib non-free
deb http://ftp.debian.org/debian/ jessie-updates main contrib non-free
deb-src http://ftp.debian.org/debian/ jessie-updates main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free
I'm running
3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) x86_64 GNU/Linux
Running aptitude offers to remove this 260+ packages, so I'm not happy with that.
View 14 Replies
View Related
Dec 29, 2015
Here's the thing:
- Debian boots normally
- I get the login screen
- Once my credentials entered, I see only the grey foreground of the login screen for a couple of seconds, then a black screen with a prompt for like half a second and then I'm back to the login screen. No error message, nothing.
When booting in recovery mode and use startx, it works fine (it's my setup at the moment). From there, if I start gdm3 (systemctl start gdm.service), I get the black screen with a prompt and I can do nothing, I have to shut down directly by pressing the button.I tried to add Debian-gdm user to the video group (even if I don't use nVidia drivers), to replace gdm by lightdm and even to remove any display manager but the issue is not solved.Here are some outputs:
Code: Select all# dpkg-reconfigure gdm3
Job for gdm.service failed. See 'systemctl status gdm.service' and 'journalctl -xn' for details.
invoke-rc.d: initscript gdm3, action "reload" failed
Code: Select all# journalctl -xn
-- Logs begin at Tue 2015-12-29 19:16:26 CET, end at Tue 2015-12-29 20:20:55 CET
[code]....
Since removing gdm didn't change anything, I assume it doesn't have anything to do with it but still.
View 10 Replies
View Related
Dec 29, 2014
I'm trying out a Jessie install and have noticed VNC doesn't work as well as it used to. I often install a desktop environment on a headless machine, disable *dm, and use vnc4server to create a desktop session if I want to use a GUI. When I try to do the same on Jessie, I run into problems.
Using Gnome, all I get is the generic "Oops something went wrong" error. Looking at .xsession-errors, there are some errors that hint at the problem.
Code: Select allXsession: X session started for ryan at Mon Dec 29 06:07:30 CST 2014
X Error of failed request: BadValue (integer parameter out of range for operation)
Major opcode of failed request: 109 (X_ChangeHosts)
Value in failed request: 0x5
Serial number of failed request: 6
Current serial number in output stream: 8
[Code] ....
Some possibly related bugs: [URL] ...
The same thing seems to happen with Cinnamon. Since I doubt a fix for the above issue will make it into Jessie, I tried XFCE. However, that doesn't work correctly either. When running XFCE via VNC something is misreporting the version of xrandr as 1.1 instead of 1.4. Since xfsettingsd appears to want version 1.2+, many things are broken.
This post on the Ubuntu forums suggests the issue might be fixed in xfsettingsd version 4.11: [URL] .....
Is there a better way of getting a remote desktop in Jessie that I'm overlooking?
View 0 Replies
View Related
Feb 20, 2015
I am using Jessie. 64 bits. I have been using Sound Converter in other distros (LMDE, Ubuntu, etc) in the past.Jessie has Sound Converter 2.1.3. I think I have installed the needed codecs. When I try to convert from mp4 to mp3, the program gets stuck, and nothing happens. Other formats can be converted.
When I use SoundKonverter (also in Jessie, version 2.1.1) it works with no problem, converting from mp4 to mp3. Nevertheless I would prefer to use Sound Converter.
View 2 Replies
View Related
Mar 2, 2015
A few weeks ago I have installed Debian Jessie on KDE Desktop Version. I have a problem with the Display Manager Kdm, if i log out session the monitor turns off (DVI No Signal), the only option that I have it's forced shutdown or reboot via power button. I try another DM lightdm and this works fine. But i liked to know why log out session crash on Kdm.
Adding : TerminateServer=true at the end of /etc/kde4/kdm/kdmrc (Section :[X-:*-Core], solve the issue.
View 2 Replies
View Related
May 19, 2015
I recently decided to buy a new pc and install only one operating system: Debian.
The PC has an Intel Core 2 Duo, 4GB of RAM and installed Linux 3.16.0-4-amd64 with desktop KDE SC 4.14.2
I can use it for a while, but it always ends with the same problem: All the windows turn black, except the edge.
Furthermore, in the application launcher menu, the edge only appears, like when I make right click on the desktop.
They appear completely transparent. Only be solved by restarting the PC.
View 2 Replies
View Related
May 26, 2015
Is there a way to get Oracle virtualbox on Jessie yet? I only see one for wheezy at the oracle site.
View 3 Replies
View Related
May 31, 2015
I'm trying to install KDEConnect on my 64 bit Debian system. It's failing because of dependencies.
Tried installing the first dependency, sshfs. It said it cannot find the 64 bit package. So, I tried the 32 bit. That one depends on fuse. Tried to install fuse 32 bit. hat depends on sed. Tried installing 32 bit sed, but the package manager said it's risky to replace 64 bit sed with the 32 bit variant.
I stopped here thinking that I'm risking some stability and the road to the finish line is not visible till the end, meaning I might lose hours trying to do something that fails at the last step. This happened to me few times in the past (with other software) and I really don't want to repeat the incident. I need a stable system and I need my time.
The question is: how to get installed kdeconnect package on Jessie 64 bit ...
View 12 Replies
View Related
Aug 22, 2015
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2275.960] X Protocol Version 11, Revision 0
[ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
[Code] .....
View 2 Replies
View Related
Aug 27, 2015
I'd like to have acestreamplaer installed in jessie, but I am not able to do it....
I tried with
Acestream repos:
deb http://repo.acestream.org/ubuntu/ saucy main
But I cant install it, I got this
acestream-player-data : Depende: libavcodec53 (>= 4:0.7-1) pero no es instalable o
libavcodec-extra-53 (>= 4:0.7-1) pero no es instalable
Depende: libavformat53 (>= 4:0.7-1) pero no es instalable o
libavformat-extra-53 (>= 4:0.7-1)
Depende: libavutil51 (>= 4:0.7-1) pero no es instalable o
libavutil-extra-51 (>= 4:0.7-1)
Depende: libdvbpsi7 (>= 0.2.0) pero no es instalable
Depende: libupnp4 pero no es instalable o
libupnp3 pero no es instalable
Depende: libx264-120 pero no es instalable
View 6 Replies
View Related
