Fedora :: Can't Undo Wrong Resolution In 10/Gnome?
Mar 28, 2009
setting a resolution that my monitor can't handle, and now I can't figure out how to get back to a setting that my monitor can handle. When I first made the bad setting, the screen went black except for an "Out of Range" message in the middle, and wouldn't let me see anything to put it back. I ended up going to a text screen with a <Ctrl-Alt-F1>, logging in as root, and rebooting. Now, I can use all of my other user IDs (root, KDE test, "email only," etc.) just fine, but if I log in to the one with the bad res. setting, it just blacks the screen and I have to reboot again. The xorg.conf file doesn't even have any options for setting resolutions any more, so there's no way to explicitly disallow the one I set, and "deleting" (renaming) xorg.conf didn't help.
View 8 Replies
ADVERTISEMENT
Apr 7, 2011
I've borrowed a copy of 11.4 DVD install disc from someone at work, everything went fine install wise. Except Grub taking control, which I didn't ask it to, but easy fix with yast, problem is firstly my graphics resolution is wrong, but I'm trying to work that one out myself as it always seems to be happening with distros I use on my machine. The weird thing is my desktop blinks! Every 10secs or so the whole screen goes blank and then reappears? I thought it might be the wrong refresh rate, but that's at 60Hz which is correct, would it be the resolution problem?
My hardware:-
P4 2.8
1Gb ram
Geforce FX 5500
Dell 1703FP monitor
I was trying to running diagnostic's from Opensuse, but the blinking was getting on my nerves and I'm not familiar with a non Debian based OS......yet! I've got compiz and all running on the hardware in my Ubuntu install after editing the xorg.conf, could I simply copy that to my Opensuse install?
View 8 Replies
View Related
Nov 18, 2009
I have no other gripes but one minor problem; After the boot, the KDE4 desktop starts with a resolution of 1152x864 instead of 1280x1024 selected at display settings. Strangely, it seems to activate the correct resolution instantly when I enter the display settings menu that shows the intended resolution (no need to apply anything). Going to the settings menu is a bit bothersome after every boot.
View 2 Replies
View Related
May 2, 2011
I've just upgraded from Debian Lenny to Squeeze. It didn't go as smoothly as I had hoped, one of the casualties being the proprietary nvidia driver I had previously installed. So I fixed that using the 'Debian way' rather than NVIDIA's installer, and that is now all fine. So far so good. However, when I boot up, pre starting X, my screen is a much lower resolution than it used to be (640x480, I think). Really chunky and ugly as it runs through the start up scripts. I assume that somewhere early in the startup scripts the nvidia driver is being loaded and set to a low resolution. Can someone advise me where this might be, and what to look for? Am I on the right track? I stress that this is before X is started. Once X has started the screen resolution is as I want.
View 4 Replies
View Related
Sep 3, 2010
Sometimes, randomly, when turning on my Ubuntu laptop (HP 6730b, Ubuntu 10.04) I get a wrong monitor setting (much lower resolution than normal) and it is not possible to set it correctly because the menu buttons are wrongly placed and some are not present (probably there is not enough room for them) I have no other way than to restart the system to get the right resolution. Can someone tell me this inexplicable (to me) behaviour? Of course I didn't change anything in monitor settings...
View 3 Replies
View Related
Jan 14, 2011
My Acer AspireOne netbook has a native resolution of 1024x600. Most times I start up, the image is 800x480 against the left edge, black bar on the right side, and a repeated image at the bottom. (I can attach a picture if needed.)I've been seeing this problem since Ubuntu 9.10, but it's more common recently with 10.10. If I keep shutting down and powering back on, eventually it will come up in 1024x600 as I desire. If that happens, then I avoid shutting down and only use Suspend instead. However, anytime I need to reboot (for updates, etc.) the 800x480 comes back.
The Acer logo / BIOS splash screen is also in 800x480, but I only see it switch back to 1024x600 after Ubuntu loads and is shut down. (Repeatedly clicking on/off/on/off never results in the resolution changing to 1024x600.) So, I'm still suspicious that Ubuntu is causing this (no hardware). WinXP used to be on this machine, and the problem was never seen.I don't think any proprietary drivers are needed (but I am still a Ubuntu noob.) When the problem is occurring, I see this result for xrandr:
Code:
swope@netbook:~$ xrandr
Screen 0: minimum 320 x 200, current 800 x 480, maximum 4096 x 4096
VGA1 disconnected (normal left inverted right x axis y axis)[code]....
I haven't been able to find xorg.conf ... but I've read that recent versions of Ubuntu create the content dynamically.Not sure what other details I should be including, at the risk of making this post too long.
View 8 Replies
View Related
Mar 20, 2011
i got a dell computer running ubuntu. it is equipped with an ATI radeon 5450, using a dell IN2010 1600x900 screen. when i installed ubuntu, the resolution was just fine. then i installed the ATI driver, and from that moment on, i have that strange behaviour: when i start ubuntu, the resolution seems set to 1440x900, but stretched to wide-screen mode, so the font is somehow blurry. when i turn the monitor off and then on again, everything is just fine.i have catalyst control center installed, and the resolution is set to 1600x900, but i still have the problem that i described.
View 7 Replies
View Related
Jun 3, 2011
every since I installed natty in march my refresh rate has been wrong this makes it where I can not see the boot screen, this was not a big problem until I installed the developmental version of ubuntu to test for bugs and I can not see the boot screen, I went to the page that tells how to change the rate but I get this error when I ran xrandr Failed to get size of gamma for output default. This showing my monitor as default it does not show a name, I manually set it up in x server and it shows the correct rate and the correct monitor, but not in monitor preferences.
[URL]
View 4 Replies
View Related
Jun 26, 2011
I have installed Debian Lenny with LXDE on a Dual USB 500Mhz iBook g3 the login screen appears displaying the screen using "800x600" pixels with the screen resolution at "1024x768" - so the login screen fills 2/3 of the LCD with black space to the right and the image repeating itself in the bottom 1/3 of the screen The "System Tools" > "Monitors Settings" only list one setting size of "800x600" and "Auto" After trying to search for answers I have tried editing the /etc/X11/xorg.conf file (after stopping gdm and rebooting afterwards)
# ... after these lines
Section "Screen"
Identifier "Default Screen"
[code]...
But nothing changes.
I have also tried [ dpkg-reconfigure xserver-xorg ] but there is no prompt for resolution
View 5 Replies
View Related
Feb 25, 2010
I'm running OpenSuSE 11.2 with an Nvidia GeForce 8200 on board graphics card and am running the drivers installed from the file NVIDIA-Linux-x86-190.53-pkg1.run which I obtained from the Nvidia web site. I also have this vga directive on the kernel line in /boot/grub/menu.lst vga=0x346 Yet, sometimes when the system starts up it will go into 640x480 mode instead of 1680x1050. If I shutdown and restart a few times it will eventually come up in the proper resolution.
View 4 Replies
View Related
Jun 15, 2010
I have problem with resolution (@gnom desktop). In Yast --> videocard & monitor is all right. There is correct resolution 1366x768 (WXGA). Also the videocard ( I don't have really one, only chipset "Intel Mobile GM45" ) is correct recognized. But Monitor isn't recognized, and I don't know which one I have (It's notebook from acer).
Nevertheless if I go direct in monitor preferences (at the bottom the monitor with a ruler symbol) the resolution is set to 800x600 and I can only change to 640x480. The monitor is as 15" recognized (I have 15.4", even a bit more broadly - 1366x768) and now I don't know what to do. All symbols, all programs, everything is huge! How is it possible to configure the correct one resolution?
View 6 Replies
View Related
Oct 24, 2010
I've got a HD screen: 1920x1080p. Grub (1.98 ) has the resolution: 800x600 and Plymouth also. It is irritating me that plymouth shows a very ugly purple splash screen in a very low resolution (800x600). How can I fix that? I've got an ATI Radeon HD 4670, and use the drivers from ATI...
View 8 Replies
View Related
Aug 23, 2011
I installed Ubuntu 11.04 about a week ago and everything has been fine except that Ubuntu thinks my monitor has a resolution of 1024x768, while the actual resolution is 1366x768. I can't set a higher resolution through the visual interface (my monitor is detected as "unknown") Are there commands I can issue through the terminal to sort this out?
View 6 Replies
View Related
Jul 25, 2010
I am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
View 2 Replies
View Related
Feb 11, 2010
i have just tried ubuntu 9.10 runing the "try ubuntu without changing" mode and the screen resolution was totaly off, it was 800 x 600 and there was only one other optinion wich was even worse , my screen res on windows is 1366 x 798.... Is this a problem that would rectify itself if i installed ubuntu properly or is there something i need to do?
View 9 Replies
View Related
Mar 2, 2010
On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...
View 2 Replies
View Related
Apr 26, 2011
I'm new to linux, and i have installed linux slackware 64bit..after a complete setup i downloaded the latest Nvidia proprietary drivers, the binary package from nvidia.com..i have a geforce gts250..it's the first time i encounter this issue..i have already installed the driver with my old monitor (an lg flatron with max 1680x1050)and it always worked fine..with this new monitor (lg w2243s with a res of 1920x1080) it seems that every bin package from nvidia don't recognize the monitor...after installing i find a res of 640x480 and i get stucked, i tried to force it by editing the xorg.conf file..but nothing changes..how can i get the max res with nvidia bin package?
View 3 Replies
View Related
Jan 21, 2010
in my media pc i have a geforce 8400, attached to a 32" 720p lcd using a dvi to vga adapter, and it is miss detecting the resolution it detects the resolution as 1080p, so when i try to enable full gpu scaling it gets the resolution wrong resulting no image on the screen. how do i manualy set the "back end resolution"
View 6 Replies
View Related
Sep 20, 2010
on an older computer. I get as far as the screen that asks if I want to try or install and then I get a message saying the screen resolution is wrong and I need to reset. I even disabled the hard drive in bios and still get this message. computer was built to run xp and had ubuntu on it before. I tried to upgrade the nvidia driver and broke it.
View 3 Replies
View Related
Apr 22, 2011
I have a desktop with nvidia 9300 connected to a 37" LG hdtv lcd with a VGA analog cable. I'm using this machine as a media center. Up until now it had a windows XP and (besides the fact that it had windows) it work with the correct resolution - 1920x1080. I've installed Ubuntu (the latest available) after to many crashes during hd movies...
I installed the nvidia restricted drivers (the display is plain black otherwise) and my tv is being recognized as a CRT monitor. Guess it's because I'm using the vga connector instead of the dvi one. The problem is that the highest resolution it let me choose is 1024x768. I tried to mess around with the xorg.conf but i discovered it doesn't exist.
View 1 Replies
View Related
May 12, 2010
I've installed Ubuntu 10.4 and the gnome-panel appears half, as you can see in the attached picture, if I try resolutions over 1024x768.If I kill the gnome-panel and it restarts, or if I change its properties, it became OK, but in startup it appears like the image.I've tried other Gnome 2.3 based distributions and occurs the same issue. With Gnome 2.28 it doesn't occurs. Then ii seems a gnome 2.3 problem.
PD: My grafic card is a Matrox G550.
View 6 Replies
View Related
Jan 8, 2011
I just installed drivers for this nVidia GPU from the website. Now, whenever I boot, the screen resolution goes to 1024x768 instead of 1280x800 like I want it to. I have to change the screen resolution every time I boot into Ubuntu.
View 5 Replies
View Related
Jan 14, 2010
I just started a new SysAdmin job on Monday Jan 11, 2010. My predecessor left before I joined the company with NO documentation. All of the system mail (alerts, error messages, informative messages, etc.) that's going to root is being redirected to my boss. I checked .mailrc and /etc/aliases for an alias that would equate root with my boss, but couldn't find anything. My boss doesn't want to be receiving these emails. Where else can the previous SA could have done this operation. How can I sub my email address for that of my boss' to be receiving these alert messages.
View 6 Replies
View Related
Jul 4, 2010
I downloaded all the nvidia modules from yum repos. Now fedora will not boot. Seems to fail as xwindows starts. How I can undo those modules from the live disk? I've tried removing blacklists from etc/modprobe.d. and the .ko files from /lib/kernel/drivers//. My next alternative is to do what the windows lot do. Backup and re-install.
View 3 Replies
View Related
Sep 23, 2010
Two weeks ago I consumed all available FC13 updates. It was a terrible mistake. After that my my PC does not function properly and I have no clue how to fix it. I would like to get my PC in the previous (healthy) state. Is there an easy way to undo the updates? More than 60 packages were updated, but I do not remember which ones.
View 11 Replies
View Related
Feb 21, 2010
Basically, About 50% of the time, the system boots and sets the console resolution to something strange, and the console renders in a small box in the top-left hand corner of my screen. This causes problems not only with the display of the console, but with the display of X as well.
I have an Intel GL40 chipset on this laptop, with an integrated GMA4500 GPU. I am using the latest stable Intel video drivers (2.10.0-1), and have tried using the git drivers. In addition, the problem has been occuring since December, when I install Arch linux on this machine, I have just now had the time to address it. So basically, the issue has persisted with all driver versions since mid-December to the latest releases.
In addition, I have tried using several kernels, including:
But the problem persists with each.
I wish I could give you relevant diagnostic information for this issue, but if I had any idea where to start...
I will gladly post any information necessary. I was going to post a copy of everything.log for a successful and unsuccesful boot, but unfortunately they put me over the posing limit by about 100,000 characters each.
I guess, on second thought, that my Intel video driver really wouldn't have anything to do with my console, now would they?
View 9 Replies
View Related
Sep 5, 2009
not paying attention, I cntrl D and blocked a site that I'm using in my research. what command to undo the cntrl D to unblock site
View 2 Replies
View Related
Aug 5, 2011
I'm using Ubuntu 11.04 with Gnome 2 (a.k.a. the "Ubuntu Classic" shell) and the "New Wave" theme from the official repositories.
This installation started out as 10.04, and was then immediately upgraded to 10.10. I had to do that because 10.10 wouldn't install directly because of some bug.
It worked fine until I upgraded to 11.04, now I've got a bug whereby Qt apps don't render properly.
See the image here:
Now if I open the "Qt 4 Settings" tool and set it to Cleanlooks:
As you can see, it works correctly with Cleanlooks, but with it set to "Desktop Settings (default)", it is impossible to see the current selection, dividers etc.
This affects all Qt4 applications.
I have tried installing the package including the theme from 10.10 and that didn't help so I'm inclined to think it's not New Wave that is at fault here. Perhaps it's something that was changed for Unity?
(I'd rather not switch to a different theme, this one works for me. And I'd switch to Linux Mint but I've got all my stuff set up on here )
View 1 Replies
View Related
Mar 29, 2011
I have just installed openSUSE 11.4 a few days ago, and added nvidia propietary drivers.
After that, buttons that are selected are with two white lines. One on the top, and one on the left. I don't know what is it all about, but I think it may be nvidia's problem.
View 6 Replies
View Related
Jan 1, 2011
After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
View 2 Replies
View Related
