General :: Kernel Mode Setting Sets Wrong Resolution On Console/Intel GL40/several Kernels
Feb 21, 2010
Basically, About 50% of the time, the system boots and sets the console resolution to something strange, and the console renders in a small box in the top-left hand corner of my screen. This causes problems not only with the display of the console, but with the display of X as well.
I have an Intel GL40 chipset on this laptop, with an integrated GMA4500 GPU. I am using the latest stable Intel video drivers (2.10.0-1), and have tried using the git drivers. In addition, the problem has been occuring since December, when I install Arch linux on this machine, I have just now had the time to address it. So basically, the issue has persisted with all driver versions since mid-December to the latest releases.
In addition, I have tried using several kernels, including:
But the problem persists with each.
I wish I could give you relevant diagnostic information for this issue, but if I had any idea where to start...
I will gladly post any information necessary. I was going to post a copy of everything.log for a successful and unsuccesful boot, but unfortunately they put me over the posing limit by about 100,000 characters each.
I guess, on second thought, that my Intel video driver really wouldn't have anything to do with my console, now would they?
View 9 Replies
ADVERTISEMENT
Jan 9, 2010
Just installed Fedora 12 on my Dell Precision M4400 and I'm trying to install the Broadcom wireless driver. When I try to compile the driver, I get:make: *** /lib/modules/2.6.31.5-127.fc12.i686/build: No such file or
directory. Stop.So I followed the link and /lib/modules/2.6.31.5-127.fc12.i686/build is a soft link:lrwxrwxrwx. 1 root root 47 2009-11-09 14:17 build -> ../../../usr/src/kernels/2.6.31.5-127.fc12.i686But in /usr/src/kernels all I see is:
total 12
drwxr-xr-x. 3 root root 4096 2010-01-09 11:56 .
drwxr-xr-x. 4 root root 4096 2009-11-09 14:10 ..
[code]....
View 5 Replies
View Related
May 6, 2010
I have a Asus EEE PC 1005P which I installed a Command-line system on using the Alternate Installer CD of Ubuntu Lucid Lynx. Altough I think this is a general linux and grub2 question. I do not have (or want) the X Window System installed. I want to change my console screen resolution (not inside X) to 1024x600. But it isn't reported when I use vbeinfo inside grub:
grub> vbeinfo
VBE info: version: 3.0 OEM software rev: 1.0
total memory: 8128 KiB
List of compatible video modes:
Legend: P=Packed pixel, D=Direct color, mask/pos=R/G/B/reserved
0x112: 640 x 480 x 32 Direct, mask: 8/8/8/8 pos: 16/8/0/24
[Code]...
Does it mean I have the driver? how to set it to 1024 x 600 in grub2?
View 1 Replies
View Related
Mar 18, 2010
I was installing some packages yesterday, I think one of them was an update for grub. (I'm using grub 2). When I rebooted, the console text was in green, not the usual white. (using gfxpayload=800x600 i.e. console is in graphics mode). I first thought maybe it was some kind of St. Patrick's day joke, but now I am getting tired of it. How do I set the color scheme back to normal?
View 7 Replies
View Related
Dec 26, 2010
Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies
View Related
Apr 28, 2011
I have squeeze installed on the old hardware DELL GX260.Howto disable completely kernel-mode-setting (KMS) on squeeze?I've tried to add /etc/default/grub:
Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet nomodeset"
and change in /etc/modprobe.d/i915-kms.conf:
[code].....
View 2 Replies
View Related
Oct 14, 2010
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies
View Related
May 2, 2011
I've just upgraded from Debian Lenny to Squeeze. It didn't go as smoothly as I had hoped, one of the casualties being the proprietary nvidia driver I had previously installed. So I fixed that using the 'Debian way' rather than NVIDIA's installer, and that is now all fine. So far so good. However, when I boot up, pre starting X, my screen is a much lower resolution than it used to be (640x480, I think). Really chunky and ugly as it runs through the start up scripts. I assume that somewhere early in the startup scripts the nvidia driver is being loaded and set to a low resolution. Can someone advise me where this might be, and what to look for? Am I on the right track? I stress that this is before X is started. Once X has started the screen resolution is as I want.
View 4 Replies
View Related
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
View Related
Jul 25, 2010
I am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
View 2 Replies
View Related
Mar 2, 2010
On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...
View 2 Replies
View Related
Feb 22, 2011
I am using a virtual pc software called VMWare workstation ver 7.1. platform win 7. I installed a redhat linux 5 in vmware. I am able to access graphical mode but unable to access the console mode (ctrl+alt+f1....f6).
View 4 Replies
View Related
Dec 26, 2010
I'm brand new to ubuntu and very green when it comes to Linux in general.I have recently installed Ubuntu Desktop version 10.10 for my media pc (a friend of mine showed me xbmc, awesome!). I modified my install so that I don't have to enter a password when turning it on.The problem seems to be that when I did the install I chose to encrypt my home directory. Now, since I don't enter a password, the machine spews a few errors and does nothing. I finally got it to boot to a console window however I don't know how to undo what I did from the gui.I'm basically trying to get to System > Admin > Login Window > Security without the gui and "check the box" to require a password on login.Any clue as to which config file this setting is stored in?
View 5 Replies
View Related
Oct 13, 2010
During startup (suse linux old distro) LILO immediately after stratup procedure I can see login for about 1 sec and then Xserver starts. I'm unable to kill it with Ctrl+Alt+Backspace or Ctrl+F1..So the question is: is there any way I can force linux to boot into console mode before it starts xserver? (I'm unable to modify any files since I cannot reach the consol mode)?Is there any shortcut ky I need to press during boot in order to prevent GUI from starting?
View 5 Replies
View Related
Aug 31, 2010
What seems like forever ago now I tried to install Linux on this Intel 82855GME chipset laptop I was given. I started off with Fedora because it's what I'm most familiar with, unfortunately the live disk would crash at GDM so I could never get anywhere with it. Even doing a console based install would crash, but it at least pointed me in the right direction, it seemed the kernel was crashing for some reason (see image)Fedora livedisk crashlivedisk-error.jpg (95.96 KiB) Viewed 695 times
View 14 Replies
View Related
May 27, 2011
I'm running kind of a mix between Wheezy and the occasional package from Sid. I've got the 2.6.32 kernel installed, as well as 2.6.38 and 2.6.39.
With the first kernel (2.6.32), my sound is normal, everything works fine. With the latter two, even using the same driver, my sound is quiet even with the volume up all the way, not to mention that somehow the available volume controls change along with this update. I was wondering if anyone else has experienced something similar, and if they managed to fix it or work around it without just booting into the older kernel?
View 2 Replies
View Related
May 8, 2011
When I run yum list installed command the output shows two kernels:
[Code].....
Would it therefore be safe to remove the first kernel in the installed list to save having two kernels being updated everytime I run yum update? Or is the PAE kernel dependant upon the original?
View 6 Replies
View Related
Nov 3, 2010
How to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup.
The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen). But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor?
View 1 Replies
View Related
Mar 2, 2010
I have a IBM ThinkCenter workstation with an Intel i810 chipset and can only get a resolution of 800x600 maximum. I have read this url dealing with this chipset and resolution and cannot get anything past 800x600.http://www.freebsd.org/doc/handbook/x-config.htmland here is my /etc/X11/Xorg.conf
PHP Code:
Section "ServerLayout" Identifier "Default Layout" Screen "Screen0" InputDevice "Keyboard0" "CoreKeyboard"EndSectionSection "InputDevice" Identifier "Keyboard0"
[code]....
View 2 Replies
View Related
Feb 8, 2011
When I first installed ubuntu 10.10, the display was for some reason tinted green and shifted a few inches to the right. After experimenting with the resolution preferences, I eventually got it to a large resolution (1280x720 ... or something like that) yet is was quite blurry. I found out that the problem was with my monitor after I switched it to TV mode, then back to PC mode. It became perfectly clear! All I had to do then was adjust the screen positioning by shifting it left a bit.
Even though I have made the resolution I figured out to be default, whenever I turn the PC on after shutting down, it goes back to the "green-and-to-the-side" mode. :/ Ain't really a big problem, until I tried to fiddle with the resolution preferences s'more.
Somehow, I have set it to be twice as wide of the maximum my monitor can display, went back to being green tinted for some reason, and is completely shifted left (yet the right side is still visible) This means that I cannot see what is going on the left side, and cannot adjust the resolution preferences, nor can I click blindly cuz the border is only around my visible side of the screen. Now it is stuck like this.
I've researched many hours and eventually found the terminal command for the resolution preferences. it popped up on the visible side. Although it was to no avail cuz I HAVE TRIED EVERY SETTING AND OPTION and absolutely nothing changed. I assume a system restore would simply revert it back to the previous satisfactory settings, but the thing is I want to FIX it. I am new to this terminal stuff, so I want to learn it and all that. To put it simply, here's what I want:
Learn how to manually adjust resolution without depending on a simple dialog box. Make the satisfactory resolution default and consistent through turning it on and off. Link that could teach me the essential commands, all this googling is stressful. D:
View 3 Replies
View Related
May 8, 2011
I just installed Opensuse 11.4 (gnome) in a new desktop but the screen resolution is 1360x768 60hz and this is not listed in monitor settings, so the monitor keeps displaying "not optimized mode" message. In order to use the correct resolution, I used these two commands:xrandr --newmode "1360x768_60.00" 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsyncxrandr --addmode VGA1 "1360x768_60.00"it worked, but every time the computer is restarted, I must run this command again. So I think "I just have to create a script in the initialization!". It works, every time the computer is started, there is no need to run the commands again. But when program enters in full screen, the resolution is "lost" and the monitor message is displayed again.
View 7 Replies
View Related
May 2, 2011
I'm running Scientific Linux 5.5 (equivalent to CentOS 5.5), and over the past two weeks, I have had a problem with my root partition filling up, preventing anyone from logging into the server.After searching for large files, and finding none, I was mystified when du told me that the root partition had only 660 MB of disk space used, whilst df showed it full. The problem was this: the /var/crash directory had been filled up by an 8GB crash file. Now, I'm a 'proper' sysadmin and make sure that /var has its own mount point, so the crash should not have touched the root partition at all. Except it did - instead of writing to /var/crash on /dev/mapper/VolGroup00-LogVol04 which is mounted as /var, it wrote the file to /dev/md0 directly, so when all the file systems were mounted, those files were hidden under the mounted /var.
View 4 Replies
View Related
Aug 8, 2010
I have been running kernel-2.6.33 (gentoo) with a graphical console which appears after the grub screen. My kernel parameters include `vga=0x317'. Since I upgraded my kernel I have only been able to get a 80x25 text console. If I use `vga=0x317' I get a black screen after the grub prompt. I have tried using `vga=ask' and choosing a number of resolutions - with no luck.
I've tried a "vanilla" 2.6.34 config and also a bootable Sabayon Linux disk with 2.6.34 - with the same result. Interestingly Sabayon Linux eventually fired up X successfully - after a black screen while it was booting.
Its looking like 2.6.34 doesn't like my hardware.
Here is some info about my hardware:
# lspci
Here is my kernel config (relevant bits):
View 11 Replies
View Related
Mar 21, 2010
i need drivers for monitor 17' adi nh 776 for linux bt4.because i cant change resolution at nvidia xserver setting...
View 6 Replies
View Related
May 12, 2011
I'm trying to setup openVPN on debian, well this worked. But every client will get the same ip (172.17.0.6 - local it is). how to set my server in bridge mode. I've read about: server-bridge LOCALIP 255.255.0.0 172.17.1.20 172.17.1.100
BUT, my server has no ipv4 address, but only ipv6: 2001:41d0:2:b2d6::542a:74a so I am not sure how I can do this.
View 1 Replies
View Related
Nov 16, 2010
I've recently installed a new graphic card after my old one started to go belly-up and it works nicely in X with twinview. The card have one VGA, one DVI and one HDMI. I have the monitor connected to the VGA and my projector connected to the DVI. However, when I boot the monitor (VGA) don't receive a signal. It is dead until X comes up (and when X comes up it does exactly what I want, it uses the VGA monitor as the main screen).
I had this setup on my old card to and it worked fine. Grub and boot console showed on both screens and I never had to tweak anything to make it do this.
how to enable the VGA outlet, either have boot enabled or only the VGA enabled (either way is fine by me but I really want to see Grub and the boot console on startup).
View 9 Replies
View Related
Jul 8, 2010
I'm guessing the answer to my question is in manipulating the kernel command line. But with what arguments? (and does the kernel have it's own fonts to be used on a FB device?)
The host is a ARM9 based embedded system with a 1-bit LCD screen.
This is a prelude question to: Naming a Frame buffer Device
View 1 Replies
View Related
Feb 11, 2010
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
View 6 Replies
View Related
Nov 18, 2009
I have no other gripes but one minor problem; After the boot, the KDE4 desktop starts with a resolution of 1152x864 instead of 1280x1024 selected at display settings. Strangely, it seems to activate the correct resolution instantly when I enter the display settings menu that shows the intended resolution (no need to apply anything). Going to the settings menu is a bit bothersome after every boot.
View 2 Replies
View Related
Mar 28, 2009
setting a resolution that my monitor can't handle, and now I can't figure out how to get back to a setting that my monitor can handle. When I first made the bad setting, the screen went black except for an "Out of Range" message in the middle, and wouldn't let me see anything to put it back. I ended up going to a text screen with a <Ctrl-Alt-F1>, logging in as root, and rebooting. Now, I can use all of my other user IDs (root, KDE test, "email only," etc.) just fine, but if I log in to the one with the bad res. setting, it just blacks the screen and I have to reboot again. The xorg.conf file doesn't even have any options for setting resolutions any more, so there's no way to explicitly disallow the one I set, and "deleting" (renaming) xorg.conf didn't help.
View 8 Replies
View Related
